* source@mvista.com
*
* Copyright 2002 MontaVista Software Inc.
+ * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <linux/dmi.h>
#include <linux/string.h>
#include <linux/ctype.h>
+#include <linux/pnp.h>
+
+#ifdef CONFIG_PPC_OF
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#endif
#define PFX "ipmi_si: "
#define SI_USEC_PER_JIFFY (1000000/HZ)
#define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
- short timeout */
+ short timeout */
enum si_intf_state {
SI_NORMAL,
SI_CLEARING_FLAGS_THEN_SET_IRQ,
SI_GETTING_MESSAGES,
SI_ENABLE_INTERRUPTS1,
- SI_ENABLE_INTERRUPTS2
+ SI_ENABLE_INTERRUPTS2,
+ SI_DISABLE_INTERRUPTS1,
+ SI_DISABLE_INTERRUPTS2
/* FIXME - add watchdog stuff. */
};
};
static char *si_to_str[] = { "kcs", "smic", "bt" };
+enum ipmi_addr_src {
+ SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
+ SI_PCI, SI_DEVICETREE, SI_DEFAULT
+};
+static char *ipmi_addr_src_to_str[] = { NULL, "hotmod", "hardcoded", "SPMI",
+ "ACPI", "SMBIOS", "PCI",
+ "device-tree", "default" };
+
#define DEVICE_NAME "ipmi_si"
-static struct device_driver ipmi_driver =
-{
- .name = DEVICE_NAME,
- .bus = &platform_bus_type
+static struct platform_driver ipmi_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .bus = &platform_bus_type
+ }
};
-struct smi_info
-{
+
+/*
+ * Indexes into stats[] in smi_info below.
+ */
+enum si_stat_indexes {
+ /*
+ * Number of times the driver requested a timer while an operation
+ * was in progress.
+ */
+ SI_STAT_short_timeouts = 0,
+
+ /*
+ * Number of times the driver requested a timer while nothing was in
+ * progress.
+ */
+ SI_STAT_long_timeouts,
+
+ /* Number of times the interface was idle while being polled. */
+ SI_STAT_idles,
+
+ /* Number of interrupts the driver handled. */
+ SI_STAT_interrupts,
+
+ /* Number of time the driver got an ATTN from the hardware. */
+ SI_STAT_attentions,
+
+ /* Number of times the driver requested flags from the hardware. */
+ SI_STAT_flag_fetches,
+
+ /* Number of times the hardware didn't follow the state machine. */
+ SI_STAT_hosed_count,
+
+ /* Number of completed messages. */
+ SI_STAT_complete_transactions,
+
+ /* Number of IPMI events received from the hardware. */
+ SI_STAT_events,
+
+ /* Number of watchdog pretimeouts. */
+ SI_STAT_watchdog_pretimeouts,
+
+ /* Number of asyncronous messages received. */
+ SI_STAT_incoming_messages,
+
+
+ /* This *must* remain last, add new values above this. */
+ SI_NUM_STATS
+};
+
+struct smi_info {
int intf_num;
ipmi_smi_t intf;
struct si_sm_data *si_sm;
struct ipmi_smi_msg *curr_msg;
enum si_intf_state si_state;
- /* Used to handle the various types of I/O that can occur with
- IPMI */
+ /*
+ * Used to handle the various types of I/O that can occur with
+ * IPMI
+ */
struct si_sm_io io;
int (*io_setup)(struct smi_info *info);
void (*io_cleanup)(struct smi_info *info);
int (*irq_setup)(struct smi_info *info);
void (*irq_cleanup)(struct smi_info *info);
unsigned int io_size;
- char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
+ enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
void (*addr_source_cleanup)(struct smi_info *info);
void *addr_source_data;
- /* Per-OEM handler, called from handle_flags().
- Returns 1 when handle_flags() needs to be re-run
- or 0 indicating it set si_state itself.
- */
+ /*
+ * Per-OEM handler, called from handle_flags(). Returns 1
+ * when handle_flags() needs to be re-run or 0 indicating it
+ * set si_state itself.
+ */
int (*oem_data_avail_handler)(struct smi_info *smi_info);
- /* Flags from the last GET_MSG_FLAGS command, used when an ATTN
- is set to hold the flags until we are done handling everything
- from the flags. */
+ /*
+ * Flags from the last GET_MSG_FLAGS command, used when an ATTN
+ * is set to hold the flags until we are done handling everything
+ * from the flags.
+ */
#define RECEIVE_MSG_AVAIL 0x01
#define EVENT_MSG_BUFFER_FULL 0x02
#define WDT_PRE_TIMEOUT_INT 0x08
#define OEM1_DATA_AVAIL 0x40
#define OEM2_DATA_AVAIL 0x80
#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \
- OEM1_DATA_AVAIL | \
- OEM2_DATA_AVAIL)
+ OEM1_DATA_AVAIL | \
+ OEM2_DATA_AVAIL)
unsigned char msg_flags;
- /* If set to true, this will request events the next time the
- state machine is idle. */
+ /* Does the BMC have an event buffer? */
+ char has_event_buffer;
+
+ /*
+ * If set to true, this will request events the next time the
+ * state machine is idle.
+ */
atomic_t req_events;
- /* If true, run the state machine to completion on every send
- call. Generally used after a panic to make sure stuff goes
- out. */
+ /*
+ * If true, run the state machine to completion on every send
+ * call. Generally used after a panic to make sure stuff goes
+ * out.
+ */
int run_to_completion;
/* The I/O port of an SI interface. */
int port;
- /* The space between start addresses of the two ports. For
- instance, if the first port is 0xca2 and the spacing is 4, then
- the second port is 0xca6. */
+ /*
+ * The space between start addresses of the two ports. For
+ * instance, if the first port is 0xca2 and the spacing is 4, then
+ * the second port is 0xca6.
+ */
unsigned int spacing;
/* zero if no irq; */
/* Used to gracefully stop the timer without race conditions. */
atomic_t stop_operation;
- /* The driver will disable interrupts when it gets into a
- situation where it cannot handle messages due to lack of
- memory. Once that situation clears up, it will re-enable
- interrupts. */
+ /*
+ * The driver will disable interrupts when it gets into a
+ * situation where it cannot handle messages due to lack of
+ * memory. Once that situation clears up, it will re-enable
+ * interrupts.
+ */
int interrupt_disabled;
/* From the get device id response... */
struct device *dev;
struct platform_device *pdev;
- /* True if we allocated the device, false if it came from
- * someplace else (like PCI). */
+ /*
+ * True if we allocated the device, false if it came from
+ * someplace else (like PCI).
+ */
int dev_registered;
/* Slave address, could be reported from DMI. */
unsigned char slave_addr;
/* Counters and things for the proc filesystem. */
- spinlock_t count_lock;
- unsigned long short_timeouts;
- unsigned long long_timeouts;
- unsigned long timeout_restarts;
- unsigned long idles;
- unsigned long interrupts;
- unsigned long attentions;
- unsigned long flag_fetches;
- unsigned long hosed_count;
- unsigned long complete_transactions;
- unsigned long events;
- unsigned long watchdog_pretimeouts;
- unsigned long incoming_messages;
-
- struct task_struct *thread;
+ atomic_t stats[SI_NUM_STATS];
+
+ struct task_struct *thread;
struct list_head link;
};
+#define smi_inc_stat(smi, stat) \
+ atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
+#define smi_get_stat(smi, stat) \
+ ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
+
#define SI_MAX_PARMS 4
static int force_kipmid[SI_MAX_PARMS];
static int num_force_kipmid;
+static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static int num_max_busy_us;
+
static int unload_when_empty = 1;
+static int add_smi(struct smi_info *smi);
static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
-static int register_xaction_notifier(struct notifier_block * nb)
+static int register_xaction_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(&xaction_notifier_list, nb);
}
struct ipmi_smi_msg *msg)
{
/* Deliver the message to the upper layer with the lock
- released. */
- spin_unlock(&(smi_info->si_lock));
- ipmi_smi_msg_received(smi_info->intf, msg);
- spin_lock(&(smi_info->si_lock));
+ released. */
+
+ if (smi_info->run_to_completion) {
+ ipmi_smi_msg_received(smi_info->intf, msg);
+ } else {
+ spin_unlock(&(smi_info->si_lock));
+ ipmi_smi_msg_received(smi_info->intf, msg);
+ spin_lock(&(smi_info->si_lock));
+ }
}
static void return_hosed_msg(struct smi_info *smi_info, int cCode)
struct timeval t;
#endif
- /* No need to save flags, we aleady have interrupts off and we
- already hold the SMI lock. */
- spin_lock(&(smi_info->msg_lock));
+ /*
+ * No need to save flags, we aleady have interrupts off and we
+ * already hold the SMI lock.
+ */
+ if (!smi_info->run_to_completion)
+ spin_lock(&(smi_info->msg_lock));
/* Pick the high priority queue first. */
if (!list_empty(&(smi_info->hp_xmit_msgs))) {
link);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
err = atomic_notifier_call_chain(&xaction_notifier_list,
0, smi_info);
smi_info->si_sm,
smi_info->curr_msg->data,
smi_info->curr_msg->data_size);
- if (err) {
+ if (err)
return_hosed_msg(smi_info, err);
- }
rv = SI_SM_CALL_WITHOUT_DELAY;
}
- out:
- spin_unlock(&(smi_info->msg_lock));
+ out:
+ if (!smi_info->run_to_completion)
+ spin_unlock(&(smi_info->msg_lock));
return rv;
}
{
unsigned char msg[2];
- /* If we are enabling interrupts, we have to tell the
- BMC to use them. */
+ /*
+ * If we are enabling interrupts, we have to tell the
+ * BMC to use them.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
smi_info->si_state = SI_ENABLE_INTERRUPTS1;
}
+static void start_disable_irq(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+
+ msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+ smi_info->si_state = SI_DISABLE_INTERRUPTS1;
+}
+
static void start_clear_flags(struct smi_info *smi_info)
{
unsigned char msg[3];
smi_info->si_state = SI_CLEARING_FLAGS;
}
-/* When we have a situtaion where we run out of memory and cannot
- allocate messages, we just leave them in the BMC and run the system
- polled until we can allocate some memory. Once we have some
- memory, we will re-enable the interrupt. */
+/*
+ * When we have a situtaion where we run out of memory and cannot
+ * allocate messages, we just leave them in the BMC and run the system
+ * polled until we can allocate some memory. Once we have some
+ * memory, we will re-enable the interrupt.
+ */
static inline void disable_si_irq(struct smi_info *smi_info)
{
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
- disable_irq_nosync(smi_info->irq);
+ start_disable_irq(smi_info);
smi_info->interrupt_disabled = 1;
+ if (!atomic_read(&smi_info->stop_operation))
+ mod_timer(&smi_info->si_timer,
+ jiffies + SI_TIMEOUT_JIFFIES);
}
}
static inline void enable_si_irq(struct smi_info *smi_info)
{
if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
- enable_irq(smi_info->irq);
+ start_enable_irq(smi_info);
smi_info->interrupt_disabled = 0;
}
}
retry:
if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
/* Watchdog pre-timeout */
- spin_lock(&smi_info->count_lock);
- smi_info->watchdog_pretimeouts++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, watchdog_pretimeouts);
start_clear_flags(smi_info);
smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
smi_info->curr_msg->data_size);
smi_info->si_state = SI_GETTING_EVENTS;
} else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
- smi_info->oem_data_avail_handler) {
+ smi_info->oem_data_avail_handler) {
if (smi_info->oem_data_avail_handler(smi_info))
goto retry;
- } else {
+ } else
smi_info->si_state = SI_NORMAL;
- }
}
static void handle_transaction_done(struct smi_info *smi_info)
struct timeval t;
do_gettimeofday(&t);
- printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
switch (smi_info->si_state) {
case SI_NORMAL:
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
deliver_recv_msg(smi_info, msg);
/* We got the flags from the SMI, now handle them. */
len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- /* Error fetching flags, just give up for
- now. */
+ /* Error fetching flags, just give up for now. */
smi_info->si_state = SI_NORMAL;
} else if (len < 4) {
- /* Hmm, no flags. That's technically illegal, but
- don't use uninitialized data. */
+ /*
+ * Hmm, no flags. That's technically illegal, but
+ * don't use uninitialized data.
+ */
smi_info->si_state = SI_NORMAL;
} else {
smi_info->msg_flags = msg[3];
smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
if (msg[2] != 0) {
/* Error clearing flags */
- printk(KERN_WARNING
- "ipmi_si: Error clearing flags: %2.2x\n",
- msg[2]);
+ dev_warn(smi_info->dev,
+ "Error clearing flags: %2.2x\n", msg[2]);
}
if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
start_enable_irq(smi_info);
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->events++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, events);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
smi_info->curr_msg->rsp,
IPMI_MAX_MSG_LENGTH);
- /* Do this here becase deliver_recv_msg() releases the
- lock, and a new message can be put in during the
- time the lock is released. */
+ /*
+ * Do this here becase deliver_recv_msg() releases the
+ * lock, and a new message can be put in during the
+ * time the lock is released.
+ */
msg = smi_info->curr_msg;
smi_info->curr_msg = NULL;
if (msg->rsp[2] != 0) {
smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
handle_flags(smi_info);
} else {
- spin_lock(&smi_info->count_lock);
- smi_info->incoming_messages++;
- spin_unlock(&smi_info->count_lock);
-
- /* Do this before we deliver the message
- because delivering the message releases the
- lock and something else can mess with the
- state. */
+ smi_inc_stat(smi_info, incoming_messages);
+
+ /*
+ * Do this before we deliver the message
+ * because delivering the message releases the
+ * lock and something else can mess with the
+ * state.
+ */
handle_flags(smi_info);
deliver_recv_msg(smi_info, msg);
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed get, using polled mode.\n");
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed get, using polled mode.\n");
smi_info->si_state = SI_NORMAL;
} else {
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
- msg[2] = msg[3] | 1; /* enable msg queue int */
+ msg[2] = (msg[3] |
+ IPMI_BMC_RCV_MSG_INTR |
+ IPMI_BMC_EVT_MSG_INTR);
smi_info->handlers->start_transaction(
smi_info->si_sm, msg, 3);
smi_info->si_state = SI_ENABLE_INTERRUPTS2;
/* We got the flags from the SMI, now handle them. */
smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
+ if (msg[2] != 0)
+ dev_warn(smi_info->dev, "Could not enable interrupts"
+ ", failed set, using polled mode.\n");
+ else
+ smi_info->interrupt_disabled = 0;
+ smi_info->si_state = SI_NORMAL;
+ break;
+ }
+
+ case SI_DISABLE_INTERRUPTS1:
+ {
+ unsigned char msg[4];
+
+ /* We got the flags from the SMI, now handle them. */
+ smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
+ if (msg[2] != 0) {
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed get.\n");
+ smi_info->si_state = SI_NORMAL;
+ } else {
+ msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = (msg[3] &
+ ~(IPMI_BMC_RCV_MSG_INTR |
+ IPMI_BMC_EVT_MSG_INTR));
+ smi_info->handlers->start_transaction(
+ smi_info->si_sm, msg, 3);
+ smi_info->si_state = SI_DISABLE_INTERRUPTS2;
+ }
+ break;
+ }
+
+ case SI_DISABLE_INTERRUPTS2:
+ {
+ unsigned char msg[4];
+
+ /* We got the flags from the SMI, now handle them. */
+ smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
if (msg[2] != 0) {
- printk(KERN_WARNING
- "ipmi_si: Could not enable interrupts"
- ", failed set, using polled mode.\n");
+ dev_warn(smi_info->dev, "Could not disable interrupts"
+ ", failed set.\n");
}
smi_info->si_state = SI_NORMAL;
break;
}
}
-/* Called on timeouts and events. Timeouts should pass the elapsed
- time, interrupts should pass in zero. */
+/*
+ * Called on timeouts and events. Timeouts should pass the elapsed
+ * time, interrupts should pass in zero. Must be called with
+ * si_lock held and interrupts disabled.
+ */
static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
int time)
{
enum si_sm_result si_sm_result;
restart:
- /* There used to be a loop here that waited a little while
- (around 25us) before giving up. That turned out to be
- pointless, the minimum delays I was seeing were in the 300us
- range, which is far too long to wait in an interrupt. So
- we just run until the state machine tells us something
- happened or it needs a delay. */
+ /*
+ * There used to be a loop here that waited a little while
+ * (around 25us) before giving up. That turned out to be
+ * pointless, the minimum delays I was seeing were in the 300us
+ * range, which is far too long to wait in an interrupt. So
+ * we just run until the state machine tells us something
+ * happened or it needs a delay.
+ */
si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
time = 0;
while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
- {
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- if (si_sm_result == SI_SM_TRANSACTION_COMPLETE)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->complete_transactions++;
- spin_unlock(&smi_info->count_lock);
+ if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
+ smi_inc_stat(smi_info, complete_transactions);
handle_transaction_done(smi_info);
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
- }
- else if (si_sm_result == SI_SM_HOSED)
- {
- spin_lock(&smi_info->count_lock);
- smi_info->hosed_count++;
- spin_unlock(&smi_info->count_lock);
+ } else if (si_sm_result == SI_SM_HOSED) {
+ smi_inc_stat(smi_info, hosed_count);
- /* Do the before return_hosed_msg, because that
- releases the lock. */
+ /*
+ * Do the before return_hosed_msg, because that
+ * releases the lock.
+ */
smi_info->si_state = SI_NORMAL;
if (smi_info->curr_msg != NULL) {
- /* If we were handling a user message, format
- a response to send to the upper layer to
- tell it about the error. */
+ /*
+ * If we were handling a user message, format
+ * a response to send to the upper layer to
+ * tell it about the error.
+ */
return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
}
si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
}
- /* We prefer handling attn over new messages. */
- if (si_sm_result == SI_SM_ATTN)
- {
+ /*
+ * We prefer handling attn over new messages. But don't do
+ * this if there is not yet an upper layer to handle anything.
+ */
+ if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
unsigned char msg[2];
- spin_lock(&smi_info->count_lock);
- smi_info->attentions++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, attentions);
- /* Got a attn, send down a get message flags to see
- what's causing it. It would be better to handle
- this in the upper layer, but due to the way
- interrupts work with the SMI, that's not really
- possible. */
+ /*
+ * Got a attn, send down a get message flags to see
+ * what's causing it. It would be better to handle
+ * this in the upper layer, but due to the way
+ * interrupts work with the SMI, that's not really
+ * possible.
+ */
msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
msg[1] = IPMI_GET_MSG_FLAGS_CMD;
/* If we are currently idle, try to start the next message. */
if (si_sm_result == SI_SM_IDLE) {
- spin_lock(&smi_info->count_lock);
- smi_info->idles++;
- spin_unlock(&smi_info->count_lock);
+ smi_inc_stat(smi_info, idles);
si_sm_result = start_next_msg(smi_info);
if (si_sm_result != SI_SM_IDLE)
goto restart;
- }
+ }
if ((si_sm_result == SI_SM_IDLE)
- && (atomic_read(&smi_info->req_events)))
- {
- /* We are idle and the upper layer requested that I fetch
- events, so do so. */
+ && (atomic_read(&smi_info->req_events))) {
+ /*
+ * We are idle and the upper layer requested that I fetch
+ * events, so do so.
+ */
atomic_set(&smi_info->req_events, 0);
smi_info->curr_msg = ipmi_alloc_smi_msg();
return;
}
- spin_lock_irqsave(&(smi_info->msg_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
+ mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+
+ if (smi_info->thread)
+ wake_up_process(smi_info->thread);
+
if (smi_info->run_to_completion) {
- /* If we are running to completion, then throw it in
- the list and run transactions until everything is
- clear. Priority doesn't matter here. */
+ /*
+ * If we are running to completion, then throw it in
+ * the list and run transactions until everything is
+ * clear. Priority doesn't matter here.
+ */
+
+ /*
+ * Run to completion means we are single-threaded, no
+ * need for locks.
+ */
list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- /* We have to release the msg lock and claim the smi
- lock in this case, because of race conditions. */
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
result = smi_event_handler(smi_info, 0);
while (result != SI_SM_IDLE) {
udelay(SI_SHORT_TIMEOUT_USEC);
result = smi_event_handler(smi_info,
SI_SHORT_TIMEOUT_USEC);
}
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return;
- } else {
- if (priority > 0) {
- list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
- } else {
- list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
- }
}
- spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
- spin_lock_irqsave(&(smi_info->si_lock), flags);
- if ((smi_info->si_state == SI_NORMAL)
- && (smi_info->curr_msg == NULL))
- {
+ spin_lock_irqsave(&smi_info->msg_lock, flags);
+ if (priority > 0)
+ list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
+ else
+ list_add_tail(&msg->link, &smi_info->xmit_msgs);
+ spin_unlock_irqrestore(&smi_info->msg_lock, flags);
+
+ spin_lock_irqsave(&smi_info->si_lock, flags);
+ if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
start_next_msg(smi_info);
- }
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
static void set_run_to_completion(void *send_info, int i_run_to_completion)
{
struct smi_info *smi_info = send_info;
enum si_sm_result result;
- unsigned long flags;
-
- spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_info->run_to_completion = i_run_to_completion;
if (i_run_to_completion) {
SI_SHORT_TIMEOUT_USEC);
}
}
+}
- spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+/*
+ * Use -1 in the nsec value of the busy waiting timespec to tell that
+ * we are spinning in kipmid looking for something and not delaying
+ * between checks
+ */
+static inline void ipmi_si_set_not_busy(struct timespec *ts)
+{
+ ts->tv_nsec = -1;
}
+static inline int ipmi_si_is_busy(struct timespec *ts)
+{
+ return ts->tv_nsec != -1;
+}
+
+static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
+ const struct smi_info *smi_info,
+ struct timespec *busy_until)
+{
+ unsigned int max_busy_us = 0;
+ if (smi_info->intf_num < num_max_busy_us)
+ max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
+ if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
+ ipmi_si_set_not_busy(busy_until);
+ else if (!ipmi_si_is_busy(busy_until)) {
+ getnstimeofday(busy_until);
+ timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+ } else {
+ struct timespec now;
+ getnstimeofday(&now);
+ if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+ ipmi_si_set_not_busy(busy_until);
+ return 0;
+ }
+ }
+ return 1;
+}
+
+
+/*
+ * A busy-waiting loop for speeding up IPMI operation.
+ *
+ * Lousy hardware makes this hard. This is only enabled for systems
+ * that are not BT and do not have interrupts. It starts spinning
+ * when an operation is complete or until max_busy tells it to stop
+ * (if that is enabled). See the paragraph on kimid_max_busy_us in
+ * Documentation/IPMI.txt for details.
+ */
static int ipmi_thread(void *data)
{
struct smi_info *smi_info = data;
unsigned long flags;
enum si_sm_result smi_result;
+ struct timespec busy_until;
+ ipmi_si_set_not_busy(&busy_until);
set_user_nice(current, 19);
while (!kthread_should_stop()) {
+ int busy_wait;
+
spin_lock_irqsave(&(smi_info->si_lock), flags);
smi_result = smi_event_handler(smi_info, 0);
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
- if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
- /* do nothing */
- }
- else if (smi_result == SI_SM_CALL_WITH_DELAY)
+ busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
+ &busy_until);
+ if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+ ; /* do nothing */
+ else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
schedule();
+ else if (smi_result == SI_SM_IDLE)
+ schedule_timeout_interruptible(100);
else
- schedule_timeout_interruptible(1);
+ schedule_timeout_interruptible(0);
}
return 0;
}
static void poll(void *send_info)
{
struct smi_info *smi_info = send_info;
+ unsigned long flags;
/*
* Make sure there is some delay in the poll loop so we can
* drive time forward and timeout things.
*/
udelay(10);
+ spin_lock_irqsave(&smi_info->si_lock, flags);
smi_event_handler(smi_info, 10);
+ spin_unlock_irqrestore(&smi_info->si_lock, flags);
}
static void request_events(void *send_info)
{
struct smi_info *smi_info = send_info;
- if (atomic_read(&smi_info->stop_operation))
+ if (atomic_read(&smi_info->stop_operation) ||
+ !smi_info->has_event_buffer)
return;
atomic_set(&smi_info->req_events, 1);
unsigned long flags;
unsigned long jiffies_now;
long time_diff;
+ long timeout;
#ifdef DEBUG_TIMING
struct timeval t;
#endif
- if (atomic_read(&smi_info->stop_operation))
- return;
-
spin_lock_irqsave(&(smi_info->si_lock), flags);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
jiffies_now = jiffies;
time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
- smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
- goto do_add_timer;
+ timeout = jiffies + SI_TIMEOUT_JIFFIES;
+ smi_inc_stat(smi_info, long_timeouts);
+ goto do_mod_timer;
}
- /* If the state machine asks for a short delay, then shorten
- the timer timeout. */
+ /*
+ * If the state machine asks for a short delay, then shorten
+ * the timer timeout.
+ */
if (smi_result == SI_SM_CALL_WITH_DELAY) {
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->short_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
- smi_info->si_timer.expires = jiffies + 1;
+ smi_inc_stat(smi_info, short_timeouts);
+ timeout = jiffies + 1;
} else {
- spin_lock_irqsave(&smi_info->count_lock, flags);
- smi_info->long_timeouts++;
- spin_unlock_irqrestore(&smi_info->count_lock, flags);
- smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
+ smi_inc_stat(smi_info, long_timeouts);
+ timeout = jiffies + SI_TIMEOUT_JIFFIES;
}
- do_add_timer:
- add_timer(&(smi_info->si_timer));
+ do_mod_timer:
+ if (smi_result != SI_SM_IDLE)
+ mod_timer(&(smi_info->si_timer), timeout);
}
static irqreturn_t si_irq_handler(int irq, void *data)
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
-
- if (atomic_read(&smi_info->stop_operation))
- goto out;
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
- printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
+ printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
- out:
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return IRQ_HANDLED;
}
new_smi->intf = intf;
+ /* Try to claim any interrupts. */
+ if (new_smi->irq_setup)
+ new_smi->irq_setup(new_smi);
+
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
new_smi->last_timeout_jiffies = jiffies;
* The BT interface is efficient enough to not need a thread,
* and there is no need for a thread if we have interrupts.
*/
- else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
+ else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
enable = 1;
if (enable) {
new_smi->thread = kthread_run(ipmi_thread, new_smi,
"kipmi%d", new_smi->intf_num);
if (IS_ERR(new_smi->thread)) {
- printk(KERN_NOTICE "ipmi_si_intf: Could not start"
- " kernel thread due to error %ld, only using"
- " timers to drive the interface\n",
- PTR_ERR(new_smi->thread));
+ dev_notice(new_smi->dev, "Could not start"
+ " kernel thread due to error %ld, only using"
+ " timers to drive the interface\n",
+ PTR_ERR(new_smi->thread));
new_smi->thread = NULL;
}
}
atomic_set(&smi_info->req_events, 0);
}
-static struct ipmi_smi_handlers handlers =
-{
+static struct ipmi_smi_handlers handlers = {
.owner = THIS_MODULE,
.start_processing = smi_start_processing,
.sender = sender,
.poll = poll,
};
-/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
- a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
+/*
+ * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
+ * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS.
+ */
static LIST_HEAD(smi_infos);
static DEFINE_MUTEX(smi_infos_lock);
static int smi_num; /* Used to sequence the SMIs */
#define DEFAULT_REGSPACING 1
+#define DEFAULT_REGSIZE 1
static int si_trydefaults = 1;
static char *si_type[SI_MAX_PARMS];
#define MAX_SI_TYPE_STR 30
static char si_type_str[MAX_SI_TYPE_STR];
static unsigned long addrs[SI_MAX_PARMS];
-static int num_addrs;
+static unsigned int num_addrs;
static unsigned int ports[SI_MAX_PARMS];
-static int num_ports;
+static unsigned int num_ports;
static int irqs[SI_MAX_PARMS];
-static int num_irqs;
+static unsigned int num_irqs;
static int regspacings[SI_MAX_PARMS];
-static int num_regspacings;
+static unsigned int num_regspacings;
static int regsizes[SI_MAX_PARMS];
-static int num_regsizes;
+static unsigned int num_regsizes;
static int regshifts[SI_MAX_PARMS];
-static int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS];
-static int num_slave_addrs;
+static unsigned int num_regshifts;
+static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
+static unsigned int num_slave_addrs;
#define IPMI_IO_ADDR_SPACE 0
#define IPMI_MEM_ADDR_SPACE 1
" interface separated by commas. The types are 'kcs',"
" 'smic', and 'bt'. For example si_type=kcs,bt will set"
" the first interface to kcs and the second to bt");
-module_param_array(addrs, long, &num_addrs, 0);
+module_param_array(addrs, ulong, &num_addrs, 0);
MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is in memory. Otherwise, set it to zero or leave"
" it blank.");
-module_param_array(ports, int, &num_ports, 0);
+module_param_array(ports, uint, &num_ports, 0);
MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
" addresses separated by commas. Only use if an interface"
" is a port. Otherwise, set it to zero or leave"
MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
" specified or found, default is 1. Setting to 0"
" is useful for hot add of devices using hotmod.");
+module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
+MODULE_PARM_DESC(kipmid_max_busy_us,
+ "Max time (in microseconds) to busy-wait for IPMI data before"
+ " sleeping. 0 (default) means to wait forever. Set to 100-500"
+ " if kipmid is using up a lot of CPU time.");
static void std_irq_cleanup(struct smi_info *info)
if (info->si_type == SI_BT) {
rv = request_irq(info->irq,
si_bt_irq_handler,
- IRQF_DISABLED,
+ IRQF_SHARED | IRQF_DISABLED,
DEVICE_NAME,
info);
if (!rv)
} else
rv = request_irq(info->irq,
si_irq_handler,
- IRQF_DISABLED,
+ IRQF_SHARED | IRQF_DISABLED,
DEVICE_NAME,
info);
if (rv) {
- printk(KERN_WARNING
- "ipmi_si: %s unable to claim interrupt %d,"
- " running polled\n",
- DEVICE_NAME, info->irq);
+ dev_warn(info->dev, "%s unable to claim interrupt %d,"
+ " running polled\n",
+ DEVICE_NAME, info->irq);
info->irq = 0;
} else {
info->irq_cleanup = std_irq_cleanup;
- printk(" Using irq %d\n", info->irq);
+ dev_info(info->dev, "Using irq %d\n", info->irq);
}
return rv;
int idx;
if (addr) {
- for (idx = 0; idx < info->io_size; idx++) {
+ for (idx = 0; idx < info->io_size; idx++)
release_region(addr + idx * info->io.regspacing,
info->io.regsize);
- }
}
}
info->io_cleanup = port_cleanup;
- /* Figure out the actual inb/inw/inl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual inb/inw/inl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = port_inb;
info->io.outputb = port_outl;
break;
default:
- printk("ipmi_si: Invalid register size: %d\n",
- info->io.regsize);
+ dev_warn(info->dev, "Invalid register size: %d\n",
+ info->io.regsize);
return -EINVAL;
}
- /* Some BIOSes reserve disjoint I/O regions in their ACPI
+ /*
+ * Some BIOSes reserve disjoint I/O regions in their ACPI
* tables. This causes problems when trying to register the
* entire I/O region. Therefore we must register each I/O
* port separately.
*/
- for (idx = 0; idx < info->io_size; idx++) {
+ for (idx = 0; idx < info->io_size; idx++) {
if (request_region(addr + idx * info->io.regspacing,
info->io.regsize, DEVICE_NAME) == NULL) {
/* Undo allocations */
info->io_cleanup = mem_cleanup;
- /* Figure out the actual readb/readw/readl/etc routine to use based
- upon the register size. */
+ /*
+ * Figure out the actual readb/readw/readl/etc routine to use based
+ * upon the register size.
+ */
switch (info->io.regsize) {
case 1:
info->io.inputb = intf_mem_inb;
break;
#endif
default:
- printk("ipmi_si: Invalid register size: %d\n",
- info->io.regsize);
+ dev_warn(info->dev, "Invalid register size: %d\n",
+ info->io.regsize);
return -EINVAL;
}
- /* Calculate the total amount of memory to claim. This is an
+ /*
+ * Calculate the total amount of memory to claim. This is an
* unusual looking calculation, but it avoids claiming any
* more memory than it has to. It will claim everything
* between the first address to the end of the last full
- * register. */
+ * register.
+ */
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
regsize = 1;
regshift = 0;
irq = 0;
- ipmb = 0x20;
+ ipmb = 0; /* Choose the default if not specified */
next = strchr(curr, ':');
if (next) {
goto out;
}
- info->addr_source = "hotmod";
+ info->addr_source = SI_HOTMOD;
info->si_type = si_type;
info->io.addr_data = addr;
info->io.addr_type = addr_space;
info->irq_setup = std_irq_setup;
info->slave_addr = ipmb;
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
} else {
/* remove */
struct smi_info *e, *tmp_e;
if (!info)
return;
- info->addr_source = "hardcoded";
+ info->addr_source = SI_HARDCODED;
+ printk(KERN_INFO PFX "probing via hardcoded address\n");
if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
info->si_type = SI_KCS;
} else if (strcmp(si_type[i], "bt") == 0) {
info->si_type = SI_BT;
} else {
- printk(KERN_WARNING
- "ipmi_si: Interface type specified "
+ printk(KERN_WARNING PFX "Interface type specified "
"for interface %d, was invalid: %s\n",
i, si_type[i]);
kfree(info);
info->io.addr_data = addrs[i];
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else {
- printk(KERN_WARNING
- "ipmi_si: Interface type specified "
- "for interface %d, "
- "but port and address were not set or "
- "set to zero.\n", i);
+ printk(KERN_WARNING PFX "Interface type specified "
+ "for interface %d, but port and address were "
+ "not set or set to zero.\n", i);
kfree(info);
continue;
}
info->irq = irqs[i];
if (info->irq)
info->irq_setup = std_irq_setup;
+ info->slave_addr = slave_addrs[i];
- try_smi_init(info);
+ if (!add_smi(info))
+ if (try_smi_init(info))
+ cleanup_one_si(info);
}
}
#include <linux/acpi.h>
-/* Once we get an ACPI failure, we don't try any more, because we go
- through the tables sequentially. Once we don't find a table, there
- are no more. */
+/*
+ * Once we get an ACPI failure, we don't try any more, because we go
+ * through the tables sequentially. Once we don't find a table, there
+ * are no more.
+ */
static int acpi_failure;
/* For GPE-type interrupts. */
spin_lock_irqsave(&(smi_info->si_lock), flags);
- spin_lock(&smi_info->count_lock);
- smi_info->interrupts++;
- spin_unlock(&smi_info->count_lock);
-
- if (atomic_read(&smi_info->stop_operation))
- goto out;
+ smi_inc_stat(smi_info, interrupts);
#ifdef DEBUG_TIMING
do_gettimeofday(&t);
printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
#endif
smi_event_handler(smi_info, 0);
- out:
spin_unlock_irqrestore(&(smi_info->si_lock), flags);
return ACPI_INTERRUPT_HANDLED;
&ipmi_acpi_gpe,
info);
if (status != AE_OK) {
- printk(KERN_WARNING
- "ipmi_si: %s unable to claim ACPI GPE %d,"
- " running polled\n",
- DEVICE_NAME, info->irq);
+ dev_warn(info->dev, "%s unable to claim ACPI GPE %d,"
+ " running polled\n", DEVICE_NAME, info->irq);
info->irq = 0;
return -EINVAL;
} else {
info->irq_cleanup = acpi_gpe_irq_cleanup;
- printk(" Using ACPI GPE %d\n", info->irq);
+ dev_info(info->dev, "Using ACPI GPE %d\n", info->irq);
return 0;
}
}
/*
* Defined at
- * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
+ * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/
+ * Docs/TechPapers/IA64/hpspmi.pdf
*/
struct SPMITable {
s8 Signature[4];
*/
u8 InterruptType;
- /* If bit 0 of InterruptType is set, then this is the SCI
- interrupt in the GPEx_STS register. */
+ /*
+ * If bit 0 of InterruptType is set, then this is the SCI
+ * interrupt in the GPEx_STS register.
+ */
u8 GPE;
s16 Reserved;
- /* If bit 1 of InterruptType is set, then this is the I/O
- APIC/SAPIC interrupt. */
+ /*
+ * If bit 1 of InterruptType is set, then this is the I/O
+ * APIC/SAPIC interrupt.
+ */
u32 GlobalSystemInterrupt;
/* The actual register address. */
s8 spmi_id[1]; /* A '\0' terminated array starts here. */
};
-static __devinit int try_init_acpi(struct SPMITable *spmi)
+static __devinit int try_init_spmi(struct SPMITable *spmi)
{
struct smi_info *info;
u8 addr_space;
if (spmi->IPMIlegacy != 1) {
- printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
- return -ENODEV;
+ printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
+ return -ENODEV;
}
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
+ printk(KERN_ERR PFX "Could not allocate SI data (3)\n");
return -ENOMEM;
}
- info->addr_source = "ACPI";
+ info->addr_source = SI_SPMI;
+ printk(KERN_INFO PFX "probing via SPMI\n");
/* Figure out the interface type. */
- switch (spmi->InterfaceType)
- {
+ switch (spmi->InterfaceType) {
case 1: /* KCS */
info->si_type = SI_KCS;
break;
info->si_type = SI_BT;
break;
default:
- printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
- spmi->InterfaceType);
+ printk(KERN_INFO PFX "Unknown ACPI/SPMI SI type %d\n",
+ spmi->InterfaceType);
kfree(info);
return -EIO;
}
if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
info->io_setup = mem_setup;
- info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
info->io_setup = port_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else {
kfree(info);
- printk("ipmi_si: Unknown ACPI I/O Address type\n");
+ printk(KERN_WARNING PFX "Unknown ACPI I/O Address type\n");
return -EIO;
}
info->io.addr_data = spmi->addr.address;
- try_smi_init(info);
+ add_smi(info);
return 0;
}
-static __devinit void acpi_find_bmc(void)
+static __devinit void spmi_find_bmc(void)
{
acpi_status status;
struct SPMITable *spmi;
if (status != AE_OK)
return;
- try_init_acpi(spmi);
+ try_init_spmi(spmi);
}
}
+
+static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct acpi_device *acpi_dev;
+ struct smi_info *info;
+ struct resource *res;
+ acpi_handle handle;
+ acpi_status status;
+ unsigned long long tmp;
+
+ acpi_dev = pnp_acpi_device(dev);
+ if (!acpi_dev)
+ return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->addr_source = SI_ACPI;
+ printk(KERN_INFO PFX "probing via ACPI\n");
+
+ handle = acpi_dev->handle;
+
+ /* _IFT tells us the interface type: KCS, BT, etc */
+ status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ goto err_free;
+
+ switch (tmp) {
+ case 1:
+ info->si_type = SI_KCS;
+ break;
+ case 2:
+ info->si_type = SI_SMIC;
+ break;
+ case 3:
+ info->si_type = SI_BT;
+ break;
+ default:
+ dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
+ goto err_free;
+ }
+
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (res) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res) {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+ }
+ if (!res) {
+ dev_err(&dev->dev, "no I/O or memory address\n");
+ goto err_free;
+ }
+ info->io.addr_data = res->start;
+
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ /* If _GPE exists, use it; otherwise use standard interrupts */
+ status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
+ if (ACPI_SUCCESS(status)) {
+ info->irq = tmp;
+ info->irq_setup = acpi_gpe_irq_setup;
+ } else if (pnp_irq_valid(dev, 0)) {
+ info->irq = pnp_irq(dev, 0);
+ info->irq_setup = std_irq_setup;
+ }
+
+ info->dev = &dev->dev;
+ pnp_set_drvdata(dev, info);
+
+ dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
+ res, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ return add_smi(info);
+
+err_free:
+ kfree(info);
+ return -EINVAL;
+}
+
+static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
+{
+ struct smi_info *info = pnp_get_drvdata(dev);
+
+ cleanup_one_si(info);
+}
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ {"IPI0001", 0},
+ {"", 0},
+};
+
+static struct pnp_driver ipmi_pnp_driver = {
+ .name = DEVICE_NAME,
+ .probe = ipmi_pnp_probe,
+ .remove = __devexit_p(ipmi_pnp_remove),
+ .id_table = pnp_dev_table,
+};
#endif
#ifdef CONFIG_DMI
-struct dmi_ipmi_data
-{
+struct dmi_ipmi_data {
u8 type;
u8 addr_space;
unsigned long base_addr;
u8 slave_addr;
};
-static int __devinit decode_dmi(struct dmi_header *dm,
+static int __devinit decode_dmi(const struct dmi_header *dm,
struct dmi_ipmi_data *dmi)
{
- u8 *data = (u8 *)dm;
+ const u8 *data = (const u8 *)dm;
unsigned long base_addr;
u8 reg_spacing;
u8 len = dm->length;
/* I/O */
base_addr &= 0xFFFE;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
- }
- else {
+ } else
/* Memory */
dmi->addr_space = IPMI_MEM_ADDR_SPACE;
- }
+
/* If bit 4 of byte 0x10 is set, then the lsb for the address
is odd. */
dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
/* The top two bits of byte 0x10 hold the register spacing. */
reg_spacing = (data[0x10] & 0xC0) >> 6;
- switch(reg_spacing){
+ switch (reg_spacing) {
case 0x00: /* Byte boundaries */
dmi->offset = 1;
break;
}
} else {
/* Old DMI spec. */
- /* Note that technically, the lower bit of the base
+ /*
+ * Note that technically, the lower bit of the base
* address should be 1 if the address is I/O and 0 if
* the address is in memory. So many systems get that
* wrong (and all that I have seen are I/O) so we just
* ignore that bit and assume I/O. Systems that use
- * memory should use the newer spec, anyway. */
+ * memory should use the newer spec, anyway.
+ */
dmi->base_addr = base_addr & 0xfffe;
dmi->addr_space = IPMI_IO_ADDR_SPACE;
dmi->offset = 1;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
- printk(KERN_ERR
- "ipmi_si: Could not allocate SI data\n");
+ printk(KERN_ERR PFX "Could not allocate SI data\n");
return;
}
- info->addr_source = "SMBIOS";
+ info->addr_source = SI_SMBIOS;
+ printk(KERN_INFO PFX "probing via SMBIOS\n");
switch (ipmi_data->type) {
case 0x01: /* KCS */
info->si_type = SI_BT;
break;
default:
+ kfree(info);
return;
}
default:
kfree(info);
- printk(KERN_WARNING
- "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
+ printk(KERN_WARNING PFX "Unknown SMBIOS I/O Address type: %d\n",
ipmi_data->addr_space);
return;
}
if (info->irq)
info->irq_setup = std_irq_setup;
- try_smi_init(info);
+ add_smi(info);
}
static void __devinit dmi_find_bmc(void)
{
- struct dmi_device *dev = NULL;
+ const struct dmi_device *dev = NULL;
struct dmi_ipmi_data data;
int rv;
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
memset(&data, 0, sizeof(data));
- rv = decode_dmi((struct dmi_header *) dev->device_data, &data);
+ rv = decode_dmi((const struct dmi_header *) dev->device_data,
+ &data);
if (!rv)
try_init_dmi(&data);
}
int rv;
int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
struct smi_info *info;
- int first_reg_offset = 0;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
- info->addr_source = "PCI";
+ info->addr_source = SI_PCI;
+ dev_info(&pdev->dev, "probing via PCI");
switch (class_type) {
case PCI_ERMC_CLASSCODE_TYPE_SMIC:
default:
kfree(info);
- printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
- pci_name(pdev), class_type);
+ dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type);
return -ENOMEM;
}
rv = pci_enable_device(pdev);
if (rv) {
- printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "couldn't enable PCI device\n");
kfree(info);
return rv;
}
info->addr_source_cleanup = ipmi_pci_cleanup;
info->addr_source_data = pdev;
- if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID)
- first_reg_offset = 1;
-
if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
info->io_setup = port_setup;
info->io.addr_type = IPMI_IO_ADDR_SPACE;
info->irq_setup = std_irq_setup;
info->dev = &pdev->dev;
+ pci_set_drvdata(pdev, info);
+
+ dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
+ &pdev->resource[0], info->io.regsize, info->io.regspacing,
+ info->irq);
- return try_smi_init(info);
+ return add_smi(info);
}
static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
{
+ struct smi_info *info = pci_get_drvdata(pdev);
+ cleanup_one_si(info);
}
#ifdef CONFIG_PM
static struct pci_device_id ipmi_pci_devices[] = {
{ PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
- { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) }
+ { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
+ { 0, }
};
MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
static struct pci_driver ipmi_pci_driver = {
- .name = DEVICE_NAME,
- .id_table = ipmi_pci_devices,
- .probe = ipmi_pci_probe,
- .remove = __devexit_p(ipmi_pci_remove),
+ .name = DEVICE_NAME,
+ .id_table = ipmi_pci_devices,
+ .probe = ipmi_pci_probe,
+ .remove = __devexit_p(ipmi_pci_remove),
#ifdef CONFIG_PM
- .suspend = ipmi_pci_suspend,
- .resume = ipmi_pci_resume,
+ .suspend = ipmi_pci_suspend,
+ .resume = ipmi_pci_resume,
#endif
};
#endif /* CONFIG_PCI */
-static int try_get_dev_id(struct smi_info *smi_info)
+#ifdef CONFIG_PPC_OF
+static int __devinit ipmi_of_probe(struct of_device *dev,
+ const struct of_device_id *match)
{
- unsigned char msg[2];
- unsigned char *resp;
- unsigned long resp_len;
- enum si_sm_result smi_result;
- int rv = 0;
+ struct smi_info *info;
+ struct resource resource;
+ const int *regsize, *regspacing, *regshift;
+ struct device_node *np = dev->dev.of_node;
+ int ret;
+ int proplen;
- resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (!resp)
+ dev_info(&dev->dev, "probing via device tree\n");
+
+ ret = of_address_to_resource(np, 0, &resource);
+ if (ret) {
+ dev_warn(&dev->dev, PFX "invalid address from OF\n");
+ return ret;
+ }
+
+ regsize = of_get_property(np, "reg-size", &proplen);
+ if (regsize && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
+ return -EINVAL;
+ }
+
+ regspacing = of_get_property(np, "reg-spacing", &proplen);
+ if (regspacing && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
+ return -EINVAL;
+ }
+
+ regshift = of_get_property(np, "reg-shift", &proplen);
+ if (regshift && proplen != 4) {
+ dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
+ return -EINVAL;
+ }
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+ if (!info) {
+ dev_err(&dev->dev,
+ "could not allocate memory for OF probe\n");
return -ENOMEM;
+ }
- /* Do a Get Device ID command, since it comes back with some
- useful info. */
- msg[0] = IPMI_NETFN_APP_REQUEST << 2;
- msg[1] = IPMI_GET_DEVICE_ID_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+ info->si_type = (enum si_type) match->data;
+ info->addr_source = SI_DEVICETREE;
+ info->irq_setup = std_irq_setup;
+
+ if (resource.flags & IORESOURCE_IO) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+
+ info->io.addr_data = resource.start;
+
+ info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE;
+ info->io.regspacing = regspacing ? *regspacing : DEFAULT_REGSPACING;
+ info->io.regshift = regshift ? *regshift : 0;
+
+ info->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
+ info->dev = &dev->dev;
+
+ dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n",
+ info->io.addr_data, info->io.regsize, info->io.regspacing,
+ info->irq);
+
+ dev_set_drvdata(&dev->dev, info);
+
+ return add_smi(info);
+}
+
+static int __devexit ipmi_of_remove(struct of_device *dev)
+{
+ cleanup_one_si(dev_get_drvdata(&dev->dev));
+ return 0;
+}
+
+static struct of_device_id ipmi_match[] =
+{
+ { .type = "ipmi", .compatible = "ipmi-kcs",
+ .data = (void *)(unsigned long) SI_KCS },
+ { .type = "ipmi", .compatible = "ipmi-smic",
+ .data = (void *)(unsigned long) SI_SMIC },
+ { .type = "ipmi", .compatible = "ipmi-bt",
+ .data = (void *)(unsigned long) SI_BT },
+ {},
+};
+
+static struct of_platform_driver ipmi_of_platform_driver = {
+ .driver = {
+ .name = "ipmi",
+ .owner = THIS_MODULE,
+ .of_match_table = ipmi_match,
+ },
+ .probe = ipmi_of_probe,
+ .remove = __devexit_p(ipmi_of_remove),
+};
+#endif /* CONFIG_PPC_OF */
+
+static int wait_for_msg_done(struct smi_info *smi_info)
+{
+ enum si_sm_result smi_result;
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
- for (;;)
- {
+ for (;;) {
if (smi_result == SI_SM_CALL_WITH_DELAY ||
smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
schedule_timeout_uninterruptible(1);
smi_result = smi_info->handlers->event(
smi_info->si_sm, 100);
- }
- else if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
- {
+ } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
smi_result = smi_info->handlers->event(
smi_info->si_sm, 0);
- }
- else
+ } else
break;
}
- if (smi_result == SI_SM_HOSED) {
- /* We couldn't get the state machine to run, so whatever's at
- the port is probably not an IPMI SMI interface. */
- rv = -ENODEV;
+ if (smi_result == SI_SM_HOSED)
+ /*
+ * We couldn't get the state machine to run, so whatever's at
+ * the port is probably not an IPMI SMI interface.
+ */
+ return -ENODEV;
+
+ return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_DEVICE_ID_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv)
+ goto out;
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ /* Check and record info from the get device id, in case we need it. */
+ rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id);
+
+ out:
+ kfree(resp);
+ return rv;
+}
+
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from get"
+ " global enables command, the event buffer is not"
+ " enabled.\n");
goto out;
}
- /* Otherwise, we got some data. */
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
resp, IPMI_MAX_MSG_LENGTH);
- if (resp_len < 14) {
- /* That's odd, it should be longer. */
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING PFX "Invalid return from get global"
+ " enables command, cannot enable the event buffer.\n");
rv = -EINVAL;
goto out;
}
- if ((resp[1] != IPMI_GET_DEVICE_ID_CMD) || (resp[2] != 0)) {
- /* That's odd, it shouldn't be able to fail. */
- rv = -EINVAL;
+ if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+ /* buffer is already enabled, nothing to do. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING PFX "Error getting response from set"
+ " global, enables command, the event buffer is not"
+ " enabled.\n");
goto out;
}
- /* Record info from the get device id, in case we need it. */
- ipmi_demangle_device_id(resp+3, resp_len-3, &smi_info->device_id);
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING PFX "Invalid return from get global,"
+ "enables command, not enable the event buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0)
+ /*
+ * An error when setting the event buffer bit means
+ * that the event buffer is not supported.
+ */
+ rv = -ENOENT;
out:
kfree(resp);
return rv;
out += sprintf(out, "interrupts_enabled: %d\n",
smi->irq && !smi->interrupt_disabled);
- out += sprintf(out, "short_timeouts: %ld\n",
- smi->short_timeouts);
- out += sprintf(out, "long_timeouts: %ld\n",
- smi->long_timeouts);
- out += sprintf(out, "timeout_restarts: %ld\n",
- smi->timeout_restarts);
- out += sprintf(out, "idles: %ld\n",
- smi->idles);
- out += sprintf(out, "interrupts: %ld\n",
- smi->interrupts);
- out += sprintf(out, "attentions: %ld\n",
- smi->attentions);
- out += sprintf(out, "flag_fetches: %ld\n",
- smi->flag_fetches);
- out += sprintf(out, "hosed_count: %ld\n",
- smi->hosed_count);
- out += sprintf(out, "complete_transactions: %ld\n",
- smi->complete_transactions);
- out += sprintf(out, "events: %ld\n",
- smi->events);
- out += sprintf(out, "watchdog_pretimeouts: %ld\n",
- smi->watchdog_pretimeouts);
- out += sprintf(out, "incoming_messages: %ld\n",
- smi->incoming_messages);
+ out += sprintf(out, "short_timeouts: %u\n",
+ smi_get_stat(smi, short_timeouts));
+ out += sprintf(out, "long_timeouts: %u\n",
+ smi_get_stat(smi, long_timeouts));
+ out += sprintf(out, "idles: %u\n",
+ smi_get_stat(smi, idles));
+ out += sprintf(out, "interrupts: %u\n",
+ smi_get_stat(smi, interrupts));
+ out += sprintf(out, "attentions: %u\n",
+ smi_get_stat(smi, attentions));
+ out += sprintf(out, "flag_fetches: %u\n",
+ smi_get_stat(smi, flag_fetches));
+ out += sprintf(out, "hosed_count: %u\n",
+ smi_get_stat(smi, hosed_count));
+ out += sprintf(out, "complete_transactions: %u\n",
+ smi_get_stat(smi, complete_transactions));
+ out += sprintf(out, "events: %u\n",
+ smi_get_stat(smi, events));
+ out += sprintf(out, "watchdog_pretimeouts: %u\n",
+ smi_get_stat(smi, watchdog_pretimeouts));
+ out += sprintf(out, "incoming_messages: %u\n",
+ smi_get_stat(smi, incoming_messages));
return out - page;
}
static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
{
smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
- RECEIVE_MSG_AVAIL);
+ RECEIVE_MSG_AVAIL);
return 1;
}
id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
- }
- else if (ipmi_version_major(id) < 1 ||
- (ipmi_version_major(id) == 1 &&
- ipmi_version_minor(id) < 5)) {
+ } else if (ipmi_version_major(id) < 1 ||
+ (ipmi_version_major(id) == 1 &&
+ ipmi_version_minor(id) < 5)) {
smi_info->oem_data_avail_handler =
oem_data_avail_to_receive_msg_avail;
}
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
if (smi_info->intf) {
- /* The timer and thread are only running if the
- interface has been started up and registered. */
+ /*
+ * The timer and thread are only running if the
+ * interface has been started up and registered.
+ */
if (smi_info->thread != NULL)
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return;
-
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
- info->addr_source = NULL;
+ info->addr_source = SI_DEFAULT;
info->si_type = ipmi_defaults[i].type;
info->io_setup = port_setup;
info->io.regsize = DEFAULT_REGSPACING;
info->io.regshift = 0;
- if (try_smi_init(info) == 0) {
- /* Found one... */
- printk(KERN_INFO "ipmi_si: Found default %s state"
- " machine at %s address 0x%lx\n",
- si_to_str[info->si_type],
- addr_space_to_str[info->io.addr_type],
- info->io.addr_data);
- return;
+ if (add_smi(info) == 0) {
+ if ((try_smi_init(info)) == 0) {
+ /* Found one... */
+ printk(KERN_INFO PFX "Found default %s"
+ " state machine at %s address 0x%lx\n",
+ si_to_str[info->si_type],
+ addr_space_to_str[info->io.addr_type],
+ info->io.addr_data);
+ } else
+ cleanup_one_si(info);
}
}
}
return 1;
}
-static int try_smi_init(struct smi_info *new_smi)
+static int add_smi(struct smi_info *new_smi)
{
- int rv;
-
- if (new_smi->addr_source) {
- printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
- " machine at %s address 0x%lx, slave address 0x%x,"
- " irq %d\n",
- new_smi->addr_source,
- si_to_str[new_smi->si_type],
- addr_space_to_str[new_smi->io.addr_type],
- new_smi->io.addr_data,
- new_smi->slave_addr, new_smi->irq);
- }
+ int rv = 0;
+ printk(KERN_INFO PFX "Adding %s-specified %s state machine",
+ ipmi_addr_src_to_str[new_smi->addr_source],
+ si_to_str[new_smi->si_type]);
mutex_lock(&smi_infos_lock);
if (!is_new_interface(new_smi)) {
- printk(KERN_WARNING "ipmi_si: duplicate interface\n");
+ printk(KERN_CONT PFX "duplicate interface\n");
rv = -EBUSY;
goto out_err;
}
+ printk(KERN_CONT "\n");
+
/* So we know not to free it unless we have allocated one. */
new_smi->intf = NULL;
new_smi->si_sm = NULL;
new_smi->handlers = NULL;
+ list_add_tail(&new_smi->link, &smi_infos);
+
+out_err:
+ mutex_unlock(&smi_infos_lock);
+ return rv;
+}
+
+static int try_smi_init(struct smi_info *new_smi)
+{
+ int rv = 0;
+ int i;
+
+ printk(KERN_INFO PFX "Trying %s-specified %s state"
+ " machine at %s address 0x%lx, slave address 0x%x,"
+ " irq %d\n",
+ ipmi_addr_src_to_str[new_smi->addr_source],
+ si_to_str[new_smi->si_type],
+ addr_space_to_str[new_smi->io.addr_type],
+ new_smi->io.addr_data,
+ new_smi->slave_addr, new_smi->irq);
+
switch (new_smi->si_type) {
case SI_KCS:
new_smi->handlers = &kcs_smi_handlers;
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
if (!new_smi->si_sm) {
- printk(" Could not allocate state machine memory\n");
+ printk(KERN_ERR PFX
+ "Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
}
/* Now that we know the I/O size, we can set up the I/O. */
rv = new_smi->io_setup(new_smi);
if (rv) {
- printk(" Could not set up I/O space\n");
+ printk(KERN_ERR PFX "Could not set up I/O space\n");
goto out_err;
}
spin_lock_init(&(new_smi->si_lock));
spin_lock_init(&(new_smi->msg_lock));
- spin_lock_init(&(new_smi->count_lock));
/* Do low-level detection first. */
if (new_smi->handlers->detect(new_smi->si_sm)) {
if (new_smi->addr_source)
- printk(KERN_INFO "ipmi_si: Interface detection"
- " failed\n");
+ printk(KERN_INFO PFX "Interface detection failed\n");
rv = -ENODEV;
goto out_err;
}
- /* Attempt a get device id command. If it fails, we probably
- don't have a BMC here. */
+ /*
+ * Attempt a get device id command. If it fails, we probably
+ * don't have a BMC here.
+ */
rv = try_get_dev_id(new_smi);
if (rv) {
if (new_smi->addr_source)
- printk(KERN_INFO "ipmi_si: There appears to be no BMC"
+ printk(KERN_INFO PFX "There appears to be no BMC"
" at this location\n");
goto out_err;
}
setup_oem_data_handler(new_smi);
setup_xaction_handlers(new_smi);
- /* Try to claim any interrupts. */
- if (new_smi->irq_setup)
- new_smi->irq_setup(new_smi);
-
INIT_LIST_HEAD(&(new_smi->xmit_msgs));
INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
new_smi->curr_msg = NULL;
atomic_set(&new_smi->req_events, 0);
new_smi->run_to_completion = 0;
+ for (i = 0; i < SI_NUM_STATS; i++)
+ atomic_set(&new_smi->stats[i], 0);
- new_smi->interrupt_disabled = 0;
+ new_smi->interrupt_disabled = 1;
atomic_set(&new_smi->stop_operation, 0);
new_smi->intf_num = smi_num;
smi_num++;
- /* Start clearing the flags before we enable interrupts or the
- timer to avoid racing with the timer. */
+ rv = try_enable_event_buffer(new_smi);
+ if (rv == 0)
+ new_smi->has_event_buffer = 1;
+
+ /*
+ * Start clearing the flags before we enable interrupts or the
+ * timer to avoid racing with the timer.
+ */
start_clear_flags(new_smi);
/* IRQ is defined to be set when non-zero. */
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
if (!new_smi->dev) {
- /* If we don't already have a device from something
- * else (like PCI), then register a new one. */
+ /*
+ * If we don't already have a device from something
+ * else (like PCI), then register a new one.
+ */
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
- if (rv) {
- printk(KERN_ERR
- "ipmi_si_intf:"
- " Unable to allocate platform device\n");
+ if (!new_smi->pdev) {
+ printk(KERN_ERR PFX
+ "Unable to allocate platform device\n");
goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
- new_smi->dev->driver = &ipmi_driver;
+ new_smi->dev->driver = &ipmi_driver.driver;
rv = platform_device_add(new_smi->pdev);
if (rv) {
- printk(KERN_ERR
- "ipmi_si_intf:"
- " Unable to register system interface device:"
+ printk(KERN_ERR PFX
+ "Unable to register system interface device:"
" %d\n",
rv);
goto out_err;
"bmc",
new_smi->slave_addr);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to register device: error %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to register device: error %d\n",
+ rv);
goto out_err_stop_timer;
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
- type_file_read_proc, NULL,
- new_smi, THIS_MODULE);
+ type_file_read_proc,
+ new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
- stat_file_read_proc, NULL,
- new_smi, THIS_MODULE);
+ stat_file_read_proc,
+ new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
- param_read_proc, NULL,
- new_smi, THIS_MODULE);
+ param_read_proc,
+ new_smi);
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to create proc entry: %d\n",
- rv);
+ dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
goto out_err_stop_timer;
}
- list_add_tail(&new_smi->link, &smi_infos);
-
- mutex_unlock(&smi_infos_lock);
-
- printk(" IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
+ dev_info(new_smi->dev, "IPMI %s interface initialized\n",
+ si_to_str[new_smi->si_type]);
return 0;
wait_for_timer_and_thread(new_smi);
out_err:
- if (new_smi->intf)
+ new_smi->interrupt_disabled = 1;
+
+ if (new_smi->intf) {
ipmi_unregister_smi(new_smi->intf);
+ new_smi->intf = NULL;
+ }
- if (new_smi->irq_cleanup)
+ if (new_smi->irq_cleanup) {
new_smi->irq_cleanup(new_smi);
+ new_smi->irq_cleanup = NULL;
+ }
- /* Wait until we know that we are out of any interrupt
- handlers might have been running before we freed the
- interrupt. */
+ /*
+ * Wait until we know that we are out of any interrupt
+ * handlers might have been running before we freed the
+ * interrupt.
+ */
synchronize_sched();
if (new_smi->si_sm) {
if (new_smi->handlers)
new_smi->handlers->cleanup(new_smi->si_sm);
kfree(new_smi->si_sm);
+ new_smi->si_sm = NULL;
}
- if (new_smi->addr_source_cleanup)
+ if (new_smi->addr_source_cleanup) {
new_smi->addr_source_cleanup(new_smi);
- if (new_smi->io_cleanup)
+ new_smi->addr_source_cleanup = NULL;
+ }
+ if (new_smi->io_cleanup) {
new_smi->io_cleanup(new_smi);
+ new_smi->io_cleanup = NULL;
+ }
- if (new_smi->dev_registered)
+ if (new_smi->dev_registered) {
platform_device_unregister(new_smi->pdev);
-
- kfree(new_smi);
-
- mutex_unlock(&smi_infos_lock);
+ new_smi->dev_registered = 0;
+ }
return rv;
}
int i;
char *str;
int rv;
+ struct smi_info *e;
+ enum ipmi_addr_src type = SI_INVALID;
if (initialized)
return 0;
initialized = 1;
/* Register the device drivers. */
- rv = driver_register(&ipmi_driver);
+ rv = driver_register(&ipmi_driver.driver);
if (rv) {
- printk(KERN_ERR
- "init_ipmi_si: Unable to register driver: %d\n",
- rv);
+ printk(KERN_ERR PFX "Unable to register driver: %d\n", rv);
return rv;
}
hardcode_find_bmc();
+ /* If the user gave us a device, they presumably want us to use it */
+ mutex_lock(&smi_infos_lock);
+ if (!list_empty(&smi_infos)) {
+ mutex_unlock(&smi_infos_lock);
+ return 0;
+ }
+ mutex_unlock(&smi_infos_lock);
+
+#ifdef CONFIG_PCI
+ rv = pci_register_driver(&ipmi_pci_driver);
+ if (rv)
+ printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
+#endif
+
+#ifdef CONFIG_ACPI
+ pnp_register_driver(&ipmi_pnp_driver);
+#endif
+
#ifdef CONFIG_DMI
dmi_find_bmc();
#endif
#ifdef CONFIG_ACPI
- acpi_find_bmc();
+ spmi_find_bmc();
#endif
-#ifdef CONFIG_PCI
- rv = pci_register_driver(&ipmi_pci_driver);
- if (rv){
- printk(KERN_ERR
- "init_ipmi_si: Unable to register PCI driver: %d\n",
- rv);
- }
+#ifdef CONFIG_PPC_OF
+ of_register_platform_driver(&ipmi_of_platform_driver);
#endif
+ /* We prefer devices with interrupts, but in the case of a machine
+ with multiple BMCs we assume that there will be several instances
+ of a given type so if we succeed in registering a type then also
+ try to register everything else of the same type */
+
+ mutex_lock(&smi_infos_lock);
+ list_for_each_entry(e, &smi_infos, link) {
+ /* Try to register a device if it has an IRQ and we either
+ haven't successfully registered a device yet or this
+ device has the same type as one we successfully registered */
+ if (e->irq && (!type || e->addr_source == type)) {
+ if (!try_smi_init(e)) {
+ type = e->addr_source;
+ }
+ }
+ }
+
+ /* type will only have been set if we successfully registered an si */
+ if (type) {
+ mutex_unlock(&smi_infos_lock);
+ return 0;
+ }
+
+ /* Fall back to the preferred device */
+
+ list_for_each_entry(e, &smi_infos, link) {
+ if (!e->irq && (!type || e->addr_source == type)) {
+ if (!try_smi_init(e)) {
+ type = e->addr_source;
+ }
+ }
+ }
+ mutex_unlock(&smi_infos_lock);
+
+ if (type)
+ return 0;
+
if (si_trydefaults) {
mutex_lock(&smi_infos_lock);
if (list_empty(&smi_infos)) {
/* No BMC was found, try defaults. */
mutex_unlock(&smi_infos_lock);
default_find_bmc();
- } else {
+ } else
mutex_unlock(&smi_infos_lock);
- }
}
mutex_lock(&smi_infos_lock);
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
- driver_unregister(&ipmi_driver);
- printk("ipmi_si: Unable to find any System Interface(s)\n");
+
+#ifdef CONFIG_PPC_OF
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
+ driver_unregister(&ipmi_driver.driver);
+ printk(KERN_WARNING PFX
+ "Unable to find any System Interface(s)\n");
return -ENODEV;
} else {
mutex_unlock(&smi_infos_lock);
static void cleanup_one_si(struct smi_info *to_clean)
{
- int rv;
+ int rv = 0;
unsigned long flags;
if (!to_clean)
list_del(&to_clean->link);
- /* Tell the timer and interrupt handlers that we are shutting
- down. */
- spin_lock_irqsave(&(to_clean->si_lock), flags);
- spin_lock(&(to_clean->msg_lock));
-
+ /* Tell the driver that we are shutting down. */
atomic_inc(&to_clean->stop_operation);
- if (to_clean->irq_cleanup)
- to_clean->irq_cleanup(to_clean);
-
- spin_unlock(&(to_clean->msg_lock));
- spin_unlock_irqrestore(&(to_clean->si_lock), flags);
-
- /* Wait until we know that we are out of any interrupt
- handlers might have been running before we freed the
- interrupt. */
- synchronize_sched();
-
+ /*
+ * Make sure the timer and thread are stopped and will not run
+ * again.
+ */
wait_for_timer_and_thread(to_clean);
- /* Interrupts and timeouts are stopped, now make sure the
- interface is in a clean state. */
+ /*
+ * Timeouts are stopped, now make sure the interrupts are off
+ * for the device. A little tricky with locks to make sure
+ * there are no races.
+ */
+ spin_lock_irqsave(&to_clean->si_lock, flags);
+ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
+ spin_unlock_irqrestore(&to_clean->si_lock, flags);
+ poll(to_clean);
+ schedule_timeout_uninterruptible(1);
+ spin_lock_irqsave(&to_clean->si_lock, flags);
+ }
+ disable_si_irq(to_clean);
+ spin_unlock_irqrestore(&to_clean->si_lock, flags);
+ while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
+ poll(to_clean);
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* Clean up interrupts and make sure that everything is done. */
+ if (to_clean->irq_cleanup)
+ to_clean->irq_cleanup(to_clean);
while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
poll(to_clean);
schedule_timeout_uninterruptible(1);
}
- rv = ipmi_unregister_smi(to_clean->intf);
+ if (to_clean->intf)
+ rv = ipmi_unregister_smi(to_clean->intf);
+
if (rv) {
- printk(KERN_ERR
- "ipmi_si: Unable to unregister device: errno=%d\n",
+ printk(KERN_ERR PFX "Unable to unregister device: errno=%d\n",
rv);
}
- to_clean->handlers->cleanup(to_clean->si_sm);
+ if (to_clean->handlers)
+ to_clean->handlers->cleanup(to_clean->si_sm);
kfree(to_clean->si_sm);
#ifdef CONFIG_PCI
pci_unregister_driver(&ipmi_pci_driver);
#endif
+#ifdef CONFIG_ACPI
+ pnp_unregister_driver(&ipmi_pnp_driver);
+#endif
+
+#ifdef CONFIG_PPC_OF
+ of_unregister_platform_driver(&ipmi_of_platform_driver);
+#endif
mutex_lock(&smi_infos_lock);
list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
cleanup_one_si(e);
mutex_unlock(&smi_infos_lock);
- driver_unregister(&ipmi_driver);
+ driver_unregister(&ipmi_driver.driver);
}
module_exit(cleanup_ipmi_si);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
-MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces.");
+MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
+ " system interfaces.");