it87.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring.
+ The IT8705F is an LPC-based Super I/O part that contains UARTs, a
+ parallel port, an IR port, a MIDI port, a floppy controller, etc., in
+ addition to an Environment Controller (Enhanced Hardware Monitor and
+ Fan Controller)
+
+ This driver supports only the Environment Controller in the IT8705F and
+ similar parts. The other devices are supported by different drivers.
+
Supports: IT8705F Super I/O chip w/LPC interface
- IT8712F Super I/O chip w/LPC interface & SMBus
+ IT8712F Super I/O chip w/LPC interface
IT8716F Super I/O chip w/LPC interface
IT8718F Super I/O chip w/LPC interface
+ IT8720F Super I/O chip w/LPC interface
+ IT8726F Super I/O chip w/LPC interface
Sis950 A clone of the IT8705F
- Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com>
- Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2001 Chris Gauthron
+ Copyright (C) 2005-2007 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
+#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
#include <asm/io.h>
+#define DRVNAME "it87"
+
+enum chips { it87, it8712, it8716, it8718, it8720 };
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
-static unsigned short isa_address;
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718);
+static struct platform_device *pdev;
#define REG 0x2e /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
#define VAL 0x2f /* The value to read/write */
#define PME 0x04 /* The device with the fan registers in it */
-#define GPIO 0x07 /* The device with the IT8718F VID value in it */
+
+/* The device with the IT8718F/IT8720F VID value in it */
+#define GPIO 0x07
+
#define DEVID 0x20 /* Register: Device ID */
#define DEVREV 0x22 /* Register: Device Revision */
#define IT8705F_DEVID 0x8705
#define IT8716F_DEVID 0x8716
#define IT8718F_DEVID 0x8718
+#define IT8720F_DEVID 0x8720
+#define IT8726F_DEVID 0x8726
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
/* Not all BIOSes properly configure the PWM registers */
static int fix_pwm_polarity;
-/* Values read from Super-I/O config space */
-static u16 chip_type;
-static u8 vid_value;
-
/* Many IT87 constants specified below */
/* Length of ISA address segment */
#define IT87_EXTENT 8
-/* Where are the ISA address/data registers relative to the base address */
-#define IT87_ADDR_REG_OFFSET 5
-#define IT87_DATA_REG_OFFSET 6
+/* Length of ISA address segment for Environmental Controller */
+#define IT87_EC_EXTENT 2
+
+/* Offset of EC registers from ISA base address */
+#define IT87_EC_OFFSET 5
+
+/* Where are the ISA address/data registers relative to the EC base address */
+#define IT87_ADDR_REG_OFFSET 0
+#define IT87_DATA_REG_OFFSET 1
/*----- The IT87 registers -----*/
#define IT87_REG_ALARM2 0x02
#define IT87_REG_ALARM3 0x03
-/* The IT8718F has the VID value in a different register, in Super-I/O
- configuration space. */
+/* The IT8718F and IT8720F have the VID value in a different register, in
+ Super-I/O configuration space. */
#define IT87_REG_VID 0x0a
-/* Warning: register 0x0b is used for something completely different in
- new chips/revisions. I suspect only 16-bit tachometer mode will work
- for these. */
+/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b
+ for fan divisors. Later IT8712F revisions must use 16-bit tachometer
+ mode. */
#define IT87_REG_FAN_DIV 0x0b
#define IT87_REG_FAN_16BIT 0x0c
/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
-#define IT87_REG_FAN(nr) (0x0d + (nr))
-#define IT87_REG_FAN_MIN(nr) (0x10 + (nr))
-#define IT87_REG_FANX(nr) (0x18 + (nr))
-#define IT87_REG_FANX_MIN(nr) (0x1b + (nr))
+static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
+static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
+static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
+static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2)
-#define IT87_REG_I2C_ADDR 0x48
-
#define IT87_REG_VIN_ENABLE 0x50
#define IT87_REG_TEMP_ENABLE 0x51
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\
((val)+500)/1000),-128,127))
-#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000)
+#define TEMP_FROM_REG(val) ((val) * 1000)
#define PWM_TO_REG(val) ((val) >> 1)
#define PWM_FROM_REG(val) (((val)&0x7f) << 1)
}
#define DIV_FROM_REG(val) (1 << (val))
+static const unsigned int pwm_freq[8] = {
+ 48000000 / 128,
+ 24000000 / 128,
+ 12000000 / 128,
+ 8000000 / 128,
+ 6000000 / 128,
+ 3000000 / 128,
+ 1500000 / 128,
+ 750000 / 128,
+};
+
+
+struct it87_sio_data {
+ enum chips type;
+ /* Values read from Super-I/O config space */
+ u8 revision;
+ u8 vid_value;
+ /* Values set based on DMI strings */
+ u8 skip_pwm;
+};
-/* For each registered IT87, we need to keep some data in memory. That
- data is pointed to by it87_list[NR]->data. The structure itself is
- dynamically allocated, at the same time when a new it87 client is
- allocated. */
+/* For each registered chip, we need to keep some data in memory.
+ The structure is dynamically allocated. */
struct it87_data {
- struct i2c_client client;
- struct class_device *class_dev;
- struct mutex lock;
+ struct device *hwmon_dev;
enum chips type;
+ u8 revision;
+ unsigned short addr;
+ const char *name;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 in_max[8]; /* Register value */
u8 in_min[8]; /* Register value */
u8 has_fan; /* Bitfield, fans enabled */
- u16 fan[3]; /* Register values, possibly combined */
- u16 fan_min[3]; /* Register values, possibly combined */
- u8 temp[3]; /* Register value */
- u8 temp_high[3]; /* Register value */
- u8 temp_low[3]; /* Register value */
+ u16 fan[5]; /* Register values, possibly combined */
+ u16 fan_min[5]; /* Register values, possibly combined */
+ s8 temp[3]; /* Register value */
+ s8 temp_high[3]; /* Register value */
+ s8 temp_low[3]; /* Register value */
u8 sensor; /* Register value */
u8 fan_div[3]; /* Register encoding, shifted right */
u8 vid; /* Register encoding, combined */
u8 vrm;
u32 alarms; /* Register encoding, combined */
u8 fan_main_ctrl; /* Register value */
+ u8 fan_ctl; /* Register value */
u8 manual_pwm_ctl[3]; /* manual PWM value set by user */
};
+static inline int has_16bit_fans(const struct it87_data *data)
+{
+ /* IT8705F Datasheet 0.4.1, 3h == Version G.
+ IT8712F Datasheet 0.9.1, section 8.3.5 indicates 8h == Version J.
+ These are the first revisions with 16bit tachometer support. */
+ return (data->type == it87 && data->revision >= 0x03)
+ || (data->type == it8712 && data->revision >= 0x08)
+ || data->type == it8716
+ || data->type == it8718
+ || data->type == it8720;
+}
-static int it87_attach_adapter(struct i2c_adapter *adapter);
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
-static int it87_detach_client(struct i2c_client *client);
+static int it87_probe(struct platform_device *pdev);
+static int __devexit it87_remove(struct platform_device *pdev);
-static int it87_read_value(struct i2c_client *client, u8 reg);
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static int it87_read_value(struct it87_data *data, u8 reg);
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value);
static struct it87_data *it87_update_device(struct device *dev);
-static int it87_check_pwm(struct i2c_client *client);
-static void it87_init_client(struct i2c_client *client, struct it87_data *data);
+static int it87_check_pwm(struct device *dev);
+static void it87_init_device(struct platform_device *pdev);
-static struct i2c_driver it87_driver = {
- .driver = {
- .name = "it87",
- },
- .id = I2C_DRIVERID_IT87,
- .attach_adapter = it87_attach_adapter,
- .detach_client = it87_detach_client,
-};
-
-static struct i2c_driver it87_isa_driver = {
+static struct platform_driver it87_driver = {
.driver = {
.owner = THIS_MODULE,
- .name = "it87-isa",
+ .name = DRVNAME,
},
- .attach_adapter = it87_isa_attach_adapter,
- .detach_client = it87_detach_client,
+ .probe = it87_probe,
+ .remove = __devexit_p(it87_remove),
};
-
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_min[nr] = IN_TO_REG(val);
- it87_write_value(client, IT87_REG_VIN_MIN(nr),
+ it87_write_value(data, IT87_REG_VIN_MIN(nr),
data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->in_max[nr] = IN_TO_REG(val);
- it87_write_value(client, IT87_REG_VIN_MAX(nr),
+ it87_write_value(data, IT87_REG_VIN_MAX(nr),
data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_high[nr] = TEMP_TO_REG(val);
- it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
+ it87_write_value(data, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]);
mutex_unlock(&data->update_lock);
return count;
}
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->temp_low[nr] = TEMP_TO_REG(val);
- it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
+ it87_write_value(data, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]);
mutex_unlock(&data->update_lock);
return count;
}
if (reg & (1 << nr))
return sprintf(buf, "3\n"); /* thermal diode */
if (reg & (8 << nr))
- return sprintf(buf, "2\n"); /* thermistor */
+ return sprintf(buf, "4\n"); /* thermistor */
return sprintf(buf, "0\n"); /* disabled */
}
static ssize_t set_sensor(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->sensor &= ~(1 << nr);
data->sensor &= ~(8 << nr);
- /* 3 = thermal diode; 2 = thermistor; 0 = disabled */
+ if (val == 2) { /* backwards compatibility */
+ dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
+ "instead\n");
+ val = 4;
+ }
+ /* 3 = thermal diode; 4 = thermistor; 0 = disabled */
if (val == 3)
data->sensor |= 1 << nr;
- else if (val == 2)
+ else if (val == 4)
data->sensor |= 8 << nr;
else if (val != 0) {
mutex_unlock(&data->update_lock);
return -EINVAL;
}
- it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor);
+ it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
mutex_unlock(&data->update_lock);
return count;
}
struct it87_data *data = it87_update_device(dev);
return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]);
}
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct it87_data *data = it87_update_device(dev);
+ int index = (data->fan_ctl >> 4) & 0x07;
+
+ return sprintf(buf, "%u\n", pwm_freq[index]);
+}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
- u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
+ u8 reg;
mutex_lock(&data->update_lock);
+ reg = it87_read_value(data, IT87_REG_FAN_DIV);
switch (nr) {
case 0: data->fan_div[nr] = reg & 0x07; break;
case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
}
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
unsigned long val = simple_strtoul(buf, NULL, 10);
int min;
u8 old;
mutex_lock(&data->update_lock);
- old = it87_read_value(client, IT87_REG_FAN_DIV);
+ old = it87_read_value(data, IT87_REG_FAN_DIV);
/* Save fan min limit */
min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
val |= (data->fan_div[1] & 0x07) << 3;
if (data->fan_div[2] == 3)
val |= 0x1 << 6;
- it87_write_value(client, IT87_REG_FAN_DIV, val);
+ it87_write_value(data, IT87_REG_FAN_DIV, val);
/* Restore fan min limit */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
- it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]);
+ it87_write_value(data, IT87_REG_FAN_MIN[nr], data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
if (val == 0) {
int tmp;
/* make sure the fan is on when in on/off mode */
- tmp = it87_read_value(client, IT87_REG_FAN_CTL);
- it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr));
+ tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+ it87_write_value(data, IT87_REG_FAN_CTL, tmp | (1 << nr));
/* set on/off mode */
data->fan_main_ctrl &= ~(1 << nr);
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
} else if (val == 1) {
/* set SmartGuardian mode */
data->fan_main_ctrl |= (1 << nr);
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
/* set saved pwm value, clear FAN_CTLX PWM mode bit */
- it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
} else {
mutex_unlock(&data->update_lock);
return -EINVAL;
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
if (val < 0 || val > 255)
mutex_lock(&data->update_lock);
data->manual_pwm_ctl[nr] = val;
if (data->fan_main_ctrl & (1 << nr))
- it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ it87_write_value(data, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr]));
+ mutex_unlock(&data->update_lock);
+ return count;
+}
+static ssize_t set_pwm_freq(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int i;
+
+ /* Search for the nearest available frequency */
+ for (i = 0; i < 7; i++) {
+ if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
+ break;
+ }
+
+ mutex_lock(&data->update_lock);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL) & 0x8f;
+ data->fan_ctl |= i << 4;
+ it87_write_value(data, IT87_REG_FAN_CTL, data->fan_ctl);
mutex_unlock(&data->update_lock);
+
return count;
}
static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
show_pwm_enable, set_pwm_enable, offset - 1); \
static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
- show_pwm, set_pwm, offset - 1);
+ show_pwm, set_pwm, offset - 1); \
+static DEVICE_ATTR(pwm##offset##_freq, \
+ (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \
+ show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL));
show_pwm_offset(1);
show_pwm_offset(2);
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int val = simple_strtol(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN16_TO_REG(val);
- it87_write_value(client, IT87_REG_FAN_MIN(nr),
+ it87_write_value(data, IT87_REG_FAN_MIN[nr],
data->fan_min[nr] & 0xff);
- it87_write_value(client, IT87_REG_FANX_MIN(nr),
+ it87_write_value(data, IT87_REG_FANX_MIN[nr],
data->fan_min[nr] >> 8);
mutex_unlock(&data->update_lock);
return count;
show_fan16_offset(1);
show_fan16_offset(2);
show_fan16_offset(3);
+show_fan16_offset(4);
+show_fan16_offset(5);
/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int bitnr = to_sensor_dev_attr(attr)->index;
+ struct it87_data *data = it87_update_device(dev);
+ return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 10);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 12);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 13);
+static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 14);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
+
static ssize_t
show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct it87_data *data = it87_update_device(dev);
+ struct it87_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", data->vrm);
}
static ssize_t
store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
u32 val;
val = simple_strtoul(buf, NULL, 10);
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+static ssize_t show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct it87_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
static struct attribute *it87_attributes[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in5_max.dev_attr.attr,
&sensor_dev_attr_in6_max.dev_attr.attr,
&sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp1_type.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
+ &sensor_dev_attr_temp1_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_alarm.dev_attr.attr,
&dev_attr_alarms.attr,
+ &dev_attr_name.attr,
NULL
};
&sensor_dev_attr_fan2_min16.dev_attr.attr,
&sensor_dev_attr_fan3_input16.dev_attr.attr,
&sensor_dev_attr_fan3_min16.dev_attr.attr,
+ &sensor_dev_attr_fan4_input16.dev_attr.attr,
+ &sensor_dev_attr_fan4_min16.dev_attr.attr,
+ &sensor_dev_attr_fan5_input16.dev_attr.attr,
+ &sensor_dev_attr_fan5_min16.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_div.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan5_alarm.dev_attr.attr,
+
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
+ &dev_attr_pwm1_freq.attr,
+ &dev_attr_pwm2_freq.attr,
+ &dev_attr_pwm3_freq.attr,
&dev_attr_vrm.attr,
&dev_attr_cpu0_vid.attr,
.attrs = it87_attributes_opt,
};
-/* This function is called when:
- * it87_driver is inserted (when this module is loaded), for each
- available adapter
- * when a new adapter is inserted (and it87_driver is still present) */
-static int it87_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, it87_detect);
-}
-
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
-{
- return it87_detect(adapter, isa_address, -1);
-}
-
/* SuperIO detection - will change isa_address if a chip is found */
-static int __init it87_find(unsigned short *address)
+static int __init it87_find(unsigned short *address,
+ struct it87_sio_data *sio_data)
{
int err = -ENODEV;
+ u16 chip_type;
+ const char *board_vendor, *board_name;
superio_enter();
- chip_type = superio_inw(DEVID);
- if (chip_type != IT8712F_DEVID
- && chip_type != IT8716F_DEVID
- && chip_type != IT8718F_DEVID
- && chip_type != IT8705F_DEVID)
- goto exit;
+ chip_type = force_id ? force_id : superio_inw(DEVID);
+
+ switch (chip_type) {
+ case IT8705F_DEVID:
+ sio_data->type = it87;
+ break;
+ case IT8712F_DEVID:
+ sio_data->type = it8712;
+ break;
+ case IT8716F_DEVID:
+ case IT8726F_DEVID:
+ sio_data->type = it8716;
+ break;
+ case IT8718F_DEVID:
+ sio_data->type = it8718;
+ break;
+ case IT8720F_DEVID:
+ sio_data->type = it8720;
+ break;
+ case 0xffff: /* No device at all */
+ goto exit;
+ default:
+ pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
+ chip_type);
+ goto exit;
+ }
superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
}
err = 0;
+ sio_data->revision = superio_inb(DEVREV) & 0x0f;
pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
- chip_type, *address, superio_inb(DEVREV) & 0x0f);
+ chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
if (chip_type != IT8705F_DEVID) {
int reg;
superio_select(GPIO);
- if (chip_type == it8718)
- vid_value = superio_inb(IT87_SIO_VID_REG);
+ if ((chip_type == it8718) ||
+ (chip_type == it8720))
+ sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
if (reg & (1 << 0))
pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
}
+ /* Disable specific features based on DMI strings */
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_vendor && board_name) {
+ if (strcmp(board_vendor, "nVIDIA") == 0
+ && strcmp(board_name, "FN68PT") == 0) {
+ /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+ connected to a fan, but to something else. One user
+ has reported instant system power-off when changing
+ the PWM2 duty cycle, so we disable it.
+ I use the board name string as the trigger in case
+ the same board is ever used in other systems. */
+ pr_info("it87: Disabling pwm2 due to "
+ "hardware constraints\n");
+ sio_data->skip_pwm = (1 << 1);
+ }
+ }
+
exit:
superio_exit();
return err;
}
-/* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int __devinit it87_probe(struct platform_device *pdev)
{
- int i;
- struct i2c_client *new_client;
struct it87_data *data;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ struct it87_sio_data *sio_data = dev->platform_data;
int err = 0;
- const char *name = "";
- int is_isa = i2c_is_isa_adapter(adapter);
int enable_pwm_interface;
-
- if (!is_isa &&
- !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ static const char *names[] = {
+ "it87",
+ "it8712",
+ "it8716",
+ "it8718",
+ "it8720",
+ };
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (!request_region(res->start, IT87_EC_EXTENT, DRVNAME)) {
+ dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
+ (unsigned long)res->start,
+ (unsigned long)(res->start + IT87_EC_EXTENT - 1));
+ err = -EBUSY;
goto ERROR0;
-
- /* Reserve the ISA region */
- if (is_isa)
- if (!request_region(address, IT87_EXTENT,
- it87_isa_driver.driver.name))
- goto ERROR0;
-
- /* For now, we presume we have a valid client. We create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access it87_{read,write}_value. */
+ }
if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR1;
}
- new_client = &data->client;
- if (is_isa)
- mutex_init(&data->lock);
- i2c_set_clientdata(new_client, data);
- new_client->addr = address;
- new_client->adapter = adapter;
- new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
- new_client->flags = 0;
+ data->addr = res->start;
+ data->type = sio_data->type;
+ data->revision = sio_data->revision;
+ data->name = names[sio_data->type];
/* Now, we do the remaining detection. */
-
- if (kind < 0) {
- if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
- || (!is_isa
- && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
- err = -ENODEV;
- goto ERROR2;
- }
- }
-
- /* Determine the chip type. */
- if (kind <= 0) {
- i = it87_read_value(new_client, IT87_REG_CHIPID);
- if (i == 0x90) {
- kind = it87;
- if (is_isa) {
- switch (chip_type) {
- case IT8712F_DEVID:
- kind = it8712;
- break;
- case IT8716F_DEVID:
- kind = it8716;
- break;
- case IT8718F_DEVID:
- kind = it8718;
- break;
- }
- }
- }
- else {
- if (kind == 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- err = -ENODEV;
- goto ERROR2;
- }
+ if ((it87_read_value(data, IT87_REG_CONFIG) & 0x80)
+ || it87_read_value(data, IT87_REG_CHIPID) != 0x90) {
+ err = -ENODEV;
+ goto ERROR2;
}
- if (kind == it87) {
- name = "it87";
- } else if (kind == it8712) {
- name = "it8712";
- } else if (kind == it8716) {
- name = "it8716";
- } else if (kind == it8718) {
- name = "it8718";
- }
+ platform_set_drvdata(pdev, data);
- /* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
- data->type = kind;
- data->valid = 0;
mutex_init(&data->update_lock);
- /* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(new_client)))
- goto ERROR2;
-
- if (!is_isa)
- dev_info(&new_client->dev, "The I2C interface to IT87xxF "
- "hardware monitoring chips is deprecated. Please "
- "report if you still rely on it.\n");
-
/* Check PWM configuration */
- enable_pwm_interface = it87_check_pwm(new_client);
+ enable_pwm_interface = it87_check_pwm(dev);
/* Initialize the IT87 chip */
- it87_init_client(new_client, data);
+ it87_init_device(pdev);
/* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group)))
- goto ERROR3;
+ if ((err = sysfs_create_group(&dev->kobj, &it87_group)))
+ goto ERROR2;
/* Do not create fan files for disabled fans */
- if (data->type == it8716 || data->type == it8718) {
+ if (has_16bit_fans(data)) {
/* 16-bit tachometers */
if (data->has_fan & (1 << 0)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan1_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_min16.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan2_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_min16.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan3_input16.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_min16.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_alarm.dev_attr)))
+ goto ERROR4;
+ }
+ if (data->has_fan & (1 << 3)) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan4_input16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan4_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan4_alarm.dev_attr)))
+ goto ERROR4;
+ }
+ if (data->has_fan & (1 << 4)) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_fan5_input16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan5_min16.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan5_alarm.dev_attr)))
goto ERROR4;
}
} else {
/* 8-bit tachometers with clock divider */
if (data->has_fan & (1 << 0)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan1_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan1_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan1_div.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan1_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 1)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan2_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan2_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan2_div.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan2_alarm.dev_attr)))
goto ERROR4;
}
if (data->has_fan & (1 << 2)) {
- if ((err = device_create_file(&new_client->dev,
+ if ((err = device_create_file(dev,
&sensor_dev_attr_fan3_input.dev_attr))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&sensor_dev_attr_fan3_min.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_fan3_div.dev_attr)))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_div.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_fan3_alarm.dev_attr)))
goto ERROR4;
}
}
if (enable_pwm_interface) {
- if ((err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm1_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm2_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm3_enable.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm1.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm2.dev_attr))
- || (err = device_create_file(&new_client->dev,
- &sensor_dev_attr_pwm3.dev_attr)))
- goto ERROR4;
+ if (!(sio_data->skip_pwm & (1 << 0))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm1_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 1))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm2_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 2))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm3_freq)))
+ goto ERROR4;
+ }
}
if (data->type == it8712 || data->type == it8716
- || data->type == it8718) {
+ || data->type == it8718 || data->type == it8720) {
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
- data->vid = vid_value;
- if ((err = device_create_file(&new_client->dev,
+ data->vid = sio_data->vid_value;
+ if ((err = device_create_file(dev,
&dev_attr_vrm))
- || (err = device_create_file(&new_client->dev,
+ || (err = device_create_file(dev,
&dev_attr_cpu0_vid)))
goto ERROR4;
}
- data->class_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->class_dev)) {
- err = PTR_ERR(data->class_dev);
+ data->hwmon_dev = hwmon_device_register(dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
goto ERROR4;
}
return 0;
ERROR4:
- sysfs_remove_group(&new_client->dev.kobj, &it87_group);
- sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt);
-ERROR3:
- i2c_detach_client(new_client);
+ sysfs_remove_group(&dev->kobj, &it87_group);
+ sysfs_remove_group(&dev->kobj, &it87_group_opt);
ERROR2:
+ platform_set_drvdata(pdev, NULL);
kfree(data);
ERROR1:
- if (is_isa)
- release_region(address, IT87_EXTENT);
+ release_region(res->start, IT87_EC_EXTENT);
ERROR0:
return err;
}
-static int it87_detach_client(struct i2c_client *client)
+static int __devexit it87_remove(struct platform_device *pdev)
{
- struct it87_data *data = i2c_get_clientdata(client);
- int err;
+ struct it87_data *data = platform_get_drvdata(pdev);
- hwmon_device_unregister(data->class_dev);
- sysfs_remove_group(&client->dev.kobj, &it87_group);
- sysfs_remove_group(&client->dev.kobj, &it87_group_opt);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &it87_group);
+ sysfs_remove_group(&pdev->dev.kobj, &it87_group_opt);
- if ((err = i2c_detach_client(client)))
- return err;
-
- if(i2c_is_isa_client(client))
- release_region(client->addr, IT87_EXTENT);
+ release_region(data->addr, IT87_EC_EXTENT);
+ platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
-/* The SMBus locks itself, but ISA access must be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* Must be called with data->update_lock held, except during initialization.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static int it87_read_value(struct i2c_client *client, u8 reg)
+static int it87_read_value(struct it87_data *data, u8 reg)
{
- struct it87_data *data = i2c_get_clientdata(client);
-
- int res;
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return res;
- } else
- return i2c_smbus_read_byte_data(client, reg);
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ return inb_p(data->addr + IT87_DATA_REG_OFFSET);
}
-/* The SMBus locks itself, but ISA access muse be locked explicitly!
- We don't want to lock the whole ISA bus, so we lock each client
- separately.
+/* Must be called with data->update_lock held, except during initialization.
We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
would slow down the IT87 access and should not be necessary. */
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct it87_data *data, u8 reg, u8 value)
{
- struct it87_data *data = i2c_get_clientdata(client);
-
- if (i2c_is_isa_client(client)) {
- mutex_lock(&data->lock);
- outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
- outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
- mutex_unlock(&data->lock);
- return 0;
- } else
- return i2c_smbus_write_byte_data(client, reg, value);
+ outb_p(reg, data->addr + IT87_ADDR_REG_OFFSET);
+ outb_p(value, data->addr + IT87_DATA_REG_OFFSET);
}
/* Return 1 if and only if the PWM interface is safe to use */
-static int it87_check_pwm(struct i2c_client *client)
+static int __devinit it87_check_pwm(struct device *dev)
{
+ struct it87_data *data = dev_get_drvdata(dev);
/* Some BIOSes fail to correctly configure the IT87 fans. All fans off
* and polarity set to active low is sign that this is the case so we
* disable pwm control to protect the user. */
- int tmp = it87_read_value(client, IT87_REG_FAN_CTL);
+ int tmp = it87_read_value(data, IT87_REG_FAN_CTL);
if ((tmp & 0x87) == 0) {
if (fix_pwm_polarity) {
/* The user asks us to attempt a chip reconfiguration.
u8 pwm[3];
for (i = 0; i < 3; i++)
- pwm[i] = it87_read_value(client,
+ pwm[i] = it87_read_value(data,
IT87_REG_PWM(i));
/* If any fan is in automatic pwm mode, the polarity
* better don't change anything (but still disable the
* PWM interface). */
if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) {
- dev_info(&client->dev, "Reconfiguring PWM to "
+ dev_info(dev, "Reconfiguring PWM to "
"active high polarity\n");
- it87_write_value(client, IT87_REG_FAN_CTL,
+ it87_write_value(data, IT87_REG_FAN_CTL,
tmp | 0x87);
for (i = 0; i < 3; i++)
- it87_write_value(client,
+ it87_write_value(data,
IT87_REG_PWM(i),
0x7f & ~pwm[i]);
return 1;
}
- dev_info(&client->dev, "PWM configuration is "
+ dev_info(dev, "PWM configuration is "
"too broken to be fixed\n");
}
- dev_info(&client->dev, "Detected broken BIOS "
+ dev_info(dev, "Detected broken BIOS "
"defaults, disabling PWM interface\n");
return 0;
} else if (fix_pwm_polarity) {
- dev_info(&client->dev, "PWM configuration looks "
+ dev_info(dev, "PWM configuration looks "
"sane, won't touch\n");
}
}
/* Called when we have found a new IT87. */
-static void it87_init_client(struct i2c_client *client, struct it87_data *data)
+static void __devinit it87_init_device(struct platform_device *pdev)
{
+ struct it87_data *data = platform_get_drvdata(pdev);
int tmp, i;
/* initialize to sane defaults:
* means -1 degree C, which surprisingly doesn't trigger an alarm,
* but is still confusing, so change to 127 degrees C. */
for (i = 0; i < 8; i++) {
- tmp = it87_read_value(client, IT87_REG_VIN_MIN(i));
+ tmp = it87_read_value(data, IT87_REG_VIN_MIN(i));
if (tmp == 0xff)
- it87_write_value(client, IT87_REG_VIN_MIN(i), 0);
+ it87_write_value(data, IT87_REG_VIN_MIN(i), 0);
}
for (i = 0; i < 3; i++) {
- tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ tmp = it87_read_value(data, IT87_REG_TEMP_HIGH(i));
if (tmp == 0xff)
- it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127);
+ it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
- /* Check if temperature channnels are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE);
+ /* Check if temperature channels are reset manually or by some reason */
+ tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
if ((tmp & 0x3f) == 0) {
/* Temp1,Temp3=thermistor; Temp2=thermal diode */
tmp = (tmp & 0xc0) | 0x2a;
- it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp);
+ it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp);
}
data->sensor = tmp;
/* Check if voltage monitors are reset manually or by some reason */
- tmp = it87_read_value(client, IT87_REG_VIN_ENABLE);
+ tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
if ((tmp & 0xff) == 0) {
/* Enable all voltage monitors */
- it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff);
+ it87_write_value(data, IT87_REG_VIN_ENABLE, 0xff);
}
/* Check if tachometers are reset manually or by some reason */
- data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
+ data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
if ((data->fan_main_ctrl & 0x70) == 0) {
/* Enable all fan tachometers */
data->fan_main_ctrl |= 0x70;
- it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
+ it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
/* Set tachometers to 16-bit mode if needed */
- if (data->type == it8716 || data->type == it8718) {
- tmp = it87_read_value(client, IT87_REG_FAN_16BIT);
+ if (has_16bit_fans(data)) {
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
- dev_dbg(&client->dev,
+ dev_dbg(&pdev->dev,
"Setting fan1-3 to 16-bit mode\n");
- it87_write_value(client, IT87_REG_FAN_16BIT,
+ it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
+ /* IT8705F only supports three fans. */
+ if (data->type != it87) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ }
}
/* Set current fan mode registers and the default settings for the
for (i = 0; i < 3; i++) {
if (data->fan_main_ctrl & (1 << i)) {
/* pwm mode */
- tmp = it87_read_value(client, IT87_REG_PWM(i));
+ tmp = it87_read_value(data, IT87_REG_PWM(i));
if (tmp & 0x80) {
/* automatic pwm - not yet implemented, but
* leave the settings made by the BIOS alone
}
/* Start monitoring */
- it87_write_value(client, IT87_REG_CONFIG,
- (it87_read_value(client, IT87_REG_CONFIG) & 0x36)
+ it87_write_value(data, IT87_REG_CONFIG,
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
| (update_vbat ? 0x41 : 0x01));
}
static struct it87_data *it87_update_device(struct device *dev)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct it87_data *data = i2c_get_clientdata(client);
+ struct it87_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->update_lock);
if (update_vbat) {
/* Cleared after each update, so reenable. Value
returned by this read will be previous value */
- it87_write_value(client, IT87_REG_CONFIG,
- it87_read_value(client, IT87_REG_CONFIG) | 0x40);
+ it87_write_value(data, IT87_REG_CONFIG,
+ it87_read_value(data, IT87_REG_CONFIG) | 0x40);
}
for (i = 0; i <= 7; i++) {
data->in[i] =
- it87_read_value(client, IT87_REG_VIN(i));
+ it87_read_value(data, IT87_REG_VIN(i));
data->in_min[i] =
- it87_read_value(client, IT87_REG_VIN_MIN(i));
+ it87_read_value(data, IT87_REG_VIN_MIN(i));
data->in_max[i] =
- it87_read_value(client, IT87_REG_VIN_MAX(i));
+ it87_read_value(data, IT87_REG_VIN_MAX(i));
}
/* in8 (battery) has no limit registers */
data->in[8] =
- it87_read_value(client, IT87_REG_VIN(8));
+ it87_read_value(data, IT87_REG_VIN(8));
- for (i = 0; i < 3; i++) {
+ for (i = 0; i < 5; i++) {
/* Skip disabled fans */
if (!(data->has_fan & (1 << i)))
continue;
data->fan_min[i] =
- it87_read_value(client, IT87_REG_FAN_MIN(i));
- data->fan[i] = it87_read_value(client,
- IT87_REG_FAN(i));
+ it87_read_value(data, IT87_REG_FAN_MIN[i]);
+ data->fan[i] = it87_read_value(data,
+ IT87_REG_FAN[i]);
/* Add high byte if in 16-bit mode */
- if (data->type == it8716 || data->type == it8718) {
- data->fan[i] |= it87_read_value(client,
- IT87_REG_FANX(i)) << 8;
- data->fan_min[i] |= it87_read_value(client,
- IT87_REG_FANX_MIN(i)) << 8;
+ if (has_16bit_fans(data)) {
+ data->fan[i] |= it87_read_value(data,
+ IT87_REG_FANX[i]) << 8;
+ data->fan_min[i] |= it87_read_value(data,
+ IT87_REG_FANX_MIN[i]) << 8;
}
}
for (i = 0; i < 3; i++) {
data->temp[i] =
- it87_read_value(client, IT87_REG_TEMP(i));
+ it87_read_value(data, IT87_REG_TEMP(i));
data->temp_high[i] =
- it87_read_value(client, IT87_REG_TEMP_HIGH(i));
+ it87_read_value(data, IT87_REG_TEMP_HIGH(i));
data->temp_low[i] =
- it87_read_value(client, IT87_REG_TEMP_LOW(i));
+ it87_read_value(data, IT87_REG_TEMP_LOW(i));
}
/* Newer chips don't have clock dividers */
- if ((data->has_fan & 0x07) && data->type != it8716
- && data->type != it8718) {
- i = it87_read_value(client, IT87_REG_FAN_DIV);
+ if ((data->has_fan & 0x07) && !has_16bit_fans(data)) {
+ i = it87_read_value(data, IT87_REG_FAN_DIV);
data->fan_div[0] = i & 0x07;
data->fan_div[1] = (i >> 3) & 0x07;
data->fan_div[2] = (i & 0x40) ? 3 : 1;
}
data->alarms =
- it87_read_value(client, IT87_REG_ALARM1) |
- (it87_read_value(client, IT87_REG_ALARM2) << 8) |
- (it87_read_value(client, IT87_REG_ALARM3) << 16);
- data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL);
-
- data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE);
- /* The 8705 does not have VID capability */
+ it87_read_value(data, IT87_REG_ALARM1) |
+ (it87_read_value(data, IT87_REG_ALARM2) << 8) |
+ (it87_read_value(data, IT87_REG_ALARM3) << 16);
+ data->fan_main_ctrl = it87_read_value(data,
+ IT87_REG_FAN_MAIN_CTRL);
+ data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL);
+
+ data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+ /* The 8705 does not have VID capability.
+ The 8718 and the 8720 don't use IT87_REG_VID for the
+ same purpose. */
if (data->type == it8712 || data->type == it8716) {
- data->vid = it87_read_value(client, IT87_REG_VID);
+ data->vid = it87_read_value(data, IT87_REG_VID);
/* The older IT8712F revisions had only 5 VID pins,
but we assume it is always safe to read 6 bits. */
data->vid &= 0x3f;
return data;
}
+static int __init it87_device_add(unsigned short address,
+ const struct it87_sio_data *sio_data)
+{
+ struct resource res = {
+ .start = address + IT87_EC_OFFSET,
+ .end = address + IT87_EC_OFFSET + IT87_EC_EXTENT - 1,
+ .name = DRVNAME,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit;
+
+ pdev = platform_device_alloc(DRVNAME, address);
+ if (!pdev) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ goto exit;
+ }
+
+ err = platform_device_add_resources(pdev, &res, 1);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device resource addition failed "
+ "(%d)\n", err);
+ goto exit_device_put;
+ }
+
+ err = platform_device_add_data(pdev, sio_data,
+ sizeof(struct it87_sio_data));
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(pdev);
+ if (err) {
+ printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+ err);
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(pdev);
+exit:
+ return err;
+}
+
static int __init sm_it87_init(void)
{
- int res;
+ int err;
+ unsigned short isa_address=0;
+ struct it87_sio_data sio_data;
- res = i2c_add_driver(&it87_driver);
- if (res)
- return res;
+ memset(&sio_data, 0, sizeof(struct it87_sio_data));
+ err = it87_find(&isa_address, &sio_data);
+ if (err)
+ return err;
+ err = platform_driver_register(&it87_driver);
+ if (err)
+ return err;
- if (!it87_find(&isa_address)) {
- res = i2c_isa_add_driver(&it87_isa_driver);
- if (res) {
- i2c_del_driver(&it87_driver);
- return res;
- }
+ err = it87_device_add(isa_address, &sio_data);
+ if (err){
+ platform_driver_unregister(&it87_driver);
+ return err;
}
return 0;
static void __exit sm_it87_exit(void)
{
- if (isa_address)
- i2c_isa_del_driver(&it87_isa_driver);
- i2c_del_driver(&it87_driver);
+ platform_device_unregister(pdev);
+ platform_driver_unregister(&it87_driver);
}
-MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>, "
+MODULE_AUTHOR("Chris Gauthron, "
"Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F, SiS950 driver");
+MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F/8720F/8726F, SiS950 driver");
module_param(update_vbat, bool, 0);
MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value");
module_param(fix_pwm_polarity, bool, 0);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff