/*****************************************************************************/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/device.h>
#include <linux/wait.h>
+#include <linux/eisa.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_PCI
#include <linux/pci.h>
-#endif
/*****************************************************************************/
/*{ BRD_ECP, 0x2a0, 0, 0xcc000, 0, 0 },*/
};
-static int stli_nrbrds = sizeof(stli_brdconf) / sizeof(stlconf_t);
+static int stli_nrbrds = ARRAY_SIZE(stli_brdconf);
+
+/* stli_lock must NOT be taken holding brd_lock */
+static spinlock_t stli_lock; /* TTY logic lock */
+static spinlock_t brd_lock; /* Board logic lock */
/*
* There is some experimental EISA board detection code in this driver.
static struct tty_driver *stli_serial;
-/*
- * We will need to allocate a temporary write buffer for chars that
- * come direct from user space. The problem is that a copy from user
- * space might cause a page fault (typically on a system that is
- * swapping!). All ports will share one buffer - since if the system
- * is already swapping a shared buffer won't make things any worse.
- */
-static char *stli_tmpwritebuf;
-static DECLARE_MUTEX(stli_tmpwritesem);
#define STLI_TXBUFSIZE 4096
/*****************************************************************************/
-#ifdef MODULE
/*
* Define some string labels for arguments passed from the module
* load line. These allow for easy board definitions, and easy
MODULE_LICENSE("GPL");
-MODULE_PARM(board0, "1-3s");
+module_param_array(board0, charp, NULL, 0);
MODULE_PARM_DESC(board0, "Board 0 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board1, "1-3s");
+module_param_array(board1, charp, NULL, 0);
MODULE_PARM_DESC(board1, "Board 1 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board2, "1-3s");
+module_param_array(board2, charp, NULL, 0);
MODULE_PARM_DESC(board2, "Board 2 config -> name[,ioaddr[,memaddr]");
-MODULE_PARM(board3, "1-3s");
+module_param_array(board3, charp, NULL, 0);
MODULE_PARM_DESC(board3, "Board 3 config -> name[,ioaddr[,memaddr]");
-#endif
-
/*
* Set up a default memory address table for EISA board probing.
* The default addresses are all bellow 1Mbyte, which has to be the
0xff000000, 0xff010000, 0xff020000, 0xff030000,
};
-static int stli_eisamempsize = sizeof(stli_eisamemprobeaddrs) / sizeof(unsigned long);
+static int stli_eisamempsize = ARRAY_SIZE(stli_eisamemprobeaddrs);
/*
* Define the Stallion PCI vendor and device IDs.
#endif
static struct pci_device_id istallion_pci_tbl[] = {
- { PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA), },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, istallion_pci_tbl);
* Prototype all functions in this driver!
*/
-#ifdef MODULE
-static void stli_argbrds(void);
static int stli_parsebrd(stlconf_t *confp, char **argp);
-
-static unsigned long stli_atol(char *str);
-#endif
-
-int stli_init(void);
+static int stli_init(void);
static int stli_open(struct tty_struct *tty, struct file *filp);
static void stli_close(struct tty_struct *tty, struct file *filp);
static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count);
static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp);
static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp);
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
-static void stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp);
+static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp);
static int stli_initopen(stlibrd_t *brdp, stliport_t *portp);
static int stli_setport(stliport_t *portp);
static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
-static void stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp);
+static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback);
+static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp);
static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp);
static int stli_getportstruct(stliport_t __user *arg);
static int stli_getbrdstruct(stlibrd_t __user *arg);
-static void *stli_memalloc(int len);
static stlibrd_t *stli_allocbrd(void);
static void stli_ecpinit(stlibrd_t *brdp);
static struct class *istallion_class;
-#ifdef MODULE
-
/*
* Loadable module initialization stuff.
*/
static int __init istallion_module_init(void)
{
- unsigned long flags;
-
-#ifdef DEBUG
- printk("init_module()\n");
-#endif
-
- save_flags(flags);
- cli();
stli_init();
- restore_flags(flags);
-
- return(0);
+ return 0;
}
/*****************************************************************************/
{
stlibrd_t *brdp;
stliport_t *portp;
- unsigned long flags;
int i, j;
-#ifdef DEBUG
- printk("cleanup_module()\n");
-#endif
-
printk(KERN_INFO "Unloading %s: version %s\n", stli_drvtitle,
stli_drvversion);
- save_flags(flags);
- cli();
-
-/*
- * Free up all allocated resources used by the ports. This includes
- * memory and interrupts.
- */
+ /*
+ * Free up all allocated resources used by the ports. This includes
+ * memory and interrupts.
+ */
if (stli_timeron) {
stli_timeron = 0;
- del_timer(&stli_timerlist);
+ del_timer_sync(&stli_timerlist);
}
i = tty_unregister_driver(stli_serial);
if (i) {
printk("STALLION: failed to un-register tty driver, "
"errno=%d\n", -i);
- restore_flags(flags);
return;
}
put_tty_driver(stli_serial);
- for (i = 0; i < 4; i++) {
- devfs_remove("staliomem/%d", i);
+ for (i = 0; i < 4; i++)
class_device_destroy(istallion_class, MKDEV(STL_SIOMEMMAJOR, i));
- }
- devfs_remove("staliomem");
class_destroy(istallion_class);
if ((i = unregister_chrdev(STL_SIOMEMMAJOR, "staliomem")))
printk("STALLION: failed to un-register serial memory device, "
"errno=%d\n", -i);
- if (stli_tmpwritebuf != (char *) NULL)
- kfree(stli_tmpwritebuf);
- if (stli_txcookbuf != (char *) NULL)
- kfree(stli_txcookbuf);
+
+ kfree(stli_txcookbuf);
for (i = 0; (i < stli_nrbrds); i++) {
- if ((brdp = stli_brds[i]) == (stlibrd_t *) NULL)
+ if ((brdp = stli_brds[i]) == NULL)
continue;
for (j = 0; (j < STL_MAXPORTS); j++) {
portp = brdp->ports[j];
- if (portp != (stliport_t *) NULL) {
- if (portp->tty != (struct tty_struct *) NULL)
+ if (portp != NULL) {
+ if (portp->tty != NULL)
tty_hangup(portp->tty);
kfree(portp);
}
if (brdp->iosize > 0)
release_region(brdp->iobase, brdp->iosize);
kfree(brdp);
- stli_brds[i] = (stlibrd_t *) NULL;
+ stli_brds[i] = NULL;
}
-
- restore_flags(flags);
}
module_init(istallion_module_init);
static void stli_argbrds(void)
{
- stlconf_t conf;
- stlibrd_t *brdp;
- int nrargs, i;
-
-#ifdef DEBUG
- printk("stli_argbrds()\n");
-#endif
-
- nrargs = sizeof(stli_brdsp) / sizeof(char **);
+ stlconf_t conf;
+ stlibrd_t *brdp;
+ int i;
- for (i = stli_nrbrds; (i < nrargs); i++) {
+ for (i = stli_nrbrds; i < ARRAY_SIZE(stli_brdsp); i++) {
memset(&conf, 0, sizeof(conf));
if (stli_parsebrd(&conf, stli_brdsp[i]) == 0)
continue;
- if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL)
+ if ((brdp = stli_allocbrd()) == NULL)
continue;
stli_nrbrds = i + 1;
brdp->brdnr = i;
static unsigned long stli_atol(char *str)
{
- unsigned long val;
- int base, c;
- char *sp;
+ unsigned long val;
+ int base, c;
+ char *sp;
val = 0;
sp = str;
static int stli_parsebrd(stlconf_t *confp, char **argp)
{
- char *sp;
- int nrbrdnames, i;
-
-#ifdef DEBUG
- printk("stli_parsebrd(confp=%x,argp=%x)\n", (int) confp, (int) argp);
-#endif
+ char *sp;
+ int i;
- if ((argp[0] == (char *) NULL) || (*argp[0] == 0))
- return(0);
+ if (argp[0] == NULL || *argp[0] == 0)
+ return 0;
for (sp = argp[0], i = 0; ((*sp != 0) && (i < 25)); sp++, i++)
*sp = TOLOWER(*sp);
- nrbrdnames = sizeof(stli_brdstr) / sizeof(stlibrdtype_t);
- for (i = 0; (i < nrbrdnames); i++) {
+ for (i = 0; i < ARRAY_SIZE(stli_brdstr); i++) {
if (strcmp(stli_brdstr[i].name, argp[0]) == 0)
break;
}
- if (i >= nrbrdnames) {
+ if (i == ARRAY_SIZE(stli_brdstr)) {
printk("STALLION: unknown board name, %s?\n", argp[0]);
- return(0);
+ return 0;
}
confp->brdtype = stli_brdstr[i].type;
- if ((argp[1] != (char *) NULL) && (*argp[1] != 0))
+ if (argp[1] != NULL && *argp[1] != 0)
confp->ioaddr1 = stli_atol(argp[1]);
- if ((argp[2] != (char *) NULL) && (*argp[2] != 0))
+ if (argp[2] != NULL && *argp[2] != 0)
confp->memaddr = stli_atol(argp[2]);
return(1);
}
-#endif
-
-/*****************************************************************************/
-
-/*
- * Local driver kernel malloc routine.
- */
-
-static void *stli_memalloc(int len)
-{
- return((void *) kmalloc(len, GFP_KERNEL));
-}
-
/*****************************************************************************/
static int stli_open(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- unsigned int minordev;
- int brdnr, portnr, rc;
-
-#ifdef DEBUG
- printk("stli_open(tty=%x,filp=%x): device=%s\n", (int) tty,
- (int) filp, tty->name);
-#endif
+ stlibrd_t *brdp;
+ stliport_t *portp;
+ unsigned int minordev;
+ int brdnr, portnr, rc;
minordev = tty->index;
brdnr = MINOR2BRD(minordev);
if (brdnr >= stli_nrbrds)
- return(-ENODEV);
+ return -ENODEV;
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
if ((brdp->state & BST_STARTED) == 0)
- return(-ENODEV);
+ return -ENODEV;
portnr = MINOR2PORT(minordev);
if ((portnr < 0) || (portnr > brdp->nrports))
- return(-ENODEV);
+ return -ENODEV;
portp = brdp->ports[portnr];
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
+ if (portp == NULL)
+ return -ENODEV;
if (portp->devnr < 1)
- return(-ENODEV);
+ return -ENODEV;
/*
if (portp->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&portp->close_wait);
if (portp->flags & ASYNC_HUP_NOTIFY)
- return(-EAGAIN);
- return(-ERESTARTSYS);
+ return -EAGAIN;
+ return -ERESTARTSYS;
}
/*
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_INITIALIZING, &portp->state));
if (signal_pending(current))
- return(-ERESTARTSYS);
+ return -ERESTARTSYS;
if ((portp->flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
clear_bit(ST_INITIALIZING, &portp->state);
wake_up_interruptible(&portp->raw_wait);
if (rc < 0)
- return(rc);
+ return rc;
}
/*
if (portp->flags & ASYNC_CLOSING) {
interruptible_sleep_on(&portp->close_wait);
if (portp->flags & ASYNC_HUP_NOTIFY)
- return(-EAGAIN);
- return(-ERESTARTSYS);
+ return -EAGAIN;
+ return -ERESTARTSYS;
}
/*
*/
if (!(filp->f_flags & O_NONBLOCK)) {
if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0)
- return(rc);
+ return rc;
}
portp->flags |= ASYNC_NORMAL_ACTIVE;
- return(0);
+ return 0;
}
/*****************************************************************************/
static void stli_close(struct tty_struct *tty, struct file *filp)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_close(tty=%x,filp=%x)\n", (int) tty, (int) filp);
-#endif
+ stlibrd_t *brdp;
+ stliport_t *portp;
+ unsigned long flags;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&stli_lock, flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&stli_lock, flags);
return;
}
if ((tty->count == 1) && (portp->refcount != 1))
portp->refcount = 1;
if (portp->refcount-- > 1) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&stli_lock, flags);
return;
}
if (tty == stli_txcooktty)
stli_flushchars(tty);
tty->closing = 1;
+ spin_unlock_irqrestore(&stli_lock, flags);
+
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
stli_flushbuffer(tty);
tty->closing = 0;
- portp->tty = (struct tty_struct *) NULL;
+ portp->tty = NULL;
if (portp->openwaitcnt) {
if (portp->close_delay)
portp->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&portp->close_wait);
- restore_flags(flags);
}
/*****************************************************************************/
static int stli_initopen(stlibrd_t *brdp, stliport_t *portp)
{
- struct tty_struct *tty;
- asynotify_t nt;
- asyport_t aport;
- int rc;
-
-#ifdef DEBUG
- printk("stli_initopen(brdp=%x,portp=%x)\n", (int) brdp, (int) portp);
-#endif
+ struct tty_struct *tty;
+ asynotify_t nt;
+ asyport_t aport;
+ int rc;
if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0)
- return(rc);
+ return rc;
memset(&nt, 0, sizeof(asynotify_t));
nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK);
nt.signal = SG_DCD;
if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt,
sizeof(asynotify_t), 0)) < 0)
- return(rc);
+ return rc;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
- return(-ENODEV);
+ if (tty == NULL)
+ return -ENODEV;
stli_mkasyport(portp, &aport, tty->termios);
if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
sizeof(asyport_t), 0)) < 0)
- return(rc);
+ return rc;
set_bit(ST_GETSIGS, &portp->state);
if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig,
sizeof(asysigs_t), 1)) < 0)
- return(rc);
+ return rc;
if (test_and_clear_bit(ST_GETSIGS, &portp->state))
portp->sigs = stli_mktiocm(portp->asig.sigvalue);
stli_mkasysigs(&portp->asig, 1, 1);
if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
sizeof(asysigs_t), 0)) < 0)
- return(rc);
+ return rc;
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
{
- volatile cdkhdr_t *hdrp;
- volatile cdkctrl_t *cp;
- volatile unsigned char *bits;
- unsigned long flags;
- int rc;
-
-#ifdef DEBUG
- printk("stli_rawopen(brdp=%x,portp=%x,arg=%x,wait=%d)\n",
- (int) brdp, (int) portp, (int) arg, wait);
-#endif
+ cdkhdr_t __iomem *hdrp;
+ cdkctrl_t __iomem *cp;
+ unsigned char __iomem *bits;
+ unsigned long flags;
+ int rc;
/*
* Send a message to the slave to open this port.
*/
- save_flags(flags);
- cli();
/*
* Slave is already closing this port. This can happen if a hangup
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
- restore_flags(flags);
return -ERESTARTSYS;
}
* memory. Once the message is in set the service bits to say that
* this port wants service.
*/
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
- cp->openarg = arg;
- cp->open = 1;
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+ cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+ writel(arg, &cp->openarg);
+ writeb(1, &cp->open);
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
portp->portidx;
- *bits |= portp->portbit;
+ writeb(readb(bits) | portp->portbit, bits);
EBRDDISABLE(brdp);
if (wait == 0) {
- restore_flags(flags);
- return(0);
+ spin_unlock_irqrestore(&brd_lock, flags);
+ return 0;
}
/*
*/
rc = 0;
set_bit(ST_OPENING, &portp->state);
+ spin_unlock_irqrestore(&brd_lock, flags);
+
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_OPENING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
- restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
rc = -EIO;
- return(rc);
+ return rc;
}
/*****************************************************************************/
static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
{
- volatile cdkhdr_t *hdrp;
- volatile cdkctrl_t *cp;
- volatile unsigned char *bits;
- unsigned long flags;
- int rc;
-
-#ifdef DEBUG
- printk("stli_rawclose(brdp=%x,portp=%x,arg=%x,wait=%d)\n",
- (int) brdp, (int) portp, (int) arg, wait);
-#endif
-
- save_flags(flags);
- cli();
+ cdkhdr_t __iomem *hdrp;
+ cdkctrl_t __iomem *cp;
+ unsigned char __iomem *bits;
+ unsigned long flags;
+ int rc;
/*
* Slave is already closing this port. This can happen if a hangup
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current)) {
- restore_flags(flags);
return -ERESTARTSYS;
}
}
/*
* Write the close command into shared memory.
*/
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
- cp->closearg = arg;
- cp->close = 1;
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+ cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+ writel(arg, &cp->closearg);
+ writeb(1, &cp->close);
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
portp->portidx;
- *bits |= portp->portbit;
+ writeb(readb(bits) |portp->portbit, bits);
EBRDDISABLE(brdp);
set_bit(ST_CLOSING, &portp->state);
- if (wait == 0) {
- restore_flags(flags);
- return(0);
- }
+ spin_unlock_irqrestore(&brd_lock, flags);
+
+ if (wait == 0)
+ return 0;
/*
* Slave is in action, so now we must wait for the open acknowledgment
!test_bit(ST_CLOSING, &portp->state));
if (signal_pending(current))
rc = -ERESTARTSYS;
- restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
rc = -EIO;
- return(rc);
+ return rc;
}
/*****************************************************************************/
static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
{
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_cmdwait(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,"
- "copyback=%d)\n", (int) brdp, (int) portp, (int) cmd,
- (int) arg, size, copyback);
-#endif
-
- save_flags(flags);
- cli();
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
- if (signal_pending(current)) {
- restore_flags(flags);
+ if (signal_pending(current))
return -ERESTARTSYS;
- }
stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_CMDING, &portp->state));
- if (signal_pending(current)) {
- restore_flags(flags);
+ if (signal_pending(current))
return -ERESTARTSYS;
- }
- restore_flags(flags);
if (portp->rc != 0)
- return(-EIO);
- return(0);
+ return -EIO;
+ return 0;
}
/*****************************************************************************/
static int stli_setport(stliport_t *portp)
{
- stlibrd_t *brdp;
- asyport_t aport;
-
-#ifdef DEBUG
- printk("stli_setport(portp=%x)\n", (int) portp);
-#endif
+ stlibrd_t *brdp;
+ asyport_t aport;
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
- if (portp->tty == (struct tty_struct *) NULL)
- return(-ENODEV);
- if ((portp->brdnr < 0) && (portp->brdnr >= stli_nrbrds))
- return(-ENODEV);
+ if (portp == NULL)
+ return -ENODEV;
+ if (portp->tty == NULL)
+ return -ENODEV;
+ if (portp->brdnr < 0 && portp->brdnr >= stli_nrbrds)
+ return -ENODEV;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
stli_mkasyport(portp, &aport, portp->tty->termios);
return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
static int stli_waitcarrier(stlibrd_t *brdp, stliport_t *portp, struct file *filp)
{
- unsigned long flags;
- int rc, doclocal;
-
-#ifdef DEBUG
- printk("stli_waitcarrier(brdp=%x,portp=%x,filp=%x)\n",
- (int) brdp, (int) portp, (int) filp);
-#endif
+ unsigned long flags;
+ int rc, doclocal;
rc = 0;
doclocal = 0;
if (portp->tty->termios->c_cflag & CLOCAL)
doclocal++;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&stli_lock, flags);
portp->openwaitcnt++;
if (! tty_hung_up_p(filp))
portp->refcount--;
+ spin_unlock_irqrestore(&stli_lock, flags);
for (;;) {
stli_mkasysigs(&portp->asig, 1, 1);
interruptible_sleep_on(&portp->open_wait);
}
+ spin_lock_irqsave(&stli_lock, flags);
if (! tty_hung_up_p(filp))
portp->refcount++;
portp->openwaitcnt--;
- restore_flags(flags);
+ spin_unlock_irqrestore(&stli_lock, flags);
- return(rc);
+ return rc;
}
/*****************************************************************************/
static int stli_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
- volatile cdkasy_t *ap;
- volatile cdkhdr_t *hdrp;
- volatile unsigned char *bits;
- unsigned char *shbuf, *chbuf;
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned int len, stlen, head, tail, size;
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_write(tty=%x,buf=%x,count=%d)\n",
- (int) tty, (int) buf, count);
-#endif
+ cdkasy_t __iomem *ap;
+ cdkhdr_t __iomem *hdrp;
+ unsigned char __iomem *bits;
+ unsigned char __iomem *shbuf;
+ unsigned char *chbuf;
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned int len, stlen, head, tail, size;
+ unsigned long flags;
- if ((tty == (struct tty_struct *) NULL) ||
- (stli_tmpwritebuf == (char *) NULL))
- return(0);
if (tty == stli_txcooktty)
stli_flushchars(tty);
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return(0);
+ if (portp == NULL)
+ return 0;
if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
chbuf = (unsigned char *) buf;
/*
* All data is now local, shove as much as possible into shared memory.
*/
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- head = (unsigned int) ap->txq.head;
- tail = (unsigned int) ap->txq.tail;
- if (tail != ((unsigned int) ap->txq.tail))
- tail = (unsigned int) ap->txq.tail;
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
+ head = (unsigned int) readw(&ap->txq.head);
+ tail = (unsigned int) readw(&ap->txq.tail);
+ if (tail != ((unsigned int) readw(&ap->txq.tail)))
+ tail = (unsigned int) readw(&ap->txq.tail);
size = portp->txsize;
if (head >= tail) {
len = size - (head - tail) - 1;
len = MIN(len, count);
count = 0;
- shbuf = (char *) EBRDGETMEMPTR(brdp, portp->txoffset);
+ shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->txoffset);
while (len > 0) {
stlen = MIN(len, stlen);
- memcpy((shbuf + head), chbuf, stlen);
+ memcpy_toio(shbuf + head, chbuf, stlen);
chbuf += stlen;
len -= stlen;
count += stlen;
}
}
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- ap->txq.head = head;
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
+ writew(head, &ap->txq.head);
if (test_bit(ST_TXBUSY, &portp->state)) {
- if (ap->changed.data & DT_TXEMPTY)
- ap->changed.data &= ~DT_TXEMPTY;
+ if (readl(&ap->changed.data) & DT_TXEMPTY)
+ writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
}
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
portp->portidx;
- *bits |= portp->portbit;
+ writeb(readb(bits) | portp->portbit, bits);
set_bit(ST_TXBUSY, &portp->state);
EBRDDISABLE(brdp);
-
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
return(count);
}
static void stli_putchar(struct tty_struct *tty, unsigned char ch)
{
-#ifdef DEBUG
- printk("stli_putchar(tty=%x,ch=%x)\n", (int) tty, (int) ch);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
if (tty != stli_txcooktty) {
- if (stli_txcooktty != (struct tty_struct *) NULL)
+ if (stli_txcooktty != NULL)
stli_flushchars(stli_txcooktty);
stli_txcooktty = tty;
}
static void stli_flushchars(struct tty_struct *tty)
{
- volatile cdkhdr_t *hdrp;
- volatile unsigned char *bits;
- volatile cdkasy_t *ap;
- struct tty_struct *cooktty;
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned int len, stlen, head, tail, size, count, cooksize;
- unsigned char *buf, *shbuf;
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_flushchars(tty=%x)\n", (int) tty);
-#endif
+ cdkhdr_t __iomem *hdrp;
+ unsigned char __iomem *bits;
+ cdkasy_t __iomem *ap;
+ struct tty_struct *cooktty;
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned int len, stlen, head, tail, size, count, cooksize;
+ unsigned char *buf;
+ unsigned char __iomem *shbuf;
+ unsigned long flags;
cooksize = stli_txcooksize;
cooktty = stli_txcooktty;
stli_txcooksize = 0;
stli_txcookrealsize = 0;
- stli_txcooktty = (struct tty_struct *) NULL;
+ stli_txcooktty = NULL;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
- if (cooktty == (struct tty_struct *) NULL)
+ if (cooktty == NULL)
return;
if (tty != cooktty)
tty = cooktty;
return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- head = (unsigned int) ap->txq.head;
- tail = (unsigned int) ap->txq.tail;
- if (tail != ((unsigned int) ap->txq.tail))
- tail = (unsigned int) ap->txq.tail;
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
+ head = (unsigned int) readw(&ap->txq.head);
+ tail = (unsigned int) readw(&ap->txq.tail);
+ if (tail != ((unsigned int) readw(&ap->txq.tail)))
+ tail = (unsigned int) readw(&ap->txq.tail);
size = portp->txsize;
if (head >= tail) {
len = size - (head - tail) - 1;
while (len > 0) {
stlen = MIN(len, stlen);
- memcpy((shbuf + head), buf, stlen);
+ memcpy_toio(shbuf + head, buf, stlen);
buf += stlen;
len -= stlen;
count += stlen;
}
}
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- ap->txq.head = head;
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
+ writew(head, &ap->txq.head);
if (test_bit(ST_TXBUSY, &portp->state)) {
- if (ap->changed.data & DT_TXEMPTY)
- ap->changed.data &= ~DT_TXEMPTY;
+ if (readl(&ap->changed.data) & DT_TXEMPTY)
+ writel(readl(&ap->changed.data) & ~DT_TXEMPTY, &ap->changed.data);
}
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
portp->portidx;
- *bits |= portp->portbit;
+ writeb(readb(bits) | portp->portbit, bits);
set_bit(ST_TXBUSY, &portp->state);
EBRDDISABLE(brdp);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
static int stli_writeroom(struct tty_struct *tty)
{
- volatile cdkasyrq_t *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned int head, tail, len;
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_writeroom(tty=%x)\n", (int) tty);
-#endif
+ cdkasyrq_t __iomem *rp;
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned int head, tail, len;
+ unsigned long flags;
- if (tty == (struct tty_struct *) NULL)
- return(0);
if (tty == stli_txcooktty) {
if (stli_txcookrealsize != 0) {
len = stli_txcookrealsize - stli_txcooksize;
- return(len);
+ return len;
}
}
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return(0);
+ if (portp == NULL)
+ return 0;
if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
- head = (unsigned int) rp->head;
- tail = (unsigned int) rp->tail;
- if (tail != ((unsigned int) rp->tail))
- tail = (unsigned int) rp->tail;
+ rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
+ head = (unsigned int) readw(&rp->head);
+ tail = (unsigned int) readw(&rp->tail);
+ if (tail != ((unsigned int) readw(&rp->tail)))
+ tail = (unsigned int) readw(&rp->tail);
len = (head >= tail) ? (portp->txsize - (head - tail)) : (tail - head);
len--;
EBRDDISABLE(brdp);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
if (tty == stli_txcooktty) {
stli_txcookrealsize = len;
len -= stli_txcooksize;
}
- return(len);
+ return len;
}
/*****************************************************************************/
static int stli_charsinbuffer(struct tty_struct *tty)
{
- volatile cdkasyrq_t *rp;
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned int head, tail, len;
- unsigned long flags;
-
-#ifdef DEBUG
- printk("stli_charsinbuffer(tty=%x)\n", (int) tty);
-#endif
+ cdkasyrq_t __iomem *rp;
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned int head, tail, len;
+ unsigned long flags;
- if (tty == (struct tty_struct *) NULL)
- return(0);
if (tty == stli_txcooktty)
stli_flushchars(tty);
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return(0);
+ if (portp == NULL)
+ return 0;
if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
- head = (unsigned int) rp->head;
- tail = (unsigned int) rp->tail;
- if (tail != ((unsigned int) rp->tail))
- tail = (unsigned int) rp->tail;
+ rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->txq;
+ head = (unsigned int) readw(&rp->head);
+ tail = (unsigned int) readw(&rp->tail);
+ if (tail != ((unsigned int) readw(&rp->tail)))
+ tail = (unsigned int) readw(&rp->tail);
len = (head >= tail) ? (head - tail) : (portp->txsize - (tail - head));
if ((len == 0) && test_bit(ST_TXBUSY, &portp->state))
len = 1;
EBRDDISABLE(brdp);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
- return(len);
+ return len;
}
/*****************************************************************************/
static int stli_getserial(stliport_t *portp, struct serial_struct __user *sp)
{
- struct serial_struct sio;
- stlibrd_t *brdp;
-
-#ifdef DEBUG
- printk("stli_getserial(portp=%x,sp=%x)\n", (int) portp, (int) sp);
-#endif
+ struct serial_struct sio;
+ stlibrd_t *brdp;
memset(&sio, 0, sizeof(struct serial_struct));
sio.type = PORT_UNKNOWN;
sio.hub6 = 0;
brdp = stli_brds[portp->brdnr];
- if (brdp != (stlibrd_t *) NULL)
+ if (brdp != NULL)
sio.port = brdp->iobase;
return copy_to_user(sp, &sio, sizeof(struct serial_struct)) ?
static int stli_setserial(stliport_t *portp, struct serial_struct __user *sp)
{
- struct serial_struct sio;
- int rc;
-
-#ifdef DEBUG
- printk("stli_setserial(portp=%p,sp=%p)\n", portp, sp);
-#endif
+ struct serial_struct sio;
+ int rc;
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
(sio.close_delay != portp->close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
(portp->flags & ~ASYNC_USR_MASK)))
- return(-EPERM);
+ return -EPERM;
}
portp->flags = (portp->flags & ~ASYNC_USR_MASK) |
portp->custom_divisor = sio.custom_divisor;
if ((rc = stli_setport(portp)) < 0)
- return(rc);
- return(0);
+ return rc;
+ return 0;
}
/*****************************************************************************/
stlibrd_t *brdp;
int rc;
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ if (portp == NULL)
+ return -ENODEV;
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS,
&portp->asig, sizeof(asysigs_t), 1)) < 0)
- return(rc);
+ return rc;
return stli_mktiocm(portp->asig.sigvalue);
}
stlibrd_t *brdp;
int rts = -1, dtr = -1;
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ if (portp == NULL)
+ return -ENODEV;
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
if (set & TIOCM_RTS)
rts = 1;
static int stli_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned int ival;
- int rc;
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned int ival;
+ int rc;
void __user *argp = (void __user *)arg;
-#ifdef DEBUG
- printk("stli_ioctl(tty=%x,file=%x,cmd=%x,arg=%x)\n",
- (int) tty, (int) file, cmd, (int) arg);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return(-ENODEV);
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return(0);
+ if (portp == NULL)
+ return -ENODEV;
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
+ return 0;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(0);
+ if (brdp == NULL)
+ return 0;
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
(cmd != COM_GETPORTSTATS) && (cmd != COM_CLRPORTSTATS)) {
if (tty->flags & (1 << TTY_IO_ERROR))
- return(-EIO);
+ return -EIO;
}
rc = 0;
break;
}
- return(rc);
+ return rc;
}
/*****************************************************************************/
static void stli_settermios(struct tty_struct *tty, struct termios *old)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- struct termios *tiosp;
- asyport_t aport;
-
-#ifdef DEBUG
- printk("stli_settermios(tty=%x,old=%x)\n", (int) tty, (int) old);
-#endif
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ struct termios *tiosp;
+ asyport_t aport;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
tiosp = tty->termios;
static void stli_throttle(struct tty_struct *tty)
{
- stliport_t *portp;
-
-#ifdef DEBUG
- printk("stli_throttle(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ stliport_t *portp = tty->driver_data;
+ if (portp == NULL)
return;
-
set_bit(ST_RXSTOP, &portp->state);
}
static void stli_unthrottle(struct tty_struct *tty)
{
- stliport_t *portp;
-
-#ifdef DEBUG
- printk("stli_unthrottle(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ stliport_t *portp = tty->driver_data;
+ if (portp == NULL)
return;
-
clear_bit(ST_RXSTOP, &portp->state);
}
/*****************************************************************************/
/*
- * Stop the transmitter. Basically to do this we will just turn TX
- * interrupts off.
+ * Stop the transmitter.
*/
static void stli_stop(struct tty_struct *tty)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- asyctrl_t actrl;
-
-#ifdef DEBUG
- printk("stli_stop(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return;
-
- memset(&actrl, 0, sizeof(asyctrl_t));
- actrl.txctrl = CT_STOPFLOW;
-#if 0
- stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
-#endif
}
/*****************************************************************************/
/*
- * Start the transmitter again. Just turn TX interrupts back on.
+ * Start the transmitter again.
*/
static void stli_start(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- asyctrl_t actrl;
-
-#ifdef DEBUG
- printk("stli_start(tty=%x)\n", (int) tty);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
- portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
- return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
- return;
- brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return;
-
- memset(&actrl, 0, sizeof(asyctrl_t));
- actrl.txctrl = CT_STARTFLOW;
-#if 0
- stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
-#endif
}
/*****************************************************************************/
static void stli_dohangup(void *arg)
{
- stliport_t *portp;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_dohangup(portp=%x)\n", (int) arg);
-#endif
-
- /*
- * FIXME: There's a module removal race here: tty_hangup
- * calls schedule_work which will call into this
- * driver later.
- */
- portp = (stliport_t *) arg;
- if (portp != (stliport_t *) NULL) {
- if (portp->tty != (struct tty_struct *) NULL) {
- tty_hangup(portp->tty);
- }
+ stliport_t *portp = (stliport_t *) arg;
+ if (portp->tty != NULL) {
+ tty_hangup(portp->tty);
}
}
static void stli_hangup(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned long flags;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_hangup(tty=%x)\n", (int) tty);
-#endif
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned long flags;
- if (tty == (struct tty_struct *) NULL)
- return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
portp->flags &= ~ASYNC_INITIALIZED;
- save_flags(flags);
- cli();
- if (! test_bit(ST_CLOSING, &portp->state))
+ if (!test_bit(ST_CLOSING, &portp->state))
stli_rawclose(brdp, portp, 0, 0);
+
+ spin_lock_irqsave(&stli_lock, flags);
if (tty->termios->c_cflag & HUPCL) {
stli_mkasysigs(&portp->asig, 0, 0);
if (test_bit(ST_CMDING, &portp->state)) {
&portp->asig, sizeof(asysigs_t), 0);
}
}
- restore_flags(flags);
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- portp->tty = (struct tty_struct *) NULL;
+ portp->tty = NULL;
portp->flags &= ~ASYNC_NORMAL_ACTIVE;
portp->refcount = 0;
+ spin_unlock_irqrestore(&stli_lock, flags);
+
wake_up_interruptible(&portp->open_wait);
}
static void stli_flushbuffer(struct tty_struct *tty)
{
- stliport_t *portp;
- stlibrd_t *brdp;
- unsigned long ftype, flags;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_flushbuffer(tty=%x)\n", (int) tty);
-#endif
+ stliport_t *portp;
+ stlibrd_t *brdp;
+ unsigned long ftype, flags;
- if (tty == (struct tty_struct *) NULL)
- return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
if (tty == stli_txcooktty) {
- stli_txcooktty = (struct tty_struct *) NULL;
+ stli_txcooktty = NULL;
stli_txcooksize = 0;
stli_txcookrealsize = 0;
}
ftype |= FLUSHRX;
clear_bit(ST_DOFLUSHRX, &portp->state);
}
- stli_sendcmd(brdp, portp, A_FLUSH, &ftype,
- sizeof(unsigned long), 0);
+ __stli_sendcmd(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0);
}
- restore_flags(flags);
-
- wake_up_interruptible(&tty->write_wait);
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup)
- (tty->ldisc.write_wakeup)(tty);
+ spin_unlock_irqrestore(&brd_lock, flags);
+ tty_wakeup(tty);
}
/*****************************************************************************/
stlibrd_t *brdp;
stliport_t *portp;
long arg;
- /* long savestate, savetime; */
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_breakctl(tty=%x,state=%d)\n", (int) tty, state);
-#endif
- if (tty == (struct tty_struct *) NULL)
- return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
-/*
- * Due to a bug in the tty send_break() code we need to preserve
- * the current process state and timeout...
- savetime = current->timeout;
- savestate = current->state;
- */
-
arg = (state == -1) ? BREAKON : BREAKOFF;
stli_cmdwait(brdp, portp, A_BREAK, &arg, sizeof(long), 0);
-
-/*
- *
- current->timeout = savetime;
- current->state = savestate;
- */
}
/*****************************************************************************/
static void stli_waituntilsent(struct tty_struct *tty, int timeout)
{
- stliport_t *portp;
- unsigned long tend;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_waituntilsent(tty=%x,timeout=%x)\n", (int) tty, timeout);
-#endif
+ stliport_t *portp;
+ unsigned long tend;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
if (timeout == 0)
stliport_t *portp;
asyctrl_t actrl;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_sendxchar(tty=%x,ch=%x)\n", (int) tty, ch);
-#endif
-
- if (tty == (struct tty_struct *) NULL)
- return;
portp = tty->driver_data;
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
return;
- if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+ if (portp->brdnr < 0 || portp->brdnr >= stli_nrbrds)
return;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
return;
memset(&actrl, 0, sizeof(asyctrl_t));
actrl.txctrl = CT_SENDCHR;
actrl.tximdch = ch;
}
-
stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
}
static int stli_portinfo(stlibrd_t *brdp, stliport_t *portp, int portnr, char *pos)
{
- char *sp, *uart;
- int rc, cnt;
+ char *sp, *uart;
+ int rc, cnt;
rc = stli_portcmdstats(portp);
uart = "UNKNOWN";
if (brdp->state & BST_STARTED) {
switch (stli_comstats.hwid) {
- case 0: uart = "2681"; break;
- case 1: uart = "SC26198"; break;
- default: uart = "CD1400"; break;
+ case 0: uart = "2681"; break;
+ case 1: uart = "SC26198"; break;
+ default:uart = "CD1400"; break;
}
}
static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
{
- stlibrd_t *brdp;
- stliport_t *portp;
- int brdnr, portnr, totalport;
- int curoff, maxoff;
- char *pos;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_readproc(page=%x,start=%x,off=%x,count=%d,eof=%x,"
- "data=%x\n", (int) page, (int) start, (int) off, count,
- (int) eof, (int) data);
-#endif
+ stlibrd_t *brdp;
+ stliport_t *portp;
+ int brdnr, portnr, totalport;
+ int curoff, maxoff;
+ char *pos;
pos = page;
totalport = 0;
*/
for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
continue;
if (brdp->state == 0)
continue;
for (portnr = 0; (portnr < brdp->nrports); portnr++,
totalport++) {
portp = brdp->ports[portnr];
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
continue;
if (off >= (curoff += MAXLINE))
continue;
* a poll routine that does not have user context. Therefore you cannot
* copy back directly into user space, or to the kernel stack of a
* process. This routine does not sleep, so can be called from anywhere.
+ *
+ * The caller must hold the brd_lock (see also stli_sendcmd the usual
+ * entry point)
*/
-static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+static void __stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
{
- volatile cdkhdr_t *hdrp;
- volatile cdkctrl_t *cp;
- volatile unsigned char *bits;
- unsigned long flags;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_sendcmd(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,"
- "copyback=%d)\n", (int) brdp, (int) portp, (int) cmd,
- (int) arg, size, copyback);
-#endif
+ cdkhdr_t __iomem *hdrp;
+ cdkctrl_t __iomem *cp;
+ unsigned char __iomem *bits;
+ unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&brd_lock, flags);
if (test_bit(ST_CMDING, &portp->state)) {
printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n",
(int) cmd);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
return;
}
EBRDENABLE(brdp);
- cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+ cp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
if (size > 0) {
- memcpy((void *) &(cp->args[0]), arg, size);
+ memcpy_toio((void __iomem *) &(cp->args[0]), arg, size);
if (copyback) {
portp->argp = arg;
portp->argsize = size;
}
}
- cp->status = 0;
- cp->cmd = cmd;
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+ writel(0, &cp->status);
+ writel(cmd, &cp->cmd);
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ bits = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset +
portp->portidx;
- *bits |= portp->portbit;
+ writeb(readb(bits) | portp->portbit, bits);
set_bit(ST_CMDING, &portp->state);
EBRDDISABLE(brdp);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
+}
+
+static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&brd_lock, flags);
+ __stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
+ spin_unlock_irqrestore(&brd_lock, flags);
}
/*****************************************************************************/
static void stli_read(stlibrd_t *brdp, stliport_t *portp)
{
- volatile cdkasyrq_t *rp;
- volatile char *shbuf;
+ cdkasyrq_t __iomem *rp;
+ char __iomem *shbuf;
struct tty_struct *tty;
- unsigned int head, tail, size;
- unsigned int len, stlen;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_read(brdp=%x,portp=%d)\n",
- (int) brdp, (int) portp);
-#endif
+ unsigned int head, tail, size;
+ unsigned int len, stlen;
if (test_bit(ST_RXSTOP, &portp->state))
return;
tty = portp->tty;
- if (tty == (struct tty_struct *) NULL)
+ if (tty == NULL)
return;
- rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
- head = (unsigned int) rp->head;
- if (head != ((unsigned int) rp->head))
- head = (unsigned int) rp->head;
- tail = (unsigned int) rp->tail;
+ rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
+ head = (unsigned int) readw(&rp->head);
+ if (head != ((unsigned int) readw(&rp->head)))
+ head = (unsigned int) readw(&rp->head);
+ tail = (unsigned int) readw(&rp->tail);
size = portp->rxsize;
if (head >= tail) {
len = head - tail;
stlen = size - tail;
}
- len = MIN(len, (TTY_FLIPBUF_SIZE - tty->flip.count));
- shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset);
+ len = tty_buffer_request_room(tty, len);
+
+ shbuf = (char __iomem *) EBRDGETMEMPTR(brdp, portp->rxoffset);
while (len > 0) {
- stlen = MIN(len, stlen);
- memcpy(tty->flip.char_buf_ptr, (char *) (shbuf + tail), stlen);
- memset(tty->flip.flag_buf_ptr, 0, stlen);
- tty->flip.char_buf_ptr += stlen;
- tty->flip.flag_buf_ptr += stlen;
- tty->flip.count += stlen;
+ unsigned char *cptr;
+ stlen = MIN(len, stlen);
+ tty_prepare_flip_string(tty, &cptr, stlen);
+ memcpy_fromio(cptr, shbuf + tail, stlen);
len -= stlen;
tail += stlen;
if (tail >= size) {
stlen = head;
}
}
- rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
- rp->tail = tail;
+ rp = &((cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
+ writew(tail, &rp->tail);
if (head != tail)
set_bit(ST_RXING, &portp->state);
* difficult to deal with them here.
*/
-static void stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp)
+static void stli_dodelaycmd(stliport_t *portp, cdkctrl_t __iomem *cp)
{
- int cmd;
+ int cmd;
if (test_bit(ST_DOSIGS, &portp->state)) {
if (test_bit(ST_DOFLUSHTX, &portp->state) &&
clear_bit(ST_DOFLUSHTX, &portp->state);
clear_bit(ST_DOFLUSHRX, &portp->state);
clear_bit(ST_DOSIGS, &portp->state);
- memcpy((void *) &(cp->args[0]), (void *) &portp->asig,
+ memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &portp->asig,
sizeof(asysigs_t));
- cp->status = 0;
- cp->cmd = cmd;
+ writel(0, &cp->status);
+ writel(cmd, &cp->cmd);
set_bit(ST_CMDING, &portp->state);
} else if (test_bit(ST_DOFLUSHTX, &portp->state) ||
test_bit(ST_DOFLUSHRX, &portp->state)) {
cmd |= ((test_bit(ST_DOFLUSHRX, &portp->state)) ? FLUSHRX : 0);
clear_bit(ST_DOFLUSHTX, &portp->state);
clear_bit(ST_DOFLUSHRX, &portp->state);
- memcpy((void *) &(cp->args[0]), (void *) &cmd, sizeof(int));
- cp->status = 0;
- cp->cmd = A_FLUSH;
+ memcpy_toio((void __iomem *) &(cp->args[0]), (void *) &cmd, sizeof(int));
+ writel(0, &cp->status);
+ writel(A_FLUSH, &cp->cmd);
set_bit(ST_CMDING, &portp->state);
}
}
static int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp)
{
- volatile cdkasy_t *ap;
- volatile cdkctrl_t *cp;
- struct tty_struct *tty;
- asynotify_t nt;
- unsigned long oldsigs;
- int rc, donerx;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_hostcmd(brdp=%x,channr=%d)\n",
- (int) brdp, channr);
-#endif
-
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
+ cdkasy_t __iomem *ap;
+ cdkctrl_t __iomem *cp;
+ struct tty_struct *tty;
+ asynotify_t nt;
+ unsigned long oldsigs;
+ int rc, donerx;
+
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
cp = &ap->ctrl;
/*
* Check if we are waiting for an open completion message.
*/
if (test_bit(ST_OPENING, &portp->state)) {
- rc = (int) cp->openarg;
- if ((cp->open == 0) && (rc != 0)) {
+ rc = readl(&cp->openarg);
+ if (readb(&cp->open) == 0 && rc != 0) {
if (rc > 0)
rc--;
- cp->openarg = 0;
+ writel(0, &cp->openarg);
portp->rc = rc;
clear_bit(ST_OPENING, &portp->state);
wake_up_interruptible(&portp->raw_wait);
* Check if we are waiting for a close completion message.
*/
if (test_bit(ST_CLOSING, &portp->state)) {
- rc = (int) cp->closearg;
- if ((cp->close == 0) && (rc != 0)) {
+ rc = (int) readl(&cp->closearg);
+ if (readb(&cp->close) == 0 && rc != 0) {
if (rc > 0)
rc--;
- cp->closearg = 0;
+ writel(0, &cp->closearg);
portp->rc = rc;
clear_bit(ST_CLOSING, &portp->state);
wake_up_interruptible(&portp->raw_wait);
* need to copy out the command results associated with this command.
*/
if (test_bit(ST_CMDING, &portp->state)) {
- rc = cp->status;
- if ((cp->cmd == 0) && (rc != 0)) {
+ rc = readl(&cp->status);
+ if (readl(&cp->cmd) == 0 && rc != 0) {
if (rc > 0)
rc--;
- if (portp->argp != (void *) NULL) {
- memcpy(portp->argp, (void *) &(cp->args[0]),
+ if (portp->argp != NULL) {
+ memcpy_fromio(portp->argp, (void __iomem *) &(cp->args[0]),
portp->argsize);
- portp->argp = (void *) NULL;
+ portp->argp = NULL;
}
- cp->status = 0;
+ writel(0, &cp->status);
portp->rc = rc;
clear_bit(ST_CMDING, &portp->state);
stli_dodelaycmd(portp, cp);
if (nt.data & DT_TXEMPTY)
clear_bit(ST_TXBUSY, &portp->state);
if (nt.data & (DT_TXEMPTY | DT_TXLOW)) {
- if (tty != (struct tty_struct *) NULL) {
- if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
- tty->ldisc.write_wakeup) {
- (tty->ldisc.write_wakeup)(tty);
- EBRDENABLE(brdp);
- }
+ if (tty != NULL) {
+ tty_wakeup(tty);
+ EBRDENABLE(brdp);
wake_up_interruptible(&tty->write_wait);
}
}
if ((nt.data & DT_RXBREAK) && (portp->rxmarkmsk & BRKINT)) {
- if (tty != (struct tty_struct *) NULL) {
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
- *tty->flip.char_buf_ptr++ = 0;
- if (portp->flags & ASYNC_SAK) {
- do_SAK(tty);
- EBRDENABLE(brdp);
- }
- tty_schedule_flip(tty);
+ if (tty != NULL) {
+ tty_insert_flip_char(tty, 0, TTY_BREAK);
+ if (portp->flags & ASYNC_SAK) {
+ do_SAK(tty);
+ EBRDENABLE(brdp);
}
+ tty_schedule_flip(tty);
}
}
* at the cdk header structure.
*/
-static void stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp)
+static void stli_brdpoll(stlibrd_t *brdp, cdkhdr_t __iomem *hdrp)
{
- stliport_t *portp;
- unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
- unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
- unsigned char *slavep;
- int bitpos, bitat, bitsize;
- int channr, nrdevs, slavebitchange;
+ stliport_t *portp;
+ unsigned char hostbits[(STL_MAXCHANS / 8) + 1];
+ unsigned char slavebits[(STL_MAXCHANS / 8) + 1];
+ unsigned char __iomem *slavep;
+ int bitpos, bitat, bitsize;
+ int channr, nrdevs, slavebitchange;
bitsize = brdp->bitsize;
nrdevs = brdp->nrdevs;
* 8 service bits at a time in the inner loop, so we can bypass
* the lot if none of them want service.
*/
- memcpy(&hostbits[0], (((unsigned char *) hdrp) + brdp->hostoffset),
+ memcpy_fromio(&hostbits[0], (((unsigned char __iomem *) hdrp) + brdp->hostoffset),
bitsize);
memset(&slavebits[0], 0, bitsize);
* service may initiate more slave requests.
*/
if (slavebitchange) {
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- slavep = ((unsigned char *) hdrp) + brdp->slaveoffset;
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ slavep = ((unsigned char __iomem *) hdrp) + brdp->slaveoffset;
for (bitpos = 0; (bitpos < bitsize); bitpos++) {
- if (slavebits[bitpos])
- slavep[bitpos] &= ~slavebits[bitpos];
+ if (readb(slavebits + bitpos))
+ writeb(readb(slavep + bitpos) & ~slavebits[bitpos], slavebits + bitpos);
}
}
}
static void stli_poll(unsigned long arg)
{
- volatile cdkhdr_t *hdrp;
- stlibrd_t *brdp;
- int brdnr;
+ cdkhdr_t __iomem *hdrp;
+ stlibrd_t *brdp;
+ int brdnr;
stli_timerlist.expires = STLI_TIMEOUT;
add_timer(&stli_timerlist);
*/
for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
continue;
if ((brdp->state & BST_STARTED) == 0)
continue;
+ spin_lock(&brd_lock);
EBRDENABLE(brdp);
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
- if (hdrp->hostreq)
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ if (readb(&hdrp->hostreq))
stli_brdpoll(brdp, hdrp);
EBRDDISABLE(brdp);
+ spin_unlock(&brd_lock);
}
}
static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_mkasyport(portp=%x,pp=%x,tiosp=%d)\n",
- (int) portp, (int) pp, (int) tiosp);
-#endif
-
memset(pp, 0, sizeof(asyport_t));
/*
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_mkasysigs(sp=%x,dtr=%d,rts=%d)\n",
- (int) sp, dtr, rts);
-#endif
-
memset(sp, 0, sizeof(asysigs_t));
if (dtr >= 0) {
sp->signal |= SG_DTR;
static long stli_mktiocm(unsigned long sigvalue)
{
- long tiocm;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_mktiocm(sigvalue=%x)\n", (int) sigvalue);
-#endif
-
- tiocm = 0;
+ long tiocm = 0;
tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0);
tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0);
tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0);
stliport_t *portp;
int i, panelnr, panelport;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_initports(brdp=%x)\n", (int) brdp);
-#endif
-
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
- portp = (stliport_t *) stli_memalloc(sizeof(stliport_t));
- if (portp == (stliport_t *) NULL) {
+ portp = kzalloc(sizeof(stliport_t), GFP_KERNEL);
+ if (!portp) {
printk("STALLION: failed to allocate port structure\n");
continue;
}
- memset(portp, 0, sizeof(stliport_t));
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
brdp->ports[i] = portp;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
{
unsigned long memconf;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpinit(brdp=%d)\n", (int) brdp);
-#endif
-
outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
udelay(10);
outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
static void stli_ecpenable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpenable(brdp=%x)\n", (int) brdp);
-#endif
outb(ECP_ATENABLE, (brdp->iobase + ECP_ATCONFR));
}
static void stli_ecpdisable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpdisable(brdp=%x)\n", (int) brdp);
-#endif
outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
}
static char *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
{
- void *ptr;
- unsigned char val;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
- (int) offset);
-#endif
+ void *ptr;
+ unsigned char val;
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
static void stli_ecpreset(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpreset(brdp=%x)\n", (int) brdp);
-#endif
-
outb(ECP_ATSTOP, (brdp->iobase + ECP_ATCONFR));
udelay(10);
outb(ECP_ATDISABLE, (brdp->iobase + ECP_ATCONFR));
static void stli_ecpintr(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpintr(brdp=%x)\n", (int) brdp);
-#endif
outb(0x1, brdp->iobase);
}
{
unsigned long memconf;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpeiinit(brdp=%x)\n", (int) brdp);
-#endif
-
outb(0x1, (brdp->iobase + ECP_EIBRDENAB));
outb(ECP_EISTOP, (brdp->iobase + ECP_EICONFR));
udelay(10);
void *ptr;
unsigned char val;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecpeigetmemptr(brdp=%x,offset=%x,line=%d)\n",
- (int) brdp, (int) offset, line);
-#endif
-
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
static char *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
{
- void *ptr;
- unsigned char val;
+ void *ptr;
+ unsigned char val;
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
static void stli_ecppciinit(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecppciinit(brdp=%x)\n", (int) brdp);
-#endif
-
outb(ECP_PCISTOP, (brdp->iobase + ECP_PCICONFR));
udelay(10);
outb(0, (brdp->iobase + ECP_PCICONFR));
void *ptr;
unsigned char val;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_ecppcigetmemptr(brdp=%x,offset=%x,line=%d)\n",
- (int) brdp, (int) offset, line);
-#endif
-
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
"range at line=%d(%d), board=%d\n",
{
unsigned long memconf;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbinit(brdp=%d)\n", (int) brdp);
-#endif
-
outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
udelay(10);
outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
static void stli_onbenable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbenable(brdp=%x)\n", (int) brdp);
-#endif
outb((brdp->enabval | ONB_ATENABLE), (brdp->iobase + ONB_ATCONFR));
}
static void stli_onbdisable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbdisable(brdp=%x)\n", (int) brdp);
-#endif
outb((brdp->enabval | ONB_ATDISABLE), (brdp->iobase + ONB_ATCONFR));
}
{
void *ptr;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
- (int) offset);
-#endif
-
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
static void stli_onbreset(stlibrd_t *brdp)
{
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbreset(brdp=%x)\n", (int) brdp);
-#endif
-
outb(ONB_ATSTOP, (brdp->iobase + ONB_ATCONFR));
udelay(10);
outb(ONB_ATDISABLE, (brdp->iobase + ONB_ATCONFR));
{
unsigned long memconf;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbeinit(brdp=%d)\n", (int) brdp);
-#endif
-
outb(0x1, (brdp->iobase + ONB_EIBRDENAB));
outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
udelay(10);
static void stli_onbeenable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbeenable(brdp=%x)\n", (int) brdp);
-#endif
outb(ONB_EIENABLE, (brdp->iobase + ONB_EICONFR));
}
static void stli_onbedisable(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbedisable(brdp=%x)\n", (int) brdp);
-#endif
outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
}
static char *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
{
- void *ptr;
- unsigned char val;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_onbegetmemptr(brdp=%x,offset=%x,line=%d)\n",
- (int) brdp, (int) offset, line);
-#endif
+ void *ptr;
+ unsigned char val;
if (offset > brdp->memsize) {
printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
static void stli_onbereset(stlibrd_t *brdp)
{
-
-#ifdef DEBUG
- printk(KERN_ERR "stli_onbereset(brdp=%x)\n", (int) brdp);
-#endif
-
outb(ONB_EISTOP, (brdp->iobase + ONB_EICONFR));
udelay(10);
outb(ONB_EIDISABLE, (brdp->iobase + ONB_EICONFR));
static void stli_bbyinit(stlibrd_t *brdp)
{
-
-#ifdef DEBUG
- printk(KERN_ERR "stli_bbyinit(brdp=%d)\n", (int) brdp);
-#endif
-
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
outb(0, (brdp->iobase + BBY_ATCONFR));
static char *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
{
- void *ptr;
- unsigned char val;
+ void *ptr;
+ unsigned char val;
-#ifdef DEBUG
- printk(KERN_ERR "stli_bbygetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
- (int) offset);
-#endif
+ BUG_ON(offset > brdp->memsize);
- if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- val = 0;
- } else {
- ptr = brdp->membase + (offset % BBY_PAGESIZE);
- val = (unsigned char) (offset / BBY_PAGESIZE);
- }
+ ptr = brdp->membase + (offset % BBY_PAGESIZE);
+ val = (unsigned char) (offset / BBY_PAGESIZE);
outb(val, (brdp->iobase + BBY_ATCONFR));
return(ptr);
}
static void stli_bbyreset(stlibrd_t *brdp)
{
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_bbyreset(brdp=%x)\n", (int) brdp);
-#endif
-
outb(BBY_ATSTOP, (brdp->iobase + BBY_ATCONFR));
udelay(10);
outb(0, (brdp->iobase + BBY_ATCONFR));
static void stli_stalinit(stlibrd_t *brdp)
{
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_stalinit(brdp=%d)\n", (int) brdp);
-#endif
-
outb(0x1, brdp->iobase);
mdelay(1000);
}
static char *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
{
- void *ptr;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_stalgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
- (int) offset);
-#endif
-
- if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
- "range at line=%d(%d), brd=%d\n",
- (int) offset, line, __LINE__, brdp->brdnr);
- ptr = NULL;
- } else {
- ptr = brdp->membase + (offset % STAL_PAGESIZE);
- }
- return(ptr);
+ BUG_ON(offset > brdp->memsize);
+ return brdp->membase + (offset % STAL_PAGESIZE);
}
/*****************************************************************************/
static void stli_stalreset(stlibrd_t *brdp)
{
- volatile unsigned long *vecp;
+ u32 __iomem *vecp;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_stalreset(brdp=%x)\n", (int) brdp);
-#endif
-
- vecp = (volatile unsigned long *) (brdp->membase + 0x30);
- *vecp = 0xffff0000;
+ vecp = (u32 __iomem *) (brdp->membase + 0x30);
+ writel(0xffff0000, vecp);
outb(0, brdp->iobase);
mdelay(1000);
}
static int stli_initecp(stlibrd_t *brdp)
{
- cdkecpsig_t sig;
- cdkecpsig_t *sigsp;
- unsigned int status, nxtid;
- char *name;
- int panelnr, nrports;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_initecp(brdp=%x)\n", (int) brdp);
-#endif
+ cdkecpsig_t sig;
+ cdkecpsig_t __iomem *sigsp;
+ unsigned int status, nxtid;
+ char *name;
+ int panelnr, nrports;
if (!request_region(brdp->iobase, brdp->iosize, "istallion"))
return -EIO;
if ((brdp->iobase == 0) || (brdp->memaddr == 0))
{
release_region(brdp->iobase, brdp->iosize);
- return(-ENODEV);
+ return -ENODEV;
}
brdp->iosize = ECP_IOSIZE;
default:
release_region(brdp->iobase, brdp->iosize);
- return(-EINVAL);
+ return -EINVAL;
}
/*
EBRDINIT(brdp);
brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
- if (brdp->membase == (void *) NULL)
+ if (brdp->membase == NULL)
{
release_region(brdp->iobase, brdp->iosize);
- return(-ENOMEM);
+ return -ENOMEM;
}
/*
* this is, and what it is connected to it.
*/
EBRDENABLE(brdp);
- sigsp = (cdkecpsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
+ sigsp = (cdkecpsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
memcpy(&sig, sigsp, sizeof(cdkecpsig_t));
EBRDDISABLE(brdp);
-#if 0
- printk("%s(%d): sig-> magic=%x rom=%x panel=%x,%x,%x,%x,%x,%x,%x,%x\n",
- __FILE__, __LINE__, (int) sig.magic, sig.romver, sig.panelid[0],
- (int) sig.panelid[1], (int) sig.panelid[2],
- (int) sig.panelid[3], (int) sig.panelid[4],
- (int) sig.panelid[5], (int) sig.panelid[6],
- (int) sig.panelid[7]);
-#endif
-
- if (sig.magic != ECP_MAGIC)
+ if (sig.magic != cpu_to_le32(ECP_MAGIC))
{
release_region(brdp->iobase, brdp->iosize);
- return(-ENODEV);
+ return -ENODEV;
}
/*
brdp->state |= BST_FOUND;
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_initonb(stlibrd_t *brdp)
{
- cdkonbsig_t sig;
- cdkonbsig_t *sigsp;
- char *name;
- int i;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_initonb(brdp=%x)\n", (int) brdp);
-#endif
+ cdkonbsig_t sig;
+ cdkonbsig_t __iomem *sigsp;
+ char *name;
+ int i;
/*
* Do a basic sanity check on the IO and memory addresses.
*/
- if ((brdp->iobase == 0) || (brdp->memaddr == 0))
- return(-ENODEV);
+ if (brdp->iobase == 0 || brdp->memaddr == 0)
+ return -ENODEV;
brdp->iosize = ONB_IOSIZE;
case BRD_ONBOARD2:
case BRD_ONBOARD2_32:
case BRD_ONBOARDRS:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ONB_MEMSIZE;
brdp->pagesize = ONB_ATPAGESIZE;
brdp->init = stli_onbinit;
break;
case BRD_ONBOARDE:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = ONB_EIMEMSIZE;
brdp->pagesize = ONB_EIPAGESIZE;
brdp->init = stli_onbeinit;
case BRD_BRUMBY4:
case BRD_BRUMBY8:
case BRD_BRUMBY16:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = BBY_MEMSIZE;
brdp->pagesize = BBY_PAGESIZE;
brdp->init = stli_bbyinit;
break;
case BRD_STALLION:
- brdp->membase = (void *) brdp->memaddr;
brdp->memsize = STAL_MEMSIZE;
brdp->pagesize = STAL_PAGESIZE;
brdp->init = stli_stalinit;
default:
release_region(brdp->iobase, brdp->iosize);
- return(-EINVAL);
+ return -EINVAL;
}
/*
EBRDINIT(brdp);
brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
- if (brdp->membase == (void *) NULL)
+ if (brdp->membase == NULL)
{
release_region(brdp->iobase, brdp->iosize);
- return(-ENOMEM);
+ return -ENOMEM;
}
/*
* this is, and how many ports.
*/
EBRDENABLE(brdp);
- sigsp = (cdkonbsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
- memcpy(&sig, sigsp, sizeof(cdkonbsig_t));
+ sigsp = (cdkonbsig_t __iomem *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
+ memcpy_fromio(&sig, sigsp, sizeof(cdkonbsig_t));
EBRDDISABLE(brdp);
-#if 0
- printk("%s(%d): sig-> magic=%x:%x:%x:%x romver=%x amask=%x:%x:%x\n",
- __FILE__, __LINE__, sig.magic0, sig.magic1, sig.magic2,
- sig.magic3, sig.romver, sig.amask0, sig.amask1, sig.amask2);
-#endif
-
- if ((sig.magic0 != ONB_MAGIC0) || (sig.magic1 != ONB_MAGIC1) ||
- (sig.magic2 != ONB_MAGIC2) || (sig.magic3 != ONB_MAGIC3))
+ if (sig.magic0 != cpu_to_le16(ONB_MAGIC0) ||
+ sig.magic1 != cpu_to_le16(ONB_MAGIC1) ||
+ sig.magic2 != cpu_to_le16(ONB_MAGIC2) ||
+ sig.magic3 != cpu_to_le16(ONB_MAGIC3))
{
release_region(brdp->iobase, brdp->iosize);
- return(-ENODEV);
+ return -ENODEV;
}
/*
brdp->state |= BST_FOUND;
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_startbrd(stlibrd_t *brdp)
{
- volatile cdkhdr_t *hdrp;
- volatile cdkmem_t *memp;
- volatile cdkasy_t *ap;
- unsigned long flags;
- stliport_t *portp;
- int portnr, nrdevs, i, rc;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_startbrd(brdp=%x)\n", (int) brdp);
-#endif
-
- rc = 0;
-
- save_flags(flags);
- cli();
+ cdkhdr_t __iomem *hdrp;
+ cdkmem_t __iomem *memp;
+ cdkasy_t __iomem *ap;
+ unsigned long flags;
+ stliport_t *portp;
+ int portnr, nrdevs, i, rc = 0;
+ u32 memoff;
+
+ spin_lock_irqsave(&brd_lock, flags);
EBRDENABLE(brdp);
- hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+ hdrp = (cdkhdr_t __iomem *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
nrdevs = hdrp->nrdevs;
#if 0
printk("%s(%d): CDK version %d.%d.%d --> "
"nrdevs=%d memp=%x hostp=%x slavep=%x\n",
- __FILE__, __LINE__, hdrp->ver_release, hdrp->ver_modification,
- hdrp->ver_fix, nrdevs, (int) hdrp->memp, (int) hdrp->hostp,
- (int) hdrp->slavep);
+ __FILE__, __LINE__, readb(&hdrp->ver_release), readb(&hdrp->ver_modification),
+ readb(&hdrp->ver_fix), nrdevs, (int) readl(&hdrp->memp), readl(&hdrp->hostp),
+ readl(&hdrp->slavep));
#endif
if (nrdevs < (brdp->nrports + 1)) {
brdp->hostoffset = hdrp->hostp - CDK_CDKADDR;
brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR;
brdp->bitsize = (nrdevs + 7) / 8;
- memp = (volatile cdkmem_t *) hdrp->memp;
- if (((unsigned long) memp) > brdp->memsize) {
+ memoff = readl(&hdrp->memp);
+ if (memoff > brdp->memsize) {
printk(KERN_ERR "STALLION: corrupted shared memory region?\n");
rc = -EIO;
goto stli_donestartup;
}
- memp = (volatile cdkmem_t *) EBRDGETMEMPTR(brdp, (unsigned long) memp);
- if (memp->dtype != TYP_ASYNCTRL) {
+ memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
+ if (readw(&memp->dtype) != TYP_ASYNCTRL) {
printk(KERN_ERR "STALLION: no slave control device found\n");
goto stli_donestartup;
}
* change pages while reading memory map.
*/
for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) {
- if (memp->dtype != TYP_ASYNC)
+ if (readw(&memp->dtype) != TYP_ASYNC)
break;
portp = brdp->ports[portnr];
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
break;
portp->devnr = i;
- portp->addr = memp->offset;
+ portp->addr = readl(&memp->offset);
portp->reqbit = (unsigned char) (0x1 << (i * 8 / nrdevs));
portp->portidx = (unsigned char) (i / 8);
portp->portbit = (unsigned char) (0x1 << (i % 8));
}
- hdrp->slavereq = 0xff;
+ writeb(0xff, &hdrp->slavereq);
/*
* For each port setup a local copy of the RX and TX buffer offsets
*/
for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) {
portp = brdp->ports[portnr];
- if (portp == (stliport_t *) NULL)
+ if (portp == NULL)
break;
if (portp->addr == 0)
break;
- ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
- if (ap != (volatile cdkasy_t *) NULL) {
- portp->rxsize = ap->rxq.size;
- portp->txsize = ap->txq.size;
- portp->rxoffset = ap->rxq.offset;
- portp->txoffset = ap->txq.offset;
+ ap = (cdkasy_t __iomem *) EBRDGETMEMPTR(brdp, portp->addr);
+ if (ap != NULL) {
+ portp->rxsize = readw(&ap->rxq.size);
+ portp->txsize = readw(&ap->txq.size);
+ portp->rxoffset = readl(&ap->rxq.offset);
+ portp->txoffset = readl(&ap->txq.offset);
}
}
stli_donestartup:
EBRDDISABLE(brdp);
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
if (rc == 0)
brdp->state |= BST_STARTED;
add_timer(&stli_timerlist);
}
- return(rc);
+ return rc;
}
/*****************************************************************************/
static int __init stli_brdinit(stlibrd_t *brdp)
{
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_brdinit(brdp=%x)\n", (int) brdp);
-#endif
-
stli_brds[brdp->brdnr] = brdp;
switch (brdp->brdtype) {
case BRD_ECHPCI:
printk(KERN_ERR "STALLION: %s board type not supported in "
"this driver\n", stli_brdnames[brdp->brdtype]);
- return(ENODEV);
+ return -ENODEV;
default:
printk(KERN_ERR "STALLION: board=%d is unknown board "
"type=%d\n", brdp->brdnr, brdp->brdtype);
- return(ENODEV);
+ return -ENODEV;
}
if ((brdp->state & BST_FOUND) == 0) {
"io=%x mem=%x\n",
stli_brdnames[brdp->brdtype], brdp->brdnr,
brdp->iobase, (int) brdp->memaddr);
- return(ENODEV);
+ return -ENODEV;
}
stli_initports(brdp);
"nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
brdp->nrpanels, brdp->nrports);
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_eisamemprobe(stlibrd_t *brdp)
{
- cdkecpsig_t ecpsig, *ecpsigp;
- cdkonbsig_t onbsig, *onbsigp;
+ cdkecpsig_t ecpsig, __iomem *ecpsigp;
+ cdkonbsig_t onbsig, __iomem *onbsigp;
int i, foundit;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_eisamemprobe(brdp=%x)\n", (int) brdp);
-#endif
-
/*
* First up we reset the board, to get it into a known state. There
* is only 2 board types here we need to worry about. Don;t use the
mdelay(1);
stli_onbeenable(brdp);
} else {
- return(-ENODEV);
+ return -ENODEV;
}
foundit = 0;
*/
for (i = 0; (i < stli_eisamempsize); i++) {
brdp->memaddr = stli_eisamemprobeaddrs[i];
- brdp->membase = (void *) brdp->memaddr;
brdp->membase = ioremap(brdp->memaddr, brdp->memsize);
- if (brdp->membase == (void *) NULL)
+ if (brdp->membase == NULL)
continue;
if (brdp->brdtype == BRD_ECPE) {
- ecpsigp = (cdkecpsig_t *) stli_ecpeigetmemptr(brdp,
+ ecpsigp = (cdkecpsig_t __iomem *) stli_ecpeigetmemptr(brdp,
CDK_SIGADDR, __LINE__);
- memcpy(&ecpsig, ecpsigp, sizeof(cdkecpsig_t));
- if (ecpsig.magic == ECP_MAGIC)
+ memcpy_fromio(&ecpsig, ecpsigp, sizeof(cdkecpsig_t));
+ if (ecpsig.magic == cpu_to_le32(ECP_MAGIC))
foundit = 1;
} else {
- onbsigp = (cdkonbsig_t *) stli_onbegetmemptr(brdp,
+ onbsigp = (cdkonbsig_t __iomem *) stli_onbegetmemptr(brdp,
CDK_SIGADDR, __LINE__);
- memcpy(&onbsig, onbsigp, sizeof(cdkonbsig_t));
- if ((onbsig.magic0 == ONB_MAGIC0) &&
- (onbsig.magic1 == ONB_MAGIC1) &&
- (onbsig.magic2 == ONB_MAGIC2) &&
- (onbsig.magic3 == ONB_MAGIC3))
+ memcpy_fromio(&onbsig, onbsigp, sizeof(cdkonbsig_t));
+ if ((onbsig.magic0 == cpu_to_le16(ONB_MAGIC0)) &&
+ (onbsig.magic1 == cpu_to_le16(ONB_MAGIC1)) &&
+ (onbsig.magic2 == cpu_to_le16(ONB_MAGIC2)) &&
+ (onbsig.magic3 == cpu_to_le16(ONB_MAGIC3)))
foundit = 1;
}
printk(KERN_ERR "STALLION: failed to probe shared memory "
"region for %s in EISA slot=%d\n",
stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
- return(-ENODEV);
+ return -ENODEV;
}
- return(0);
+ return 0;
}
static int stli_getbrdnr(void)
static int stli_findeisabrds(void)
{
- stlibrd_t *brdp;
- unsigned int iobase, eid;
- int i;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_findeisabrds()\n");
-#endif
+ stlibrd_t *brdp;
+ unsigned int iobase, eid;
+ int i;
/*
- * Firstly check if this is an EISA system. Do this by probing for
- * the system board EISA ID. If this is not an EISA system then
+ * Firstly check if this is an EISA system. If this is not an EISA system then
* don't bother going any further!
*/
- outb(0xff, 0xc80);
- if (inb(0xc80) == 0xff)
- return(0);
+ if (EISA_bus)
+ return 0;
/*
* Looks like an EISA system, so go searching for EISA boards.
*/
for (i = 0; (i < STL_MAXBRDS); i++) {
brdp = stli_brds[i];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
continue;
if (brdp->iobase == iobase)
break;
* We have found a Stallion board and it is not configured already.
* Allocate a board structure and initialize it.
*/
- if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL)
- return(-ENOMEM);
+ if ((brdp = stli_allocbrd()) == NULL)
+ return -ENOMEM;
if ((brdp->brdnr = stli_getbrdnr()) < 0)
- return(-ENOMEM);
+ return -ENOMEM;
eid = inb(iobase + 0xc82);
if (eid == ECP_EISAID)
brdp->brdtype = BRD_ECPE;
stli_brdinit(brdp);
}
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_initpcibrd(int brdtype, struct pci_dev *devp)
{
- stlibrd_t *brdp;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_initpcibrd(brdtype=%d,busnr=%x,devnr=%x)\n",
- brdtype, dev->bus->number, dev->devfn);
-#endif
+ stlibrd_t *brdp;
if (pci_enable_device(devp))
- return(-EIO);
- if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL)
- return(-ENOMEM);
+ return -EIO;
+ if ((brdp = stli_allocbrd()) == NULL)
+ return -ENOMEM;
if ((brdp->brdnr = stli_getbrdnr()) < 0) {
printk(KERN_INFO "STALLION: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
- return(0);
+ return 0;
}
brdp->brdtype = brdtype;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "%s(%d): BAR[]=%lx,%lx,%lx,%lx\n", __FILE__, __LINE__,
- pci_resource_start(devp, 0),
- pci_resource_start(devp, 1),
- pci_resource_start(devp, 2),
- pci_resource_start(devp, 3));
-#endif
-
/*
* We have all resources from the board, so lets setup the actual
* board structure now.
brdp->memaddr = pci_resource_start(devp, 2);
stli_brdinit(brdp);
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_findpcibrds(void)
{
- struct pci_dev *dev = NULL;
- int rc;
+ struct pci_dev *dev = NULL;
-#ifdef DEBUG
- printk("stli_findpcibrds()\n");
-#endif
-
- while ((dev = pci_find_device(PCI_VENDOR_ID_STALLION,
- PCI_DEVICE_ID_ECRA, dev))) {
- if ((rc = stli_initpcibrd(BRD_ECPPCI, dev)))
- return(rc);
+ while ((dev = pci_get_device(PCI_VENDOR_ID_STALLION, PCI_DEVICE_ID_ECRA, dev))) {
+ stli_initpcibrd(BRD_ECPPCI, dev);
}
-
- return(0);
+ return 0;
}
#endif
static stlibrd_t *stli_allocbrd(void)
{
- stlibrd_t *brdp;
+ stlibrd_t *brdp;
- brdp = (stlibrd_t *) stli_memalloc(sizeof(stlibrd_t));
- if (brdp == (stlibrd_t *) NULL) {
+ brdp = kzalloc(sizeof(stlibrd_t), GFP_KERNEL);
+ if (!brdp) {
printk(KERN_ERR "STALLION: failed to allocate memory "
- "(size=%d)\n", sizeof(stlibrd_t));
- return((stlibrd_t *) NULL);
+ "(size=%Zd)\n", sizeof(stlibrd_t));
+ return NULL;
}
-
- memset(brdp, 0, sizeof(stlibrd_t));
brdp->magic = STLI_BOARDMAGIC;
- return(brdp);
+ return brdp;
}
/*****************************************************************************/
static int stli_initbrds(void)
{
- stlibrd_t *brdp, *nxtbrdp;
- stlconf_t *confp;
- int i, j;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_initbrds()\n");
-#endif
+ stlibrd_t *brdp, *nxtbrdp;
+ stlconf_t *confp;
+ int i, j;
if (stli_nrbrds > STL_MAXBRDS) {
printk(KERN_INFO "STALLION: too many boards in configuration "
*/
for (i = 0; (i < stli_nrbrds); i++) {
confp = &stli_brdconf[i];
-#ifdef MODULE
stli_parsebrd(confp, stli_brdsp[i]);
-#endif
- if ((brdp = stli_allocbrd()) == (stlibrd_t *) NULL)
- return(-ENOMEM);
+ if ((brdp = stli_allocbrd()) == NULL)
+ return -ENOMEM;
brdp->brdnr = i;
brdp->brdtype = confp->brdtype;
brdp->iobase = confp->ioaddr1;
* Static configuration table done, so now use dynamic methods to
* see if any more boards should be configured.
*/
-#ifdef MODULE
stli_argbrds();
-#endif
if (STLI_EISAPROBE)
stli_findeisabrds();
#ifdef CONFIG_PCI
if (stli_nrbrds > 1) {
for (i = 0; (i < stli_nrbrds); i++) {
brdp = stli_brds[i];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
continue;
for (j = i + 1; (j < stli_nrbrds); j++) {
nxtbrdp = stli_brds[j];
- if (nxtbrdp == (stlibrd_t *) NULL)
+ if (nxtbrdp == NULL)
continue;
if ((brdp->membase >= nxtbrdp->membase) &&
(brdp->membase <= (nxtbrdp->membase +
if (stli_shared == 0) {
for (i = 0; (i < stli_nrbrds); i++) {
brdp = stli_brds[i];
- if (brdp == (stlibrd_t *) NULL)
+ if (brdp == NULL)
continue;
if (brdp->state & BST_FOUND) {
EBRDENABLE(brdp);
}
}
- return(0);
+ return 0;
}
/*****************************************************************************/
static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp)
{
- unsigned long flags;
- void *memptr;
- stlibrd_t *brdp;
- int brdnr, size, n;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_memread(fp=%x,buf=%x,count=%x,offp=%x)\n",
- (int) fp, (int) buf, count, (int) offp);
-#endif
+ unsigned long flags;
+ void *memptr;
+ stlibrd_t *brdp;
+ int brdnr, size, n;
+ void *p;
+ loff_t off = *offp;
brdnr = iminor(fp->f_dentry->d_inode);
if (brdnr >= stli_nrbrds)
- return(-ENODEV);
+ return -ENODEV;
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
if (brdp->state == 0)
- return(-ENODEV);
- if (fp->f_pos >= brdp->memsize)
- return(0);
+ return -ENODEV;
+ if (off >= brdp->memsize || off + count < off)
+ return 0;
- size = MIN(count, (brdp->memsize - fp->f_pos));
+ size = MIN(count, (brdp->memsize - off));
+
+ /*
+ * Copy the data a page at a time
+ */
+
+ p = (void *)__get_free_page(GFP_KERNEL);
+ if(p == NULL)
+ return -ENOMEM;
- save_flags(flags);
- cli();
- EBRDENABLE(brdp);
while (size > 0) {
- memptr = (void *) EBRDGETMEMPTR(brdp, fp->f_pos);
- n = MIN(size, (brdp->pagesize - (((unsigned long) fp->f_pos) % brdp->pagesize)));
- if (copy_to_user(buf, memptr, n)) {
+ spin_lock_irqsave(&brd_lock, flags);
+ EBRDENABLE(brdp);
+ memptr = (void *) EBRDGETMEMPTR(brdp, off);
+ n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
+ n = MIN(n, PAGE_SIZE);
+ memcpy_fromio(p, memptr, n);
+ EBRDDISABLE(brdp);
+ spin_unlock_irqrestore(&brd_lock, flags);
+ if (copy_to_user(buf, p, n)) {
count = -EFAULT;
goto out;
}
- fp->f_pos += n;
+ off += n;
buf += n;
size -= n;
}
out:
- EBRDDISABLE(brdp);
- restore_flags(flags);
-
- return(count);
+ *offp = off;
+ free_page((unsigned long)p);
+ return count;
}
/*****************************************************************************/
* Code to handle an "staliomem" write operation. This device is the
* contents of the board shared memory. It is used for down loading
* the slave image (and debugging :-)
+ *
+ * FIXME: copy under lock
*/
static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp)
{
- unsigned long flags;
- void *memptr;
- stlibrd_t *brdp;
- char __user *chbuf;
- int brdnr, size, n;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_memwrite(fp=%x,buf=%x,count=%x,offp=%x)\n",
- (int) fp, (int) buf, count, (int) offp);
-#endif
+ unsigned long flags;
+ void *memptr;
+ stlibrd_t *brdp;
+ char __user *chbuf;
+ int brdnr, size, n;
+ void *p;
+ loff_t off = *offp;
brdnr = iminor(fp->f_dentry->d_inode);
+
if (brdnr >= stli_nrbrds)
- return(-ENODEV);
+ return -ENODEV;
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
if (brdp->state == 0)
- return(-ENODEV);
- if (fp->f_pos >= brdp->memsize)
- return(0);
+ return -ENODEV;
+ if (off >= brdp->memsize || off + count < off)
+ return 0;
chbuf = (char __user *) buf;
- size = MIN(count, (brdp->memsize - fp->f_pos));
+ size = MIN(count, (brdp->memsize - off));
+
+ /*
+ * Copy the data a page at a time
+ */
+
+ p = (void *)__get_free_page(GFP_KERNEL);
+ if(p == NULL)
+ return -ENOMEM;
- save_flags(flags);
- cli();
- EBRDENABLE(brdp);
while (size > 0) {
- memptr = (void *) EBRDGETMEMPTR(brdp, fp->f_pos);
- n = MIN(size, (brdp->pagesize - (((unsigned long) fp->f_pos) % brdp->pagesize)));
- if (copy_from_user(memptr, chbuf, n)) {
- count = -EFAULT;
+ n = MIN(size, (brdp->pagesize - (((unsigned long) off) % brdp->pagesize)));
+ n = MIN(n, PAGE_SIZE);
+ if (copy_from_user(p, chbuf, n)) {
+ if (count == 0)
+ count = -EFAULT;
goto out;
}
- fp->f_pos += n;
+ spin_lock_irqsave(&brd_lock, flags);
+ EBRDENABLE(brdp);
+ memptr = (void *) EBRDGETMEMPTR(brdp, off);
+ memcpy_toio(memptr, p, n);
+ EBRDDISABLE(brdp);
+ spin_unlock_irqrestore(&brd_lock, flags);
+ off += n;
chbuf += n;
size -= n;
}
out:
- EBRDDISABLE(brdp);
- restore_flags(flags);
-
- return(count);
+ free_page((unsigned long) p);
+ *offp = off;
+ return count;
}
/*****************************************************************************/
static int stli_getbrdstats(combrd_t __user *bp)
{
- stlibrd_t *brdp;
- int i;
+ stlibrd_t *brdp;
+ int i;
if (copy_from_user(&stli_brdstats, bp, sizeof(combrd_t)))
return -EFAULT;
if (stli_brdstats.brd >= STL_MAXBRDS)
- return(-ENODEV);
+ return -ENODEV;
brdp = stli_brds[stli_brdstats.brd];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
memset(&stli_brdstats, 0, sizeof(combrd_t));
stli_brdstats.brd = brdp->brdnr;
if (copy_to_user(bp, &stli_brdstats, sizeof(combrd_t)))
return -EFAULT;
- return(0);
+ return 0;
}
/*****************************************************************************/
static stliport_t *stli_getport(int brdnr, int panelnr, int portnr)
{
- stlibrd_t *brdp;
- int i;
+ stlibrd_t *brdp;
+ int i;
- if ((brdnr < 0) || (brdnr >= STL_MAXBRDS))
- return((stliport_t *) NULL);
+ if (brdnr < 0 || brdnr >= STL_MAXBRDS)
+ return NULL;
brdp = stli_brds[brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return((stliport_t *) NULL);
+ if (brdp == NULL)
+ return NULL;
for (i = 0; (i < panelnr); i++)
portnr += brdp->panels[i];
if ((portnr < 0) || (portnr >= brdp->nrports))
- return((stliport_t *) NULL);
- return(brdp->ports[portnr]);
+ return NULL;
+ return brdp->ports[portnr];
}
/*****************************************************************************/
memset(&stli_comstats, 0, sizeof(comstats_t));
- if (portp == (stliport_t *) NULL)
- return(-ENODEV);
+ if (portp == NULL)
+ return -ENODEV;
brdp = stli_brds[portp->brdnr];
- if (brdp == (stlibrd_t *) NULL)
- return(-ENODEV);
+ if (brdp == NULL)
+ return -ENODEV;
if (brdp->state & BST_STARTED) {
if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS,
&stli_cdkstats, sizeof(asystats_t), 1)) < 0)
- return(rc);
+ return rc;
} else {
memset(&stli_cdkstats, 0, sizeof(asystats_t));
}
stli_comstats.state = portp->state;
stli_comstats.flags = portp->flags;
- save_flags(flags);
- cli();
- if (portp->tty != (struct tty_struct *) NULL) {
+ spin_lock_irqsave(&brd_lock, flags);
+ if (portp->tty != NULL) {
if (portp->tty->driver_data == portp) {
stli_comstats.ttystate = portp->tty->flags;
- stli_comstats.rxbuffered = portp->tty->flip.count;
- if (portp->tty->termios != (struct termios *) NULL) {
+ stli_comstats.rxbuffered = -1;
+ if (portp->tty->termios != NULL) {
stli_comstats.cflags = portp->tty->termios->c_cflag;
stli_comstats.iflags = portp->tty->termios->c_iflag;
stli_comstats.oflags = portp->tty->termios->c_oflag;
}
}
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&brd_lock, flags);
stli_comstats.txtotal = stli_cdkstats.txchars;
stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover;
stli_comstats.hwid = stli_cdkstats.hwid;
stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
- return(0);
+ return 0;
}
/*****************************************************************************/
static int stli_getportstats(stliport_t *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
- int rc;
+ stlibrd_t *brdp;
+ int rc;
if (!portp) {
if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
static int stli_clrportstats(stliport_t *portp, comstats_t __user *cp)
{
- stlibrd_t *brdp;
- int rc;
+ stlibrd_t *brdp;
+ int rc;
if (!portp) {
if (copy_from_user(&stli_comstats, cp, sizeof(comstats_t)))
static int stli_getportstruct(stliport_t __user *arg)
{
- stliport_t *portp;
+ stliport_t *portp;
if (copy_from_user(&stli_dummyport, arg, sizeof(stliport_t)))
return -EFAULT;
static int stli_getbrdstruct(stlibrd_t __user *arg)
{
- stlibrd_t *brdp;
+ stlibrd_t *brdp;
if (copy_from_user(&stli_dummybrd, arg, sizeof(stlibrd_t)))
return -EFAULT;
static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg)
{
- stlibrd_t *brdp;
- int brdnr, rc, done;
+ stlibrd_t *brdp;
+ int brdnr, rc, done;
void __user *argp = (void __user *)arg;
-#ifdef DEBUG
- printk(KERN_DEBUG "stli_memioctl(ip=%x,fp=%x,cmd=%x,arg=%x)\n",
- (int) ip, (int) fp, cmd, (int) arg);
-#endif
-
/*
* First up handle the board independent ioctls.
*/
}
if (done)
- return(rc);
+ return rc;
/*
* Now handle the board specific ioctls. These all depend on the
*/
brdnr = iminor(ip);
if (brdnr >= STL_MAXBRDS)
- return(-ENODEV);
+ return -ENODEV;
brdp = stli_brds[brdnr];
if (!brdp)
- return(-ENODEV);
+ return -ENODEV;
if (brdp->state == 0)
- return(-ENODEV);
+ return -ENODEV;
switch (cmd) {
case STL_BINTR:
rc = -ENOIOCTLCMD;
break;
}
-
- return(rc);
+ return rc;
}
static struct tty_operations stli_ops = {
/*****************************************************************************/
-int __init stli_init(void)
+static int __init stli_init(void)
{
int i;
printk(KERN_INFO "%s: version %s\n", stli_drvtitle, stli_drvversion);
+ spin_lock_init(&stli_lock);
+ spin_lock_init(&brd_lock);
+
stli_initbrds();
stli_serial = alloc_tty_driver(STL_MAXBRDS * STL_MAXPORTS);
/*
* Allocate a temporary write buffer.
*/
- stli_tmpwritebuf = (char *) stli_memalloc(STLI_TXBUFSIZE);
- if (stli_tmpwritebuf == (char *) NULL)
- printk(KERN_ERR "STALLION: failed to allocate memory "
- "(size=%d)\n", STLI_TXBUFSIZE);
- stli_txcookbuf = stli_memalloc(STLI_TXBUFSIZE);
- if (stli_txcookbuf == (char *) NULL)
+ stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
+ if (!stli_txcookbuf)
printk(KERN_ERR "STALLION: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
printk(KERN_ERR "STALLION: failed to register serial memory "
"device\n");
- devfs_mk_dir("staliomem");
istallion_class = class_create(THIS_MODULE, "staliomem");
- for (i = 0; i < 4; i++) {
- devfs_mk_cdev(MKDEV(STL_SIOMEMMAJOR, i),
- S_IFCHR | S_IRUSR | S_IWUSR,
- "staliomem/%d", i);
- class_device_create(istallion_class, MKDEV(STL_SIOMEMMAJOR, i),
+ for (i = 0; i < 4; i++)
+ class_device_create(istallion_class, NULL,
+ MKDEV(STL_SIOMEMMAJOR, i),
NULL, "staliomem%d", i);
- }
/*
* Set up the tty driver structure and register us as a driver.
printk(KERN_ERR "STALLION: failed to register serial driver\n");
return -EBUSY;
}
- return(0);
+ return 0;
}
/*****************************************************************************/
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff