#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
-#include "intel_dp.h"
+#include "drm_dp_helper.h"
#include "drm_crtc_helper.h"
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
intel_clock_t clock;
- int max_n;
- bool found;
int err_most = 47;
- found = false;
+ int err_min = 10000;
/* eDP has only 2 clock choice, no n/m/p setting */
if (HAS_eDP)
}
memset(best_clock, 0, sizeof(*best_clock));
- max_n = limit->n.max;
for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
/* based on hardware requriment prefer smaller n to precision */
- for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+ for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
/* based on hardware requirment prefere larger m1,m2 */
for (clock.m1 = limit->m1.max;
clock.m1 >= limit->m1.min; clock.m1--) {
this_err = abs((10000 - (target*10000/clock.dot)));
if (this_err < err_most) {
*best_clock = clock;
- err_most = this_err;
- max_n = clock.n;
- found = true;
/* found on first matching */
goto out;
+ } else if (this_err < err_min) {
+ *best_clock = clock;
+ err_min = this_err;
}
}
}
}
}
out:
- return found;
+ return true;
}
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
clock.p = (clock.p1 * clock.p2);
clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ clock.vco = 0;
memcpy(best_clock, &clock, sizeof(intel_clock_t));
return true;
}
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
+ intel_update_watermarks(dev);
+
/* Enable the DPLL */
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
- intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
intel_update_watermarks(dev);
IGD_CURSOR_GUARD_WM,
IGD_FIFO_LINE_SIZE
};
+static struct intel_watermark_params g4x_wm_info = {
+ G4X_FIFO_SIZE,
+ G4X_MAX_WM,
+ G4X_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static struct intel_watermark_params i945_wm_info = {
I945_FIFO_SIZE,
I915_MAX_WM,
return size;
}
-static void g4x_update_wm(struct drm_device *dev, int unused, int unused2,
- int unused3, int unused4)
+static void g4x_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 fw_blc_self = I915_READ(FW_BLC_SELF);
+ int total_size, cacheline_size;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
+ struct intel_watermark_params planea_params, planeb_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0, entries_required;
- if (i915_powersave)
- fw_blc_self |= FW_BLC_SELF_EN;
- else
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self);
+ /* Create copies of the base settings for each pipe */
+ planea_params = planeb_params = g4x_wm_info;
+
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
+
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planea_wm = entries_required + planea_params.guard_size;
+
+ entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planeb_wm = entries_required + planeb_params.guard_size;
+
+ cursora_wm = cursorb_wm = 16;
+ cursor_sr = 32;
+
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 12000;
+
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
+ planea_wm, planeb_wm, sr_entries);
+
+ planea_wm &= 0x3f;
+ planeb_wm &= 0x3f;
+
+ I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
+ I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ /* HPLL off in SR has some issues on G4x... disable it */
+ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+ (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
}
static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff