lis3: add skeletons for interrupt handlers

[safe/jmp/linux-2.6] / drivers / hwmon / lis3lv02d.c

diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 50f3123..3c06350 100644 (file)
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -251,6 +251,9 @@ EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
 
 static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
 {
+       if (!test_bit(0, &lis3_dev.misc_opened))
+               goto out;
+
        /*
         * Be careful: on some HP laptops the bios force DD when on battery and
         * the lid is closed. This leads to interrupts as soon as a little move
@@ -260,44 +263,35 @@ static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
 
        wake_up_interruptible(&lis3_dev.misc_wait);
        kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
+out:
+       if (lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
+           lis3_dev.idev->input->users)
+               return IRQ_WAKE_THREAD;
        return IRQ_HANDLED;
 }
 
-static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+static irqreturn_t lis302dl_interrupt_thread1_8b(int irq, void *data)
 {
-       int ret;
+       return IRQ_HANDLED;
+}
 
+static irqreturn_t lis302dl_interrupt_thread2_8b(int irq, void *data)
+{
+       return IRQ_HANDLED;
+}
+
+static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
+{
        if (test_and_set_bit(0, &lis3_dev.misc_opened))
                return -EBUSY; /* already open */
 
        atomic_set(&lis3_dev.count, 0);
-
-       /*
-        * The sensor can generate interrupts for free-fall and direction
-        * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
-        * the things simple and _fast_ we activate it only for free-fall, so
-        * no need to read register (very slow with ACPI). For the same reason,
-        * we forbid shared interrupts.
-        *
-        * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
-        * io-apic is not configurable (and generates a warning) but I keep it
-        * in case of support for other hardware.
-        */
-       ret = request_irq(lis3_dev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING,
-                         DRIVER_NAME, &lis3_dev);
-
-       if (ret) {
-               clear_bit(0, &lis3_dev.misc_opened);
-               printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", lis3_dev.irq);
-               return -EBUSY;
-       }
        return 0;
 }
 
 static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
 {
        fasync_helper(-1, file, 0, &lis3_dev.async_queue);
-       free_irq(lis3_dev.irq, &lis3_dev);
        clear_bit(0, &lis3_dev.misc_opened); /* release the device */
        return 0;
 }
@@ -434,6 +428,11 @@ EXPORT_SYMBOL_GPL(lis3lv02d_joystick_enable);
 
 void lis3lv02d_joystick_disable(void)
 {
+       if (lis3_dev.irq)
+               free_irq(lis3_dev.irq, &lis3_dev);
+       if (lis3_dev.pdata && lis3_dev.pdata->irq2)
+               free_irq(lis3_dev.pdata->irq2, &lis3_dev);
+
        if (!lis3_dev.idev)
                return;
 
@@ -524,6 +523,7 @@ EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
 static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
                                struct lis3lv02d_platform_data *p)
 {
+       int err;
        int ctrl2 = p->hipass_ctrl;
 
        if (p->click_flags) {
@@ -554,6 +554,18 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
        }
        /* Configure hipass filters */
        dev->write(dev, CTRL_REG2, ctrl2);
+
+       if (p->irq2) {
+               err = request_threaded_irq(p->irq2,
+                                       NULL,
+                                       lis302dl_interrupt_thread2_8b,
+                                       IRQF_TRIGGER_RISING |
+                                       IRQF_ONESHOT,
+                                       DRIVER_NAME, &lis3_dev);
+               if (err < 0)
+                       printk(KERN_ERR DRIVER_NAME
+                               "No second IRQ. Limited functionality\n");
+       }
 }
 
 /*
@@ -562,6 +574,9 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *dev,
  */
 int lis3lv02d_init_device(struct lis3lv02d *dev)
 {
+       int err;
+       irq_handler_t thread_fn;
+
        dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
 
        switch (dev->whoami) {
@@ -616,6 +631,32 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
                goto out;
        }
 
+       /*
+        * The sensor can generate interrupts for free-fall and direction
+        * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep
+        * the things simple and _fast_ we activate it only for free-fall, so
+        * no need to read register (very slow with ACPI). For the same reason,
+        * we forbid shared interrupts.
+        *
+        * IRQF_TRIGGER_RISING seems pointless on HP laptops because the
+        * io-apic is not configurable (and generates a warning) but I keep it
+        * in case of support for other hardware.
+        */
+       if (dev->whoami == WAI_8B)
+               thread_fn = lis302dl_interrupt_thread1_8b;
+       else
+               thread_fn = NULL;
+
+       err = request_threaded_irq(dev->irq, lis302dl_interrupt,
+                               thread_fn,
+                               IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+                               DRIVER_NAME, &lis3_dev);
+
+       if (err < 0) {
+               printk(KERN_ERR DRIVER_NAME "Cannot get IRQ\n");
+               goto out;
+       }
+
        if (misc_register(&lis3lv02d_misc_device))
                printk(KERN_ERR DRIVER_NAME ": misc_register failed\n");
 out: