/*****************************************************************************/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/seq_file.h>
#include <linux/cdk.h>
#include <linux/comstats.h>
#include <linux/istallion.h>
static char *stli_serialname = "ttyE";
static struct tty_driver *stli_serial;
-
+static const struct tty_port_operations stli_port_ops;
#define STLI_TXBUFSIZE 4096
static void stli_waituntilsent(struct tty_struct *tty, int timeout);
static void stli_sendxchar(struct tty_struct *tty, char ch);
static void stli_hangup(struct tty_struct *tty);
-static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos);
static int stli_brdinit(struct stlibrd *brdp);
static int stli_startbrd(struct stlibrd *brdp);
static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp);
static void stli_poll(unsigned long arg);
static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp);
+static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp);
-static int stli_setport(struct stliport *portp);
+static int stli_setport(struct tty_struct *tty);
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_dodelaycmd(struct stliport *portp, cdkctrl_t __iomem *cp);
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp, asyport_t *pp, struct ktermios *tiosp);
static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
static long stli_mktiocm(unsigned long sigvalue);
static void stli_read(struct stlibrd *brdp, struct stliport *portp);
static int stli_getserial(struct stliport *portp, struct serial_struct __user *sp);
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp);
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp);
static int stli_getbrdstats(combrd_t __user *bp);
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp);
-static int stli_portcmdstats(struct stliport *portp);
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp, comstats_t __user *cp);
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp);
static int stli_clrportstats(struct stliport *portp, comstats_t __user *cp);
static int stli_getportstruct(struct stliport __user *arg);
static int stli_getbrdstruct(struct stlibrd __user *arg);
{
struct stliport *portp;
unsigned int j;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPORTS; j++) {
portp = brdp->ports[j];
if (portp != NULL) {
- if (portp->port.tty != NULL)
- tty_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ tty_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp);
}
}
break;
}
if (i == ARRAY_SIZE(stli_brdstr)) {
- printk("STALLION: unknown board name, %s?\n", argp[0]);
+ printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
return 0;
}
{
struct stlibrd *brdp;
struct stliport *portp;
+ struct tty_port *port;
unsigned int minordev, brdnr, portnr;
int rc;
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
-
-
-/*
- * Check if this port is in the middle of closing. If so then wait
- * until it is closed then return error status based on flag settings.
- * The sleep here does not need interrupt protection since the wakeup
- * for it is done with the same context.
- */
- if (portp->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->port.close_wait);
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
+ port = &portp->port;
/*
* On the first open of the device setup the port hardware, and
* initialize the per port data structure. Since initializing the port
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
+ *
+ * Review - locking
*/
- portp->port.tty = tty;
+ tty_port_tty_set(port, tty);
tty->driver_data = portp;
- portp->port.count++;
+ port->count++;
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_INITIALIZING, &portp->state));
if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
- if ((rc = stli_initopen(brdp, portp)) >= 0) {
- portp->port.flags |= ASYNC_INITIALIZED;
+ if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
+ /* Locking */
+ port->flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
clear_bit(ST_INITIALIZING, &portp->state);
if (rc < 0)
return rc;
}
-
-/*
- * Check if this port is in the middle of closing. If so then wait
- * until it is closed then return error status, based on flag settings.
- * The sleep here does not need interrupt protection since the wakeup
- * for it is done with the same context.
- */
- if (portp->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->port.close_wait);
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
-/*
- * Based on type of open being done check if it can overlap with any
- * previous opens still in effect. If we are a normal serial device
- * then also we might have to wait for carrier.
- */
- if (!(filp->f_flags & O_NONBLOCK)) {
- if ((rc = stli_waitcarrier(brdp, portp, filp)) != 0)
- return rc;
- }
- portp->port.flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
+ return tty_port_block_til_ready(&portp->port, tty, filp);
}
/*****************************************************************************/
{
struct stlibrd *brdp;
struct stliport *portp;
+ struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return;
+ port = &portp->port;
- spin_lock_irqsave(&stli_lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&stli_lock, flags);
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
- if ((tty->count == 1) && (portp->port.count != 1))
- portp->port.count = 1;
- if (portp->port.count-- > 1) {
- spin_unlock_irqrestore(&stli_lock, flags);
- return;
- }
-
- portp->port.flags |= ASYNC_CLOSING;
/*
* May want to wait for data to drain before closing. The BUSY flag
* updated by messages from the slave - indicating when all chars
* really have drained.
*/
+ spin_lock_irqsave(&stli_lock, flags);
if (tty == stli_txcooktty)
stli_flushchars(tty);
- tty->closing = 1;
spin_unlock_irqrestore(&stli_lock, flags);
+ /* We end up doing this twice for the moment. This needs looking at
+ eventually. Note we still use portp->closing_wait as a result */
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
- portp->port.flags &= ~ASYNC_INITIALIZED;
+ /* FIXME: port locking here needs attending to */
+ port->flags &= ~ASYNC_INITIALIZED;
+
brdp = stli_brds[portp->brdnr];
stli_rawclose(brdp, portp, 0, 0);
if (tty->termios->c_cflag & HUPCL) {
set_bit(ST_DOFLUSHRX, &portp->state);
stli_flushbuffer(tty);
- tty->closing = 0;
- portp->port.tty = NULL;
-
- if (portp->openwaitcnt) {
- if (portp->close_delay)
- msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&portp->port.open_wait);
- }
-
- portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&portp->port.close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*****************************************************************************/
* this still all happens pretty quickly.
*/
-static int stli_initopen(struct stlibrd *brdp, struct stliport *portp)
+static int stli_initopen(struct tty_struct *tty,
+ struct stlibrd *brdp, struct stliport *portp)
{
- struct tty_struct *tty;
asynotify_t nt;
asyport_t aport;
int rc;
sizeof(asynotify_t), 0)) < 0)
return rc;
- tty = portp->port.tty;
- if (tty == NULL)
- return -ENODEV;
- stli_mkasyport(portp, &aport, tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
sizeof(asyport_t), 0)) < 0)
return rc;
* waiting for the command to complete - so must have user context.
*/
-static int stli_setport(struct stliport *portp)
+static int stli_setport(struct tty_struct *tty)
{
+ struct stliport *portp = tty->driver_data;
struct stlibrd *brdp;
asyport_t aport;
if (portp == NULL)
return -ENODEV;
- if (portp->port.tty == NULL)
- return -ENODEV;
if (portp->brdnr >= stli_nrbrds)
return -ENODEV;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return -ENODEV;
- stli_mkasyport(portp, &aport, portp->port.tty->termios);
+ stli_mkasyport(tty, portp, &aport, tty->termios);
return(stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0));
}
/*****************************************************************************/
-/*
- * Possibly need to wait for carrier (DCD signal) to come high. Say
- * maybe because if we are clocal then we don't need to wait...
- */
-
-static int stli_waitcarrier(struct stlibrd *brdp, struct stliport *portp, struct file *filp)
+static int stli_carrier_raised(struct tty_port *port)
{
- unsigned long flags;
- int rc, doclocal;
-
- rc = 0;
- doclocal = 0;
-
- if (portp->port.tty->termios->c_cflag & CLOCAL)
- doclocal++;
-
- spin_lock_irqsave(&stli_lock, flags);
- portp->openwaitcnt++;
- if (! tty_hung_up_p(filp))
- portp->port.count--;
- spin_unlock_irqrestore(&stli_lock, flags);
-
- for (;;) {
- stli_mkasysigs(&portp->asig, 1, 1);
- if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS,
- &portp->asig, sizeof(asysigs_t), 0)) < 0)
- break;
- if (tty_hung_up_p(filp) ||
- ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- rc = -EBUSY;
- else
- rc = -ERESTARTSYS;
- break;
- }
- if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD))) {
- break;
- }
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->port.open_wait);
- }
-
- spin_lock_irqsave(&stli_lock, flags);
- if (! tty_hung_up_p(filp))
- portp->port.count++;
- portp->openwaitcnt--;
- spin_unlock_irqrestore(&stli_lock, flags);
+ struct stliport *portp = container_of(port, struct stliport, port);
+ return (portp->sigs & TIOCM_CD) ? 1 : 0;
+}
- return rc;
+static void stli_dtr_rts(struct tty_port *port, int on)
+{
+ struct stliport *portp = container_of(port, struct stliport, port);
+ struct stlibrd *brdp = stli_brds[portp->brdnr];
+ stli_mkasysigs(&portp->asig, on, on);
+ if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+ sizeof(asysigs_t), 0) < 0)
+ printk(KERN_WARNING "istallion: dtr set failed.\n");
}
+
/*****************************************************************************/
/*
stli_txcookrealsize = 0;
stli_txcooktty = NULL;
- if (tty == NULL)
- return;
if (cooktty == NULL)
return;
if (tty != cooktty)
sio.irq = 0;
sio.flags = portp->port.flags;
sio.baud_base = portp->baud_base;
- sio.close_delay = portp->close_delay;
+ sio.close_delay = portp->port.close_delay;
sio.closing_wait = portp->closing_wait;
sio.custom_divisor = portp->custom_divisor;
sio.xmit_fifo_size = 0;
* just quietly ignore any requests to change irq, etc.
*/
-static int stli_setserial(struct stliport *portp, struct serial_struct __user *sp)
+static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
struct serial_struct sio;
int rc;
+ struct stliport *portp = tty->driver_data;
if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
return -EFAULT;
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
- (sio.close_delay != portp->close_delay) ||
+ (sio.close_delay != portp->port.close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
(portp->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
portp->baud_base = sio.baud_base;
- portp->close_delay = sio.close_delay;
+ portp->port.close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- if ((rc = stli_setport(portp)) < 0)
+ if ((rc = stli_setport(tty)) < 0)
return rc;
return 0;
}
rc = stli_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stli_setserial(portp, argp);
+ rc = stli_setserial(tty, argp);
break;
case STL_GETPFLAG:
rc = put_user(portp->pflag, (unsigned __user *)argp);
break;
case STL_SETPFLAG:
if ((rc = get_user(portp->pflag, (unsigned __user *)argp)) == 0)
- stli_setport(portp);
+ stli_setport(tty);
break;
case COM_GETPORTSTATS:
- rc = stli_getportstats(portp, argp);
+ rc = stli_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stli_clrportstats(portp, argp);
struct ktermios *tiosp;
asyport_t aport;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
tiosp = tty->termios;
- stli_mkasyport(portp, &aport, tiosp);
+ stli_mkasyport(tty, portp, &aport, tiosp);
stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
stli_mkasysigs(&portp->asig, ((tiosp->c_cflag & CBAUD) ? 1 : 0), -1);
stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
{
struct stliport *portp;
struct stlibrd *brdp;
+ struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return;
+ port = &portp->port;
- portp->port.flags &= ~ASYNC_INITIALIZED;
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_INITIALIZED;
+ spin_unlock_irqrestore(&port->lock, flags);
if (!test_bit(ST_CLOSING, &portp->state))
stli_rawclose(brdp, portp, 0, 0);
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- portp->port.tty = NULL;
- portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- portp->port.count = 0;
spin_unlock_irqrestore(&stli_lock, flags);
- wake_up_interruptible(&portp->port.open_wait);
+ tty_port_hangup(port);
}
/*****************************************************************************/
struct stliport *portp;
unsigned long tend;
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
stli_cmdwait(brdp, portp, A_PORTCTRL, &actrl, sizeof(asyctrl_t), 0);
}
-/*****************************************************************************/
-
-#define MAXLINE 80
-
-/*
- * Format info for a specified port. The line is deliberately limited
- * to 80 characters. (If it is too long it will be truncated, if too
- * short then padded with spaces).
- */
-
-static int stli_portinfo(struct stlibrd *brdp, struct stliport *portp, int portnr, char *pos)
+static void stli_portinfo(struct seq_file *m, struct stlibrd *brdp, struct stliport *portp, int portnr)
{
- char *sp, *uart;
- int rc, cnt;
+ char *uart;
+ int rc;
- rc = stli_portcmdstats(portp);
+ rc = stli_portcmdstats(NULL, portp);
uart = "UNKNOWN";
if (brdp->state & BST_STARTED) {
default:uart = "CD1400"; break;
}
}
-
- sp = pos;
- sp += sprintf(sp, "%d: uart:%s ", portnr, uart);
+ seq_printf(m, "%d: uart:%s ", portnr, uart);
if ((brdp->state & BST_STARTED) && (rc >= 0)) {
- sp += sprintf(sp, "tx:%d rx:%d", (int) stli_comstats.txtotal,
+ char sep;
+
+ seq_printf(m, "tx:%d rx:%d", (int) stli_comstats.txtotal,
(int) stli_comstats.rxtotal);
if (stli_comstats.rxframing)
- sp += sprintf(sp, " fe:%d",
+ seq_printf(m, " fe:%d",
(int) stli_comstats.rxframing);
if (stli_comstats.rxparity)
- sp += sprintf(sp, " pe:%d",
+ seq_printf(m, " pe:%d",
(int) stli_comstats.rxparity);
if (stli_comstats.rxbreaks)
- sp += sprintf(sp, " brk:%d",
+ seq_printf(m, " brk:%d",
(int) stli_comstats.rxbreaks);
if (stli_comstats.rxoverrun)
- sp += sprintf(sp, " oe:%d",
+ seq_printf(m, " oe:%d",
(int) stli_comstats.rxoverrun);
- cnt = sprintf(sp, "%s%s%s%s%s ",
- (stli_comstats.signals & TIOCM_RTS) ? "|RTS" : "",
- (stli_comstats.signals & TIOCM_CTS) ? "|CTS" : "",
- (stli_comstats.signals & TIOCM_DTR) ? "|DTR" : "",
- (stli_comstats.signals & TIOCM_CD) ? "|DCD" : "",
- (stli_comstats.signals & TIOCM_DSR) ? "|DSR" : "");
- *sp = ' ';
- sp += cnt;
+ sep = ' ';
+ if (stli_comstats.signals & TIOCM_RTS) {
+ seq_printf(m, "%c%s", sep, "RTS");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_CTS) {
+ seq_printf(m, "%c%s", sep, "CTS");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_DTR) {
+ seq_printf(m, "%c%s", sep, "DTR");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_CD) {
+ seq_printf(m, "%c%s", sep, "DCD");
+ sep = '|';
+ }
+ if (stli_comstats.signals & TIOCM_DSR) {
+ seq_printf(m, "%c%s", sep, "DSR");
+ sep = '|';
+ }
}
-
- for (cnt = (sp - pos); (cnt < (MAXLINE - 1)); cnt++)
- *sp++ = ' ';
- if (cnt >= MAXLINE)
- pos[(MAXLINE - 2)] = '+';
- pos[(MAXLINE - 1)] = '\n';
-
- return(MAXLINE);
+ seq_putc(m, '\n');
}
/*****************************************************************************/
* Port info, read from the /proc file system.
*/
-static int stli_readproc(char *page, char **start, off_t off, int count, int *eof, void *data)
+static int stli_proc_show(struct seq_file *m, void *v)
{
struct stlibrd *brdp;
struct stliport *portp;
unsigned int brdnr, portnr, totalport;
- int curoff, maxoff;
- char *pos;
- pos = page;
totalport = 0;
- curoff = 0;
-
- if (off == 0) {
- pos += sprintf(pos, "%s: version %s", stli_drvtitle,
- stli_drvversion);
- while (pos < (page + MAXLINE - 1))
- *pos++ = ' ';
- *pos++ = '\n';
- }
- curoff = MAXLINE;
+
+ seq_printf(m, "%s: version %s\n", stli_drvtitle, stli_drvversion);
/*
* We scan through for each board, panel and port. The offset is
if (brdp->state == 0)
continue;
- maxoff = curoff + (brdp->nrports * MAXLINE);
- if (off >= maxoff) {
- curoff = maxoff;
- continue;
- }
-
totalport = brdnr * STL_MAXPORTS;
for (portnr = 0; (portnr < brdp->nrports); portnr++,
totalport++) {
portp = brdp->ports[portnr];
if (portp == NULL)
continue;
- if (off >= (curoff += MAXLINE))
- continue;
- if ((pos - page + MAXLINE) > count)
- goto stli_readdone;
- pos += stli_portinfo(brdp, portp, totalport, pos);
+ stli_portinfo(m, brdp, portp, totalport);
}
}
+ return 0;
+}
- *eof = 1;
-
-stli_readdone:
- *start = page;
- return(pos - page);
+static int stli_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, stli_proc_show, NULL);
}
+static const struct file_operations stli_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = stli_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*****************************************************************************/
/*
unsigned char __iomem *bits;
if (test_bit(ST_CMDING, &portp->state)) {
- printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n",
+ printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
(int) cmd);
return;
}
if (test_bit(ST_RXSTOP, &portp->state))
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
set_bit(ST_RXING, &portp->state);
tty_schedule_flip(tty);
+ tty_kref_put(tty);
}
/*****************************************************************************/
if (ap->notify) {
nt = ap->changed;
ap->notify = 0;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (nt.signal & SG_DCD) {
oldsigs = portp->sigs;
tty_schedule_flip(tty);
}
}
+ tty_kref_put(tty);
if (nt.data & DT_RXBUSY) {
donerx++;
* the slave.
*/
-static void stli_mkasyport(struct stliport *portp, asyport_t *pp, struct ktermios *tiosp)
+static void stli_mkasyport(struct tty_struct *tty, struct stliport *portp,
+ asyport_t *pp, struct ktermios *tiosp)
{
memset(pp, 0, sizeof(asyport_t));
/*
* Start of by setting the baud, char size, parity and stop bit info.
*/
- pp->baudout = tty_get_baud_rate(portp->port.tty);
+ pp->baudout = tty_get_baud_rate(tty);
if ((tiosp->c_cflag & CBAUD) == B38400) {
if ((portp->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
pp->baudout = 57600;
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
if (!portp) {
- printk("STALLION: failed to allocate port structure\n");
+ printk(KERN_WARNING "istallion: failed to allocate port structure\n");
continue;
}
-
+ tty_port_init(&portp->port);
+ portp->port.ops = &stli_port_ops;
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
portp->panelnr = panelnr;
portp->baud_base = STL_BAUDBASE;
- portp->close_delay = STL_CLOSEDELAY;
+ portp->port.close_delay = STL_CLOSEDELAY;
portp->closing_wait = 30 * HZ;
init_waitqueue_head(&portp->port.open_wait);
init_waitqueue_head(&portp->port.close_wait);
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), board=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
void __iomem *ptr;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
#endif
if (nrdevs < (brdp->nrports + 1)) {
- printk(KERN_ERR "STALLION: slave failed to allocate memory for "
+ printk(KERN_ERR "istallion: slave failed to allocate memory for "
"all devices, devices=%d\n", nrdevs);
brdp->nrports = nrdevs - 1;
}
brdp->bitsize = (nrdevs + 7) / 8;
memoff = readl(&hdrp->memp);
if (memoff > brdp->memsize) {
- printk(KERN_ERR "STALLION: corrupted shared memory region?\n");
+ printk(KERN_ERR "istallion: corrupted shared memory region?\n");
rc = -EIO;
goto stli_donestartup;
}
memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
if (readw(&memp->dtype) != TYP_ASYNCTRL) {
- printk(KERN_ERR "STALLION: no slave control device found\n");
+ printk(KERN_ERR "istallion: no slave control device found\n");
goto stli_donestartup;
}
memp++;
retval = stli_initonb(brdp);
break;
default:
- printk(KERN_ERR "STALLION: board=%d is unknown board "
+ printk(KERN_ERR "istallion: board=%d is unknown board "
"type=%d\n", brdp->brdnr, brdp->brdtype);
retval = -ENODEV;
}
return retval;
stli_initports(brdp);
- printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x "
+ printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
"nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
brdp->nrpanels, brdp->nrports);
if (! foundit) {
brdp->memaddr = 0;
brdp->membase = NULL;
- printk(KERN_ERR "STALLION: failed to probe shared memory "
+ printk(KERN_ERR "istallion: failed to probe shared memory "
"region for %s in EISA slot=%d\n",
stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
return -ENODEV;
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
mutex_lock(&stli_brdslock);
brdnr = stli_getbrdnr();
if (brdnr < 0) {
- printk(KERN_INFO "STALLION: too many boards found, "
+ printk(KERN_INFO "istallion: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
mutex_unlock(&stli_brdslock);
retval = -EIO;
return retval;
}
-static void stli_pciremove(struct pci_dev *pdev)
+static void __devexit stli_pciremove(struct pci_dev *pdev)
{
struct stlibrd *brdp = pci_get_drvdata(pdev);
brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
if (!brdp) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%Zd)\n", sizeof(struct stlibrd));
return NULL;
}
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
* what port to get stats for (used through board control device).
*/
-static int stli_portcmdstats(struct stliport *portp)
+static int stli_portcmdstats(struct tty_struct *tty, struct stliport *portp)
{
unsigned long flags;
struct stlibrd *brdp;
stli_comstats.flags = portp->port.flags;
spin_lock_irqsave(&brd_lock, flags);
- if (portp->port.tty != NULL) {
- if (portp->port.tty->driver_data == portp) {
- stli_comstats.ttystate = portp->port.tty->flags;
+ if (tty != NULL) {
+ if (portp->port.tty == tty) {
+ stli_comstats.ttystate = tty->flags;
stli_comstats.rxbuffered = -1;
- if (portp->port.tty->termios != NULL) {
- stli_comstats.cflags = portp->port.tty->termios->c_cflag;
- stli_comstats.iflags = portp->port.tty->termios->c_iflag;
- stli_comstats.oflags = portp->port.tty->termios->c_oflag;
- stli_comstats.lflags = portp->port.tty->termios->c_lflag;
+ if (tty->termios != NULL) {
+ stli_comstats.cflags = tty->termios->c_cflag;
+ stli_comstats.iflags = tty->termios->c_iflag;
+ stli_comstats.oflags = tty->termios->c_oflag;
+ stli_comstats.lflags = tty->termios->c_lflag;
}
}
}
* what port to get stats for (used through board control device).
*/
-static int stli_getportstats(struct stliport *portp, comstats_t __user *cp)
+static int stli_getportstats(struct tty_struct *tty, struct stliport *portp,
+ comstats_t __user *cp)
{
struct stlibrd *brdp;
int rc;
if (!brdp)
return -ENODEV;
- if ((rc = stli_portcmdstats(portp)) < 0)
+ if ((rc = stli_portcmdstats(tty, portp)) < 0)
return rc;
return copy_to_user(cp, &stli_comstats, sizeof(comstats_t)) ?
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stli_getportstats(NULL, argp);
+ rc = stli_getportstats(NULL, NULL, argp);
done++;
break;
case COM_CLRPORTSTATS:
.break_ctl = stli_breakctl,
.wait_until_sent = stli_waituntilsent,
.send_xchar = stli_sendxchar,
- .read_proc = stli_readproc,
.tiocmget = stli_tiocmget,
.tiocmset = stli_tiocmset,
+ .proc_fops = &stli_proc_fops,
+};
+
+static const struct tty_port_operations stli_port_ops = {
+ .carrier_raised = stli_carrier_raised,
+ .dtr_rts = stli_dtr_rts,
};
/*****************************************************************************/
stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
if (!stli_txcookbuf) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
retval = -ENOMEM;
goto err;
retval = tty_register_driver(stli_serial);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial driver\n");
+ printk(KERN_ERR "istallion: failed to register serial driver\n");
goto err_ttyput;
}
*/
retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial memory "
+ printk(KERN_ERR "istallion: failed to register serial memory "
"device\n");
goto err_deinit;
}
istallion_class = class_create(THIS_MODULE, "staliomem");
for (i = 0; i < 4; i++)
device_create(istallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
- "staliomem%d", i);
+ NULL, "staliomem%d", i);
return 0;
err_deinit:
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff