#include <linux/slab.h>
#include "edac_mc.h"
+#define E752X_REVISION " Ver: 2.0.0 " __DATE__
+
static int force_function_unhide;
#define e752x_printk(level, fmt, arg...) \
e752x_process_error_info(mci, &info, 1);
}
-static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+/* Return 1 if dual channel mode is active. Else return 0. */
+static inline int dual_channel_active(u16 ddrcsr)
+{
+ return (((ddrcsr >> 12) & 3) == 3);
+}
+
+static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
+ u16 ddrcsr)
+{
+ struct csrow_info *csrow;
+ unsigned long last_cumul_size;
+ int index, mem_dev, drc_chan;
+ int drc_drbg; /* DRB granularity 0=64mb, 1=128mb */
+ int drc_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */
+ u8 value;
+ u32 dra, drc, cumul_size;
+
+ pci_read_config_dword(pdev, E752X_DRA, &dra);
+ pci_read_config_dword(pdev, E752X_DRC, &drc);
+ drc_chan = dual_channel_active(ddrcsr);
+ drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */
+ drc_ddim = (drc >> 20) & 0x3;
+
+ /* The dram row boundary (DRB) reg values are boundary address for
+ * each DRAM row with a granularity of 64 or 128MB (single/dual
+ * channel operation). DRB regs are cumulative; therefore DRB7 will
+ * contain the total memory contained in all eight rows.
+ */
+ for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
+ /* mem_dev 0=x8, 1=x4 */
+ mem_dev = (dra >> (index * 4 + 2)) & 0x3;
+ csrow = &mci->csrows[index];
+
+ mem_dev = (mem_dev == 2);
+ pci_read_config_byte(pdev, E752X_DRB + index, &value);
+ /* convert a 128 or 64 MiB DRB to a page size. */
+ cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
+ debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ cumul_size);
+ if (cumul_size == last_cumul_size)
+ continue; /* not populated */
+
+ csrow->first_page = last_cumul_size;
+ csrow->last_page = cumul_size - 1;
+ csrow->nr_pages = cumul_size - last_cumul_size;
+ last_cumul_size = cumul_size;
+ csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
+ csrow->mtype = MEM_RDDR; /* only one type supported */
+ csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
+
+ /*
+ * if single channel or x8 devices then SECDED
+ * if dual channel and x4 then S4ECD4ED
+ */
+ if (drc_ddim) {
+ if (drc_chan && mem_dev) {
+ csrow->edac_mode = EDAC_S4ECD4ED;
+ mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
+ } else {
+ csrow->edac_mode = EDAC_SECDED;
+ mci->edac_cap |= EDAC_FLAG_SECDED;
+ }
+ } else
+ csrow->edac_mode = EDAC_NONE;
+ }
+}
+
+static void e752x_init_mem_map_table(struct pci_dev *pdev,
+ struct e752x_pvt *pvt)
{
- int rc = -ENODEV;
int index;
+ u8 value, last, row, stat8;
+
+ last = 0;
+ row = 0;
+
+ for (index = 0; index < 8; index += 2) {
+ pci_read_config_byte(pdev, E752X_DRB + index, &value);
+ /* test if there is a dimm in this slot */
+ if (value == last) {
+ /* no dimm in the slot, so flag it as empty */
+ pvt->map[index] = 0xff;
+ pvt->map[index + 1] = 0xff;
+ } else { /* there is a dimm in the slot */
+ pvt->map[index] = row;
+ row++;
+ last = value;
+ /* test the next value to see if the dimm is double
+ * sided
+ */
+ pci_read_config_byte(pdev, E752X_DRB + index + 1,
+ &value);
+ pvt->map[index + 1] = (value == last) ?
+ 0xff : /* the dimm is single sided,
+ so flag as empty */
+ row; /* this is a double sided dimm
+ to save the next row # */
+ row++;
+ last = value;
+ }
+ }
+
+ /* set the map type. 1 = normal, 0 = reversed */
+ pci_read_config_byte(pdev, E752X_DRM, &stat8);
+ pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
+}
+
+/* Return 0 on success or 1 on failure. */
+static int e752x_get_devs(struct pci_dev *pdev, int dev_idx,
+ struct e752x_pvt *pvt)
+{
+ struct pci_dev *dev;
+
+ pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
+ pvt->dev_info->err_dev,
+ pvt->bridge_ck);
+
+ if (pvt->bridge_ck == NULL)
+ pvt->bridge_ck = pci_scan_single_device(pdev->bus,
+ PCI_DEVFN(0, 1));
+
+ if (pvt->bridge_ck == NULL) {
+ e752x_printk(KERN_ERR, "error reporting device not found:"
+ "vendor %x device 0x%x (broken BIOS?)\n",
+ PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
+ return 1;
+ }
+
+ dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
+ NULL);
+
+ if (dev == NULL)
+ goto fail;
+
+ pvt->dev_d0f0 = dev;
+ pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
+
+ return 0;
+
+fail:
+ pci_dev_put(pvt->bridge_ck);
+ return 1;
+}
+
+static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt)
+{
+ struct pci_dev *dev;
+
+ dev = pvt->dev_d0f1;
+ /* Turn off error disable & SMI in case the BIOS turned it on */
+ pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
+ pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
+ pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
+ pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
+ pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
+ pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
+}
+
+static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
+{
u16 pci_data;
u8 stat8;
- struct mem_ctl_info *mci = NULL;
- struct e752x_pvt *pvt = NULL;
+ struct mem_ctl_info *mci;
+ struct e752x_pvt *pvt;
u16 ddrcsr;
- u32 drc;
int drc_chan; /* Number of channels 0=1chan,1=2chan */
- int drc_drbg; /* DRB granularity 0=64mb, 1=128mb */
- int drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */
- u32 dra;
- unsigned long last_cumul_size;
- struct pci_dev *dev = NULL;
struct e752x_error_info discard;
debugf0("%s(): mci\n", __func__);
if (!force_function_unhide && !(stat8 & (1 << 5))) {
printk(KERN_INFO "Contact your BIOS vendor to see if the "
"E752x error registers can be safely un-hidden\n");
- goto fail;
+ return -ENOMEM;
}
stat8 |= (1 << 5);
pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
- /* need to find out the number of channels */
- pci_read_config_dword(pdev, E752X_DRC, &drc);
pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr);
/* FIXME: should check >>12 or 0xf, true for all? */
/* Dual channel = 1, Single channel = 0 */
- drc_chan = (((ddrcsr >> 12) & 3) == 3);
- drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */
- drc_ddim = (drc >> 20) & 0x3;
+ drc_chan = dual_channel_active(ddrcsr);
mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1);
if (mci == NULL) {
- rc = -ENOMEM;
- goto fail;
+ return -ENOMEM;
}
debugf3("%s(): init mci\n", __func__);
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
mci->mod_name = EDAC_MOD_STR;
- mci->mod_ver = "$Revision: 1.5.2.11 $";
- mci->pdev = pdev;
+ mci->mod_ver = E752X_REVISION;
+ mci->dev = &pdev->dev;
debugf3("%s(): init pvt\n", __func__);
pvt = (struct e752x_pvt *) mci->pvt_info;
pvt->dev_info = &e752x_devs[dev_idx];
- pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
- pvt->dev_info->err_dev,
- pvt->bridge_ck);
-
- if (pvt->bridge_ck == NULL)
- pvt->bridge_ck = pci_scan_single_device(pdev->bus,
- PCI_DEVFN(0, 1));
+ pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
- if (pvt->bridge_ck == NULL) {
- e752x_printk(KERN_ERR, "error reporting device not found:"
- "vendor %x device 0x%x (broken BIOS?)\n",
- PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev);
- goto fail;
+ if (e752x_get_devs(pdev, dev_idx, pvt)) {
+ edac_mc_free(mci);
+ return -ENODEV;
}
- pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
debugf3("%s(): more mci init\n", __func__);
mci->ctl_name = pvt->dev_info->ctl_name;
mci->edac_check = e752x_check;
mci->ctl_page_to_phys = ctl_page_to_phys;
- /* find out the device types */
- pci_read_config_dword(pdev, E752X_DRA, &dra);
-
- /*
- * The dram row boundary (DRB) reg values are boundary address for
- * each DRAM row with a granularity of 64 or 128MB (single/dual
- * channel operation). DRB regs are cumulative; therefore DRB7 will
- * contain the total memory contained in all eight rows.
- */
- for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) {
- u8 value;
- u32 cumul_size;
-
- /* mem_dev 0=x8, 1=x4 */
- int mem_dev = (dra >> (index * 4 + 2)) & 0x3;
- struct csrow_info *csrow = &mci->csrows[index];
-
- mem_dev = (mem_dev == 2);
- pci_read_config_byte(mci->pdev, E752X_DRB + index, &value);
- /* convert a 128 or 64 MiB DRB to a page size. */
- cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
- cumul_size);
-
- if (cumul_size == last_cumul_size)
- continue; /* not populated */
-
- csrow->first_page = last_cumul_size;
- csrow->last_page = cumul_size - 1;
- csrow->nr_pages = cumul_size - last_cumul_size;
- last_cumul_size = cumul_size;
- csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */
- csrow->mtype = MEM_RDDR; /* only one type supported */
- csrow->dtype = mem_dev ? DEV_X4 : DEV_X8;
-
- /*
- * if single channel or x8 devices then SECDED
- * if dual channel and x4 then S4ECD4ED
- */
- if (drc_ddim) {
- if (drc_chan && mem_dev) {
- csrow->edac_mode = EDAC_S4ECD4ED;
- mci->edac_cap |= EDAC_FLAG_S4ECD4ED;
- } else {
- csrow->edac_mode = EDAC_SECDED;
- mci->edac_cap |= EDAC_FLAG_SECDED;
- }
- } else
- csrow->edac_mode = EDAC_NONE;
- }
-
- /* Fill in the memory map table */
- {
- u8 value;
- u8 last = 0;
- u8 row = 0;
-
- for (index = 0; index < 8; index += 2) {
- pci_read_config_byte(mci->pdev, E752X_DRB + index,
- &value);
-
- /* test if there is a dimm in this slot */
- if (value == last) {
- /* no dimm in the slot, so flag it as empty */
- pvt->map[index] = 0xff;
- pvt->map[index + 1] = 0xff;
- } else { /* there is a dimm in the slot */
- pvt->map[index] = row;
- row++;
- last = value;
- /* test the next value to see if the dimm is
- double sided */
- pci_read_config_byte(mci->pdev,
- E752X_DRB + index + 1,
- &value);
- pvt->map[index + 1] = (value == last) ?
- 0xff : /* the dimm is single sided,
- * so flag as empty
- */
- row; /* this is a double sided dimm
- * to save the next row #
- */
- row++;
- last = value;
- }
- }
- }
+ e752x_init_csrows(mci, pdev, ddrcsr);
+ e752x_init_mem_map_table(pdev, pvt);
/* set the map type. 1 = normal, 0 = reversed */
- pci_read_config_byte(mci->pdev, E752X_DRM, &stat8);
+ pci_read_config_byte(pdev, E752X_DRM, &stat8);
pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f));
mci->edac_cap |= EDAC_FLAG_NONE;
debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
/* load the top of low memory, remap base, and remap limit vars */
- pci_read_config_word(mci->pdev, E752X_TOLM, &pci_data);
+ pci_read_config_word(pdev, E752X_TOLM, &pci_data);
pvt->tolm = ((u32) pci_data) << 4;
- pci_read_config_word(mci->pdev, E752X_REMAPBASE, &pci_data);
+ pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data);
pvt->remapbase = ((u32) pci_data) << 14;
- pci_read_config_word(mci->pdev, E752X_REMAPLIMIT, &pci_data);
+ pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data);
pvt->remaplimit = ((u32) pci_data) << 14;
e752x_printk(KERN_INFO,
"tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm,
pvt->remapbase, pvt->remaplimit);
- if (edac_mc_add_mc(mci)) {
+ /* Here we assume that we will never see multiple instances of this
+ * type of memory controller. The ID is therefore hardcoded to 0.
+ */
+ if (edac_mc_add_mc(mci,0)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
- dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev,
- NULL);
- pvt->dev_d0f0 = dev;
- /* find the error reporting device and clear errors */
- dev = pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck);
- /* Turn off error disable & SMI in case the BIOS turned it on */
- pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00);
- pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00);
- pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00);
- pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00);
- pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00);
- pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00);
-
+ e752x_init_error_reporting_regs(pvt);
e752x_get_error_info(mci, &discard); /* clear other MCH errors */
/* get this far and it's successful */
return 0;
fail:
- if (mci) {
- if (pvt->dev_d0f0)
- pci_dev_put(pvt->dev_d0f0);
-
- if (pvt->dev_d0f1)
- pci_dev_put(pvt->dev_d0f1);
-
- if (pvt->bridge_ck)
- pci_dev_put(pvt->bridge_ck);
-
- edac_mc_free(mci);
- }
+ pci_dev_put(pvt->dev_d0f0);
+ pci_dev_put(pvt->dev_d0f1);
+ pci_dev_put(pvt->bridge_ck);
+ edac_mc_free(mci);
- return rc;
+ return -ENODEV;
}
/* returns count (>= 0), or negative on error */
debugf0("%s()\n", __func__);
- if ((mci = edac_mc_del_mc(pdev)) == NULL)
+ if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
return;
pvt = (struct e752x_pvt *) mci->pvt_info;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff