#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+#include <linux/power_supply.h>
+#endif
#include "hid-ids.h"
struct wacom_data {
__u16 tool;
unsigned char butstate;
+ unsigned char high_speed;
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ int battery_capacity;
+ struct power_supply battery;
+ struct power_supply ac;
+#endif
};
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+/*percent of battery capacity, 0 means AC online*/
+static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
+
+static enum power_supply_property wacom_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY
+};
+
+static enum power_supply_property wacom_ac_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE
+};
+
+static int wacom_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wacom_data *wdata = container_of(psy,
+ struct wacom_data, battery);
+ int power_state = batcap[wdata->battery_capacity];
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ /* show 100% battery capacity when charging */
+ if (power_state == 0)
+ val->intval = 100;
+ else
+ val->intval = power_state;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int wacom_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
+ int power_state = batcap[wdata->battery_capacity];
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* fall through */
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (power_state == 0)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+#endif
+
+static void wacom_poke(struct hid_device *hdev, u8 speed)
+{
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+ int limit, ret;
+ char rep_data[2];
+
+ rep_data[0] = 0x03 ; rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+
+ if (ret >= 0) {
+ if (speed == 0)
+ rep_data[0] = 0x05;
+ else
+ rep_data[0] = 0x06;
+
+ rep_data[1] = 0x00;
+ limit = 3;
+ do {
+ ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+ HID_FEATURE_REPORT);
+ } while (ret < 0 && limit-- > 0);
+
+ if (ret >= 0) {
+ wdata->high_speed = speed;
+ return;
+ }
+ }
+
+ /*
+ * Note that if the raw queries fail, it's not a hard failure and it
+ * is safe to continue
+ */
+ dev_warn(&hdev->dev, "failed to poke device, command %d, err %d\n",
+ rep_data[0], ret);
+ return;
+}
+
+static ssize_t wacom_show_speed(struct device *dev,
+ struct device_attribute
+ *attr, char *buf)
+{
+ struct wacom_data *wdata = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
+}
+
+static ssize_t wacom_store_speed(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ int new_speed;
+
+ if (sscanf(buf, "%1d", &new_speed ) != 1)
+ return -EINVAL;
+
+ if (new_speed == 0 || new_speed == 1) {
+ wacom_poke(hdev, new_speed);
+ return strnlen(buf, PAGE_SIZE);
+ } else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUGO,
+ wacom_show_speed, wacom_store_speed);
+
static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *raw_data, int size)
{
input_sync(input);
}
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ /* Store current battery capacity */
+ rw = (data[7] >> 2 & 0x07);
+ if (rw != wdata->battery_capacity)
+ wdata->battery_capacity = rw;
+#endif
return 1;
}
struct hid_input *hidinput;
struct input_dev *input;
struct wacom_data *wdata;
- char rep_data[2];
int ret;
- int limit;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (wdata == NULL) {
goto err_free;
}
- /*
- * Note that if the raw queries fail, it's not a hard failure and it
- * is safe to continue
- */
+ ret = device_create_file(&hdev->dev, &dev_attr_speed);
+ if (ret)
+ dev_warn(&hdev->dev,
+ "can't create sysfs speed attribute err: %d\n", ret);
- /* Set Wacom mode2 */
- rep_data[0] = 0x03; rep_data[1] = 0x00;
- limit = 3;
- do {
- ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
- HID_FEATURE_REPORT);
- } while (ret < 0 && limit-- > 0);
- if (ret < 0)
- dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+ /* Set Wacom mode 2 with high reporting speed */
+ wacom_poke(hdev, 1);
- /* 0x06 - high reporting speed, 0x05 - low speed */
- rep_data[0] = 0x06; rep_data[1] = 0x00;
- limit = 3;
- do {
- ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
- HID_FEATURE_REPORT);
- } while (ret < 0 && limit-- > 0);
- if (ret < 0)
- dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ wdata->battery.properties = wacom_battery_props;
+ wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
+ wdata->battery.get_property = wacom_battery_get_property;
+ wdata->battery.name = "wacom_battery";
+ wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ wdata->battery.use_for_apm = 0;
+ ret = power_supply_register(&hdev->dev, &wdata->battery);
+ if (ret) {
+ dev_warn(&hdev->dev,
+ "can't create sysfs battery attribute, err: %d\n", ret);
+ /*
+ * battery attribute is not critical for the tablet, but if it
+ * failed then there is no need to create ac attribute
+ */
+ goto move_on;
+ }
+
+ wdata->ac.properties = wacom_ac_props;
+ wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
+ wdata->ac.get_property = wacom_ac_get_property;
+ wdata->ac.name = "wacom_ac";
+ wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
+ wdata->ac.use_for_apm = 0;
+
+ ret = power_supply_register(&hdev->dev, &wdata->ac);
+ if (ret) {
+ dev_warn(&hdev->dev,
+ "can't create ac battery attribute, err: %d\n", ret);
+ /*
+ * ac attribute is not critical for the tablet, but if it
+ * failed then we don't want to battery attribute to exist
+ */
+ power_supply_unregister(&wdata->battery);
+ }
+
+move_on:
+#endif
hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
input = hidinput->input;
static void wacom_remove(struct hid_device *hdev)
{
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ struct wacom_data *wdata = hid_get_drvdata(hdev);
+#endif
hid_hw_stop(hdev);
+
+#ifdef CONFIG_HID_WACOM_POWER_SUPPLY
+ power_supply_unregister(&wdata->battery);
+ power_supply_unregister(&wdata->ac);
+#endif
kfree(hid_get_drvdata(hdev));
}
static const struct hid_device_id wacom_devices[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
-
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ }
};
MODULE_DEVICE_TABLE(hid, wacom_devices);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff