#include <linux/seq_file.h>
#include <linux/bitops.h>
#include <linux/clocksource.h>
+#include <linux/slab.h>
#include <asm/current.h>
#include <asm/uaccess.h>
/*
* The High Precision Event Timer driver.
* This driver is closely modelled after the rtc.c driver.
- * http://www.intel.com/hardwaredesign/hpetspec.htm
+ * http://www.intel.com/hardwaredesign/hpetspec_1.pdf
*/
#define HPET_USER_FREQ (64)
#define HPET_DRIFT (500)
#ifdef CONFIG_IA64
static void __iomem *hpet_mctr;
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)read_counter((void __iomem *)hpet_mctr);
}
unsigned long m, t;
t = devp->hd_ireqfreq;
- m = read_counter(&devp->hd_hpet->hpet_mc);
- write_counter(t + m + devp->hd_hpets->hp_delta,
- &devp->hd_timer->hpet_compare);
+ m = read_counter(&devp->hd_timer->hpet_compare);
+ write_counter(t + m, &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
else
v &= ~0xffff;
- for (irq = find_first_bit(&v, HPET_MAX_IRQ); irq < HPET_MAX_IRQ;
- irq = find_next_bit(&v, HPET_MAX_IRQ, 1 + irq)) {
-
- if (irq >= NR_IRQS) {
+ for_each_set_bit(irq, &v, HPET_MAX_IRQ) {
+ if (irq >= nr_irqs) {
irq = HPET_MAX_IRQ;
break;
}
- gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE,
+ gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
if (gsi > 0)
break;
if (irq)
free_irq(irq, devp);
- if (file->f_flags & FASYNC)
- hpet_fasync(-1, file, 0);
-
file->private_data = NULL;
return 0;
}
g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK;
if (devp->hd_flags & HPET_PERIODIC) {
- write_counter(t, &timer->hpet_compare);
g |= Tn_TYPE_CNF_MASK;
- v |= Tn_TYPE_CNF_MASK;
- writeq(v, &timer->hpet_config);
- v |= Tn_VAL_SET_CNF_MASK;
+ v |= Tn_TYPE_CNF_MASK | Tn_VAL_SET_CNF_MASK;
writeq(v, &timer->hpet_config);
local_irq_save(flags);
- /* NOTE: what we modify here is a hidden accumulator
+ /*
+ * NOTE: First we modify the hidden accumulator
* register supported by periodic-capable comparators.
* We never want to modify the (single) counter; that
- * would affect all the comparators.
+ * would affect all the comparators. The value written
+ * is the counter value when the first interrupt is due.
*/
m = read_counter(&hpet->hpet_mc);
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
+ /*
+ * Then we modify the comparator, indicating the period
+ * for subsequent interrupt.
+ */
+ write_counter(t, &timer->hpet_compare);
} else {
local_irq_save(flags);
m = read_counter(&hpet->hpet_mc);
static ctl_table hpet_table[] = {
{
- .ctl_name = CTL_UNNUMBERED,
.procname = "max-user-freq",
.data = &hpet_max_freq,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = proc_dointvec,
},
- {.ctl_name = 0}
+ {}
};
static ctl_table hpet_root[] = {
{
- .ctl_name = CTL_UNNUMBERED,
.procname = "hpet",
.maxlen = 0,
.mode = 0555,
.child = hpet_table,
},
- {.ctl_name = 0}
+ {}
};
static ctl_table dev_root[] = {
{
- .ctl_name = CTL_DEV,
.procname = "dev",
.maxlen = 0,
.mode = 0555,
.child = hpet_root,
},
- {.ctl_name = 0}
+ {}
};
static struct ctl_table_header *sysctl_header;
*/
#define TICK_CALIBRATE (1000UL)
-static unsigned long hpet_calibrate(struct hpets *hpetp)
+static unsigned long __hpet_calibrate(struct hpets *hpetp)
{
struct hpet_timer __iomem *timer = NULL;
unsigned long t, m, count, i, flags, start;
return (m - start) / i;
}
+static unsigned long hpet_calibrate(struct hpets *hpetp)
+{
+ unsigned long ret = -1;
+ unsigned long tmp;
+
+ /*
+ * Try to calibrate until return value becomes stable small value.
+ * If SMI interruption occurs in calibration loop, the return value
+ * will be big. This avoids its impact.
+ */
+ for ( ; ; ) {
+ tmp = __hpet_calibrate(hpetp);
+ if (ret <= tmp)
+ break;
+ ret = tmp;
+ }
+
+ return ret;
+}
+
int hpet_alloc(struct hpet_data *hdp)
{
u64 cap, mcfg;
hdp->hd_address = ioremap(addr.minimum, addr.address_length);
if (hpet_is_known(hdp)) {
- printk(KERN_DEBUG "%s: 0x%lx is busy\n",
- __func__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return AE_ALREADY_EXISTS;
}
HPET_RANGE_SIZE);
if (hpet_is_known(hdp)) {
- printk(KERN_DEBUG "%s: 0x%lx is busy\n",
- __func__, hdp->hd_phys_address);
iounmap(hdp->hd_address);
return AE_ALREADY_EXISTS;
}
irqp = &res->data.extended_irq;
for (i = 0; i < irqp->interrupt_count; i++) {
- irq = acpi_register_gsi(irqp->interrupts[i],
+ irq = acpi_register_gsi(NULL, irqp->interrupts[i],
irqp->triggering, irqp->polarity);
if (irq < 0)
return AE_ERROR;