#
# Miscellaneous I2C chip drivers configuration
#
+# *** DEPRECATED! Do not add new entries! See Makefile ***
+#
menu "Miscellaneous I2C Chip support"
- depends on I2C
-
-config SENSORS_DS1337
- tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for Dallas Semiconductor
- DS1337 and DS1339 real-time clock chips.
- This driver can also be built as a module. If so, the module
- will be called ds1337.
-
-config SENSORS_DS1374
- tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
- depends on I2C && EXPERIMENTAL
+config DS1682
+ tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+ depends on EXPERIMENTAL
help
If you say yes here you get support for Dallas Semiconductor
- DS1374 real-time clock chips.
-
- This driver can also be built as a module. If so, the module
- will be called ds1374.
-
-config SENSORS_EEPROM
- tristate "EEPROM reader"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get read-only access to the EEPROM data
- available on modern memory DIMMs and Sony Vaio laptops. Such
- EEPROMs could theoretically be available on other devices as well.
+ DS1682 Total Elapsed Time Recorder.
This driver can also be built as a module. If so, the module
- will be called eeprom.
+ will be called ds1682.
config SENSORS_PCF8574
- tristate "Philips PCF8574 and PCF8574A"
- depends on I2C && EXPERIMENTAL
+ tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
+ depends on EXPERIMENTAL && GPIO_PCF857X = "n"
default n
help
If you say yes here you get support for Philips PCF8574 and
- PCF8574A chips.
+ PCF8574A chips. These chips are 8-bit I/O expanders for the I2C bus.
This driver can also be built as a module. If so, the module
will be called pcf8574.
+ This driver is deprecated and will be dropped soon. Use
+ drivers/gpio/pcf857x.c instead.
+
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
config SENSORS_PCA9539
- tristate "Philips PCA9539 16-bit I/O port"
- depends on I2C && EXPERIMENTAL
+ tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)"
+ depends on EXPERIMENTAL && GPIO_PCA953X = "n"
help
If you say yes here you get support for the Philips PCA9539
16-bit I/O port.
This driver can also be built as a module. If so, the module
will be called pca9539.
-config SENSORS_PCF8591
- tristate "Philips PCF8591"
- depends on I2C && EXPERIMENTAL
- default n
- help
- If you say yes here you get support for Philips PCF8591 chips.
-
- This driver can also be built as a module. If so, the module
- will be called pcf8591.
+ This driver is deprecated and will be dropped soon. Use
+ drivers/gpio/pca953x.c instead.
- These devices are hard to detect and rarely found on mainstream
- hardware. If unsure, say N.
-
-config ISP1301_OMAP
- tristate "Philips ISP1301 with OMAP OTG"
- depends on I2C && ARCH_OMAP_OTG
- help
- If you say yes here you get support for the Philips ISP1301
- USB-On-The-Go transceiver working with the OMAP OTG controller.
- The ISP1301 is used in products including H2 and H3 development
- boards for Texas Instruments OMAP processors.
-
- This driver can also be built as a module. If so, the module
- will be called isp1301_omap.
-
-# NOTE: This isn't really OMAP-specific, except for the current
-# interface location in <include/asm-arm/arch-omap/tps65010.h>
-# and having mostly OMAP-specific board support
-config TPS65010
- tristate "TPS6501x Power Management chips"
- depends on I2C && ARCH_OMAP
- default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
+config SENSORS_TSL2550
+ tristate "Taos TSL2550 ambient light sensor"
+ depends on EXPERIMENTAL
help
- If you say yes here you get support for the TPS6501x series of
- Power Management chips. These include voltage regulators,
- lithium ion/polymer battery charging, and other features that
- are often used in portable devices like cell phones and cameras.
-
- This driver can also be built as a module. If so, the module
- will be called tps65010.
-
-config SENSORS_M41T00
- tristate "ST M41T00 RTC chip"
- depends on I2C && PPC32
- help
- If you say yes here you get support for the ST M41T00 RTC chip.
-
- This driver can also be built as a module. If so, the module
- will be called m41t00.
-
-config SENSORS_MAX6875
- tristate "Maxim MAX6875 Power supply supervisor"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes here you get support for the Maxim MAX6875
- EEPROM-programmable, quad power-supply sequencer/supervisor.
-
- This provides an interface to program the EEPROM and reset the chip.
-
- This driver also supports the Maxim MAX6874 hex power-supply
- sequencer/supervisor if found at a compatible address.
+ If you say yes here you get support for the Taos TSL2550
+ ambient light sensor.
This driver can also be built as a module. If so, the module
- will be called max6875.
+ will be called tsl2550.
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff