* Jesse Barnes <jesse.barnes@intel.com>
*/
+#include <acpi/button.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include <linux/acpi.h>
+
+/* Private structure for the integrated LVDS support */
+struct intel_lvds_priv {
+ int fitting_mode;
+ u32 pfit_control;
+ u32 pfit_pgm_ratios;
+};
/**
* Sets the backlight level.
static void intel_lvds_set_backlight(struct drm_device *dev, int level)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 blc_pwm_ctl;
+ u32 blc_pwm_ctl, reg;
+
+ if (IS_IRONLAKE(dev))
+ reg = BLC_PWM_CPU_CTL;
+ else
+ reg = BLC_PWM_CTL;
- blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
- I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
+ blc_pwm_ctl = I915_READ(reg) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+ I915_WRITE(reg, (blc_pwm_ctl |
(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
}
static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
- return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
+ if (IS_IRONLAKE(dev))
+ reg = BLC_PWM_PCH_CTL2;
+ else
+ reg = BLC_PWM_CTL;
+
+ return ((I915_READ(reg) & BACKLIGHT_MODULATION_FREQ_MASK) >>
BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
}
static void intel_lvds_set_power(struct drm_device *dev, bool on)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 pp_status;
+ u32 pp_status, ctl_reg, status_reg;
+
+ if (IS_IRONLAKE(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ status_reg = PCH_PP_STATUS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ status_reg = PP_STATUS;
+ }
if (on) {
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) |
POWER_TARGET_ON);
do {
- pp_status = I915_READ(PP_STATUS);
+ pp_status = I915_READ(status_reg);
} while ((pp_status & PP_ON) == 0);
intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
} else {
intel_lvds_set_backlight(dev, 0);
- I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) &
~POWER_TARGET_ON);
do {
- pp_status = I915_READ(PP_STATUS);
+ pp_status = I915_READ(status_reg);
} while (pp_status & PP_ON);
}
}
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+ u32 pwm_ctl_reg;
+
+ if (IS_IRONLAKE(dev)) {
+ pp_on_reg = PCH_PP_ON_DELAYS;
+ pp_off_reg = PCH_PP_OFF_DELAYS;
+ pp_ctl_reg = PCH_PP_CONTROL;
+ pp_div_reg = PCH_PP_DIVISOR;
+ pwm_ctl_reg = BLC_PWM_CPU_CTL;
+ } else {
+ pp_on_reg = PP_ON_DELAYS;
+ pp_off_reg = PP_OFF_DELAYS;
+ pp_ctl_reg = PP_CONTROL;
+ pp_div_reg = PP_DIVISOR;
+ pwm_ctl_reg = BLC_PWM_CTL;
+ }
- dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ dev_priv->savePP_ON = I915_READ(pp_on_reg);
+ dev_priv->savePP_OFF = I915_READ(pp_off_reg);
+ dev_priv->savePP_CONTROL = I915_READ(pp_ctl_reg);
+ dev_priv->savePP_DIVISOR = I915_READ(pp_div_reg);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(pwm_ctl_reg);
dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 pp_on_reg, pp_off_reg, pp_ctl_reg, pp_div_reg;
+ u32 pwm_ctl_reg;
+
+ if (IS_IRONLAKE(dev)) {
+ pp_on_reg = PCH_PP_ON_DELAYS;
+ pp_off_reg = PCH_PP_OFF_DELAYS;
+ pp_ctl_reg = PCH_PP_CONTROL;
+ pp_div_reg = PCH_PP_DIVISOR;
+ pwm_ctl_reg = BLC_PWM_CPU_CTL;
+ } else {
+ pp_on_reg = PP_ON_DELAYS;
+ pp_off_reg = PP_OFF_DELAYS;
+ pp_ctl_reg = PP_CONTROL;
+ pp_div_reg = PP_DIVISOR;
+ pwm_ctl_reg = BLC_PWM_CTL;
+ }
- I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
- I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
- I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
- I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
- I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ I915_WRITE(pwm_ctl_reg, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(pp_on_reg, dev_priv->savePP_ON);
+ I915_WRITE(pp_off_reg, dev_priv->savePP_OFF);
+ I915_WRITE(pp_div_reg, dev_priv->savePP_DIVISOR);
+ I915_WRITE(pp_ctl_reg, dev_priv->savePP_CONTROL);
if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
intel_lvds_set_power(dev, true);
else
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ /*
+ * float point operation is not supported . So the PANEL_RATIO_FACTOR
+ * is defined, which can avoid the float point computation when
+ * calculating the panel ratio.
+ */
+#define PANEL_RATIO_FACTOR 8192
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ u32 pfit_control = 0, pfit_pgm_ratios = 0;
+ int left_border = 0, right_border = 0, top_border = 0;
+ int bottom_border = 0;
+ bool border = 0;
+ int panel_ratio, desired_ratio, vert_scale, horiz_scale;
+ int horiz_ratio, vert_ratio;
+ u32 hsync_width, vsync_width;
+ u32 hblank_width, vblank_width;
+ u32 hsync_pos, vsync_pos;
/* Should never happen!! */
if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
- printk(KERN_ERR "Can't support LVDS on pipe A\n");
+ DRM_ERROR("Can't support LVDS on pipe A\n");
return false;
}
/* Should never happen!! */
list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
- printk(KERN_ERR "Can't enable LVDS and another "
+ DRM_ERROR("Can't enable LVDS and another "
"encoder on the same pipe\n");
return false;
}
}
-
+ /* If we don't have a panel mode, there is nothing we can do */
+ if (dev_priv->panel_fixed_mode == NULL)
+ return true;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
}
+ /* Make sure pre-965s set dither correctly */
+ if (!IS_I965G(dev)) {
+ if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+ }
+
+ /* Native modes don't need fitting */
+ if (adjusted_mode->hdisplay == mode->hdisplay &&
+ adjusted_mode->vdisplay == mode->vdisplay) {
+ pfit_pgm_ratios = 0;
+ border = 0;
+ goto out;
+ }
+
+ /* full screen scale for now */
+ if (IS_IRONLAKE(dev))
+ goto out;
+
+ /* 965+ wants fuzzy fitting */
+ if (IS_I965G(dev))
+ pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
+ PFIT_FILTER_FUZZY;
+
+ hsync_width = adjusted_mode->crtc_hsync_end -
+ adjusted_mode->crtc_hsync_start;
+ vsync_width = adjusted_mode->crtc_vsync_end -
+ adjusted_mode->crtc_vsync_start;
+ hblank_width = adjusted_mode->crtc_hblank_end -
+ adjusted_mode->crtc_hblank_start;
+ vblank_width = adjusted_mode->crtc_vblank_end -
+ adjusted_mode->crtc_vblank_start;
+ /*
+ * Deal with panel fitting options. Figure out how to stretch the
+ * image based on its aspect ratio & the current panel fitting mode.
+ */
+ panel_ratio = adjusted_mode->hdisplay * PANEL_RATIO_FACTOR /
+ adjusted_mode->vdisplay;
+ desired_ratio = mode->hdisplay * PANEL_RATIO_FACTOR /
+ mode->vdisplay;
+ /*
+ * Enable automatic panel scaling for non-native modes so that they fill
+ * the screen. Should be enabled before the pipe is enabled, according
+ * to register description and PRM.
+ * Change the value here to see the borders for debugging
+ */
+ if (!IS_IRONLAKE(dev)) {
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+ }
+
+ switch (lvds_priv->fitting_mode) {
+ case DRM_MODE_SCALE_CENTER:
+ /*
+ * For centered modes, we have to calculate border widths &
+ * heights and modify the values programmed into the CRTC.
+ */
+ left_border = (adjusted_mode->hdisplay - mode->hdisplay) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1)
+ right_border++;
+ top_border = (adjusted_mode->vdisplay - mode->vdisplay) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ /* Set active & border values */
+ adjusted_mode->crtc_hdisplay = mode->hdisplay;
+ /* Keep the boder be even */
+ if (right_border & 1)
+ right_border++;
+ /* use the border directly instead of border minuse one */
+ adjusted_mode->crtc_hblank_start = mode->hdisplay +
+ right_border;
+ /* keep the blank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start + hblank_width;
+ /* get the hsync pos relative to hblank start */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start + hsync_pos;
+ /* keep the hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start + hsync_width;
+ adjusted_mode->crtc_vdisplay = mode->vdisplay;
+ /* use the border instead of border minus one */
+ adjusted_mode->crtc_vblank_start = mode->vdisplay +
+ bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start + vblank_width;
+ /* get the vsync start postion relative to vblank start */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start + vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start + vsync_width;
+ border = 1;
+ break;
+ case DRM_MODE_SCALE_ASPECT:
+ /* Scale but preserve the spect ratio */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev)) {
+ /* 965+ is easy, it does everything in hw */
+ if (panel_ratio > desired_ratio)
+ pfit_control |= PFIT_SCALING_PILLAR;
+ else if (panel_ratio < desired_ratio)
+ pfit_control |= PFIT_SCALING_LETTER;
+ else
+ pfit_control |= PFIT_SCALING_AUTO;
+ } else {
+ /*
+ * For earlier chips we have to calculate the scaling
+ * ratio by hand and program it into the
+ * PFIT_PGM_RATIO register
+ */
+ u32 horiz_bits, vert_bits, bits = 12;
+ horiz_ratio = mode->hdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->hdisplay;
+ vert_ratio = mode->vdisplay * PANEL_RATIO_FACTOR/
+ adjusted_mode->vdisplay;
+ horiz_scale = adjusted_mode->hdisplay *
+ PANEL_RATIO_FACTOR / mode->hdisplay;
+ vert_scale = adjusted_mode->vdisplay *
+ PANEL_RATIO_FACTOR / mode->vdisplay;
+
+ /* retain aspect ratio */
+ if (panel_ratio > desired_ratio) { /* Pillar */
+ u32 scaled_width;
+ scaled_width = mode->hdisplay * vert_scale /
+ PANEL_RATIO_FACTOR;
+ horiz_ratio = vert_ratio;
+ pfit_control |= (VERT_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Pillar will have left/right borders */
+ left_border = (adjusted_mode->hdisplay -
+ scaled_width) / 2;
+ right_border = left_border;
+ if (mode->hdisplay & 1) /* odd resolutions */
+ right_border++;
+ /* keep the border be even */
+ if (right_border & 1)
+ right_border++;
+ adjusted_mode->crtc_hdisplay = scaled_width;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_hblank_start =
+ scaled_width + right_border;
+ /* keep the hblank width constant */
+ adjusted_mode->crtc_hblank_end =
+ adjusted_mode->crtc_hblank_start +
+ hblank_width;
+ /*
+ * get the hsync start pos relative to
+ * hblank start
+ */
+ hsync_pos = (hblank_width - hsync_width) / 2;
+ /* keep the hsync_pos be even */
+ if (hsync_pos & 1)
+ hsync_pos++;
+ adjusted_mode->crtc_hsync_start =
+ adjusted_mode->crtc_hblank_start +
+ hsync_pos;
+ /* keept hsync width constant */
+ adjusted_mode->crtc_hsync_end =
+ adjusted_mode->crtc_hsync_start +
+ hsync_width;
+ border = 1;
+ } else if (panel_ratio < desired_ratio) { /* letter */
+ u32 scaled_height = mode->vdisplay *
+ horiz_scale / PANEL_RATIO_FACTOR;
+ vert_ratio = horiz_ratio;
+ pfit_control |= (HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ /* Letterbox will have top/bottom border */
+ top_border = (adjusted_mode->vdisplay -
+ scaled_height) / 2;
+ bottom_border = top_border;
+ if (mode->vdisplay & 1)
+ bottom_border++;
+ adjusted_mode->crtc_vdisplay = scaled_height;
+ /* use border instead of border minus one */
+ adjusted_mode->crtc_vblank_start =
+ scaled_height + bottom_border;
+ /* keep the vblank width constant */
+ adjusted_mode->crtc_vblank_end =
+ adjusted_mode->crtc_vblank_start +
+ vblank_width;
+ /*
+ * get the vsync start pos relative to
+ * vblank start
+ */
+ vsync_pos = (vblank_width - vsync_width) / 2;
+ adjusted_mode->crtc_vsync_start =
+ adjusted_mode->crtc_vblank_start +
+ vsync_pos;
+ /* keep the vsync width constant */
+ adjusted_mode->crtc_vsync_end =
+ adjusted_mode->crtc_vsync_start +
+ vsync_width;
+ border = 1;
+ } else {
+ /* Aspects match, Let hw scale both directions */
+ pfit_control |= (VERT_AUTO_SCALE |
+ HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ }
+ horiz_bits = (1 << bits) * horiz_ratio /
+ PANEL_RATIO_FACTOR;
+ vert_bits = (1 << bits) * vert_ratio /
+ PANEL_RATIO_FACTOR;
+ pfit_pgm_ratios =
+ ((vert_bits << PFIT_VERT_SCALE_SHIFT) &
+ PFIT_VERT_SCALE_MASK) |
+ ((horiz_bits << PFIT_HORIZ_SCALE_SHIFT) &
+ PFIT_HORIZ_SCALE_MASK);
+ }
+ break;
+
+ case DRM_MODE_SCALE_FULLSCREEN:
+ /*
+ * Full scaling, even if it changes the aspect ratio.
+ * Fortunately this is all done for us in hw.
+ */
+ pfit_control |= PFIT_ENABLE;
+ if (IS_I965G(dev))
+ pfit_control |= PFIT_SCALING_AUTO;
+ else
+ pfit_control |= (VERT_AUTO_SCALE | HORIZ_AUTO_SCALE |
+ VERT_INTERP_BILINEAR |
+ HORIZ_INTERP_BILINEAR);
+ break;
+ default:
+ break;
+ }
+
+out:
+ lvds_priv->pfit_control = pfit_control;
+ lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
+ /*
+ * When there exists the border, it means that the LVDS_BORDR
+ * should be enabled.
+ */
+ if (border)
+ dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+ else
+ dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg;
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ if (IS_IRONLAKE(dev))
+ reg = BLC_PWM_CPU_CTL;
+ else
+ reg = BLC_PWM_CTL;
+
+ dev_priv->saveBLC_PWM_CTL = I915_READ(reg);
dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
BACKLIGHT_DUTY_CYCLE_MASK);
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- u32 pfit_control;
+ struct intel_output *intel_output = enc_to_intel_output(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
* settings.
*/
+ if (IS_IRONLAKE(dev))
+ return;
+
/*
* Enable automatic panel scaling so that non-native modes fill the
* screen. Should be enabled before the pipe is enabled, according to
* register description and PRM.
*/
- if (mode->hdisplay != adjusted_mode->hdisplay ||
- mode->vdisplay != adjusted_mode->vdisplay)
- pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
- HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
- HORIZ_INTERP_BILINEAR);
- else
- pfit_control = 0;
-
- if (!IS_I965G(dev)) {
- if (dev_priv->panel_wants_dither || dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
- }
- else
- pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
-
- I915_WRITE(PFIT_CONTROL, pfit_control);
+ I915_WRITE(PFIT_PGM_RATIOS, lvds_priv->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
+/* Some lid devices report incorrect lid status, assume they're connected */
+static const struct dmi_system_id bad_lid_status[] = {
+ {
+ .ident = "Compaq nx9020",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_BOARD_NAME, "3084"),
+ },
+ },
+ {
+ .ident = "Samsung SX20S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
+ DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
+ },
+ },
+ {
+ .ident = "Aspire One",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
+ },
+ },
+ {
+ .ident = "Aspire 1810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"),
+ },
+ },
+ {
+ .ident = "PC-81005",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
+ },
+ },
+ {
+ .ident = "Clevo M5x0N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+ DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
+ },
+ },
+ { }
+};
+
/**
* Detect the LVDS connection.
*
- * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have
- * been set up if the LVDS was actually connected anyway.
+ * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
+ * connected and closed means disconnected. We also send hotplug events as
+ * needed, using lid status notification from the input layer.
*/
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
- return connector_status_connected;
+ struct drm_device *dev = connector->dev;
+ enum drm_connector_status status = connector_status_connected;
+
+ /* ACPI lid methods were generally unreliable in this generation, so
+ * don't even bother.
+ */
+ if (IS_GEN2(dev))
+ return connector_status_connected;
+
+ if (!dmi_check_system(bad_lid_status) && !acpi_lid_open())
+ status = connector_status_disconnected;
+
+ return status;
}
/**
return 0;
}
+/*
+ * Lid events. Note the use of 'modeset_on_lid':
+ * - we set it on lid close, and reset it on open
+ * - we use it as a "only once" bit (ie we ignore
+ * duplicate events where it was already properly
+ * set/reset)
+ * - the suspend/resume paths will also set it to
+ * zero, since they restore the mode ("lid open").
+ */
+static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
+ void *unused)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(nb, struct drm_i915_private, lid_notifier);
+ struct drm_device *dev = dev_priv->dev;
+ struct drm_connector *connector = dev_priv->int_lvds_connector;
+
+ /*
+ * check and update the status of LVDS connector after receiving
+ * the LID nofication event.
+ */
+ if (connector)
+ connector->status = connector->funcs->detect(connector);
+ if (!acpi_lid_open()) {
+ dev_priv->modeset_on_lid = 1;
+ return NOTIFY_OK;
+ }
+
+ if (!dev_priv->modeset_on_lid)
+ return NOTIFY_OK;
+
+ dev_priv->modeset_on_lid = 0;
+
+ mutex_lock(&dev->mode_config.mutex);
+ drm_helper_resume_force_mode(dev);
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return NOTIFY_OK;
+}
+
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
+ struct drm_device *dev = connector->dev;
struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (dev_priv->lid_notifier.notifier_call)
+ acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
uint64_t value)
{
struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+ struct intel_output *intel_output =
+ to_intel_output(connector);
+
+ if (property == dev->mode_config.scaling_mode_property &&
+ connector->encoder) {
+ struct drm_crtc *crtc = connector->encoder->crtc;
+ struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ if (value == DRM_MODE_SCALE_NONE) {
+ DRM_DEBUG_KMS("no scaling not supported\n");
+ return 0;
+ }
+ if (lvds_priv->fitting_mode == value) {
+ /* the LVDS scaling property is not changed */
+ return 0;
+ }
+ lvds_priv->fitting_mode = value;
+ if (crtc && crtc->enabled) {
+ /*
+ * If the CRTC is enabled, the display will be changed
+ * according to the new panel fitting mode.
+ */
+ drm_crtc_helper_set_mode(crtc, &crtc->mode,
+ crtc->x, crtc->y, crtc->fb);
+ }
+ }
return 0;
}
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_lvds_save,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
{
- DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+ DRM_DEBUG_KMS("Skipping LVDS initialization for %s\n", id->ident);
return 1;
}
/* These systems claim to have LVDS, but really don't */
-static const struct dmi_system_id __initdata intel_no_lvds[] = {
+static const struct dmi_system_id intel_no_lvds[] = {
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
},
},
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core 2 series)",
.matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
},
},
DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
},
},
-
- /* FIXME: add a check for the Aopen Mini PC */
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "i965GMx-IF"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "AOpen Mini PC MP915",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AOpen"),
+ DMI_MATCH(DMI_BOARD_NAME, "i915GMx-F"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Aopen i945GTt-VFA",
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
+ },
+ },
{ } /* terminating entry */
};
/**
+ * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
+ * @dev: drm device
+ * @connector: LVDS connector
+ *
+ * Find the reduced downclock for LVDS in EDID.
+ */
+static void intel_find_lvds_downclock(struct drm_device *dev,
+ struct drm_connector *connector)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_display_mode *scan, *panel_fixed_mode;
+ int temp_downclock;
+
+ panel_fixed_mode = dev_priv->panel_fixed_mode;
+ temp_downclock = panel_fixed_mode->clock;
+
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(scan, &connector->probed_modes, head) {
+ /*
+ * If one mode has the same resolution with the fixed_panel
+ * mode while they have the different refresh rate, it means
+ * that the reduced downclock is found for the LVDS. In such
+ * case we can set the different FPx0/1 to dynamically select
+ * between low and high frequency.
+ */
+ if (scan->hdisplay == panel_fixed_mode->hdisplay &&
+ scan->hsync_start == panel_fixed_mode->hsync_start &&
+ scan->hsync_end == panel_fixed_mode->hsync_end &&
+ scan->htotal == panel_fixed_mode->htotal &&
+ scan->vdisplay == panel_fixed_mode->vdisplay &&
+ scan->vsync_start == panel_fixed_mode->vsync_start &&
+ scan->vsync_end == panel_fixed_mode->vsync_end &&
+ scan->vtotal == panel_fixed_mode->vtotal) {
+ if (scan->clock < temp_downclock) {
+ /*
+ * The downclock is already found. But we
+ * expect to find the lower downclock.
+ */
+ temp_downclock = scan->clock;
+ }
+ }
+ }
+ mutex_unlock(&dev->mode_config.mutex);
+ if (temp_downclock < panel_fixed_mode->clock &&
+ i915_lvds_downclock) {
+ /* We found the downclock for LVDS. */
+ dev_priv->lvds_downclock_avail = 1;
+ dev_priv->lvds_downclock = temp_downclock;
+ DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
+ "Normal clock %dKhz, downclock %dKhz\n",
+ panel_fixed_mode->clock, temp_downclock);
+ }
+ return;
+}
+
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the LVDS is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the LVDS is present.
+ * Note: The addin_offset should also be checked for LVDS panel.
+ * Only when it is non-zero, it is assumed that it is present.
+ */
+static int lvds_is_present_in_vbt(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct child_device_config *p_child;
+ int i, ret;
+
+ if (!dev_priv->child_dev_num)
+ return 1;
+
+ ret = 0;
+ for (i = 0; i < dev_priv->child_dev_num; i++) {
+ p_child = dev_priv->child_dev + i;
+ /*
+ * If the device type is not LFP, continue.
+ * If the device type is 0x22, it is also regarded as LFP.
+ */
+ if (p_child->device_type != DEVICE_TYPE_INT_LFP &&
+ p_child->device_type != DEVICE_TYPE_LFP)
+ continue;
+
+ /* The addin_offset should be checked. Only when it is
+ * non-zero, it is regarded as present.
+ */
+ if (p_child->addin_offset) {
+ ret = 1;
+ break;
+ }
+ }
+ return ret;
+}
+
+/**
* intel_lvds_init - setup LVDS connectors on this device
* @dev: drm device
*
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
struct drm_crtc *crtc;
+ struct intel_lvds_priv *lvds_priv;
u32 lvds;
- int pipe;
+ int pipe, gpio = GPIOC;
/* Skip init on machines we know falsely report LVDS */
if (dmi_check_system(intel_no_lvds))
return;
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ if (!lvds_is_present_in_vbt(dev)) {
+ DRM_DEBUG_KMS("LVDS is not present in VBT\n");
+ return;
+ }
+
+ if (IS_IRONLAKE(dev)) {
+ if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
+ return;
+ if (dev_priv->edp_support) {
+ DRM_DEBUG_KMS("disable LVDS for eDP support\n");
+ return;
+ }
+ gpio = PCH_GPIOC;
+ }
+
+ intel_output = kzalloc(sizeof(struct intel_output) +
+ sizeof(struct intel_lvds_priv), GFP_KERNEL);
if (!intel_output) {
return;
}
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
intel_output->type = INTEL_OUTPUT_LVDS;
+ intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
+ lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
+ intel_output->dev_priv = lvds_priv;
+ /* create the scaling mode property */
+ drm_mode_create_scaling_mode_property(dev);
+ /*
+ * the initial panel fitting mode will be FULL_SCREEN.
+ */
+ drm_connector_attach_property(&intel_output->base,
+ dev->mode_config.scaling_mode_property,
+ DRM_MODE_SCALE_FULLSCREEN);
+ lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
/*
* LVDS discovery:
* 1) check for EDID on DDC
*/
/* Set up the DDC bus. */
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
+ intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
dev_priv->panel_fixed_mode =
drm_mode_duplicate(dev, scan);
mutex_unlock(&dev->mode_config.mutex);
+ intel_find_lvds_downclock(dev, connector);
goto out;
}
mutex_unlock(&dev->mode_config.mutex);
* on. If so, assume that whatever is currently programmed is the
* correct mode.
*/
+
+ /* Ironlake: FIXME if still fail, not try pipe mode now */
+ if (IS_IRONLAKE(dev))
+ goto failed;
+
lvds = I915_READ(LVDS);
pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
crtc = intel_get_crtc_from_pipe(dev, pipe);
goto failed;
out:
+ if (IS_IRONLAKE(dev)) {
+ u32 pwm;
+ /* make sure PWM is enabled */
+ pwm = I915_READ(BLC_PWM_CPU_CTL2);
+ pwm |= (PWM_ENABLE | PWM_PIPE_B);
+ I915_WRITE(BLC_PWM_CPU_CTL2, pwm);
+
+ pwm = I915_READ(BLC_PWM_PCH_CTL1);
+ pwm |= PWM_PCH_ENABLE;
+ I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+ }
+ dev_priv->lid_notifier.notifier_call = intel_lid_notify;
+ if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
+ DRM_DEBUG_KMS("lid notifier registration failed\n");
+ dev_priv->lid_notifier.notifier_call = NULL;
+ }
+ /* keep the LVDS connector */
+ dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
return;
failed:
- DRM_DEBUG("No LVDS modes found, disabling.\n");
+ DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
drm_connector_cleanup(connector);
- kfree(connector);
+ drm_encoder_cleanup(encoder);
+ kfree(intel_output);
}