menuconfig DMADEVICES
bool "DMA Engine support"
- depends on !HIGHMEM64G && HAS_DMA
+ depends on HAS_DMA
help
DMA engines can do asynchronous data transfers without
involving the host CPU. Currently, this framework can be
DMA Device drivers supported by the configured arch, it may
be empty in some cases.
+config DMADEVICES_DEBUG
+ bool "DMA Engine debugging"
+ depends on DMADEVICES != n
+ help
+ This is an option for use by developers; most people should
+ say N here. This enables DMA engine core and driver debugging.
+
+config DMADEVICES_VDEBUG
+ bool "DMA Engine verbose debugging"
+ depends on DMADEVICES_DEBUG != n
+ help
+ This is an option for use by developers; most people should
+ say N here. This enables deeper (more verbose) debugging of
+ the DMA engine core and drivers.
+
+
if DMADEVICES
comment "DMA Devices"
+config ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ bool
+
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
+ select ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ select ASYNC_TX_DISABLE_PQ_VAL_DMA
+ select ASYNC_TX_DISABLE_XOR_VAL_DMA
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
config INTEL_IOP_ADMA
tristate "Intel IOP ADMA support"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
- select ASYNC_CORE
select DMA_ENGINE
help
Enable support for the Intel(R) IOP Series RAID engines.
+config DW_DMAC
+ tristate "Synopsys DesignWare AHB DMA support"
+ depends on AVR32
+ select DMA_ENGINE
+ default y if CPU_AT32AP7000
+ help
+ Support the Synopsys DesignWare AHB DMA controller. This
+ can be integrated in chips such as the Atmel AT32ap7000.
+
+config AT_HDMAC
+ tristate "Atmel AHB DMA support"
+ depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ select DMA_ENGINE
+ help
+ Support the Atmel AHB DMA controller. This can be integrated in
+ chips such as the Atmel AT91SAM9RL.
+
config FSL_DMA
- bool "Freescale MPC85xx/MPC83xx DMA support"
- depends on PPC
+ tristate "Freescale Elo and Elo Plus DMA support"
+ depends on FSL_SOC
select DMA_ENGINE
---help---
- Enable support for the Freescale DMA engine. Now, it support
- MPC8560/40, MPC8555, MPC8548 and MPC8641 processors.
- The MPC8349, MPC8360 is also supported.
+ Enable support for the Freescale Elo and Elo Plus DMA controllers.
+ The Elo is the DMA controller on some 82xx and 83xx parts, and the
+ Elo Plus is the DMA controller on 85xx and 86xx parts.
+
+config MPC512X_DMA
+ tristate "Freescale MPC512x built-in DMA engine support"
+ depends on PPC_MPC512x
+ select DMA_ENGINE
+ ---help---
+ Enable support for the Freescale MPC512x built-in DMA engine.
config MV_XOR
bool "Marvell XOR engine support"
depends on PLAT_ORION
- select ASYNC_CORE
select DMA_ENGINE
---help---
Enable support for the Marvell XOR engine.
+config MX3_IPU
+ bool "MX3x Image Processing Unit support"
+ depends on ARCH_MX3
+ select DMA_ENGINE
+ default y
+ help
+ If you plan to use the Image Processing unit in the i.MX3x, say
+ Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+ int "Number of dynamically mapped interrupts for IPU"
+ depends on MX3_IPU
+ range 2 137
+ default 4
+ help
+ Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+ To avoid bloating the irq_desc[] array we allocate a sufficient
+ number of IRQ slots and map them dynamically to specific sources.
+
+config TXX9_DMAC
+ tristate "Toshiba TXx9 SoC DMA support"
+ depends on MACH_TX49XX || MACH_TX39XX
+ select DMA_ENGINE
+ help
+ Support the TXx9 SoC internal DMA controller. This can be
+ integrated in chips such as the Toshiba TX4927/38/39.
+
+config SH_DMAE
+ tristate "Renesas SuperH DMAC support"
+ depends on SUPERH && SH_DMA
+ depends on !SH_DMA_API
+ select DMA_ENGINE
+ help
+ Enable support for the Renesas SuperH DMA controllers.
+
+config COH901318
+ bool "ST-Ericsson COH901318 DMA support"
+ select DMA_ENGINE
+ depends on ARCH_U300
+ help
+ Enable support for ST-Ericsson COH 901 318 DMA.
+
+config AMCC_PPC440SPE_ADMA
+ tristate "AMCC PPC440SPe ADMA support"
+ depends on 440SPe || 440SP
+ select DMA_ENGINE
+ select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+ help
+ Enable support for the AMCC PPC440SPe RAID engines.
+
+config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+ bool
+
config DMA_ENGINE
bool
Say Y here if you enabled INTEL_IOATDMA or FSL_DMA, otherwise
say N.
+config ASYNC_TX_DMA
+ bool "Async_tx: Offload support for the async_tx api"
+ depends on DMA_ENGINE
+ help
+ This allows the async_tx api to take advantage of offload engines for
+ memcpy, memset, xor, and raid6 p+q operations. If your platform has
+ a dma engine that can perform raid operations and you have enabled
+ MD_RAID456 say Y.
+
+ If unsure, say N.
+
config DMATEST
tristate "DMA Test client"
depends on DMA_ENGINE
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff