#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
};
struct moxa_port {
+ struct tty_port port;
struct moxa_board_conf *board;
- struct tty_struct *tty;
void __iomem *tableAddr;
int type;
- int close_delay;
- unsigned int count;
- int asyncflags;
int cflag;
unsigned long statusflags;
- wait_queue_head_t open_wait;
- u8 DCDState;
+ u8 DCDState; /* Protected by the port lock */
u8 lineCtrl;
u8 lowChkFlag;
};
};
/* statusflags */
-#define TXSTOPPED 0x1
-#define LOWWAIT 0x2
-#define EMPTYWAIT 0x4
-#define THROTTLE 0x8
+#define TXSTOPPED 1
+#define LOWWAIT 2
+#define EMPTYWAIT 3
#define SERIAL_DO_RESTART
static unsigned int moxaFuncTout = HZ / 2;
static unsigned int moxaLowWaterChk;
static DEFINE_MUTEX(moxa_openlock);
-/* Variables for insmod */
-#ifdef MODULE
+static DEFINE_SPINLOCK(moxa_lock);
+
static unsigned long baseaddr[MAX_BOARDS];
static unsigned int type[MAX_BOARDS];
static unsigned int numports[MAX_BOARDS];
-#endif
MODULE_AUTHOR("William Chen");
MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
MODULE_LICENSE("GPL");
-#ifdef MODULE
+MODULE_FIRMWARE("c218tunx.cod");
+MODULE_FIRMWARE("cp204unx.cod");
+MODULE_FIRMWARE("c320tunx.cod");
+
module_param_array(type, uint, NULL, 0);
MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
module_param_array(baseaddr, ulong, NULL, 0);
MODULE_PARM_DESC(baseaddr, "base address");
module_param_array(numports, uint, NULL, 0);
MODULE_PARM_DESC(numports, "numports (ignored for C218)");
-#endif
+
module_param(ttymajor, int, 0);
/*
static int moxa_write_room(struct tty_struct *);
static void moxa_flush_buffer(struct tty_struct *);
static int moxa_chars_in_buffer(struct tty_struct *);
-static void moxa_throttle(struct tty_struct *);
-static void moxa_unthrottle(struct tty_struct *);
static void moxa_set_termios(struct tty_struct *, struct ktermios *);
static void moxa_stop(struct tty_struct *);
static void moxa_start(struct tty_struct *);
unsigned int set, unsigned int clear);
static void moxa_poll(unsigned long);
static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
-static void moxa_setup_empty_event(struct tty_struct *);
-static void moxa_shut_down(struct moxa_port *);
+static void moxa_shutdown(struct tty_port *);
+static int moxa_carrier_raised(struct tty_port *);
+static void moxa_dtr_rts(struct tty_port *, int);
/*
* moxa board interface functions:
*/
static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
static int MoxaPortLineStatus(struct moxa_port *);
static void MoxaPortFlushData(struct moxa_port *, int);
-static int MoxaPortWriteData(struct moxa_port *, const unsigned char *, int);
+static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
static int MoxaPortReadData(struct moxa_port *);
static int MoxaPortTxQueue(struct moxa_port *);
static int MoxaPortRxQueue(struct moxa_port *);
* I/O functions
*/
+static DEFINE_SPINLOCK(moxafunc_lock);
+
static void moxa_wait_finish(void __iomem *ofsAddr)
{
unsigned long end = jiffies + moxaFuncTout;
static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
{
+ unsigned long flags;
+ spin_lock_irqsave(&moxafunc_lock, flags);
+ writew(arg, ofsAddr + FuncArg);
+ writew(cmd, ofsAddr + FuncCode);
+ moxa_wait_finish(ofsAddr);
+ spin_unlock_irqrestore(&moxafunc_lock, flags);
+}
+
+static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+ unsigned long flags;
+ u16 ret;
+ spin_lock_irqsave(&moxafunc_lock, flags);
writew(arg, ofsAddr + FuncArg);
writew(cmd, ofsAddr + FuncCode);
moxa_wait_finish(ofsAddr);
+ ret = readw(ofsAddr + FuncArg);
+ spin_unlock_irqrestore(&moxafunc_lock, flags);
+ return ret;
}
static void moxa_low_water_check(void __iomem *ofsAddr)
struct moxa_port *p;
unsigned int i, j;
- mutex_lock(&moxa_openlock);
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
memset(&tmp, 0, sizeof(tmp));
+ spin_lock_bh(&moxa_lock);
if (moxa_boards[i].ready) {
tmp.inq = MoxaPortRxQueue(p);
tmp.outq = MoxaPortTxQueue(p);
}
- if (copy_to_user(argm, &tmp, sizeof(tmp))) {
- mutex_unlock(&moxa_openlock);
+ spin_unlock_bh(&moxa_lock);
+ if (copy_to_user(argm, &tmp, sizeof(tmp)))
return -EFAULT;
- }
}
}
- mutex_unlock(&moxa_openlock);
break;
} case MOXA_GET_OQUEUE:
status = MoxaPortTxQueue(ch);
struct moxa_port *p;
unsigned int i, j;
- mutex_lock(&moxa_openlock);
for (i = 0; i < MAX_BOARDS; i++) {
p = moxa_boards[i].ports;
for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
+ struct tty_struct *ttyp;
memset(&tmp, 0, sizeof(tmp));
- if (!moxa_boards[i].ready)
+ spin_lock_bh(&moxa_lock);
+ if (!moxa_boards[i].ready) {
+ spin_unlock_bh(&moxa_lock);
goto copy;
+ }
status = MoxaPortLineStatus(p);
+ spin_unlock_bh(&moxa_lock);
+
if (status & 1)
tmp.cts = 1;
if (status & 2)
if (status & 4)
tmp.dcd = 1;
- if (!p->tty || !p->tty->termios)
+ ttyp = tty_port_tty_get(&p->port);
+ if (!ttyp || !ttyp->termios)
tmp.cflag = p->cflag;
else
- tmp.cflag = p->tty->termios->c_cflag;
+ tmp.cflag = ttyp->termios->c_cflag;
+ tty_kref_put(tty);
copy:
- if (copy_to_user(argm, &tmp, sizeof(tmp))) {
- mutex_unlock(&moxa_openlock);
+ if (copy_to_user(argm, &tmp, sizeof(tmp)))
return -EFAULT;
- }
}
}
- mutex_unlock(&moxa_openlock);
break;
}
case TIOCGSERIAL:
- mutex_lock(&moxa_openlock);
+ mutex_lock(&ch->port.mutex);
ret = moxa_get_serial_info(ch, argp);
- mutex_unlock(&moxa_openlock);
+ mutex_unlock(&ch->port.mutex);
break;
case TIOCSSERIAL:
- mutex_lock(&moxa_openlock);
+ mutex_lock(&ch->port.mutex);
ret = moxa_set_serial_info(ch, argp);
- mutex_unlock(&moxa_openlock);
+ mutex_unlock(&ch->port.mutex);
break;
default:
ret = -ENOIOCTLCMD;
return ret;
}
-static void moxa_break_ctl(struct tty_struct *tty, int state)
+static int moxa_break_ctl(struct tty_struct *tty, int state)
{
struct moxa_port *port = tty->driver_data;
moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
Magic_code);
+ return 0;
}
static const struct tty_operations moxa_ops = {
.flush_buffer = moxa_flush_buffer,
.chars_in_buffer = moxa_chars_in_buffer,
.ioctl = moxa_ioctl,
- .throttle = moxa_throttle,
- .unthrottle = moxa_unthrottle,
.set_termios = moxa_set_termios,
.stop = moxa_stop,
.start = moxa_start,
.tiocmset = moxa_tiocmset,
};
+static const struct tty_port_operations moxa_port_ops = {
+ .carrier_raised = moxa_carrier_raised,
+ .dtr_rts = moxa_dtr_rts,
+ .shutdown = moxa_shutdown,
+};
+
static struct tty_driver *moxaDriver;
static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
-static DEFINE_SPINLOCK(moxa_lock);
/*
* HW init
size_t len)
{
void __iomem *baseAddr = brd->basemem;
- const u16 *uptr = ptr;
+ const __le16 *uptr = ptr;
size_t wlen, len2, j;
unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
unsigned int i, retry;
}
for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
+ tty_port_init(&p->port);
+ p->port.ops = &moxa_port_ops;
p->type = PORT_16550A;
- p->close_delay = 5 * HZ / 10;
p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
- init_waitqueue_head(&p->open_wait);
}
switch (brd->boardType) {
/* pci hot-un-plug support */
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
- tty_hangup(brd->ports[a].tty);
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
+ struct tty_struct *tty = tty_port_tty_get(
+ &brd->ports[a].port);
+ if (tty) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
+ }
while (1) {
opened = 0;
for (a = 0; a < brd->numPorts; a++)
- if (brd->ports[a].asyncflags & ASYNC_INITIALIZED)
+ if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
opened++;
mutex_unlock(&moxa_openlock);
if (!opened)
{
unsigned int isabrds = 0;
int retval = 0;
+ struct moxa_board_conf *brd = moxa_boards;
+ unsigned int i;
printk(KERN_INFO "MOXA Intellio family driver version %s\n",
MOXA_VERSION);
}
/* Find the boards defined from module args. */
-#ifdef MODULE
- {
- struct moxa_board_conf *brd = moxa_boards;
- unsigned int i;
+
for (i = 0; i < MAX_BOARDS; i++) {
if (!baseaddr[i])
break;
isabrds++;
}
}
- }
-#endif
#ifdef CONFIG_PCI
retval = pci_register_driver(&moxa_pci_driver);
module_init(moxa_init);
module_exit(moxa_exit);
-static void moxa_close_port(struct moxa_port *ch)
+static void moxa_shutdown(struct tty_port *port)
{
- moxa_shut_down(ch);
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortDisable(ch);
MoxaPortFlushData(ch, 2);
- ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
- ch->tty->driver_data = NULL;
- ch->tty = NULL;
+ clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
}
-static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp,
- struct moxa_port *ch)
+static int moxa_carrier_raised(struct tty_port *port)
{
- DEFINE_WAIT(wait);
- int retval = 0;
- u8 dcd;
-
- while (1) {
- prepare_to_wait(&ch->open_wait, &wait, TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp)) {
-#ifdef SERIAL_DO_RESTART
- retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
- break;
- }
- spin_lock_bh(&moxa_lock);
- dcd = ch->DCDState;
- spin_unlock_bh(&moxa_lock);
- if (dcd)
- break;
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ int dcd;
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- finish_wait(&ch->open_wait, &wait);
+ spin_lock_irq(&port->lock);
+ dcd = ch->DCDState;
+ spin_unlock_irq(&port->lock);
+ return dcd;
+}
- return retval;
+static void moxa_dtr_rts(struct tty_port *port, int onoff)
+{
+ struct moxa_port *ch = container_of(port, struct moxa_port, port);
+ MoxaPortLineCtrl(ch, onoff, onoff);
}
+
static int moxa_open(struct tty_struct *tty, struct file *filp)
{
struct moxa_board_conf *brd;
return -ENODEV;
}
+ if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
+ mutex_unlock(&moxa_openlock);
+ return -ENODEV;
+ }
+
ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
- ch->count++;
+ ch->port.count++;
tty->driver_data = ch;
- ch->tty = tty;
- if (!(ch->asyncflags & ASYNC_INITIALIZED)) {
+ tty_port_tty_set(&ch->port, tty);
+ mutex_lock(&ch->port.mutex);
+ if (!(ch->port.flags & ASYNC_INITIALIZED)) {
ch->statusflags = 0;
moxa_set_tty_param(tty, tty->termios);
MoxaPortLineCtrl(ch, 1, 1);
MoxaPortEnable(ch);
MoxaSetFifo(ch, ch->type == PORT_16550A);
- ch->asyncflags |= ASYNC_INITIALIZED;
+ ch->port.flags |= ASYNC_INITIALIZED;
}
+ mutex_unlock(&ch->port.mutex);
mutex_unlock(&moxa_openlock);
- retval = 0;
- if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty))
- retval = moxa_block_till_ready(tty, filp, ch);
- mutex_lock(&moxa_openlock);
- if (retval) {
- if (ch->count) /* 0 means already hung up... */
- if (--ch->count == 0)
- moxa_close_port(ch);
- } else
- ch->asyncflags |= ASYNC_NORMAL_ACTIVE;
- mutex_unlock(&moxa_openlock);
-
+ retval = tty_port_block_til_ready(&ch->port, tty, filp);
+ if (retval == 0)
+ set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags);
return retval;
}
static void moxa_close(struct tty_struct *tty, struct file *filp)
{
- struct moxa_port *ch;
- int port;
-
- port = tty->index;
- if (port == MAX_PORTS || tty_hung_up_p(filp))
- return;
-
- mutex_lock(&moxa_openlock);
- ch = tty->driver_data;
- if (ch == NULL)
- goto unlock;
- if (tty->count == 1 && ch->count != 1) {
- printk(KERN_WARNING "moxa_close: bad serial port count; "
- "tty->count is 1, ch->count is %d\n", ch->count);
- ch->count = 1;
- }
- if (--ch->count < 0) {
- printk(KERN_WARNING "moxa_close: bad serial port count, "
- "device=%s\n", tty->name);
- ch->count = 0;
- }
- if (ch->count)
- goto unlock;
-
+ struct moxa_port *ch = tty->driver_data;
ch->cflag = tty->termios->c_cflag;
- if (ch->asyncflags & ASYNC_INITIALIZED) {
- moxa_setup_empty_event(tty);
- tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */
- }
-
- moxa_close_port(ch);
-unlock:
- mutex_unlock(&moxa_openlock);
+ tty_port_close(&ch->port, tty, filp);
}
static int moxa_write(struct tty_struct *tty,
return 0;
spin_lock_bh(&moxa_lock);
- len = MoxaPortWriteData(ch, buf, count);
+ len = MoxaPortWriteData(tty, buf, count);
spin_unlock_bh(&moxa_lock);
- ch->statusflags |= LOWWAIT;
+ set_bit(LOWWAIT, &ch->statusflags);
return len;
}
struct moxa_port *ch = tty->driver_data;
int chars;
- /*
- * Sigh...I have to check if driver_data is NULL here, because
- * if an open() fails, the TTY subsystem eventually calls
- * tty_wait_until_sent(), which calls the driver's chars_in_buffer()
- * routine. And since the open() failed, we return 0 here. TDJ
- */
- if (ch == NULL)
- return 0;
- lock_kernel();
chars = MoxaPortTxQueue(ch);
- if (chars) {
+ if (chars)
/*
* Make it possible to wakeup anything waiting for output
* in tty_ioctl.c, etc.
*/
- if (!(ch->statusflags & EMPTYWAIT))
- moxa_setup_empty_event(tty);
- }
- unlock_kernel();
+ set_bit(EMPTYWAIT, &ch->statusflags);
return chars;
}
static int moxa_tiocmget(struct tty_struct *tty, struct file *file)
{
- struct moxa_port *ch;
+ struct moxa_port *ch = tty->driver_data;
int flag = 0, dtr, rts;
- mutex_lock(&moxa_openlock);
- ch = tty->driver_data;
- if (!ch) {
- mutex_unlock(&moxa_openlock);
- return -EINVAL;
- }
-
MoxaPortGetLineOut(ch, &dtr, &rts);
if (dtr)
flag |= TIOCM_DTR;
flag |= TIOCM_DSR;
if (dtr & 4)
flag |= TIOCM_CD;
- mutex_unlock(&moxa_openlock);
return flag;
}
return 0;
}
-static void moxa_throttle(struct tty_struct *tty)
-{
- struct moxa_port *ch = tty->driver_data;
-
- ch->statusflags |= THROTTLE;
-}
-
-static void moxa_unthrottle(struct tty_struct *tty)
-{
- struct moxa_port *ch = tty->driver_data;
-
- ch->statusflags &= ~THROTTLE;
-}
-
static void moxa_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
return;
moxa_set_tty_param(tty, old_termios);
if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
- wake_up_interruptible(&ch->open_wait);
+ wake_up_interruptible(&ch->port.open_wait);
}
static void moxa_stop(struct tty_struct *tty)
if (ch == NULL)
return;
MoxaPortTxDisable(ch);
- ch->statusflags |= TXSTOPPED;
+ set_bit(TXSTOPPED, &ch->statusflags);
}
return;
MoxaPortTxEnable(ch);
- ch->statusflags &= ~TXSTOPPED;
+ clear_bit(TXSTOPPED, &ch->statusflags);
}
static void moxa_hangup(struct tty_struct *tty)
{
- struct moxa_port *ch;
-
- mutex_lock(&moxa_openlock);
- ch = tty->driver_data;
- if (ch == NULL) {
- mutex_unlock(&moxa_openlock);
- return;
- }
- ch->count = 0;
- moxa_close_port(ch);
- mutex_unlock(&moxa_openlock);
-
- wake_up_interruptible(&ch->open_wait);
+ struct moxa_port *ch = tty->driver_data;
+ tty_port_hangup(&ch->port);
}
static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
{
+ struct tty_struct *tty;
+ unsigned long flags;
dcd = !!dcd;
- if (dcd != p->DCDState && p->tty && C_CLOCAL(p->tty)) {
- if (!dcd)
- tty_hangup(p->tty);
+ spin_lock_irqsave(&p->port.lock, flags);
+ if (dcd != p->DCDState) {
+ p->DCDState = dcd;
+ spin_unlock_irqrestore(&p->port.lock, flags);
+ tty = tty_port_tty_get(&p->port);
+ if (tty && C_CLOCAL(tty) && !dcd)
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
- p->DCDState = dcd;
+ else
+ spin_unlock_irqrestore(&p->port.lock, flags);
}
static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
u16 __iomem *ip)
{
- struct tty_struct *tty = p->tty;
+ struct tty_struct *tty = tty_port_tty_get(&p->port);
void __iomem *ofsAddr;
- unsigned int inited = p->asyncflags & ASYNC_INITIALIZED;
+ unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
u16 intr;
if (tty) {
- if ((p->statusflags & EMPTYWAIT) &&
+ if (test_bit(EMPTYWAIT, &p->statusflags) &&
MoxaPortTxQueue(p) == 0) {
- p->statusflags &= ~EMPTYWAIT;
+ clear_bit(EMPTYWAIT, &p->statusflags);
tty_wakeup(tty);
}
- if ((p->statusflags & LOWWAIT) && !tty->stopped &&
+ if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
- p->statusflags &= ~LOWWAIT;
+ clear_bit(LOWWAIT, &p->statusflags);
tty_wakeup(tty);
}
- if (inited && !(p->statusflags & THROTTLE) &&
+ if (inited && !test_bit(TTY_THROTTLED, &tty->flags) &&
MoxaPortRxQueue(p) > 0) { /* RX */
MoxaPortReadData(p);
tty_schedule_flip(tty);
}
} else {
- p->statusflags &= ~EMPTYWAIT;
+ clear_bit(EMPTYWAIT, &p->statusflags);
MoxaPortFlushData(p, 0); /* flush RX */
}
if (!handle) /* nothing else to do */
- return 0;
+ goto put;
intr = readw(ip); /* port irq status */
if (intr == 0)
- return 0;
+ goto put;
writew(0, ip); /* ACK port */
ofsAddr = p->tableAddr;
ofsAddr + HostStat);
if (!inited)
- return 0;
+ goto put;
if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
tty_insert_flip_char(tty, 0, TTY_BREAK);
if (intr & IntrLine)
moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
+put:
+ tty_kref_put(tty);
return 0;
}
tty_encode_baud_rate(tty, baud, baud);
}
-static void moxa_setup_empty_event(struct tty_struct *tty)
-{
- struct moxa_port *ch = tty->driver_data;
-
- spin_lock_bh(&moxa_lock);
- ch->statusflags |= EMPTYWAIT;
- spin_unlock_bh(&moxa_lock);
-}
-
-static void moxa_shut_down(struct moxa_port *ch)
-{
- struct tty_struct *tp = ch->tty;
-
- if (!(ch->asyncflags & ASYNC_INITIALIZED))
- return;
-
- MoxaPortDisable(ch);
-
- /*
- * If we're a modem control device and HUPCL is on, drop RTS & DTR.
- */
- if (C_HUPCL(tp))
- MoxaPortLineCtrl(ch, 0, 0);
-
- spin_lock_bh(&moxa_lock);
- ch->asyncflags &= ~ASYNC_INITIALIZED;
- spin_unlock_bh(&moxa_lock);
-}
-
/*****************************************************************************
* Driver level functions: *
*****************************************************************************/
baud = MoxaPortSetBaud(port, baud);
if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
+ spin_lock_irq(&moxafunc_lock);
writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
writeb(FC_SetXonXoff, ofsAddr + FuncCode);
moxa_wait_finish(ofsAddr);
+ spin_unlock_irq(&moxafunc_lock);
}
return baud;
int val;
ofsAddr = port->tableAddr;
- if (MOXA_IS_320(port->board)) {
- moxafunc(ofsAddr, FC_LineStatus, 0);
- val = readw(ofsAddr + FuncArg);
- } else {
+ if (MOXA_IS_320(port->board))
+ val = moxafuncret(ofsAddr, FC_LineStatus, 0);
+ else
val = readw(ofsAddr + FlagStat) >> 4;
- }
val &= 0x0B;
if (val & 8)
val |= 4;
- spin_lock_bh(&moxa_lock);
moxa_new_dcdstate(port, val & 8);
- spin_unlock_bh(&moxa_lock);
val &= 7;
return val;
}
-static int MoxaPortWriteData(struct moxa_port *port,
+static int MoxaPortWriteData(struct tty_struct *tty,
const unsigned char *buffer, int len)
{
+ struct moxa_port *port = tty->driver_data;
void __iomem *baseAddr, *ofsAddr, *ofs;
unsigned int c, total;
u16 head, tail, tx_mask, spage, epage;
c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
if (c > len)
c = len;
- moxaLog.txcnt[port->tty->index] += c;
+ moxaLog.txcnt[port->port.tty->index] += c;
total = c;
if (spage == epage) {
bufhead = readw(ofsAddr + Ofs_txb);
static int MoxaPortReadData(struct moxa_port *port)
{
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty;
unsigned char *dst;
void __iomem *baseAddr, *ofsAddr, *ofs;
unsigned int count, len, total;
{
struct serial_struct tmp = {
.type = info->type,
- .line = info->tty->index,
- .flags = info->asyncflags,
+ .line = info->port.tty->index,
+ .flags = info->port.flags,
.baud_base = 921600,
- .close_delay = info->close_delay
+ .close_delay = info->port.close_delay
};
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
if (!capable(CAP_SYS_ADMIN)) {
if (((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->asyncflags & ~ASYNC_USR_MASK)))
+ (info->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
} else
- info->close_delay = new_serial.close_delay * HZ / 100;
+ info->port.close_delay = new_serial.close_delay * HZ / 100;
new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
- new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
+ new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
MoxaSetFifo(info, new_serial.type == PORT_16550A);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff