#define REALLY_SLOW_IO
#define DEBUGT 2
-#define DCL_DEBUG /* debug disk change line */
+#define DCL_DEBUG /* debug disk change line */
/* do print messages for unexpected interrupts */
static int print_unex = 1;
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/buffer_head.h> /* for invalidate_buffers() */
#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
/*
* PS/2 floppies have much slower step rates than regular floppies.
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
static int FLOPPY_IRQ = 6;
static int FLOPPY_DMA = 2;
static struct request *current_req;
static struct request_queue *floppy_queue;
-static void do_fd_request(struct request_queue * q);
+static void do_fd_request(struct request_queue *q);
#ifndef fd_get_dma_residue
#define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
#endif
#ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
#endif
static inline void fallback_on_nodma_alloc(char **addr, size_t l)
return; /* we have the memory */
if (can_use_virtual_dma != 2)
return; /* no fallback allowed */
- printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+ pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
*addr = (char *)nodma_mem_alloc(l);
#else
return;
static unsigned long fake_change;
static int initialising = 1;
-#define ITYPE(x) (((x)>>2) & 0x1f)
-#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
-#define UNIT(x) ((x) & 0x03) /* drive on fdc */
-#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
+#define ITYPE(x) (((x) >> 2) & 0x1f)
+#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
+#define UNIT(x) ((x) & 0x03) /* drive on fdc */
+#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
/* reverse mapping from unit and fdc to drive */
#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
-#define SETF(x) set_bit(x##_BIT, &DRS->flags)
-#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
-#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
-#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
+#define DP (&drive_params[current_drive])
+#define DRS (&drive_state[current_drive])
+#define DRWE (&write_errors[current_drive])
+#define FDCS (&fdc_state[fdc])
+#define CLEARF(x) clear_bit(x##_BIT, &DRS->flags)
+#define SETF(x) set_bit(x##_BIT, &DRS->flags)
+#define TESTF(x) test_bit(x##_BIT, &DRS->flags)
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
+#define UDP (&drive_params[drive])
+#define UDRS (&drive_state[drive])
+#define UDRWE (&write_errors[drive])
+#define UFDCS (&fdc_state[FDC(drive)])
+#define UCLEARF(x) clear_bit(x##_BIT, &UDRS->flags)
+#define USETF(x) set_bit(x##_BIT, &UDRS->flags)
+#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
+#define DPRINT(format, args...) \
+ pr_info(DEVICE_NAME "%d: " format, current_drive, ##args)
-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
/* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND (raw_cmd->cmd[0])
+#define DR_SELECT (raw_cmd->cmd[1])
+#define TRACK (raw_cmd->cmd[2])
+#define HEAD (raw_cmd->cmd[3])
+#define SECTOR (raw_cmd->cmd[4])
+#define SIZECODE (raw_cmd->cmd[5])
+#define SECT_PER_TRACK (raw_cmd->cmd[6])
+#define GAP (raw_cmd->cmd[7])
+#define SIZECODE2 (raw_cmd->cmd[8])
#define NR_RW 9
/* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE (raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP (raw_cmd->cmd[4])
+#define F_FILL (raw_cmd->cmd[5])
#define NR_F 6
/*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
* [Now it is rather a minimum]
*/
#define MAX_DISK_SIZE 4 /* 3984 */
#define MAX_REPLIES 16
static unsigned char reply_buffer[MAX_REPLIES];
static int inr; /* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+#define ST0 (reply_buffer[0])
+#define ST1 (reply_buffer[1])
+#define ST2 (reply_buffer[2])
+#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
+#define R_TRACK (reply_buffer[3])
+#define R_HEAD (reply_buffer[4])
+#define R_SECTOR (reply_buffer[5])
+#define R_SIZECODE (reply_buffer[6])
+
+#define SEL_DLY (2 * HZ / 100)
/*
* this struct defines the different floppy drive types.
static int probing;
/* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE -1
+#define FD_COMMAND_ERROR 2
+#define FD_COMMAND_OKAY 3
static volatile int command_status = FD_COMMAND_NONE;
static unsigned long fdc_busy;
static DECLARE_WAIT_QUEUE_HEAD(command_done);
#define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
+#define CALL(x) if ((x) == -EINTR) return -EINTR
+#define ECALL(x) if ((ret = (x))) return ret;
+#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
+#define WAIT(x) _WAIT((x),interruptible)
+#define IWAIT(x) _WAIT((x),1)
/* Errors during formatting are counted here. */
static int format_errors;
static int *errors;
typedef void (*done_f)(int);
static struct cont_t {
- void (*interrupt)(void); /* this is called after the interrupt of the
- * main command */
+ void (*interrupt)(void);
+ /* this is called after the interrupt of the
+ * main command */
void (*redo)(void); /* this is called to retry the operation */
void (*error)(void); /* this is called to tally an error */
done_f done; /* this is called to say if the operation has
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
* reset doesn't need to be tested before sending commands, because
* output_byte is automatically disabled when reset is set.
*/
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
static void reset_fdc(void);
/*
* information to interrupts. They are the data used for the current
* request.
*/
-#define NO_TRACK -1
-#define NEED_1_RECAL -2
-#define NEED_2_RECAL -3
+#define NO_TRACK -1
+#define NEED_1_RECAL -2
+#define NEED_2_RECAL -3
static int usage_count;
static inline void debugt(const char *message)
{
if (DP->flags & DEBUGT)
- printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+ pr_info("%s dtime=%lu\n", message, jiffies - debugtimer);
}
#else
static inline void set_debugt(void) { }
}
#endif
-static void (*do_floppy) (void) = NULL;
+static void (*do_floppy)(void) = NULL;
#ifdef FLOPPY_SANITY_CHECK
#define OLOGSIZE 20
-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
static unsigned long interruptjiffies;
static unsigned long resultjiffies;
static int resultsize;
} else
fd_timeout.expires = jiffies + UDP->timeout;
add_timer(&fd_timeout);
- if (UDP->flags & FD_DEBUG) {
- DPRINT("reschedule timeout ");
- printk(message, marg);
- printk("\n");
- }
+ if (UDP->flags & FD_DEBUG)
+ DPRINT("reschedule timeout %s %d\n", message, marg);
timeout_message = message;
}
spin_unlock_irqrestore(&floppy_lock, flags);
}
-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)
/*
* Bottom half floppy driver.
if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
drive = REVDRIVE(fdc, unit);
#ifdef DCL_DEBUG
- if (UDP->flags & FD_DEBUG) {
+ if (UDP->flags & FD_DEBUG)
DPRINT("calling disk change from set_dor\n");
- }
#endif
disk_change(drive);
}
current_drive = drive;
}
if (fdc != 1 && fdc != 0) {
- printk("bad fdc value\n");
+ pr_info("bad fdc value\n");
return;
}
set_dor(fdc, ~0, 8);
static int _lock_fdc(int drive, int interruptible, int line)
{
if (!usage_count) {
- printk(KERN_ERR
- "Trying to lock fdc while usage count=0 at line %d\n",
+ pr_err("Trying to lock fdc while usage count=0 at line %d\n",
line);
return -1;
}
return 0;
}
-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
+#define lock_fdc(drive, interruptible) \
+ _lock_fdc(drive, interruptible, __LINE__)
-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define LOCK_FDC(drive, interruptible) \
+ if (lock_fdc(drive, interruptible)) \
+ return -EINTR;
/* unlocks the driver */
static inline void unlock_fdc(void)
del_timer(&fd_timeout);
cont = NULL;
clear_bit(0, &fdc_busy);
- if (elv_next_request(floppy_queue))
+ if (current_req || blk_peek_request(floppy_queue))
do_fd_request(floppy_queue);
spin_unlock_irqrestore(&floppy_lock, flags);
wake_up(&fdc_wait);
static DECLARE_WORK(floppy_work, NULL);
-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
{
PREPARE_WORK(&floppy_work, (work_func_t)handler);
schedule_work(&floppy_work);
static void fd_watchdog(void)
{
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from watchdog\n");
- }
#endif
if (disk_change(current_drive)) {
if (raw_cmd->length == 0) {
int i;
- printk("zero dma transfer size:");
+ pr_info("zero dma transfer size:");
for (i = 0; i < raw_cmd->cmd_count; i++)
- printk("%x,", raw_cmd->cmd[i]);
- printk("\n");
+ pr_cont("%x,", raw_cmd->cmd[i]);
+ pr_cont("\n");
cont->done(0);
FDCS->reset = 1;
return;
}
if (((unsigned long)raw_cmd->kernel_data) % 512) {
- printk("non aligned address: %p\n", raw_cmd->kernel_data);
+ pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
cont->done(0);
FDCS->reset = 1;
return;
/* sends a command byte to the fdc */
static int output_byte(char byte)
{
- int status;
+ int status = wait_til_ready();
- if ((status = wait_til_ready()) < 0)
+ if (status < 0)
return -1;
if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
fd_outb(byte, FD_DATA);
return -1;
}
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
/* gets the response from the fdc */
static int result(void)
{
int status = 0;
for (i = 0; i < MAX_REPLIES; i++) {
- if ((status = wait_til_ready()) < 0)
+ status = wait_til_ready();
+ if (status < 0)
break;
status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
if ((status & ~STATUS_BUSY) == STATUS_READY) {
/* does the fdc need more output? */
static int need_more_output(void)
{
- int status;
+ int status = wait_til_ready();
- if ((status = wait_til_ready()) < 0)
+ if (status < 0)
return -1;
if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
return MORE_OUTPUT;
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
- FDCS->reset = 1; /* convenient way to return to
- * redo without to much hassle (deep
- * stack et al. */
+ FDCS->reset = 1;
+ /*
+ * convenient way to return to
+ * redo without too much hassle
+ * (deep stack et al.)
+ */
return;
}
} else
/* Convert step rate from microseconds to milliseconds and 4 bits */
srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
- if (slow_floppy) {
+ if (slow_floppy)
srt = srt / 4;
- }
+
SUPBOUND(srt, 0xf);
INFBOUND(srt, 0);
* Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
*/
FDCS->dtr = raw_cmd->rate & 3;
- return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
- (timeout_fn) floppy_ready));
+ return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+ (timeout_fn)floppy_ready);
} /* fdc_dtr */
static void tell_sector(void)
{
- printk(": track %d, head %d, sector %d, size %d",
- R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+ pr_cont(": track %d, head %d, sector %d, size %d",
+ R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
} /* tell_sector */
+static void print_errors(void)
+{
+ DPRINT("");
+ if (ST0 & ST0_ECE) {
+ pr_cont("Recalibrate failed!");
+ } else if (ST2 & ST2_CRC) {
+ pr_cont("data CRC error");
+ tell_sector();
+ } else if (ST1 & ST1_CRC) {
+ pr_cont("CRC error");
+ tell_sector();
+ } else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+ (ST2 & ST2_MAM)) {
+ if (!probing) {
+ pr_cont("sector not found");
+ tell_sector();
+ } else
+ pr_cont("probe failed...");
+ } else if (ST2 & ST2_WC) { /* seek error */
+ pr_cont("wrong cylinder");
+ } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
+ pr_cont("bad cylinder");
+ } else {
+ pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+ ST0, ST1, ST2);
+ tell_sector();
+ }
+ pr_cont("\n");
+}
+
/*
* OK, this error interpreting routine is called after a
* DMA read/write has succeeded
DPRINT("Over/Underrun - retrying\n");
bad = 0;
} else if (*errors >= DP->max_errors.reporting) {
- DPRINT("");
- if (ST0 & ST0_ECE) {
- printk("Recalibrate failed!");
- } else if (ST2 & ST2_CRC) {
- printk("data CRC error");
- tell_sector();
- } else if (ST1 & ST1_CRC) {
- printk("CRC error");
- tell_sector();
- } else if ((ST1 & (ST1_MAM | ST1_ND))
- || (ST2 & ST2_MAM)) {
- if (!probing) {
- printk("sector not found");
- tell_sector();
- } else
- printk("probe failed...");
- } else if (ST2 & ST2_WC) { /* seek error */
- printk("wrong cylinder");
- } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
- printk("bad cylinder");
- } else {
- printk
- ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
- ST0, ST1, ST2);
- tell_sector();
- }
- printk("\n");
+ print_errors();
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
#ifdef DCL_DEBUG
if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of effective seek\n");
+ DPRINT("clearing NEWCHANGE flag because of effective seek\n");
DPRINT("jiffies=%lu\n", jiffies);
}
#endif
blind_seek = 0;
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from seek\n");
- }
#endif
if (!TESTF(FD_DISK_NEWCHANGE) &&
do_floppy = seek_interrupt;
output_byte(FD_SEEK);
output_byte(UNIT(current_drive));
- LAST_OUT(track);
+ if (output_byte(track) < 0) {
+ reset_fdc();
+ return;
+ }
debugt("seek command:");
}
* be already at track 0.) Clear the
* new change flag */
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of second recalibrate\n");
- }
+ if (DP->flags & FD_DEBUG)
+ DPRINT("clearing NEWCHANGE flag because of second recalibrate\n");
#endif
CLEARF(FD_DISK_NEWCHANGE);
DPRINT("%s ", message);
if (inr >= 0)
for (i = 0; i < inr; i++)
- printk("repl[%d]=%x ", i, reply_buffer[i]);
- printk("\n");
+ pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+ pr_cont("\n");
}
/* interrupt handler. Note that this can be called externally on the Sparc */
do_floppy = NULL;
if (fdc >= N_FDC || FDCS->address == -1) {
/* we don't even know which FDC is the culprit */
- printk("DOR0=%x\n", fdc_state[0].dor);
- printk("floppy interrupt on bizarre fdc %d\n", fdc);
- printk("handler=%p\n", handler);
+ pr_info("DOR0=%x\n", fdc_state[0].dor);
+ pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+ pr_info("handler=%p\n", handler);
is_alive("bizarre fdc");
return IRQ_NONE;
}
debugt("recalibrate floppy:");
do_floppy = recal_interrupt;
output_byte(FD_RECALIBRATE);
- LAST_OUT(UNIT(current_drive));
+ if (output_byte(UNIT(current_drive)) < 0) {
+ reset_fdc();
+ return;
+ }
}
/*
debugt("reset interrupt:");
result(); /* get the status ready for set_fdc */
if (FDCS->reset) {
- printk("reset set in interrupt, calling %p\n", cont->error);
+ pr_info("reset set in interrupt, calling %p\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
}
cont->redo();
{
int i;
- printk("\n");
- printk("floppy driver state\n");
- printk("-------------------\n");
- printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
- jiffies, interruptjiffies, jiffies - interruptjiffies,
- lasthandler);
+ pr_info("\n");
+ pr_info("floppy driver state\n");
+ pr_info("-------------------\n");
+ pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
+ jiffies, interruptjiffies, jiffies - interruptjiffies,
+ lasthandler);
#ifdef FLOPPY_SANITY_CHECK
- printk("timeout_message=%s\n", timeout_message);
- printk("last output bytes:\n");
+ pr_info("timeout_message=%s\n", timeout_message);
+ pr_info("last output bytes:\n");
for (i = 0; i < OLOGSIZE; i++)
- printk("%2x %2x %lu\n",
- output_log[(i + output_log_pos) % OLOGSIZE].data,
- output_log[(i + output_log_pos) % OLOGSIZE].status,
- output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
- printk("last result at %lu\n", resultjiffies);
- printk("last redo_fd_request at %lu\n", lastredo);
- for (i = 0; i < resultsize; i++) {
- printk("%2x ", reply_buffer[i]);
- }
- printk("\n");
+ pr_info("%2x %2x %lu\n",
+ output_log[(i + output_log_pos) % OLOGSIZE].data,
+ output_log[(i + output_log_pos) % OLOGSIZE].status,
+ output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+ pr_info("last result at %lu\n", resultjiffies);
+ pr_info("last redo_fd_request at %lu\n", lastredo);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+ reply_buffer, resultsize, true);
#endif
- printk("status=%x\n", fd_inb(FD_STATUS));
- printk("fdc_busy=%lu\n", fdc_busy);
+ pr_info("status=%x\n", fd_inb(FD_STATUS));
+ pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
- printk("do_floppy=%p\n", do_floppy);
+ pr_info("do_floppy=%p\n", do_floppy);
if (work_pending(&floppy_work))
- printk("floppy_work.func=%p\n", floppy_work.func);
+ pr_info("floppy_work.func=%p\n", floppy_work.func);
if (timer_pending(&fd_timer))
- printk("fd_timer.function=%p\n", fd_timer.function);
+ pr_info("fd_timer.function=%p\n", fd_timer.function);
if (timer_pending(&fd_timeout)) {
- printk("timer_function=%p\n", fd_timeout.function);
- printk("expires=%lu\n", fd_timeout.expires - jiffies);
- printk("now=%lu\n", jiffies);
- }
- printk("cont=%p\n", cont);
- printk("current_req=%p\n", current_req);
- printk("command_status=%d\n", command_status);
- printk("\n");
+ pr_info("timer_function=%p\n", fd_timeout.function);
+ pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+ pr_info("now=%lu\n", jiffies);
+ }
+ pr_info("cont=%p\n", cont);
+ pr_info("current_req=%p\n", current_req);
+ pr_info("command_status=%d\n", command_status);
+ pr_info("\n");
}
static void floppy_shutdown(unsigned long data)
cont->done(0);
cont->redo(); /* this will recall reset when needed */
} else {
- printk("no cont in shutdown!\n");
+ pr_info("no cont in shutdown!\n");
process_fd_request();
}
is_alive("floppy shutdown");
set_dor(fdc, mask, data);
/* wait_for_completion also schedules reset if needed. */
- return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
- (timeout_fn) function));
+ return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+ (timeout_fn)function);
}
static void floppy_ready(void)
{
- CHECK_RESET;
+ if (FDCS->reset) {
+ reset_fdc();
+ return;
+ }
if (start_motor(floppy_ready))
return;
if (fdc_dtr())
return;
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from floppy_ready\n");
- }
#endif
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !DP->select_delay)
- twaddle(); /* this clears the dcl on certain drive/controller
- * combinations */
+ twaddle(); /* this clears the dcl on certain
+ * drive/controller combinations */
#ifdef fd_chose_dma_mode
if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
scandrives();
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("setting NEWCHANGE in floppy_start\n");
- }
#endif
SETF(FD_DISK_NEWCHANGE);
floppy_ready();
}
#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
#define CT(x) ((x) | 0xc0)
+
static void setup_format_params(int track)
{
int n;
raw_cmd = &default_raw_cmd;
raw_cmd->track = track;
- raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
- FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+ raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+ FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
raw_cmd->rate = _floppy->rate & 0x43;
raw_cmd->cmd_count = NR_F;
COMMAND = FM_MODE(_floppy, FD_FORMAT);
/* current_count_sectors can be zero if transfer failed */
if (error)
- nr_sectors = req->current_nr_sectors;
+ nr_sectors = blk_rq_cur_sectors(req);
if (__blk_end_request(req, error, nr_sectors << 9))
return;
int block;
probing = 0;
- reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+ reschedule_timeout(MAXTIMEOUT, "request done", uptodate);
if (!req) {
- printk("floppy.c: no request in request_done\n");
+ pr_info("floppy.c: no request in request_done\n");
return;
}
if (uptodate) {
/* maintain values for invalidation on geometry
* change */
- block = current_count_sectors + req->sector;
+ block = current_count_sectors + blk_rq_pos(req);
INFBOUND(DRS->maxblock, block);
if (block > _floppy->sect)
DRS->maxtrack = 1;
/* record write error information */
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
- DRWE->first_error_sector = req->sector;
+ DRWE->first_error_sector = blk_rq_pos(req);
DRWE->first_error_generation = DRS->generation;
}
- DRWE->last_error_sector = req->sector;
+ DRWE->last_error_sector = blk_rq_pos(req);
DRWE->last_error_generation = DRS->generation;
}
spin_lock_irqsave(q->queue_lock, flags);
DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
DPRINT("long rw: %x instead of %lx\n",
nr_sectors, current_count_sectors);
- printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
- printk("rh=%d h=%d\n", R_HEAD, HEAD);
- printk("rt=%d t=%d\n", R_TRACK, TRACK);
- printk("heads=%d eoc=%d\n", heads, eoc);
- printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
- fsector_t, ssize);
- printk("in_sector_offset=%d\n", in_sector_offset);
+ pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+ pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+ pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+ pr_info("heads=%d eoc=%d\n", heads, eoc);
+ pr_info("spt=%d st=%d ss=%d\n",
+ SECT_PER_TRACK, fsector_t, ssize);
+ pr_info("in_sector_offset=%d\n", in_sector_offset);
}
#endif
max_sector = transfer_size(ssize,
min(max_sector, max_sector_2),
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
- buffer_max > fsector_t + current_req->nr_sectors)
+ buffer_max > fsector_t + blk_rq_sectors(current_req))
current_count_sectors = min_t(int, buffer_max - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
remaining = current_count_sectors << 9;
#ifdef FLOPPY_SANITY_CHECK
- if ((remaining >> 9) > current_req->nr_sectors &&
- CT(COMMAND) == FD_WRITE) {
+ if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
- printk("current_count_sectors=%ld\n", current_count_sectors);
- printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%ld\n",
- current_req->nr_sectors);
- printk("current_req->current_nr_sectors=%u\n",
- current_req->current_nr_sectors);
- printk("max_sector=%d\n", max_sector);
- printk("ssize=%d\n", ssize);
+ pr_info("current_count_sectors=%ld\n", current_count_sectors);
+ pr_info("remaining=%d\n", remaining >> 9);
+ pr_info("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
+ pr_info("current_req->current_nr_sectors=%u\n",
+ blk_rq_cur_sectors(current_req));
+ pr_info("max_sector=%d\n", max_sector);
+ pr_info("ssize=%d\n", ssize);
}
#endif
dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
- size = current_req->current_nr_sectors << 9;
+ size = blk_rq_cur_bytes(current_req);
rq_for_each_segment(bv, current_req, iter) {
if (!remaining)
floppy_track_buffer + (max_buffer_sectors << 10) ||
dma_buffer < floppy_track_buffer) {
DPRINT("buffer overrun in copy buffer %d\n",
- (int)((floppy_track_buffer -
- dma_buffer) >> 9));
- printk("fsector_t=%d buffer_min=%d\n",
- fsector_t, buffer_min);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ (int)((floppy_track_buffer - dma_buffer) >> 9));
+ pr_info("fsector_t=%d buffer_min=%d\n",
+ fsector_t, buffer_min);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
break;
}
if (((unsigned long)buffer) % 512)
end_sector = SECTOR + hard_sectors - 1;
#ifdef FLOPPY_SANITY_CHECK
if (end_sector > SECT_PER_TRACK) {
- printk("too many sectors %d > %d\n",
- end_sector, SECT_PER_TRACK);
+ pr_info("too many sectors %d > %d\n",
+ end_sector, SECT_PER_TRACK);
return;
}
#endif
- SECT_PER_TRACK = end_sector; /* make sure SECT_PER_TRACK points
- * to end of transfer */
+ SECT_PER_TRACK = end_sector;
+ /* make sure SECT_PER_TRACK
+ * points to end of transfer */
}
}
int ssize;
if (max_buffer_sectors == 0) {
- printk("VFS: Block I/O scheduled on unopened device\n");
+ pr_info("VFS: Block I/O scheduled on unopened device\n");
return 0;
}
max_sector = _floppy->sect * _floppy->head;
- TRACK = (int)current_req->sector / max_sector;
- fsector_t = (int)current_req->sector % max_sector;
+ TRACK = (int)blk_rq_pos(current_req) / max_sector;
+ fsector_t = (int)blk_rq_pos(current_req) % max_sector;
if (_floppy->track && TRACK >= _floppy->track) {
- if (current_req->current_nr_sectors & 1) {
+ if (blk_rq_cur_sectors(current_req) & 1) {
current_count_sectors = 1;
return 1;
} else
if (fsector_t >= max_sector) {
current_count_sectors =
min_t(int, _floppy->sect - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
return 1;
}
SIZECODE = 2;
in_sector_offset = (fsector_t % _floppy->sect) % ssize;
aligned_sector_t = fsector_t - in_sector_offset;
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
if ((raw_cmd->track == buffer_track) &&
(current_drive == buffer_drive) &&
(fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
copy_buffer(1, max_sector, buffer_max);
return 1;
}
- } else if (in_sector_offset || current_req->nr_sectors < ssize) {
+ } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
- if (fsector_t + current_req->nr_sectors > ssize &&
- fsector_t + current_req->nr_sectors < ssize + ssize)
+ unsigned int sectors;
+
+ sectors = fsector_t + blk_rq_sectors(current_req);
+ if (sectors > ssize && sectors < ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
* on a 64 bit machine!
*/
max_size = buffer_chain_size();
- dma_limit =
- (MAX_DMA_ADDRESS -
- ((unsigned long)current_req->buffer)) >> 9;
- if ((unsigned long)max_size > dma_limit) {
+ dma_limit = (MAX_DMA_ADDRESS -
+ ((unsigned long)current_req->buffer)) >> 9;
+ if ((unsigned long)max_size > dma_limit)
max_size = dma_limit;
- }
/* 64 kb boundaries */
if (CROSS_64KB(current_req->buffer, max_size << 9))
max_size = (K_64 -
*/
if (!direct ||
(indirect * 2 > direct * 3 &&
- *errors < DP->max_errors.read_track && ((!probing
- || (DP->read_track & (1 << DRS->probed_format)))))) {
- max_size = current_req->nr_sectors;
+ *errors < DP->max_errors.read_track &&
+ ((!probing ||
+ (DP->read_track & (1 << DRS->probed_format)))))) {
+ max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
if (raw_cmd->length == 0) {
- DPRINT
- ("zero dma transfer attempted from make_raw_request\n");
- DPRINT("indirect=%d direct=%d fsector_t=%d",
+ DPRINT("zero dma transfer attempted from make_raw_request\n");
+ DPRINT("indirect=%d direct=%d fsector_t=%d\n",
indirect, direct, fsector_t);
return 0;
}
fsector_t > buffer_max ||
fsector_t < buffer_min ||
((CT(COMMAND) == FD_READ ||
- (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+ (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
- max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
- /* not enough space */
- ) {
+ max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+ /* not enough space */
buffer_track = -1;
buffer_drive = current_drive;
buffer_max = buffer_min = aligned_sector_t;
}
raw_cmd->kernel_data = floppy_track_buffer +
- ((aligned_sector_t - buffer_min) << 9);
+ ((aligned_sector_t - buffer_min) << 9);
if (CT(COMMAND) == FD_WRITE) {
/* copy write buffer to track buffer.
DPRINT("fractionary current count b=%lx s=%lx\n",
raw_cmd->length, current_count_sectors);
if (raw_cmd->kernel_data != current_req->buffer)
- printk("addr=%d, length=%ld\n",
- (int)((raw_cmd->kernel_data -
- floppy_track_buffer) >> 9),
- current_count_sectors);
- printk("st=%d ast=%d mse=%d msi=%d\n",
- fsector_t, aligned_sector_t, max_sector, max_size);
- printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
- printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
- COMMAND, SECTOR, HEAD, TRACK);
- printk("buffer drive=%d\n", buffer_drive);
- printk("buffer track=%d\n", buffer_track);
- printk("buffer_min=%d\n", buffer_min);
- printk("buffer_max=%d\n", buffer_max);
+ pr_info("addr=%d, length=%ld\n",
+ (int)((raw_cmd->kernel_data -
+ floppy_track_buffer) >> 9),
+ current_count_sectors);
+ pr_info("st=%d ast=%d mse=%d msi=%d\n",
+ fsector_t, aligned_sector_t, max_sector, max_size);
+ pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+ pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+ COMMAND, SECTOR, HEAD, TRACK);
+ pr_info("buffer drive=%d\n", buffer_drive);
+ pr_info("buffer track=%d\n", buffer_track);
+ pr_info("buffer_min=%d\n", buffer_min);
+ pr_info("buffer_max=%d\n", buffer_max);
return 0;
}
raw_cmd->kernel_data + raw_cmd->length >
floppy_track_buffer + (max_buffer_sectors << 10)) {
DPRINT("buffer overrun in schedule dma\n");
- printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
- fsector_t, buffer_min, raw_cmd->length >> 9);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+ fsector_t, buffer_min, raw_cmd->length >> 9);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
return 0;
}
- } else if (raw_cmd->length > current_req->nr_sectors << 9 ||
- current_count_sectors > current_req->nr_sectors) {
+ } else if (raw_cmd->length > blk_rq_bytes(current_req) ||
+ current_count_sectors > blk_rq_sectors(current_req)) {
DPRINT("buffer overrun in direct transfer\n");
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
DPRINT("more sectors than bytes\n");
- printk("bytes=%ld\n", raw_cmd->length >> 9);
- printk("sectors=%ld\n", current_count_sectors);
+ pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+ pr_info("sectors=%ld\n", current_count_sectors);
}
if (raw_cmd->length == 0) {
DPRINT("zero dma transfer attempted from make_raw_request\n");
struct request *req;
spin_lock_irq(floppy_queue->queue_lock);
- req = elv_next_request(floppy_queue);
+ req = blk_fetch_request(floppy_queue);
spin_unlock_irq(floppy_queue->queue_lock);
if (!req) {
do_floppy = NULL;
schedule_bh(redo_fd_request);
}
-static void do_fd_request(struct request_queue * q)
+static void do_fd_request(struct request_queue *q)
{
if (max_buffer_sectors == 0) {
- printk("VFS: do_fd_request called on non-open device\n");
+ pr_info("VFS: do_fd_request called on non-open device\n");
return;
}
if (usage_count == 0) {
- printk("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector,
- current_req->cmd_type, current_req->cmd_flags);
+ pr_info("warning: usage count=0, current_req=%p exiting\n",
+ current_req);
+ pr_info("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
raw_cmd->cmd_count = 0;
cont = &poll_cont;
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("setting NEWCHANGE in poll_drive\n");
- }
#endif
SETF(FD_DISK_NEWCHANGE);
WAIT(floppy_ready);
static void reset_intr(void)
{
- printk("weird, reset interrupt called\n");
+ pr_info("weird, reset interrupt called\n");
}
static struct cont_t reset_cont = {
return copy_to_user(param, address, size) ? -EFAULT : 0;
}
-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+ unsigned long size)
{
return copy_from_user(address, param, size) ? -EFAULT : 0;
}
-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
+#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) \
+ ? -EFAULT : 0)
+#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) \
+ ? -EFAULT : 0)
-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
+#define COPYOUT(x) ECALL(_COPYOUT(x))
+#define COPYIN(x) ECALL(_COPYIN(x))
static inline const char *drive_name(int type, int drive)
{
COPYOUT(*ptr);
param += sizeof(struct floppy_raw_cmd);
if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
- if (ptr->length >= 0
- && ptr->length <= ptr->buffer_length)
- ECALL(fd_copyout
- (ptr->data, ptr->kernel_data,
- ptr->buffer_length - ptr->length));
+ if (ptr->length >= 0 &&
+ ptr->length <= ptr->buffer_length) {
+ long length = ptr->buffer_length - ptr->length;
+ ECALL(fd_copyout(ptr->data, ptr->kernel_data,
+ length));
+ }
}
ptr = ptr->next;
}
cont = &raw_cmd_cont;
ret = wait_til_done(floppy_start, 1);
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
+ if (DP->flags & FD_DEBUG)
DPRINT("calling disk change from raw_cmd ioctl\n");
- }
#endif
if (ret != -EINTR && FDCS->reset)
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mutex_lock(&open_lock);
- LOCK_FDC(drive, 1);
+ if (lock_fdc(drive, 1)) {
+ mutex_unlock(&open_lock);
+ return -EINTR;
+ }
floppy_type[type] = *g;
floppy_type[type].name = "user format";
for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
*size = _IOC_SIZE(*cmd);
*cmd = ioctl_table[i];
if (*size > _IOC_SIZE(*cmd)) {
- printk("ioctl not yet supported\n");
+ pr_info("ioctl not yet supported\n");
return -EFAULT;
}
return 0;
* We do this in order to provide a means to eject floppy disks before
* installing the new fdutils package */
if (cmd == CDROMEJECT || /* CD-ROM eject */
- cmd == 0x6470 /* SunOS floppy eject */ ) {
+ cmd == 0x6470) { /* SunOS floppy eject */
DPRINT("obsolete eject ioctl\n");
DPRINT("please use floppycontrol --eject\n");
cmd = FDEJECT;
}
- /* convert the old style command into a new style command */
- if ((cmd & 0xff00) == 0x0200) {
- ECALL(normalize_ioctl(&cmd, &size));
- } else
+ if (!((cmd & 0xff00) == 0x0200))
return -EINVAL;
+ /* convert the old style command into a new style command */
+ ECALL(normalize_ioctl(&cmd, &size));
+
/* permission checks */
if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
return -EPERM;
+ if (WARN_ON(size < 0 || size > sizeof(inparam)))
+ return -EINVAL;
+
/* copyin */
- CLEARSTRUCT(&inparam);
+ memset(&inparam, 0, sizeof(inparam));
if (_IOC_DIR(cmd) & _IOC_WRITE)
ECALL(fd_copyin((void __user *)param, &inparam, size))
OUT(FDGETFDCSTAT, UFDCS);
case FDWERRORCLR:
- CLEARSTRUCT(UDRWE);
+ memset(UDRWE, 0, sizeof(*UDRWE));
return 0;
OUT(FDWERRORGET, UDRWE);
static void __init config_types(void)
{
- int first = 1;
+ bool has_drive = false;
int drive;
/* read drive info out of physical CMOS */
name = temparea;
}
if (name) {
- const char *prepend = ",";
- if (first) {
- prepend = KERN_INFO "Floppy drive(s):";
- first = 0;
+ const char *prepend;
+ if (!has_drive) {
+ prepend = "";
+ has_drive = true;
+ pr_info("Floppy drive(s):");
+ } else {
+ prepend = ",";
}
- printk("%s fd%d is %s", prepend, drive, name);
+
+ pr_cont("%s fd%d is %s", prepend, drive, name);
}
*UDP = *params;
}
- if (!first)
- printk("\n");
+
+ if (has_drive)
+ pr_cont("\n");
}
static int floppy_release(struct gendisk *disk, fmode_t mode)
INFBOUND(try, 16);
tmp = (char *)fd_dma_mem_alloc(1024 * try);
}
- if (!tmp && !floppy_track_buffer) {
+ if (!tmp && !floppy_track_buffer)
fallback_on_nodma_alloc(&tmp, 2048 * try);
- }
if (!tmp && !floppy_track_buffer) {
DPRINT("Unable to allocate DMA memory\n");
goto out;
* a disk in the drive, and whether that disk is writable.
*/
-static void floppy_rb0_complete(struct bio *bio,
- int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
{
complete((struct completion *)bio->bi_private);
}
if (UTESTF(FD_DISK_CHANGED) ||
UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
if (usage_count == 0) {
- printk("VFS: revalidate called on non-open device.\n");
+ pr_info("VFS: revalidate called on non-open device.\n");
return -EFAULT;
}
lock_fdc(drive, 0);
return res;
}
-static struct block_device_operations floppy_fops = {
+static const struct block_device_operations floppy_fops = {
.owner = THIS_MODULE,
.open = floppy_open,
.release = floppy_release,
output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */
if (FDCS->reset)
return FDC_NONE;
- if ((r = result()) <= 0x00)
+ r = result();
+ if (r <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+ pr_info("FDC %d is an 8272A\n", fdc);
return FDC_8272A; /* 8272a/765 don't know DUMPREGS */
}
if (r != 10) {
- printk
- ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (!fdc_configure()) {
- printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+ pr_info("FDC %d is an 82072\n", fdc);
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}
if (need_more_output() == MORE_OUTPUT) {
output_byte(0);
} else {
- printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+ pr_info("FDC %d is an 82072A\n", fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}
output_byte(FD_UNLOCK);
r = result();
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
- return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
+ pr_info("FDC %d is a pre-1991 82077\n", fdc);
+ return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
* LOCK/UNLOCK */
}
if ((r != 1) || (reply_buffer[0] != 0x00)) {
- printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
output_byte(FD_PARTID);
r = result();
if (r != 1) {
- printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (reply_buffer[0] == 0x80) {
- printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+ pr_info("FDC %d is a post-1991 82077\n", fdc);
return FDC_82077; /* Revised 82077AA passes all the tests */
}
switch (reply_buffer[0] >> 5) {
case 0x0:
/* Either a 82078-1 or a 82078SL running at 5Volt */
- printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+ pr_info("FDC %d is an 82078.\n", fdc);
return FDC_82078;
case 0x1:
- printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+ pr_info("FDC %d is a 44pin 82078\n", fdc);
return FDC_82078;
case 0x2:
- printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+ pr_info("FDC %d is a S82078B\n", fdc);
return FDC_S82078B;
case 0x3:
- printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
- fdc);
+ pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
return FDC_87306;
default:
- printk(KERN_INFO
- "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
- fdc, reply_buffer[0] >> 5);
+ pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+ fdc, reply_buffer[0] >> 5);
return FDC_82078_UNKN;
}
} /* get_fdc_version */
else
param = config_params[i].def_param;
if (config_params[i].fn)
- config_params[i].
- fn(ints, param,
- config_params[i].param2);
+ config_params[i].fn(ints, param,
+ config_params[i].
+ param2);
if (config_params[i].var) {
DPRINT("%s=%d\n", str, param);
*config_params[i].var = param;
DPRINT("allowed options are:");
for (i = 0; i < ARRAY_SIZE(config_params); i++)
- printk(" %s", config_params[i].name);
- printk("\n");
+ pr_cont(" %s", config_params[i].name);
+ pr_cont("\n");
} else
DPRINT("botched floppy option\n");
DPRINT("Read Documentation/blockdev/floppy.txt\n");
static ssize_t floppy_cmos_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct platform_device *p;
+ struct platform_device *p = to_platform_device(dev);
int drive;
- p = container_of(dev, struct platform_device,dev);
drive = p->id;
return sprintf(buf, "%X\n", UDP->cmos);
}
-DEVICE_ATTR(cmos,S_IRUGO,floppy_cmos_show,NULL);
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
static void floppy_device_release(struct device *dev)
{
}
+static int floppy_resume(struct device *dev)
+{
+ int fdc;
+
+ for (fdc = 0; fdc < N_FDC; fdc++)
+ if (FDCS->address != -1)
+ user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+
+ return 0;
+}
+
+static const struct dev_pm_ops floppy_pm_ops = {
+ .resume = floppy_resume,
+ .restore = floppy_resume,
+};
+
+static struct platform_driver floppy_driver = {
+ .driver = {
+ .name = "floppy",
+ .pm = &floppy_pm_ops,
+ },
+};
+
static struct platform_device floppy_device[N_DRIVE];
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
if (err)
goto out_put_disk;
+ err = platform_driver_register(&floppy_driver);
+ if (err)
+ goto out_unreg_blkdev;
+
floppy_queue = blk_init_queue(do_fd_request, &floppy_lock);
if (!floppy_queue) {
err = -ENOMEM;
- goto out_unreg_blkdev;
+ goto out_unreg_driver;
}
- blk_queue_max_sectors(floppy_queue, 64);
+ blk_queue_max_hw_sectors(floppy_queue, 64);
blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
floppy_find, NULL, NULL);
for (i = 0; i < N_FDC; i++) {
fdc = i;
- CLEARSTRUCT(FDCS);
+ memset(FDCS, 0, sizeof(*FDCS));
FDCS->dtr = -1;
FDCS->dor = 0x4;
#if defined(__sparc__) || defined(__mc68000__)
- /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+ /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
#ifdef __mc68000__
if (MACH_IS_SUN3X)
#endif
/* initialise drive state */
for (drive = 0; drive < N_DRIVE; drive++) {
- CLEARSTRUCT(UDRS);
- CLEARSTRUCT(UDRWE);
+ memset(UDRS, 0, sizeof(*UDRS));
+ memset(UDRWE, 0, sizeof(*UDRWE));
USETF(FD_DISK_NEWCHANGE);
USETF(FD_DISK_CHANGED);
USETF(FD_VERIFY);
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
if (err)
goto out_flush_work;
- err = device_create_file(&floppy_device[drive].dev,&dev_attr_cmos);
+ err = device_create_file(&floppy_device[drive].dev,
+ &dev_attr_cmos);
if (err)
goto out_unreg_platform_dev;
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
blk_cleanup_queue(floppy_queue);
+out_unreg_driver:
+ platform_driver_unregister(&floppy_driver);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset,
+ p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n",
+ FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
#ifndef __sparc__
for (drive = 0; drive < N_FDC * 4; drive++)
if (timer_pending(motor_off_timer + drive))
- printk("motor off timer %d still active\n", drive);
+ pr_info("motor off timer %d still active\n", drive);
#endif
if (timer_pending(&fd_timeout))
- printk("floppy timer still active:%s\n", timeout_message);
+ pr_info("floppy timer still active:%s\n", timeout_message);
if (timer_pending(&fd_timer))
- printk("auxiliary floppy timer still active\n");
+ pr_info("auxiliary floppy timer still active\n");
if (work_pending(&floppy_work))
- printk("work still pending\n");
+ pr_info("work still pending\n");
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
char *ptr;
while (*cfg) {
- for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+ ptr = cfg;
+ while (*cfg && *cfg != ' ' && *cfg != '\t')
+ cfg++;
if (*cfg) {
*cfg = '\0';
cfg++;
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
unregister_blkdev(FLOPPY_MAJOR, "fd");
+ platform_driver_unregister(&floppy_driver);
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
/* eject disk, if any */
fd_eject(0);
}
+
module_exit(floppy_module_exit);
module_param(floppy, charp, 0);
MODULE_SUPPORTED_DEVICE("fd");
MODULE_LICENSE("GPL");
+/* This doesn't actually get used other than for module information */
+static const struct pnp_device_id floppy_pnpids[] = {
+ {"PNP0700", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
+
#else
__setup("floppy=", floppy_setup);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff