{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 temp;
+ u32 temp, reg;
- temp = I915_READ(ADPA);
+ if (IS_IRONLAKE(dev))
+ reg = PCH_ADPA;
+ else
+ reg = ADPA;
+
+ temp = I915_READ(reg);
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
temp &= ~ADPA_DAC_ENABLE;
break;
}
- I915_WRITE(ADPA, temp);
+ I915_WRITE(reg, temp);
}
static int intel_crt_mode_valid(struct drm_connector *connector,
struct drm_i915_private *dev_priv = dev->dev_private;
int dpll_md_reg;
u32 adpa, dpll_md;
+ u32 adpa_reg;
if (intel_crtc->pipe == 0)
dpll_md_reg = DPLL_A_MD;
else
dpll_md_reg = DPLL_B_MD;
+ if (IS_IRONLAKE(dev))
+ adpa_reg = PCH_ADPA;
+ else
+ adpa_reg = ADPA;
+
/*
* Disable separate mode multiplier used when cloning SDVO to CRT
* XXX this needs to be adjusted when we really are cloning
*/
- if (IS_I965G(dev)) {
+ if (IS_I965G(dev) && !IS_IRONLAKE(dev)) {
dpll_md = I915_READ(dpll_md_reg);
I915_WRITE(dpll_md_reg,
dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
if (intel_crtc->pipe == 0) {
adpa |= ADPA_PIPE_A_SELECT;
- I915_WRITE(BCLRPAT_A, 0);
+ if (!IS_IRONLAKE(dev))
+ I915_WRITE(BCLRPAT_A, 0);
} else {
adpa |= ADPA_PIPE_B_SELECT;
- I915_WRITE(BCLRPAT_B, 0);
+ if (!IS_IRONLAKE(dev))
+ I915_WRITE(BCLRPAT_B, 0);
}
- I915_WRITE(ADPA, adpa);
+ I915_WRITE(adpa_reg, adpa);
+}
+
+static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 adpa;
+ bool ret;
+
+ adpa = I915_READ(PCH_ADPA);
+
+ adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+
+ adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
+ ADPA_CRT_HOTPLUG_WARMUP_10MS |
+ ADPA_CRT_HOTPLUG_SAMPLE_4S |
+ ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
+ ADPA_CRT_HOTPLUG_VOLREF_325MV |
+ ADPA_CRT_HOTPLUG_ENABLE |
+ ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
+
+ DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
+ I915_WRITE(PCH_ADPA, adpa);
+
+ while ((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) != 0)
+ ;
+
+ /* Check the status to see if both blue and green are on now */
+ adpa = I915_READ(PCH_ADPA);
+ adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
+ if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
+ (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+ ret = true;
+ else
+ ret = false;
+
+ return ret;
}
/**
struct drm_i915_private *dev_priv = dev->dev_private;
u32 hotplug_en;
int i, tries = 0;
+
+ if (IS_IRONLAKE(dev))
+ return intel_ironlake_crt_detect_hotplug(connector);
+
/*
* On 4 series desktop, CRT detect sequence need to be done twice
* to get a reliable result.
else
tries = 1;
hotplug_en = I915_READ(PORT_HOTPLUG_EN);
- hotplug_en &= ~(CRT_HOTPLUG_MASK);
+ hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_GM45(dev))
+ if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
return intel_ddc_probe(intel_output);
}
+static enum drm_connector_status
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+{
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pipe = intel_crtc->pipe;
+ uint32_t save_bclrpat;
+ uint32_t save_vtotal;
+ uint32_t vtotal, vactive;
+ uint32_t vsample;
+ uint32_t vblank, vblank_start, vblank_end;
+ uint32_t dsl;
+ uint32_t bclrpat_reg;
+ uint32_t vtotal_reg;
+ uint32_t vblank_reg;
+ uint32_t vsync_reg;
+ uint32_t pipeconf_reg;
+ uint32_t pipe_dsl_reg;
+ uint8_t st00;
+ enum drm_connector_status status;
+
+ if (pipe == 0) {
+ bclrpat_reg = BCLRPAT_A;
+ vtotal_reg = VTOTAL_A;
+ vblank_reg = VBLANK_A;
+ vsync_reg = VSYNC_A;
+ pipeconf_reg = PIPEACONF;
+ pipe_dsl_reg = PIPEADSL;
+ } else {
+ bclrpat_reg = BCLRPAT_B;
+ vtotal_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ vsync_reg = VSYNC_B;
+ pipeconf_reg = PIPEBCONF;
+ pipe_dsl_reg = PIPEBDSL;
+ }
+
+ save_bclrpat = I915_READ(bclrpat_reg);
+ save_vtotal = I915_READ(vtotal_reg);
+ vblank = I915_READ(vblank_reg);
+
+ vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+ vactive = (save_vtotal & 0x7ff) + 1;
+
+ vblank_start = (vblank & 0xfff) + 1;
+ vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+ /* Set the border color to purple. */
+ I915_WRITE(bclrpat_reg, 0x500050);
+
+ if (IS_I9XX(dev)) {
+ uint32_t pipeconf = I915_READ(pipeconf_reg);
+ I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+ /* Wait for next Vblank to substitue
+ * border color for Color info */
+ intel_wait_for_vblank(dev);
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ status = ((st00 & (1 << 4)) != 0) ?
+ connector_status_connected :
+ connector_status_disconnected;
+
+ I915_WRITE(pipeconf_reg, pipeconf);
+ } else {
+ bool restore_vblank = false;
+ int count, detect;
+
+ /*
+ * If there isn't any border, add some.
+ * Yes, this will flicker
+ */
+ if (vblank_start <= vactive && vblank_end >= vtotal) {
+ uint32_t vsync = I915_READ(vsync_reg);
+ uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+ vblank_start = vsync_start;
+ I915_WRITE(vblank_reg,
+ (vblank_start - 1) |
+ ((vblank_end - 1) << 16));
+ restore_vblank = true;
+ }
+ /* sample in the vertical border, selecting the larger one */
+ if (vblank_start - vactive >= vtotal - vblank_end)
+ vsample = (vblank_start + vactive) >> 1;
+ else
+ vsample = (vtotal + vblank_end) >> 1;
+
+ /*
+ * Wait for the border to be displayed
+ */
+ while (I915_READ(pipe_dsl_reg) >= vactive)
+ ;
+ while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+ ;
+ /*
+ * Watch ST00 for an entire scanline
+ */
+ detect = 0;
+ count = 0;
+ do {
+ count++;
+ /* Read the ST00 VGA status register */
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ if (st00 & (1 << 4))
+ detect++;
+ } while ((I915_READ(pipe_dsl_reg) == dsl));
+
+ /* restore vblank if necessary */
+ if (restore_vblank)
+ I915_WRITE(vblank_reg, vblank);
+ /*
+ * If more than 3/4 of the scanline detected a monitor,
+ * then it is assumed to be present. This works even on i830,
+ * where there isn't any way to force the border color across
+ * the screen
+ */
+ status = detect * 4 > count * 3 ?
+ connector_status_connected :
+ connector_status_disconnected;
+ }
+
+ /* Restore previous settings */
+ I915_WRITE(bclrpat_reg, save_bclrpat);
+
+ return status;
+}
+
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_crtc *crtc;
+ int dpms_mode;
+ enum drm_connector_status status;
if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
if (intel_crt_detect_hotplug(connector))
if (intel_crt_detect_ddc(connector))
return connector_status_connected;
- /* TODO use load detect */
- return connector_status_unknown;
+ /* for pre-945g platforms use load detect */
+ if (encoder->crtc && encoder->crtc->enabled) {
+ status = intel_crt_load_detect(encoder->crtc, intel_output);
+ } else {
+ crtc = intel_get_load_detect_pipe(intel_output,
+ NULL, &dpms_mode);
+ if (crtc) {
+ status = intel_crt_load_detect(crtc, intel_output);
+ intel_release_load_detect_pipe(intel_output, dpms_mode);
+ } else
+ status = connector_status_unknown;
+ }
+
+ return status;
}
static void intel_crt_destroy(struct drm_connector *connector)
static int intel_crt_get_modes(struct drm_connector *connector)
{
+ int ret;
struct intel_output *intel_output = to_intel_output(connector);
- return intel_ddc_get_modes(intel_output);
+ struct i2c_adapter *ddcbus;
+ struct drm_device *dev = connector->dev;
+
+
+ ret = intel_ddc_get_modes(intel_output);
+ if (ret || !IS_G4X(dev))
+ goto end;
+
+ ddcbus = intel_output->ddc_bus;
+ /* Try to probe digital port for output in DVI-I -> VGA mode. */
+ intel_output->ddc_bus =
+ intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
+
+ if (!intel_output->ddc_bus) {
+ intel_output->ddc_bus = ddcbus;
+ dev_printk(KERN_ERR, &connector->dev->pdev->dev,
+ "DDC bus registration failed for CRTDDC_D.\n");
+ goto end;
+ }
+ /* Try to get modes by GPIOD port */
+ ret = intel_ddc_get_modes(intel_output);
+ intel_i2c_destroy(ddcbus);
+
+end:
+ return ret;
+
}
static int intel_crt_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t value)
{
- struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
return 0;
}
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_crt_destroy,
{
struct drm_connector *connector;
struct intel_output *intel_output;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 i2c_reg;
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output)
&intel_output->enc);
/* Set up the DDC bus. */
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+ if (IS_IRONLAKE(dev))
+ i2c_reg = PCH_GPIOA;
+ else {
+ i2c_reg = GPIOA;
+ /* Use VBT information for CRT DDC if available */
+ if (dev_priv->crt_ddc_bus != 0)
+ i2c_reg = dev_priv->crt_ddc_bus;
+ }
+ intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
if (!intel_output->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
}
intel_output->type = INTEL_OUTPUT_ANALOG;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT) |
+ (1 << INTEL_SDVO_LVDS_CLONE_BIT);
+ intel_output->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff