will be called adt7470.
config SENSORS_ADT7473
- tristate "Analog Devices ADT7473"
+ tristate "Analog Devices ADT7473 (DEPRECATED)"
depends on I2C && EXPERIMENTAL
+ select SENSORS_ADT7475
help
If you say yes here you get support for the Analog Devices
ADT7473 temperature monitoring chips.
+ This driver is deprecated, you should use the adt7475 driver
+ instead.
+
This driver can also be built as a module. If so, the module
will be called adt7473.
config SENSORS_ADT7475
- tristate "Analog Devices ADT7475"
+ tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for the Analog Devices
- ADT7475 hardware monitoring chips.
+ ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+ chips.
This driver can also be build as a module. If so, the module
will be called adt7475.
This driver can also be built as a module. If so, the module
will be called k8temp.
+config SENSORS_K10TEMP
+ tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+ depends on X86 && PCI
+ help
+ If you say yes here you get support for the temperature
+ sensor(s) inside your CPU. Supported are later revisions of
+ the AMD Family 10h and all revisions of the AMD Family 11h
+ microarchitectures.
+
+ This driver can also be built as a module. If so, the module
+ will be called k10temp.
+
config SENSORS_AMS
tristate "Apple Motion Sensor driver"
depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
+ tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
- and F8000 Super-I/O chips.
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+ F71889FG and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71882fg.
This driver can also be built as a module. If so, the module
will be called f75375s.
-config SENSORS_FSCHER
- tristate "FSC Hermes (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
depends on X86 && I2C
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core (2) Duo/Solo temperature sensor"
- depends on X86 && EXPERIMENTAL
+ tristate "Intel Core/Core2/Atom temperature sensor"
+ depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Supported all are all known variants
- of Intel Core family.
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check documentation/driver for details.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
This driver can also be built as a module. If so, the module
will be called lm70.
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
+
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
config SENSORS_S3C
tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
If you say yes here you get support for the on-board ADCs of
the Samsung S3C24XX or S3C64XX series of SoC
This driver can also be built as a module. If so, the module
will be called ads7828.
+config SENSORS_AMC6821
+ tristate "Texas Instruments AMC6821"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for the Texas Instruments
+ AMC6821 hardware monitoring chips.
+
+ This driver can also be build as a module. If so, the module
+ will be called amc6821.
+
config SENSORS_THMC50
tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
depends on I2C && EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called tmp421.
+config SENSORS_VIA_CPUTEMP
+ tristate "VIA CPU temperature sensor"
+ depends on X86
+ help
+ If you say yes here you get support for the temperature
+ sensor inside your CPU. Supported are all known variants of
+ the VIA C7 and Nano.
+
config SENSORS_VIA686A
tristate "VIA686A"
depends on PCI
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
+config SENSORS_WM8350
+ tristate "Wolfson Microelectronics WM835x"
+ depends on MFD_WM8350
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the WM835x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm8350-hwmon.
+
config SENSORS_ULTRA45
tristate "Sun Ultra45 PIC16F747"
depends on SPARC64
will be called lis3lv02d and a specific module for the SPI transport
is called lis3lv02d_spi.
+config SENSORS_LIS3_I2C
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
+ depends on I2C && INPUT
+ select INPUT_POLLDEV
+ default n
+ help
+ This driver provides support for the LIS3LV02Dx accelerometer connected
+ via I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the device to act as a pinball machine-esque joystick.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for the I2C transport
+ is called lis3lv02d_i2c.
+
config SENSORS_APPLESMC
tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
depends on INPUT && X86
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783 ADC"
+ depends on MFD_MC13783
+ help
+ Support for the A/D converter on MC13783 PMIC.
+
if ACPI
comment "ACPI drivers"
will be called asus_atk0110.
config SENSORS_LIS3LV02D
- tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
depends on INPUT
select INPUT_POLLDEV
select NEW_LEDS
select LEDS_CLASS
default n
help
- This driver provides support for the LIS3LV02Dx accelerometer. In
- particular, it can be found in a number of HP laptops, which have the
- "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
- systems the driver should load automatically (via ACPI). The
- accelerometer might also be found in other systems, connected via SPI
- or I2C. The accelerometer data is readable via
- /sys/devices/platform/lis3lv02d.
+ This driver provides support for the LIS3* accelerometers, such as the
+ LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
+ of HP laptops, which have the "Mobile Data Protection System 3D" or
+ "3D DriveGuard" feature. On such systems the driver should load
+ automatically (via ACPI alias). The accelerometer might also be found
+ in other systems, connected via SPI or I2C. The accelerometer data is
+ readable via /sys/devices/platform/lis3lv02d.
This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ a laptop to act as a pinball machine-esque joystick. It provides also
+ a misc device which can be used to detect free-fall. On HP laptops,
if the led infrastructure is activated, support for a led indicating
- disk protection will be provided as hp:red:hddprotection.
+ disk protection will be provided as hp::hddprotect. For more
+ information on the feature, refer to Documentation/hwmon/lis3lv02d.
This driver can also be built as modules. If so, the core module
will be called lis3lv02d and a specific module for HP laptops will be