* Copyright (C) 1993, 1994 Alain Knaff
* Copyright (C) 1998 Alan Cox
*/
+
/*
* 02.12.91 - Changed to static variables to indicate need for reset
* and recalibrate. This makes some things easier (output_byte reset
*/
/*
+ * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
+ */
+
+/*
* 1998/05/07 -- Russell King -- More portability cleanups; moved definition of
* interrupt and dma channel to asm/floppy.h. Cleaned up some formatting &
* use of '0' for NULL.
#define DEBUGT 2
#define DCL_DEBUG /* debug disk change line */
+#ifdef DCL_DEBUG
+#define debug_dcl(test, fmt, args...) \
+ do { if ((test) & FD_DEBUG) DPRINT(fmt, ##args); } while (0)
+#else
+#define debug_dcl(test, fmt, args...) \
+ do { if (0) DPRINT(fmt, ##args); } while (0)
+#endif
+
+
/* do print messages for unexpected interrupts */
static int print_unex = 1;
#include <linux/module.h>
#include <linux/workqueue.h>
#define FDPATCHES
#include <linux/fdreg.h>
-
-/*
- * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
- */
-
#include <linux/fd.h>
#include <linux/hdreg.h>
-
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/bio.h>
#include <linux/string.h>
+#include <linux/jiffies.h>
#include <linux/fcntl.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h> /* CMOS defines */
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/devfs_fs_kernel.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
#include <linux/buffer_head.h> /* for invalidate_buffers() */
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
/*
* PS/2 floppies have much slower step rates than regular floppies.
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
static int FLOPPY_IRQ = 6;
static int FLOPPY_DMA = 2;
*/
static DEFINE_SPINLOCK(floppy_lock);
-static struct completion device_release;
static unsigned short virtual_dma_port = 0x3f0;
-irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+irqreturn_t floppy_interrupt(int irq, void *dev_id);
static int set_dor(int fdc, char mask, char data);
-static void register_devfs_entries(int drive) __init;
#define K_64 0x10000 /* 64KB */
static int irqdma_allocated;
-#define LOCAL_END_REQUEST
-#define DEVICE_NAME "floppy"
-
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/cdrom.h> /* for the compatibility eject ioctl */
static struct request *current_req;
static struct request_queue *floppy_queue;
-static void do_fd_request(request_queue_t * q);
+static void do_fd_request(struct request_queue *q);
#ifndef fd_get_dma_residue
#define fd_get_dma_residue() get_dma_residue(FLOPPY_DMA)
#endif
#ifndef fd_dma_mem_alloc
-#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
+#define fd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL, get_order(size))
#endif
static inline void fallback_on_nodma_alloc(char **addr, size_t l)
return; /* we have the memory */
if (can_use_virtual_dma != 2)
return; /* no fallback allowed */
- printk
- ("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+ pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
*addr = (char *)nodma_mem_alloc(l);
#else
return;
/* End dma memory related stuff */
static unsigned long fake_change;
-static int initialising = 1;
+static bool initialized;
-#define ITYPE(x) (((x)>>2) & 0x1f)
-#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
-#define UNIT(x) ((x) & 0x03) /* drive on fdc */
-#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
+#define ITYPE(x) (((x) >> 2) & 0x1f)
+#define TOMINOR(x) ((x & 3) | ((x & 4) << 5))
+#define UNIT(x) ((x) & 0x03) /* drive on fdc */
+#define FDC(x) (((x) & 0x04) >> 2) /* fdc of drive */
+ /* reverse mapping from unit and fdc to drive */
#define REVDRIVE(fdc, unit) ((unit) + ((fdc) << 2))
- /* reverse mapping from unit and fdc to drive */
-#define DP (&drive_params[current_drive])
-#define DRS (&drive_state[current_drive])
-#define DRWE (&write_errors[current_drive])
-#define FDCS (&fdc_state[fdc])
-#define CLEARF(x) (clear_bit(x##_BIT, &DRS->flags))
-#define SETF(x) (set_bit(x##_BIT, &DRS->flags))
-#define TESTF(x) (test_bit(x##_BIT, &DRS->flags))
-
-#define UDP (&drive_params[drive])
-#define UDRS (&drive_state[drive])
-#define UDRWE (&write_errors[drive])
-#define UFDCS (&fdc_state[FDC(drive)])
-#define UCLEARF(x) (clear_bit(x##_BIT, &UDRS->flags))
-#define USETF(x) (set_bit(x##_BIT, &UDRS->flags))
-#define UTESTF(x) (test_bit(x##_BIT, &UDRS->flags))
-
-#define DPRINT(format, args...) printk(DEVICE_NAME "%d: " format, current_drive , ## args)
-
-#define PH_HEAD(floppy,head) (((((floppy)->stretch & 2) >>1) ^ head) << 2)
-#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
-
-#define CLEARSTRUCT(x) memset((x), 0, sizeof(*(x)))
+
+#define DP (&drive_params[current_drive])
+#define DRS (&drive_state[current_drive])
+#define DRWE (&write_errors[current_drive])
+#define FDCS (&fdc_state[fdc])
+
+#define UDP (&drive_params[drive])
+#define UDRS (&drive_state[drive])
+#define UDRWE (&write_errors[drive])
+#define UFDCS (&fdc_state[FDC(drive)])
+
+#define DPRINT(format, args...) \
+ pr_info("floppy%d: " format, current_drive, ##args)
+
+#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
+#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
/* read/write */
-#define COMMAND raw_cmd->cmd[0]
-#define DR_SELECT raw_cmd->cmd[1]
-#define TRACK raw_cmd->cmd[2]
-#define HEAD raw_cmd->cmd[3]
-#define SECTOR raw_cmd->cmd[4]
-#define SIZECODE raw_cmd->cmd[5]
-#define SECT_PER_TRACK raw_cmd->cmd[6]
-#define GAP raw_cmd->cmd[7]
-#define SIZECODE2 raw_cmd->cmd[8]
+#define COMMAND (raw_cmd->cmd[0])
+#define DR_SELECT (raw_cmd->cmd[1])
+#define TRACK (raw_cmd->cmd[2])
+#define HEAD (raw_cmd->cmd[3])
+#define SECTOR (raw_cmd->cmd[4])
+#define SIZECODE (raw_cmd->cmd[5])
+#define SECT_PER_TRACK (raw_cmd->cmd[6])
+#define GAP (raw_cmd->cmd[7])
+#define SIZECODE2 (raw_cmd->cmd[8])
#define NR_RW 9
/* format */
-#define F_SIZECODE raw_cmd->cmd[2]
-#define F_SECT_PER_TRACK raw_cmd->cmd[3]
-#define F_GAP raw_cmd->cmd[4]
-#define F_FILL raw_cmd->cmd[5]
+#define F_SIZECODE (raw_cmd->cmd[2])
+#define F_SECT_PER_TRACK (raw_cmd->cmd[3])
+#define F_GAP (raw_cmd->cmd[4])
+#define F_FILL (raw_cmd->cmd[5])
#define NR_F 6
/*
- * Maximum disk size (in kilobytes). This default is used whenever the
- * current disk size is unknown.
+ * Maximum disk size (in kilobytes).
+ * This default is used whenever the current disk size is unknown.
* [Now it is rather a minimum]
*/
#define MAX_DISK_SIZE 4 /* 3984 */
#define MAX_REPLIES 16
static unsigned char reply_buffer[MAX_REPLIES];
static int inr; /* size of reply buffer, when called from interrupt */
-#define ST0 (reply_buffer[0])
-#define ST1 (reply_buffer[1])
-#define ST2 (reply_buffer[2])
-#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
-#define R_TRACK (reply_buffer[3])
-#define R_HEAD (reply_buffer[4])
-#define R_SECTOR (reply_buffer[5])
-#define R_SIZECODE (reply_buffer[6])
+#define ST0 (reply_buffer[0])
+#define ST1 (reply_buffer[1])
+#define ST2 (reply_buffer[2])
+#define ST3 (reply_buffer[0]) /* result of GETSTATUS */
+#define R_TRACK (reply_buffer[3])
+#define R_HEAD (reply_buffer[4])
+#define R_SECTOR (reply_buffer[5])
+#define R_SIZECODE (reply_buffer[6])
-#define SEL_DLY (2*HZ/100)
+#define SEL_DLY (2 * HZ / 100)
/*
* this struct defines the different floppy drive types.
static struct timer_list motor_off_timer[N_DRIVE];
static struct gendisk *disks[N_DRIVE];
static struct block_device *opened_bdev[N_DRIVE];
-static DECLARE_MUTEX(open_lock);
+static DEFINE_MUTEX(open_lock);
static struct floppy_raw_cmd *raw_cmd, default_raw_cmd;
/*
* 1581's logical side 0 is on physical side 1, whereas the Sharp's logical
* side 0 is on physical side 0 (but with the misnamed sector IDs).
* 'stretch' should probably be renamed to something more general, like
- * 'options'. Other parameters should be self-explanatory (see also
- * setfdprm(8)).
+ * 'options'.
+ *
+ * Bits 2 through 9 of 'stretch' tell the number of the first sector.
+ * The LSB (bit 2) is flipped. For most disks, the first sector
+ * is 1 (represented by 0x00<<2). For some CP/M and music sampler
+ * disks (such as Ensoniq EPS 16plus) it is 0 (represented as 0x01<<2).
+ * For Amstrad CPC disks it is 0xC1 (represented as 0xC0<<2).
+ *
+ * Other parameters should be self-explanatory (see also setfdprm(8)).
*/
/*
Size
{ 6400,40,2,80,0,0x25,0x5B,0xCF,0x00,"E3200" }, /* 26 3.20MB 3.5" */
{ 7040,44,2,80,0,0x25,0x5B,0xCF,0x00,"E3520" }, /* 27 3.52MB 3.5" */
{ 7680,48,2,80,0,0x25,0x63,0xCF,0x00,"E3840" }, /* 28 3.84MB 3.5" */
-
{ 3680,23,2,80,0,0x1C,0x10,0xCF,0x00,"H1840" }, /* 29 1.84MB 3.5" */
+
{ 1600,10,2,80,0,0x25,0x02,0xDF,0x2E,"D800" }, /* 30 800KB 3.5" */
{ 3200,20,2,80,0,0x1C,0x00,0xCF,0x2C,"H1600" }, /* 31 1.6MB 3.5" */
};
-#define NUMBER(x) (sizeof(x) / sizeof(*(x)))
#define SECTSIZE (_FD_SECTSIZE(*floppy))
/* Auto-detection: Disk type used until the next media change occurs. */
static sector_t floppy_sizes[256];
+static char floppy_device_name[] = "floppy";
+
/*
* The driver is trying to determine the correct media format
* while probing is set. rw_interrupt() clears it after a
static int probing;
/* Synchronization of FDC access. */
-#define FD_COMMAND_NONE -1
-#define FD_COMMAND_ERROR 2
-#define FD_COMMAND_OKAY 3
+#define FD_COMMAND_NONE -1
+#define FD_COMMAND_ERROR 2
+#define FD_COMMAND_OKAY 3
static volatile int command_status = FD_COMMAND_NONE;
static unsigned long fdc_busy;
static DECLARE_WAIT_QUEUE_HEAD(command_done);
#define NO_SIGNAL (!interruptible || !signal_pending(current))
-#define CALL(x) if ((x) == -EINTR) return -EINTR
-#define ECALL(x) if ((ret = (x))) return ret;
-#define _WAIT(x,i) CALL(ret=wait_til_done((x),i))
-#define WAIT(x) _WAIT((x),interruptible)
-#define IWAIT(x) _WAIT((x),1)
/* Errors during formatting are counted here. */
static int format_errors;
static int max_buffer_sectors;
static int *errors;
-typedef void (*done_f) (int);
+typedef void (*done_f)(int);
static struct cont_t {
- void (*interrupt) (void); /* this is called after the interrupt of the
- * main command */
- void (*redo) (void); /* this is called to retry the operation */
- void (*error) (void); /* this is called to tally an error */
+ void (*interrupt)(void);
+ /* this is called after the interrupt of the
+ * main command */
+ void (*redo)(void); /* this is called to retry the operation */
+ void (*error)(void); /* this is called to tally an error */
done_f done; /* this is called to say if the operation has
* succeeded/failed */
} *cont;
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
* reset doesn't need to be tested before sending commands, because
* output_byte is automatically disabled when reset is set.
*/
-#define CHECK_RESET { if (FDCS->reset){ reset_fdc(); return; } }
static void reset_fdc(void);
/*
* information to interrupts. They are the data used for the current
* request.
*/
-#define NO_TRACK -1
-#define NEED_1_RECAL -2
-#define NEED_2_RECAL -3
+#define NO_TRACK -1
+#define NEED_1_RECAL -2
+#define NEED_2_RECAL -3
static int usage_count;
static inline void debugt(const char *message)
{
if (DP->flags & DEBUGT)
- printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+ pr_info("%s dtime=%lu\n", message, jiffies - debugtimer);
}
#else
static inline void set_debugt(void) { }
static inline void debugt(const char *message) { }
#endif /* DEBUGT */
-typedef void (*timeout_fn) (unsigned long);
-static struct timer_list fd_timeout = TIMER_INITIALIZER(floppy_shutdown, 0, 0);
+typedef void (*timeout_fn)(unsigned long);
+static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);
static const char *timeout_message;
static void is_alive(const char *message)
{
/* this routine checks whether the floppy driver is "alive" */
- if (test_bit(0, &fdc_busy) && command_status < 2
- && !timer_pending(&fd_timeout)) {
+ if (test_bit(0, &fdc_busy) && command_status < 2 &&
+ !timer_pending(&fd_timeout)) {
DPRINT("timeout handler died: %s\n", message);
}
}
#endif
-static void (*do_floppy) (void) = NULL;
+static void (*do_floppy)(void) = NULL;
#ifdef FLOPPY_SANITY_CHECK
#define OLOGSIZE 20
-static void (*lasthandler) (void);
+static void (*lasthandler)(void);
static unsigned long interruptjiffies;
static unsigned long resultjiffies;
static int resultsize;
if (drive == current_reqD)
drive = current_drive;
del_timer(&fd_timeout);
- if (drive < 0 || drive > N_DRIVE) {
+ if (drive < 0 || drive >= N_DRIVE) {
fd_timeout.expires = jiffies + 20UL * HZ;
drive = 0;
} else
fd_timeout.expires = jiffies + UDP->timeout;
add_timer(&fd_timeout);
- if (UDP->flags & FD_DEBUG) {
- DPRINT("reschedule timeout ");
- printk(message, marg);
- printk("\n");
- }
+ if (UDP->flags & FD_DEBUG)
+ DPRINT("reschedule timeout %s %d\n", message, marg);
timeout_message = message;
}
spin_unlock_irqrestore(&floppy_lock, flags);
}
-#define INFBOUND(a,b) (a)=max_t(int, a, b)
-
-#define SUPBOUND(a,b) (a)=min_t(int, a, b)
+#define INFBOUND(a, b) (a) = max_t(int, a, b)
+#define SUPBOUND(a, b) (a) = min_t(int, a, b)
/*
* Bottom half floppy driver.
static int disk_change(int drive)
{
int fdc = FDC(drive);
+
#ifdef FLOPPY_SANITY_CHECK
- if (jiffies - UDRS->select_date < UDP->select_delay)
+ if (time_before(jiffies, UDRS->select_date + UDP->select_delay))
DPRINT("WARNING disk change called early\n");
if (!(FDCS->dor & (0x10 << UNIT(drive))) ||
(FDCS->dor & 3) != UNIT(drive) || fdc != FDC(drive)) {
}
#endif
-#ifdef DCL_DEBUG
- if (UDP->flags & FD_DEBUG) {
- DPRINT("checking disk change line for drive %d\n", drive);
- DPRINT("jiffies=%lu\n", jiffies);
- DPRINT("disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
- DPRINT("flags=%lx\n", UDRS->flags);
- }
-#endif
+ debug_dcl(UDP->flags,
+ "checking disk change line for drive %d\n", drive);
+ debug_dcl(UDP->flags, "jiffies=%lu\n", jiffies);
+ debug_dcl(UDP->flags, "disk change line=%x\n", fd_inb(FD_DIR) & 0x80);
+ debug_dcl(UDP->flags, "flags=%lx\n", UDRS->flags);
+
if (UDP->flags & FD_BROKEN_DCL)
- return UTESTF(FD_DISK_CHANGED);
+ return test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
if ((fd_inb(FD_DIR) ^ UDP->flags) & 0x80) {
- USETF(FD_VERIFY); /* verify write protection */
- if (UDRS->maxblock) {
- /* mark it changed */
- USETF(FD_DISK_CHANGED);
- }
+ set_bit(FD_VERIFY_BIT, &UDRS->flags);
+ /* verify write protection */
+
+ if (UDRS->maxblock) /* mark it changed */
+ set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
/* invalidate its geometry */
if (UDRS->keep_data >= 0) {
floppy_sizes[TOMINOR(drive)] = MAX_DISK_SIZE << 1;
}
- /*USETF(FD_DISK_NEWCHANGE); */
return 1;
} else {
UDRS->last_checked = jiffies;
- UCLEARF(FD_DISK_NEWCHANGE);
+ clear_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
}
return 0;
}
return ((dor & (0x10 << unit)) && (dor & 3) == unit);
}
+static bool is_ready_state(int status)
+{
+ int state = status & (STATUS_READY | STATUS_DIR | STATUS_DMA);
+ return state == STATUS_READY;
+}
+
static int set_dor(int fdc, char mask, char data)
{
- register unsigned char drive, unit, newdor, olddor;
+ unsigned char unit;
+ unsigned char drive;
+ unsigned char newdor;
+ unsigned char olddor;
if (FDCS->address == -1)
return -1;
unit = olddor & 0x3;
if (is_selected(olddor, unit) && !is_selected(newdor, unit)) {
drive = REVDRIVE(fdc, unit);
-#ifdef DCL_DEBUG
- if (UDP->flags & FD_DEBUG) {
- DPRINT("calling disk change from set_dor\n");
- }
-#endif
+ debug_dcl(UDP->flags,
+ "calling disk change from set_dor\n");
disk_change(drive);
}
FDCS->dor = newdor;
UDRS->select_date = jiffies;
}
}
- /*
- * We should propagate failures to grab the resources back
- * nicely from here. Actually we ought to rewrite the fd
- * driver some day too.
- */
- if (newdor & FLOPPY_MOTOR_MASK)
- floppy_grab_irq_and_dma();
- if (olddor & FLOPPY_MOTOR_MASK)
- floppy_release_irq_and_dma();
return olddor;
}
DRS->select_date = jiffies;
}
-/* reset all driver information about the current fdc. This is needed after
- * a reset, and after a raw command. */
+/*
+ * Reset all driver information about the current fdc.
+ * This is needed after a reset, and after a raw command.
+ */
static void reset_fdc_info(int mode)
{
int drive;
current_drive = drive;
}
if (fdc != 1 && fdc != 0) {
- printk("bad fdc value\n");
+ pr_info("bad fdc value\n");
return;
}
set_dor(fdc, ~0, 8);
}
/* locks the driver */
-static int _lock_fdc(int drive, int interruptible, int line)
+static int _lock_fdc(int drive, bool interruptible, int line)
{
if (!usage_count) {
- printk(KERN_ERR
- "Trying to lock fdc while usage count=0 at line %d\n",
+ pr_err("Trying to lock fdc while usage count=0 at line %d\n",
line);
return -1;
}
- if (floppy_grab_irq_and_dma() == -1)
- return -EBUSY;
if (test_and_set_bit(0, &fdc_busy)) {
DECLARE_WAITQUEUE(wait, current);
set_current_state(TASK_RUNNING);
remove_wait_queue(&fdc_wait, &wait);
+ flush_scheduled_work();
}
command_status = FD_COMMAND_NONE;
return 0;
}
-#define lock_fdc(drive,interruptible) _lock_fdc(drive,interruptible, __LINE__)
-
-#define LOCK_FDC(drive,interruptible) \
-if (lock_fdc(drive,interruptible)) return -EINTR;
+#define lock_fdc(drive, interruptible) \
+ _lock_fdc(drive, interruptible, __LINE__)
/* unlocks the driver */
static inline void unlock_fdc(void)
del_timer(&fd_timeout);
cont = NULL;
clear_bit(0, &fdc_busy);
- if (elv_next_request(floppy_queue))
+ if (current_req || blk_peek_request(floppy_queue))
do_fd_request(floppy_queue);
spin_unlock_irqrestore(&floppy_lock, flags);
- floppy_release_irq_and_dma();
wake_up(&fdc_wait);
}
static void floppy_off(unsigned int drive)
{
unsigned long volatile delta;
- register int fdc = FDC(drive);
+ int fdc = FDC(drive);
if (!(FDCS->dor & (0x10 << UNIT(drive))))
return;
*/
static void scandrives(void)
{
- int i, drive, saved_drive;
+ int i;
+ int drive;
+ int saved_drive;
if (DP->select_delay)
return;
{
}
-static DECLARE_WORK(floppy_work, NULL, NULL);
+static DECLARE_WORK(floppy_work, NULL);
-static void schedule_bh(void (*handler) (void))
+static void schedule_bh(void (*handler)(void))
{
- PREPARE_WORK(&floppy_work, (void (*)(void *))handler, NULL);
+ PREPARE_WORK(&floppy_work, (work_func_t)handler);
schedule_work(&floppy_work);
}
-static struct timer_list fd_timer = TIMER_INITIALIZER(NULL, 0, 0);
+static DEFINE_TIMER(fd_timer, NULL, 0, 0);
static void cancel_activity(void)
{
spin_lock_irqsave(&floppy_lock, flags);
do_floppy = NULL;
- PREPARE_WORK(&floppy_work, (void *)empty, NULL);
+ PREPARE_WORK(&floppy_work, (work_func_t)empty);
del_timer(&fd_timer);
spin_unlock_irqrestore(&floppy_lock, flags);
}
* transfer */
static void fd_watchdog(void)
{
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("calling disk change from watchdog\n");
- }
-#endif
+ debug_dcl(DP->flags, "calling disk change from watchdog\n");
if (disk_change(current_drive)) {
DPRINT("disk removed during i/o\n");
reset_fdc();
} else {
del_timer(&fd_timer);
- fd_timer.function = (timeout_fn) fd_watchdog;
+ fd_timer.function = (timeout_fn)fd_watchdog;
fd_timer.expires = jiffies + HZ / 10;
add_timer(&fd_timer);
}
return 1;
}
- if ((signed)(jiffies - delay) < 0) {
+ if (time_before(jiffies, delay)) {
del_timer(&fd_timer);
fd_timer.function = function;
fd_timer.expires = delay;
if (raw_cmd->length == 0) {
int i;
- printk("zero dma transfer size:");
+ pr_info("zero dma transfer size:");
for (i = 0; i < raw_cmd->cmd_count; i++)
- printk("%x,", raw_cmd->cmd[i]);
- printk("\n");
+ pr_cont("%x,", raw_cmd->cmd[i]);
+ pr_cont("\n");
cont->done(0);
FDCS->reset = 1;
return;
}
if (((unsigned long)raw_cmd->kernel_data) % 512) {
- printk("non aligned address: %p\n", raw_cmd->kernel_data);
+ pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
cont->done(0);
FDCS->reset = 1;
return;
/* waits until the fdc becomes ready */
static int wait_til_ready(void)
{
- int counter, status;
+ int status;
+ int counter;
+
if (FDCS->reset)
return -1;
for (counter = 0; counter < 10000; counter++) {
if (status & STATUS_READY)
return status;
}
- if (!initialising) {
+ if (initialized) {
DPRINT("Getstatus times out (%x) on fdc %d\n", status, fdc);
show_floppy();
}
/* sends a command byte to the fdc */
static int output_byte(char byte)
{
- int status;
+ int status = wait_til_ready();
- if ((status = wait_til_ready()) < 0)
+ if (status < 0)
return -1;
- if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY) {
+
+ if (is_ready_state(status)) {
fd_outb(byte, FD_DATA);
#ifdef FLOPPY_SANITY_CHECK
output_log[output_log_pos].data = byte;
return 0;
}
FDCS->reset = 1;
- if (!initialising) {
+ if (initialized) {
DPRINT("Unable to send byte %x to FDC. Fdc=%x Status=%x\n",
byte, fdc, status);
show_floppy();
return -1;
}
-#define LAST_OUT(x) if (output_byte(x)<0){ reset_fdc();return;}
-
/* gets the response from the fdc */
static int result(void)
{
- int i, status = 0;
+ int i;
+ int status = 0;
for (i = 0; i < MAX_REPLIES; i++) {
- if ((status = wait_til_ready()) < 0)
+ status = wait_til_ready();
+ if (status < 0)
break;
status &= STATUS_DIR | STATUS_READY | STATUS_BUSY | STATUS_DMA;
if ((status & ~STATUS_BUSY) == STATUS_READY) {
else
break;
}
- if (!initialising) {
- DPRINT
- ("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
- fdc, status, i);
+ if (initialized) {
+ DPRINT("get result error. Fdc=%d Last status=%x Read bytes=%d\n",
+ fdc, status, i);
show_floppy();
}
FDCS->reset = 1;
/* does the fdc need more output? */
static int need_more_output(void)
{
- int status;
- if ((status = wait_til_ready()) < 0)
+ int status = wait_til_ready();
+
+ if (status < 0)
return -1;
- if ((status & (STATUS_READY | STATUS_DIR | STATUS_DMA)) == STATUS_READY)
+
+ if (is_ready_state(status))
return MORE_OUTPUT;
+
return result();
}
default:
DPRINT("Invalid data rate for perpendicular mode!\n");
cont->done(0);
- FDCS->reset = 1; /* convenient way to return to
- * redo without to much hassle (deep
- * stack et al. */
+ FDCS->reset = 1;
+ /*
+ * convenient way to return to
+ * redo without too much hassle
+ * (deep stack et al.)
+ */
return;
}
} else
*/
static void fdc_specify(void)
{
- unsigned char spec1, spec2;
- unsigned long srt, hlt, hut;
+ unsigned char spec1;
+ unsigned char spec2;
+ unsigned long srt;
+ unsigned long hlt;
+ unsigned long hut;
unsigned long dtr = NOMINAL_DTR;
unsigned long scale_dtr = NOMINAL_DTR;
int hlt_max_code = 0x7f;
if (FDCS->need_configure && FDCS->version >= FDC_82072A) {
fdc_configure();
FDCS->need_configure = 0;
- /*DPRINT("FIFO enabled\n"); */
}
switch (raw_cmd->rate & 0x03) {
}
/* Convert step rate from microseconds to milliseconds and 4 bits */
- srt = 16 - (DP->srt * scale_dtr / 1000 + NOMINAL_DTR - 1) / NOMINAL_DTR;
- if (slow_floppy) {
+ srt = 16 - DIV_ROUND_UP(DP->srt * scale_dtr / 1000, NOMINAL_DTR);
+ if (slow_floppy)
srt = srt / 4;
- }
+
SUPBOUND(srt, 0xf);
INFBOUND(srt, 0);
- hlt = (DP->hlt * scale_dtr / 2 + NOMINAL_DTR - 1) / NOMINAL_DTR;
+ hlt = DIV_ROUND_UP(DP->hlt * scale_dtr / 2, NOMINAL_DTR);
if (hlt < 0x01)
hlt = 0x01;
else if (hlt > 0x7f)
hlt = hlt_max_code;
- hut = (DP->hut * scale_dtr / 16 + NOMINAL_DTR - 1) / NOMINAL_DTR;
+ hut = DIV_ROUND_UP(DP->hut * scale_dtr / 16, NOMINAL_DTR);
if (hut < 0x1)
hut = 0x1;
else if (hut > 0xf)
* Pause 5 msec to avoid trouble. (Needs to be 2 jiffies)
*/
FDCS->dtr = raw_cmd->rate & 3;
- return (fd_wait_for_completion(jiffies + 2UL * HZ / 100,
- (timeout_fn) floppy_ready));
+ return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
+ (timeout_fn)floppy_ready);
} /* fdc_dtr */
static void tell_sector(void)
{
- printk(": track %d, head %d, sector %d, size %d",
- R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+ pr_cont(": track %d, head %d, sector %d, size %d",
+ R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
} /* tell_sector */
+static void print_errors(void)
+{
+ DPRINT("");
+ if (ST0 & ST0_ECE) {
+ pr_cont("Recalibrate failed!");
+ } else if (ST2 & ST2_CRC) {
+ pr_cont("data CRC error");
+ tell_sector();
+ } else if (ST1 & ST1_CRC) {
+ pr_cont("CRC error");
+ tell_sector();
+ } else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+ (ST2 & ST2_MAM)) {
+ if (!probing) {
+ pr_cont("sector not found");
+ tell_sector();
+ } else
+ pr_cont("probe failed...");
+ } else if (ST2 & ST2_WC) { /* seek error */
+ pr_cont("wrong cylinder");
+ } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
+ pr_cont("bad cylinder");
+ } else {
+ pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+ ST0, ST1, ST2);
+ tell_sector();
+ }
+ pr_cont("\n");
+}
+
/*
* OK, this error interpreting routine is called after a
* DMA read/write has succeeded
bad = 1;
if (ST1 & ST1_WP) {
DPRINT("Drive is write protected\n");
- CLEARF(FD_DISK_WRITABLE);
+ clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
cont->done(0);
bad = 2;
} else if (ST1 & ST1_ND) {
- SETF(FD_NEED_TWADDLE);
+ set_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
} else if (ST1 & ST1_OR) {
if (DP->flags & FTD_MSG)
DPRINT("Over/Underrun - retrying\n");
bad = 0;
} else if (*errors >= DP->max_errors.reporting) {
- DPRINT("");
- if (ST0 & ST0_ECE) {
- printk("Recalibrate failed!");
- } else if (ST2 & ST2_CRC) {
- printk("data CRC error");
- tell_sector();
- } else if (ST1 & ST1_CRC) {
- printk("CRC error");
- tell_sector();
- } else if ((ST1 & (ST1_MAM | ST1_ND))
- || (ST2 & ST2_MAM)) {
- if (!probing) {
- printk("sector not found");
- tell_sector();
- } else
- printk("probe failed...");
- } else if (ST2 & ST2_WC) { /* seek error */
- printk("wrong cylinder");
- } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
- printk("bad cylinder");
- } else {
- printk
- ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
- ST0, ST1, ST2);
- tell_sector();
- }
- printk("\n");
-
+ print_errors();
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
*/
static void setup_rw_floppy(void)
{
- int i, r, flags, dflags;
+ int i;
+ int r;
+ int flags;
+ int dflags;
unsigned long ready_date;
timeout_fn function;
* again just before spinup completion. Beware that
* after scandrives, we must again wait for selection.
*/
- if ((signed)(ready_date - jiffies) > DP->select_delay) {
+ if (time_after(ready_date, jiffies + DP->select_delay)) {
ready_date -= DP->select_delay;
- function = (timeout_fn) floppy_start;
+ function = (timeout_fn)floppy_start;
} else
- function = (timeout_fn) setup_rw_floppy;
+ function = (timeout_fn)setup_rw_floppy;
/* wait until the floppy is spinning fast enough */
if (fd_wait_for_completion(ready_date, function))
return;
}
if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of effective seek\n");
- DPRINT("jiffies=%lu\n", jiffies);
- }
-#endif
- CLEARF(FD_DISK_NEWCHANGE); /* effective seek */
+ debug_dcl(DP->flags,
+ "clearing NEWCHANGE flag because of effective seek\n");
+ debug_dcl(DP->flags, "jiffies=%lu\n", jiffies);
+ clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+ /* effective seek */
DRS->select_date = jiffies;
}
DRS->track = ST1;
static void check_wp(void)
{
- if (TESTF(FD_VERIFY)) {
- /* check write protection */
+ if (test_bit(FD_VERIFY_BIT, &DRS->flags)) {
+ /* check write protection */
output_byte(FD_GETSTATUS);
output_byte(UNIT(current_drive));
if (result() != 1) {
FDCS->reset = 1;
return;
}
- CLEARF(FD_VERIFY);
- CLEARF(FD_NEED_TWADDLE);
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("checking whether disk is write protected\n");
- DPRINT("wp=%x\n", ST3 & 0x40);
- }
-#endif
+ clear_bit(FD_VERIFY_BIT, &DRS->flags);
+ clear_bit(FD_NEED_TWADDLE_BIT, &DRS->flags);
+ debug_dcl(DP->flags,
+ "checking whether disk is write protected\n");
+ debug_dcl(DP->flags, "wp=%x\n", ST3 & 0x40);
if (!(ST3 & 0x40))
- SETF(FD_DISK_WRITABLE);
+ set_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
else
- CLEARF(FD_DISK_WRITABLE);
+ clear_bit(FD_DISK_WRITABLE_BIT, &DRS->flags);
}
}
blind_seek = 0;
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("calling disk change from seek\n");
- }
-#endif
+ debug_dcl(DP->flags, "calling disk change from seek\n");
- if (!TESTF(FD_DISK_NEWCHANGE) &&
+ if (!test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
disk_change(current_drive) && (raw_cmd->flags & FD_RAW_NEED_DISK)) {
/* the media changed flag should be cleared after the seek.
* If it isn't, this means that there is really no disk in
* the drive.
*/
- SETF(FD_DISK_CHANGED);
+ set_bit(FD_DISK_CHANGED_BIT, &DRS->flags);
cont->done(0);
cont->redo();
return;
if (DRS->track <= NEED_1_RECAL) {
recalibrate_floppy();
return;
- } else if (TESTF(FD_DISK_NEWCHANGE) &&
+ } else if (test_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags) &&
(raw_cmd->flags & FD_RAW_NEED_DISK) &&
(DRS->track <= NO_TRACK || DRS->track == raw_cmd->track)) {
/* we seek to clear the media-changed condition. Does anybody
do_floppy = seek_interrupt;
output_byte(FD_SEEK);
output_byte(UNIT(current_drive));
- LAST_OUT(track);
+ if (output_byte(track) < 0) {
+ reset_fdc();
+ return;
+ }
debugt("seek command:");
}
* not to move at recalibration is to
* be already at track 0.) Clear the
* new change flag */
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of second recalibrate\n");
- }
-#endif
+ debug_dcl(DP->flags,
+ "clearing NEWCHANGE flag because of second recalibrate\n");
- CLEARF(FD_DISK_NEWCHANGE);
+ clear_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
DRS->select_date = jiffies;
/* fall through */
default:
DPRINT("%s ", message);
if (inr >= 0)
for (i = 0; i < inr; i++)
- printk("repl[%d]=%x ", i, reply_buffer[i]);
- printk("\n");
+ pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+ pr_cont("\n");
}
/* interrupt handler. Note that this can be called externally on the Sparc */
-irqreturn_t floppy_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t floppy_interrupt(int irq, void *dev_id)
{
- void (*handler) (void) = do_floppy;
int do_print;
unsigned long f;
+ void (*handler)(void) = do_floppy;
lasthandler = handler;
interruptjiffies = jiffies;
do_floppy = NULL;
if (fdc >= N_FDC || FDCS->address == -1) {
/* we don't even know which FDC is the culprit */
- printk("DOR0=%x\n", fdc_state[0].dor);
- printk("floppy interrupt on bizarre fdc %d\n", fdc);
- printk("handler=%p\n", handler);
+ pr_info("DOR0=%x\n", fdc_state[0].dor);
+ pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+ pr_info("handler=%p\n", handler);
is_alive("bizarre fdc");
return IRQ_NONE;
}
* activity.
*/
- do_print = !handler && print_unex && !initialising;
+ do_print = !handler && print_unex && initialized;
inr = result();
if (do_print)
if (do_print)
print_result("sensei", inr);
max_sensei--;
- } while ((ST0 & 0x83) != UNIT(current_drive) && inr == 2
- && max_sensei);
+ } while ((ST0 & 0x83) != UNIT(current_drive) &&
+ inr == 2 && max_sensei);
}
if (!handler) {
FDCS->reset = 1;
debugt("recalibrate floppy:");
do_floppy = recal_interrupt;
output_byte(FD_RECALIBRATE);
- LAST_OUT(UNIT(current_drive));
+ if (output_byte(UNIT(current_drive)) < 0) {
+ reset_fdc();
+ return;
+ }
}
/*
debugt("reset interrupt:");
result(); /* get the status ready for set_fdc */
if (FDCS->reset) {
- printk("reset set in interrupt, calling %p\n", cont->error);
+ pr_info("reset set in interrupt, calling %p\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
}
cont->redo();
{
int i;
- printk("\n");
- printk("floppy driver state\n");
- printk("-------------------\n");
- printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
- jiffies, interruptjiffies, jiffies - interruptjiffies,
- lasthandler);
+ pr_info("\n");
+ pr_info("floppy driver state\n");
+ pr_info("-------------------\n");
+ pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
+ jiffies, interruptjiffies, jiffies - interruptjiffies,
+ lasthandler);
#ifdef FLOPPY_SANITY_CHECK
- printk("timeout_message=%s\n", timeout_message);
- printk("last output bytes:\n");
+ pr_info("timeout_message=%s\n", timeout_message);
+ pr_info("last output bytes:\n");
for (i = 0; i < OLOGSIZE; i++)
- printk("%2x %2x %lu\n",
- output_log[(i + output_log_pos) % OLOGSIZE].data,
- output_log[(i + output_log_pos) % OLOGSIZE].status,
- output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
- printk("last result at %lu\n", resultjiffies);
- printk("last redo_fd_request at %lu\n", lastredo);
- for (i = 0; i < resultsize; i++) {
- printk("%2x ", reply_buffer[i]);
- }
- printk("\n");
+ pr_info("%2x %2x %lu\n",
+ output_log[(i + output_log_pos) % OLOGSIZE].data,
+ output_log[(i + output_log_pos) % OLOGSIZE].status,
+ output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+ pr_info("last result at %lu\n", resultjiffies);
+ pr_info("last redo_fd_request at %lu\n", lastredo);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+ reply_buffer, resultsize, true);
#endif
- printk("status=%x\n", fd_inb(FD_STATUS));
- printk("fdc_busy=%lu\n", fdc_busy);
+ pr_info("status=%x\n", fd_inb(FD_STATUS));
+ pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
- printk("do_floppy=%p\n", do_floppy);
- if (floppy_work.pending)
- printk("floppy_work.func=%p\n", floppy_work.func);
+ pr_info("do_floppy=%p\n", do_floppy);
+ if (work_pending(&floppy_work))
+ pr_info("floppy_work.func=%p\n", floppy_work.func);
if (timer_pending(&fd_timer))
- printk("fd_timer.function=%p\n", fd_timer.function);
+ pr_info("fd_timer.function=%p\n", fd_timer.function);
if (timer_pending(&fd_timeout)) {
- printk("timer_function=%p\n", fd_timeout.function);
- printk("expires=%lu\n", fd_timeout.expires - jiffies);
- printk("now=%lu\n", jiffies);
- }
- printk("cont=%p\n", cont);
- printk("current_req=%p\n", current_req);
- printk("command_status=%d\n", command_status);
- printk("\n");
+ pr_info("timer_function=%p\n", fd_timeout.function);
+ pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+ pr_info("now=%lu\n", jiffies);
+ }
+ pr_info("cont=%p\n", cont);
+ pr_info("current_req=%p\n", current_req);
+ pr_info("command_status=%d\n", command_status);
+ pr_info("\n");
}
static void floppy_shutdown(unsigned long data)
{
unsigned long flags;
- if (!initialising)
+ if (initialized)
show_floppy();
cancel_activity();
/* avoid dma going to a random drive after shutdown */
- if (!initialising)
+ if (initialized)
DPRINT("floppy timeout called\n");
FDCS->reset = 1;
if (cont) {
cont->done(0);
cont->redo(); /* this will recall reset when needed */
} else {
- printk("no cont in shutdown!\n");
+ pr_info("no cont in shutdown!\n");
process_fd_request();
}
is_alive("floppy shutdown");
}
-/*typedef void (*timeout_fn)(unsigned long);*/
-
/* start motor, check media-changed condition and write protection */
-static int start_motor(void (*function) (void))
+static int start_motor(void (*function)(void))
{
- int mask, data;
+ int mask;
+ int data;
mask = 0xfc;
data = UNIT(current_drive);
set_dor(fdc, mask, data);
/* wait_for_completion also schedules reset if needed. */
- return (fd_wait_for_completion(DRS->select_date + DP->select_delay,
- (timeout_fn) function));
+ return fd_wait_for_completion(DRS->select_date + DP->select_delay,
+ (timeout_fn)function);
}
static void floppy_ready(void)
{
- CHECK_RESET;
+ if (FDCS->reset) {
+ reset_fdc();
+ return;
+ }
if (start_motor(floppy_ready))
return;
if (fdc_dtr())
return;
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("calling disk change from floppy_ready\n");
- }
-#endif
+ debug_dcl(DP->flags, "calling disk change from floppy_ready\n");
if (!(raw_cmd->flags & FD_RAW_NO_MOTOR) &&
disk_change(current_drive) && !DP->select_delay)
- twaddle(); /* this clears the dcl on certain drive/controller
- * combinations */
+ twaddle(); /* this clears the dcl on certain
+ * drive/controller combinations */
#ifdef fd_chose_dma_mode
if ((raw_cmd->flags & FD_RAW_READ) || (raw_cmd->flags & FD_RAW_WRITE)) {
reschedule_timeout(current_reqD, "floppy start", 0);
scandrives();
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("setting NEWCHANGE in floppy_start\n");
- }
-#endif
- SETF(FD_DISK_NEWCHANGE);
+ debug_dcl(DP->flags, "setting NEWCHANGE in floppy_start\n");
+ set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
floppy_ready();
}
.interrupt = empty,
.redo = do_wakeup,
.error = empty,
- .done = (done_f) empty
+ .done = (done_f)empty
};
static struct cont_t intr_cont = {
.interrupt = empty,
.redo = process_fd_request,
.error = empty,
- .done = (done_f) empty
+ .done = (done_f)empty
};
-static int wait_til_done(void (*handler) (void), int interruptible)
+static int wait_til_done(void (*handler)(void), bool interruptible)
{
int ret;
break;
is_alive("wait_til_done");
-
schedule();
}
static void set_floppy(int drive)
{
int type = ITYPE(UDRS->fd_device);
+
if (type)
_floppy = floppy_type + type;
else
}
#define CODE2SIZE (ssize = ((1 << SIZECODE) + 3) >> 2)
-#define FM_MODE(x,y) ((y) & ~(((x)->rate & 0x80) >>1))
+#define FM_MODE(x, y) ((y) & ~(((x)->rate & 0x80) >> 1))
#define CT(x) ((x) | 0xc0)
+
static void setup_format_params(int track)
{
+ int n;
+ int il;
+ int count;
+ int head_shift;
+ int track_shift;
struct fparm {
unsigned char track, head, sect, size;
} *here = (struct fparm *)floppy_track_buffer;
- int il, n;
- int count, head_shift, track_shift;
raw_cmd = &default_raw_cmd;
raw_cmd->track = track;
- raw_cmd->flags = FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
- FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK;
+ raw_cmd->flags = (FD_RAW_WRITE | FD_RAW_INTR | FD_RAW_SPIN |
+ FD_RAW_NEED_DISK | FD_RAW_NEED_SEEK);
raw_cmd->rate = _floppy->rate & 0x43;
raw_cmd->cmd_count = NR_F;
COMMAND = FM_MODE(_floppy, FD_FORMAT);
}
}
}
- if (_floppy->stretch & FD_ZEROBASED) {
+ if (_floppy->stretch & FD_SECTBASEMASK) {
for (count = 0; count < F_SECT_PER_TRACK; count++)
- here[count].sect--;
+ here[count].sect += FD_SECTBASE(_floppy) - 1;
}
}
{
int ret;
- LOCK_FDC(drive, 1);
+ if (lock_fdc(drive, true))
+ return -EINTR;
+
set_floppy(drive);
if (!_floppy ||
_floppy->track > DP->tracks ||
format_errors = 0;
cont = &format_cont;
errors = &format_errors;
- IWAIT(redo_format);
+ ret = wait_til_done(redo_format, true);
+ if (ret == -EINTR)
+ return -EINTR;
process_fd_request();
return ret;
}
* =============================
*/
-static void floppy_end_request(struct request *req, int uptodate)
+static void floppy_end_request(struct request *req, int error)
{
unsigned int nr_sectors = current_count_sectors;
+ unsigned int drive = (unsigned long)req->rq_disk->private_data;
/* current_count_sectors can be zero if transfer failed */
- if (!uptodate)
- nr_sectors = req->current_nr_sectors;
- if (end_that_request_first(req, uptodate, nr_sectors))
+ if (error)
+ nr_sectors = blk_rq_cur_sectors(req);
+ if (__blk_end_request(req, error, nr_sectors << 9))
return;
- add_disk_randomness(req->rq_disk);
- floppy_off((long)req->rq_disk->private_data);
- blkdev_dequeue_request(req);
- end_that_request_last(req);
/* We're done with the request */
+ floppy_off(drive);
current_req = NULL;
}
int block;
probing = 0;
- reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+ reschedule_timeout(MAXTIMEOUT, "request done", uptodate);
if (!req) {
- printk("floppy.c: no request in request_done\n");
+ pr_info("floppy.c: no request in request_done\n");
return;
}
if (uptodate) {
/* maintain values for invalidation on geometry
* change */
- block = current_count_sectors + req->sector;
+ block = current_count_sectors + blk_rq_pos(req);
INFBOUND(DRS->maxblock, block);
if (block > _floppy->sect)
DRS->maxtrack = 1;
/* unlock chained buffers */
spin_lock_irqsave(q->queue_lock, flags);
- floppy_end_request(req, 1);
+ floppy_end_request(req, 0);
spin_unlock_irqrestore(q->queue_lock, flags);
} else {
if (rq_data_dir(req) == WRITE) {
/* record write error information */
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
- DRWE->first_error_sector = req->sector;
+ DRWE->first_error_sector = blk_rq_pos(req);
DRWE->first_error_generation = DRS->generation;
}
- DRWE->last_error_sector = req->sector;
+ DRWE->last_error_sector = blk_rq_pos(req);
DRWE->last_error_generation = DRS->generation;
}
spin_lock_irqsave(q->queue_lock, flags);
- floppy_end_request(req, 0);
+ floppy_end_request(req, -EIO);
spin_unlock_irqrestore(q->queue_lock, flags);
}
}
/* Interrupt handler evaluating the result of the r/w operation */
static void rw_interrupt(void)
{
- int nr_sectors, ssize, eoc, heads;
+ int eoc;
+ int ssize;
+ int heads;
+ int nr_sectors;
if (R_HEAD >= 2) {
/* some Toshiba floppy controllers occasionnally seem to
#ifdef FLOPPY_SANITY_CHECK
if (nr_sectors / ssize >
- (in_sector_offset + current_count_sectors + ssize - 1) / ssize) {
+ DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
DPRINT("long rw: %x instead of %lx\n",
nr_sectors, current_count_sectors);
- printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
- printk("rh=%d h=%d\n", R_HEAD, HEAD);
- printk("rt=%d t=%d\n", R_TRACK, TRACK);
- printk("heads=%d eoc=%d\n", heads, eoc);
- printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
- fsector_t, ssize);
- printk("in_sector_offset=%d\n", in_sector_offset);
+ pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+ pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+ pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+ pr_info("heads=%d eoc=%d\n", heads, eoc);
+ pr_info("spt=%d st=%d ss=%d\n",
+ SECT_PER_TRACK, fsector_t, ssize);
+ pr_info("in_sector_offset=%d\n", in_sector_offset);
}
#endif
/* Compute maximal contiguous buffer size. */
static int buffer_chain_size(void)
{
- struct bio *bio;
struct bio_vec *bv;
- int size, i;
+ int size;
+ struct req_iterator iter;
char *base;
base = bio_data(current_req->bio);
size = 0;
- rq_for_each_bio(bio, current_req) {
- bio_for_each_segment(bv, bio, i) {
- if (page_address(bv->bv_page) + bv->bv_offset !=
- base + size)
- break;
+ rq_for_each_segment(bv, current_req, iter) {
+ if (page_address(bv->bv_page) + bv->bv_offset != base + size)
+ break;
- size += bv->bv_len;
- }
+ size += bv->bv_len;
}
return size >> 9;
{
int remaining; /* number of transferred 512-byte sectors */
struct bio_vec *bv;
- struct bio *bio;
- char *buffer, *dma_buffer;
- int size, i;
+ char *buffer;
+ char *dma_buffer;
+ int size;
+ struct req_iterator iter;
max_sector = transfer_size(ssize,
min(max_sector, max_sector_2),
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
- buffer_max > fsector_t + current_req->nr_sectors)
+ buffer_max > fsector_t + blk_rq_sectors(current_req))
current_count_sectors = min_t(int, buffer_max - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
remaining = current_count_sectors << 9;
#ifdef FLOPPY_SANITY_CHECK
- if ((remaining >> 9) > current_req->nr_sectors &&
- CT(COMMAND) == FD_WRITE) {
+ if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
- printk("current_count_sectors=%ld\n", current_count_sectors);
- printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%ld\n",
- current_req->nr_sectors);
- printk("current_req->current_nr_sectors=%u\n",
- current_req->current_nr_sectors);
- printk("max_sector=%d\n", max_sector);
- printk("ssize=%d\n", ssize);
+ pr_info("current_count_sectors=%ld\n", current_count_sectors);
+ pr_info("remaining=%d\n", remaining >> 9);
+ pr_info("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
+ pr_info("current_req->current_nr_sectors=%u\n",
+ blk_rq_cur_sectors(current_req));
+ pr_info("max_sector=%d\n", max_sector);
+ pr_info("ssize=%d\n", ssize);
}
#endif
dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
- size = current_req->current_nr_sectors << 9;
+ size = blk_rq_cur_bytes(current_req);
- rq_for_each_bio(bio, current_req) {
- bio_for_each_segment(bv, bio, i) {
- if (!remaining)
- break;
+ rq_for_each_segment(bv, current_req, iter) {
+ if (!remaining)
+ break;
- size = bv->bv_len;
- SUPBOUND(size, remaining);
+ size = bv->bv_len;
+ SUPBOUND(size, remaining);
- buffer = page_address(bv->bv_page) + bv->bv_offset;
+ buffer = page_address(bv->bv_page) + bv->bv_offset;
#ifdef FLOPPY_SANITY_CHECK
- if (dma_buffer + size >
- floppy_track_buffer + (max_buffer_sectors << 10) ||
- dma_buffer < floppy_track_buffer) {
- DPRINT("buffer overrun in copy buffer %d\n",
- (int)((floppy_track_buffer -
- dma_buffer) >> 9));
- printk("fsector_t=%d buffer_min=%d\n",
- fsector_t, buffer_min);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
- if (CT(COMMAND) == FD_READ)
- printk("read\n");
- if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
- break;
- }
- if (((unsigned long)buffer) % 512)
- DPRINT("%p buffer not aligned\n", buffer);
-#endif
+ if (dma_buffer + size >
+ floppy_track_buffer + (max_buffer_sectors << 10) ||
+ dma_buffer < floppy_track_buffer) {
+ DPRINT("buffer overrun in copy buffer %d\n",
+ (int)((floppy_track_buffer - dma_buffer) >> 9));
+ pr_info("fsector_t=%d buffer_min=%d\n",
+ fsector_t, buffer_min);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- memcpy(buffer, dma_buffer, size);
- else
- memcpy(dma_buffer, buffer, size);
-
- remaining -= size;
- dma_buffer += size;
+ pr_info("read\n");
+ if (CT(COMMAND) == FD_WRITE)
+ pr_info("write\n");
+ break;
}
+ if (((unsigned long)buffer) % 512)
+ DPRINT("%p buffer not aligned\n", buffer);
+#endif
+ if (CT(COMMAND) == FD_READ)
+ memcpy(buffer, dma_buffer, size);
+ else
+ memcpy(dma_buffer, buffer, size);
+
+ remaining -= size;
+ dma_buffer += size;
}
#ifdef FLOPPY_SANITY_CHECK
if (remaining) {
#endif
}
-#if 0
-static inline int check_dma_crossing(char *start,
- unsigned long length, char *message)
-{
- if (CROSS_64KB(start, length)) {
- printk("DMA xfer crosses 64KB boundary in %s %p-%p\n",
- message, start, start + length);
- return 1;
- } else
- return 0;
-}
-#endif
-
/* work around a bug in pseudo DMA
* (on some FDCs) pseudo DMA does not stop when the CPU stops
* sending data. Hence we need a different way to signal the
*/
static void virtualdmabug_workaround(void)
{
- int hard_sectors, end_sector;
+ int hard_sectors;
+ int end_sector;
if (CT(COMMAND) == FD_WRITE) {
COMMAND &= ~0x80; /* switch off multiple track mode */
end_sector = SECTOR + hard_sectors - 1;
#ifdef FLOPPY_SANITY_CHECK
if (end_sector > SECT_PER_TRACK) {
- printk("too many sectors %d > %d\n",
- end_sector, SECT_PER_TRACK);
+ pr_info("too many sectors %d > %d\n",
+ end_sector, SECT_PER_TRACK);
return;
}
#endif
- SECT_PER_TRACK = end_sector; /* make sure SECT_PER_TRACK points
- * to end of transfer */
+ SECT_PER_TRACK = end_sector;
+ /* make sure SECT_PER_TRACK
+ * points to end of transfer */
}
}
static int make_raw_rw_request(void)
{
int aligned_sector_t;
- int max_sector, max_size, tracksize, ssize;
+ int max_sector;
+ int max_size;
+ int tracksize;
+ int ssize;
if (max_buffer_sectors == 0) {
- printk("VFS: Block I/O scheduled on unopened device\n");
+ pr_info("VFS: Block I/O scheduled on unopened device\n");
return 0;
}
max_sector = _floppy->sect * _floppy->head;
- TRACK = (int)current_req->sector / max_sector;
- fsector_t = (int)current_req->sector % max_sector;
+ TRACK = (int)blk_rq_pos(current_req) / max_sector;
+ fsector_t = (int)blk_rq_pos(current_req) % max_sector;
if (_floppy->track && TRACK >= _floppy->track) {
- if (current_req->current_nr_sectors & 1) {
+ if (blk_rq_cur_sectors(current_req) & 1) {
current_count_sectors = 1;
return 1;
} else
}
HEAD = fsector_t / _floppy->sect;
- if (((_floppy->stretch & (FD_SWAPSIDES | FD_ZEROBASED)) ||
- TESTF(FD_NEED_TWADDLE)) && fsector_t < _floppy->sect)
+ if (((_floppy->stretch & (FD_SWAPSIDES | FD_SECTBASEMASK)) ||
+ test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags)) &&
+ fsector_t < _floppy->sect)
max_sector = _floppy->sect;
/* 2M disks have phantom sectors on the first track */
if (fsector_t >= max_sector) {
current_count_sectors =
min_t(int, _floppy->sect - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
return 1;
}
SIZECODE = 2;
CODE2SIZE;
SECT_PER_TRACK = _floppy->sect << 2 >> SIZECODE;
SECTOR = ((fsector_t % _floppy->sect) << 2 >> SIZECODE) +
- ((_floppy->stretch & FD_ZEROBASED) ? 0 : 1);
+ FD_SECTBASE(_floppy);
/* tracksize describes the size which can be filled up with sectors
* of size ssize.
in_sector_offset = (fsector_t % _floppy->sect) % ssize;
aligned_sector_t = fsector_t - in_sector_offset;
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
if ((raw_cmd->track == buffer_track) &&
(current_drive == buffer_drive) &&
(fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
copy_buffer(1, max_sector, buffer_max);
return 1;
}
- } else if (in_sector_offset || current_req->nr_sectors < ssize) {
+ } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
- if (fsector_t + current_req->nr_sectors > ssize &&
- fsector_t + current_req->nr_sectors < ssize + ssize)
+ unsigned int sectors;
+
+ sectors = fsector_t + blk_rq_sectors(current_req);
+ if (sectors > ssize && sectors < ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
* on a 64 bit machine!
*/
max_size = buffer_chain_size();
- dma_limit =
- (MAX_DMA_ADDRESS -
- ((unsigned long)current_req->buffer)) >> 9;
- if ((unsigned long)max_size > dma_limit) {
+ dma_limit = (MAX_DMA_ADDRESS -
+ ((unsigned long)current_req->buffer)) >> 9;
+ if ((unsigned long)max_size > dma_limit)
max_size = dma_limit;
- }
/* 64 kb boundaries */
if (CROSS_64KB(current_req->buffer, max_size << 9))
max_size = (K_64 -
if (!direct ||
(indirect * 2 > direct * 3 &&
*errors < DP->max_errors.read_track &&
- /*!TESTF(FD_NEED_TWADDLE) && */
- ((!probing
- || (DP->read_track & (1 << DRS->probed_format)))))) {
- max_size = current_req->nr_sectors;
+ ((!probing ||
+ (DP->read_track & (1 << DRS->probed_format)))))) {
+ max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
if (raw_cmd->length == 0) {
- DPRINT
- ("zero dma transfer attempted from make_raw_request\n");
- DPRINT("indirect=%d direct=%d fsector_t=%d",
+ DPRINT("zero dma transfer attempted from make_raw_request\n");
+ DPRINT("indirect=%d direct=%d fsector_t=%d\n",
indirect, direct, fsector_t);
return 0;
}
-/* check_dma_crossing(raw_cmd->kernel_data,
- raw_cmd->length,
- "end of make_raw_request [1]");*/
-
virtualdmabug_workaround();
return 2;
}
fsector_t > buffer_max ||
fsector_t < buffer_min ||
((CT(COMMAND) == FD_READ ||
- (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+ (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
- max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
- /* not enough space */
- ) {
+ max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)) {
+ /* not enough space */
buffer_track = -1;
buffer_drive = current_drive;
buffer_max = buffer_min = aligned_sector_t;
}
raw_cmd->kernel_data = floppy_track_buffer +
- ((aligned_sector_t - buffer_min) << 9);
+ ((aligned_sector_t - buffer_min) << 9);
if (CT(COMMAND) == FD_WRITE) {
/* copy write buffer to track buffer.
raw_cmd->length = ((raw_cmd->length - 1) | (ssize - 1)) + 1;
raw_cmd->length <<= 9;
#ifdef FLOPPY_SANITY_CHECK
- /*check_dma_crossing(raw_cmd->kernel_data, raw_cmd->length,
- "end of make_raw_request"); */
if ((raw_cmd->length < current_count_sectors << 9) ||
(raw_cmd->kernel_data != current_req->buffer &&
CT(COMMAND) == FD_WRITE &&
DPRINT("fractionary current count b=%lx s=%lx\n",
raw_cmd->length, current_count_sectors);
if (raw_cmd->kernel_data != current_req->buffer)
- printk("addr=%d, length=%ld\n",
- (int)((raw_cmd->kernel_data -
- floppy_track_buffer) >> 9),
- current_count_sectors);
- printk("st=%d ast=%d mse=%d msi=%d\n",
- fsector_t, aligned_sector_t, max_sector, max_size);
- printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
- printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
- COMMAND, SECTOR, HEAD, TRACK);
- printk("buffer drive=%d\n", buffer_drive);
- printk("buffer track=%d\n", buffer_track);
- printk("buffer_min=%d\n", buffer_min);
- printk("buffer_max=%d\n", buffer_max);
+ pr_info("addr=%d, length=%ld\n",
+ (int)((raw_cmd->kernel_data -
+ floppy_track_buffer) >> 9),
+ current_count_sectors);
+ pr_info("st=%d ast=%d mse=%d msi=%d\n",
+ fsector_t, aligned_sector_t, max_sector, max_size);
+ pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+ pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+ COMMAND, SECTOR, HEAD, TRACK);
+ pr_info("buffer drive=%d\n", buffer_drive);
+ pr_info("buffer track=%d\n", buffer_track);
+ pr_info("buffer_min=%d\n", buffer_min);
+ pr_info("buffer_max=%d\n", buffer_max);
return 0;
}
raw_cmd->kernel_data + raw_cmd->length >
floppy_track_buffer + (max_buffer_sectors << 10)) {
DPRINT("buffer overrun in schedule dma\n");
- printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
- fsector_t, buffer_min, raw_cmd->length >> 9);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+ fsector_t, buffer_min, raw_cmd->length >> 9);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
return 0;
}
- } else if (raw_cmd->length > current_req->nr_sectors << 9 ||
- current_count_sectors > current_req->nr_sectors) {
+ } else if (raw_cmd->length > blk_rq_bytes(current_req) ||
+ current_count_sectors > blk_rq_sectors(current_req)) {
DPRINT("buffer overrun in direct transfer\n");
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
DPRINT("more sectors than bytes\n");
- printk("bytes=%ld\n", raw_cmd->length >> 9);
- printk("sectors=%ld\n", current_count_sectors);
+ pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+ pr_info("sectors=%ld\n", current_count_sectors);
}
if (raw_cmd->length == 0) {
DPRINT("zero dma transfer attempted from make_raw_request\n");
struct request *req;
spin_lock_irq(floppy_queue->queue_lock);
- req = elv_next_request(floppy_queue);
+ req = blk_fetch_request(floppy_queue);
spin_unlock_irq(floppy_queue->queue_lock);
if (!req) {
do_floppy = NULL;
return;
disk_change(current_drive);
if (test_bit(current_drive, &fake_change) ||
- TESTF(FD_DISK_CHANGED)) {
+ test_bit(FD_DISK_CHANGED_BIT, &DRS->flags)) {
DPRINT("disk absent or changed during operation\n");
REPEAT;
}
continue;
}
- if (TESTF(FD_NEED_TWADDLE))
+ if (test_bit(FD_NEED_TWADDLE_BIT, &DRS->flags))
twaddle();
schedule_bh(floppy_start);
debugt("queue fd request");
schedule_bh(redo_fd_request);
}
-static void do_fd_request(request_queue_t * q)
+static void do_fd_request(struct request_queue *q)
{
if (max_buffer_sectors == 0) {
- printk("VFS: do_fd_request called on non-open device\n");
+ pr_info("VFS: do_fd_request called on non-open device\n");
return;
}
if (usage_count == 0) {
- printk("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- printk("sect=%ld flags=%lx\n", (long)current_req->sector,
- current_req->flags);
+ pr_info("warning: usage count=0, current_req=%p exiting\n",
+ current_req);
+ pr_info("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
is_alive("do fd request, old request running");
return;
}
- lock_fdc(MAXTIMEOUT, 0);
+ lock_fdc(MAXTIMEOUT, false);
process_fd_request();
is_alive("do fd request");
}
.done = generic_done
};
-static int poll_drive(int interruptible, int flag)
+static int poll_drive(bool interruptible, int flag)
{
- int ret;
/* no auto-sense, just clear dcl */
raw_cmd = &default_raw_cmd;
raw_cmd->flags = flag;
raw_cmd->track = 0;
raw_cmd->cmd_count = 0;
cont = &poll_cont;
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("setting NEWCHANGE in poll_drive\n");
- }
-#endif
- SETF(FD_DISK_NEWCHANGE);
- WAIT(floppy_ready);
- return ret;
+ debug_dcl(DP->flags, "setting NEWCHANGE in poll_drive\n");
+ set_bit(FD_DISK_NEWCHANGE_BIT, &DRS->flags);
+
+ return wait_til_done(floppy_ready, interruptible);
}
/*
static void reset_intr(void)
{
- printk("weird, reset interrupt called\n");
+ pr_info("weird, reset interrupt called\n");
}
static struct cont_t reset_cont = {
.done = generic_done
};
-static int user_reset_fdc(int drive, int arg, int interruptible)
+static int user_reset_fdc(int drive, int arg, bool interruptible)
{
int ret;
- ret = 0;
- LOCK_FDC(drive, interruptible);
+ if (lock_fdc(drive, interruptible))
+ return -EINTR;
+
if (arg == FD_RESET_ALWAYS)
FDCS->reset = 1;
if (FDCS->reset) {
cont = &reset_cont;
- WAIT(reset_fdc);
+ ret = wait_til_done(reset_fdc, interruptible);
+ if (ret == -EINTR)
+ return -EINTR;
}
process_fd_request();
- return ret;
+ return 0;
}
/*
return copy_to_user(param, address, size) ? -EFAULT : 0;
}
-static inline int fd_copyin(void __user *param, void *address, unsigned long size)
+static inline int fd_copyin(void __user *param, void *address,
+ unsigned long size)
{
return copy_from_user(address, param, size) ? -EFAULT : 0;
}
-#define _COPYOUT(x) (copy_to_user((void __user *)param, &(x), sizeof(x)) ? -EFAULT : 0)
-#define _COPYIN(x) (copy_from_user(&(x), (void __user *)param, sizeof(x)) ? -EFAULT : 0)
-
-#define COPYOUT(x) ECALL(_COPYOUT(x))
-#define COPYIN(x) ECALL(_COPYIN(x))
-
static inline const char *drive_name(int type, int drive)
{
struct floppy_struct *floppy;
int ret;
while (ptr) {
- COPYOUT(*ptr);
+ ret = copy_to_user((void __user *)param, ptr, sizeof(*ptr));
+ if (ret)
+ return -EFAULT;
param += sizeof(struct floppy_raw_cmd);
if ((ptr->flags & FD_RAW_READ) && ptr->buffer_length) {
- if (ptr->length >= 0
- && ptr->length <= ptr->buffer_length)
- ECALL(fd_copyout
- (ptr->data, ptr->kernel_data,
- ptr->buffer_length - ptr->length));
+ if (ptr->length >= 0 &&
+ ptr->length <= ptr->buffer_length) {
+ long length = ptr->buffer_length - ptr->length;
+ ret = fd_copyout(ptr->data, ptr->kernel_data,
+ length);
+ if (ret)
+ return ret;
+ }
}
ptr = ptr->next;
}
static void raw_cmd_free(struct floppy_raw_cmd **ptr)
{
- struct floppy_raw_cmd *next, *this;
+ struct floppy_raw_cmd *next;
+ struct floppy_raw_cmd *this;
this = *ptr;
*ptr = NULL;
if (!ptr)
return -ENOMEM;
*rcmd = ptr;
- COPYIN(*ptr);
+ ret = copy_from_user(ptr, (void __user *)param, sizeof(*ptr));
+ if (ret)
+ return -EFAULT;
ptr->next = NULL;
ptr->buffer_length = 0;
param += sizeof(struct floppy_raw_cmd);
return -ENOMEM;
ptr->buffer_length = ptr->length;
}
- if (ptr->flags & FD_RAW_WRITE)
- ECALL(fd_copyin(ptr->data, ptr->kernel_data,
- ptr->length));
+ if (ptr->flags & FD_RAW_WRITE) {
+ ret = fd_copyin(ptr->data, ptr->kernel_data,
+ ptr->length);
+ if (ret)
+ return ret;
+ }
rcmd = &(ptr->next);
if (!(ptr->flags & FD_RAW_MORE))
return 0;
static int raw_cmd_ioctl(int cmd, void __user *param)
{
- int drive, ret, ret2;
struct floppy_raw_cmd *my_raw_cmd;
+ int drive;
+ int ret2;
+ int ret;
if (FDCS->rawcmd <= 1)
FDCS->rawcmd = 1;
raw_cmd = my_raw_cmd;
cont = &raw_cmd_cont;
- ret = wait_til_done(floppy_start, 1);
-#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT("calling disk change from raw_cmd ioctl\n");
- }
-#endif
+ ret = wait_til_done(floppy_start, true);
+ debug_dcl(DP->flags, "calling disk change from raw_cmd ioctl\n");
if (ret != -EINTR && FDCS->reset)
ret = -EIO;
g->head <= 0 ||
g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) ||
/* check if reserved bits are set */
- (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_ZEROBASED)) != 0)
+ (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0)
return -EINVAL;
if (type) {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- down(&open_lock);
- LOCK_FDC(drive, 1);
+ mutex_lock(&open_lock);
+ if (lock_fdc(drive, true)) {
+ mutex_unlock(&open_lock);
+ return -EINTR;
+ }
floppy_type[type] = *g;
floppy_type[type].name = "user format";
for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
struct block_device *bdev = opened_bdev[cnt];
if (!bdev || ITYPE(drive_state[cnt].fd_device) != type)
continue;
- __invalidate_device(bdev, 0);
+ __invalidate_device(bdev);
}
- up(&open_lock);
+ mutex_unlock(&open_lock);
} else {
int oldStretch;
- LOCK_FDC(drive, 1);
- if (cmd != FDDEFPRM)
+
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ if (cmd != FDDEFPRM) {
/* notice a disk change immediately, else
* we lose our settings immediately*/
- CALL(poll_drive(1, FD_RAW_NEED_DISK));
+ if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+ return -EINTR;
+ }
oldStretch = g->stretch;
user_params[drive] = *g;
if (buffer_drive == drive)
if (DRS->maxblock > user_params[drive].sect ||
DRS->maxtrack ||
((user_params[drive].sect ^ oldStretch) &
- (FD_SWAPSIDES | FD_ZEROBASED)))
+ (FD_SWAPSIDES | FD_SECTBASEMASK)))
invalidate_drive(bdev);
else
process_fd_request();
*size = _IOC_SIZE(*cmd);
*cmd = ioctl_table[i];
if (*size > _IOC_SIZE(*cmd)) {
- printk("ioctl not yet supported\n");
+ pr_info("ioctl not yet supported\n");
return -EFAULT;
}
return 0;
if (type)
*g = &floppy_type[type];
else {
- LOCK_FDC(drive, 0);
- CALL(poll_drive(0, 0));
+ if (lock_fdc(drive, false))
+ return -EINTR;
+ if (poll_drive(false, 0) == -EINTR)
+ return -EINTR;
process_fd_request();
*g = current_type[drive];
}
return 0;
}
-static int fd_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
+static int fd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+ int drive = (long)bdev->bd_disk->private_data;
+ int type = ITYPE(drive_state[drive].fd_device);
+ struct floppy_struct *g;
+ int ret;
+
+ ret = get_floppy_geometry(drive, type, &g);
+ if (ret)
+ return ret;
+
+ geo->heads = g->head;
+ geo->sectors = g->sect;
+ geo->cylinders = g->track;
+ return 0;
+}
+
+static int fd_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd,
unsigned long param)
{
-#define FD_IOCTL_ALLOWED ((filp) && (filp)->private_data)
-#define OUT(c,x) case c: outparam = (const char *) (x); break
-#define IN(c,x,tag) case c: *(x) = inparam. tag ; return 0
+#define FD_IOCTL_ALLOWED (mode & (FMODE_WRITE|FMODE_WRITE_IOCTL))
- int drive = (long)inode->i_bdev->bd_disk->private_data;
- int i, type = ITYPE(UDRS->fd_device);
+ int drive = (long)bdev->bd_disk->private_data;
+ int type = ITYPE(UDRS->fd_device);
+ int i;
int ret;
int size;
union inparam {
* We do this in order to provide a means to eject floppy disks before
* installing the new fdutils package */
if (cmd == CDROMEJECT || /* CD-ROM eject */
- cmd == 0x6470 /* SunOS floppy eject */ ) {
+ cmd == 0x6470) { /* SunOS floppy eject */
DPRINT("obsolete eject ioctl\n");
DPRINT("please use floppycontrol --eject\n");
cmd = FDEJECT;
}
- /* generic block device ioctls */
- switch (cmd) {
- /* the following have been inspired by the corresponding
- * code for other block devices. */
- struct floppy_struct *g;
- case HDIO_GETGEO:
- {
- struct hd_geometry loc;
- ECALL(get_floppy_geometry(drive, type, &g));
- loc.heads = g->head;
- loc.sectors = g->sect;
- loc.cylinders = g->track;
- loc.start = 0;
- return _COPYOUT(loc);
- }
- }
+ if (!((cmd & 0xff00) == 0x0200))
+ return -EINVAL;
/* convert the old style command into a new style command */
- if ((cmd & 0xff00) == 0x0200) {
- ECALL(normalize_ioctl(&cmd, &size));
- } else
- return -EINVAL;
+ ret = normalize_ioctl(&cmd, &size);
+ if (ret)
+ return ret;
/* permission checks */
if (((cmd & 0x40) && !FD_IOCTL_ALLOWED) ||
((cmd & 0x80) && !capable(CAP_SYS_ADMIN)))
return -EPERM;
+ if (WARN_ON(size < 0 || size > sizeof(inparam)))
+ return -EINVAL;
+
/* copyin */
- CLEARSTRUCT(&inparam);
- if (_IOC_DIR(cmd) & _IOC_WRITE)
- ECALL(fd_copyin((void __user *)param, &inparam, size))
-
- switch (cmd) {
- case FDEJECT:
- if (UDRS->fd_ref != 1)
- /* somebody else has this drive open */
- return -EBUSY;
- LOCK_FDC(drive, 1);
-
- /* do the actual eject. Fails on
- * non-Sparc architectures */
- ret = fd_eject(UNIT(drive));
-
- USETF(FD_DISK_CHANGED);
- USETF(FD_VERIFY);
- process_fd_request();
+ memset(&inparam, 0, sizeof(inparam));
+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
+ ret = fd_copyin((void __user *)param, &inparam, size);
+ if (ret)
return ret;
- case FDCLRPRM:
- LOCK_FDC(drive, 1);
- current_type[drive] = NULL;
- floppy_sizes[drive] = MAX_DISK_SIZE << 1;
- UDRS->keep_data = 0;
- return invalidate_drive(inode->i_bdev);
- case FDSETPRM:
- case FDDEFPRM:
- return set_geometry(cmd, &inparam.g,
- drive, type, inode->i_bdev);
- case FDGETPRM:
- ECALL(get_floppy_geometry(drive, type,
- (struct floppy_struct **)
- &outparam));
- break;
-
- case FDMSGON:
- UDP->flags |= FTD_MSG;
- return 0;
- case FDMSGOFF:
- UDP->flags &= ~FTD_MSG;
- return 0;
-
- case FDFMTBEG:
- LOCK_FDC(drive, 1);
- CALL(poll_drive(1, FD_RAW_NEED_DISK));
- ret = UDRS->flags;
- process_fd_request();
- if (ret & FD_VERIFY)
- return -ENODEV;
- if (!(ret & FD_DISK_WRITABLE))
- return -EROFS;
- return 0;
- case FDFMTTRK:
- if (UDRS->fd_ref != 1)
- return -EBUSY;
- return do_format(drive, &inparam.f);
- case FDFMTEND:
- case FDFLUSH:
- LOCK_FDC(drive, 1);
- return invalidate_drive(inode->i_bdev);
-
- case FDSETEMSGTRESH:
- UDP->max_errors.reporting =
- (unsigned short)(param & 0x0f);
- return 0;
- OUT(FDGETMAXERRS, &UDP->max_errors);
- IN(FDSETMAXERRS, &UDP->max_errors, max_errors);
-
- case FDGETDRVTYP:
- outparam = drive_name(type, drive);
- SUPBOUND(size, strlen(outparam) + 1);
- break;
-
- IN(FDSETDRVPRM, UDP, dp);
- OUT(FDGETDRVPRM, UDP);
-
- case FDPOLLDRVSTAT:
- LOCK_FDC(drive, 1);
- CALL(poll_drive(1, FD_RAW_NEED_DISK));
- process_fd_request();
- /* fall through */
- OUT(FDGETDRVSTAT, UDRS);
-
- case FDRESET:
- return user_reset_fdc(drive, (int)param, 1);
-
- OUT(FDGETFDCSTAT, UFDCS);
-
- case FDWERRORCLR:
- CLEARSTRUCT(UDRWE);
- return 0;
- OUT(FDWERRORGET, UDRWE);
-
- case FDRAWCMD:
- if (type)
- return -EINVAL;
- LOCK_FDC(drive, 1);
- set_floppy(drive);
- CALL(i = raw_cmd_ioctl(cmd, (void __user *)param));
- process_fd_request();
- return i;
-
- case FDTWADDLE:
- LOCK_FDC(drive, 1);
- twaddle();
- process_fd_request();
- return 0;
+ }
- default:
+ switch (cmd) {
+ case FDEJECT:
+ if (UDRS->fd_ref != 1)
+ /* somebody else has this drive open */
+ return -EBUSY;
+ if (lock_fdc(drive, true))
+ return -EINTR;
+
+ /* do the actual eject. Fails on
+ * non-Sparc architectures */
+ ret = fd_eject(UNIT(drive));
+
+ set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+ set_bit(FD_VERIFY_BIT, &UDRS->flags);
+ process_fd_request();
+ return ret;
+ case FDCLRPRM:
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ current_type[drive] = NULL;
+ floppy_sizes[drive] = MAX_DISK_SIZE << 1;
+ UDRS->keep_data = 0;
+ return invalidate_drive(bdev);
+ case FDSETPRM:
+ case FDDEFPRM:
+ return set_geometry(cmd, &inparam.g, drive, type, bdev);
+ case FDGETPRM:
+ ret = get_floppy_geometry(drive, type,
+ (struct floppy_struct **)
+ &outparam);
+ if (ret)
+ return ret;
+ break;
+ case FDMSGON:
+ UDP->flags |= FTD_MSG;
+ return 0;
+ case FDMSGOFF:
+ UDP->flags &= ~FTD_MSG;
+ return 0;
+ case FDFMTBEG:
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+ return -EINTR;
+ ret = UDRS->flags;
+ process_fd_request();
+ if (ret & FD_VERIFY)
+ return -ENODEV;
+ if (!(ret & FD_DISK_WRITABLE))
+ return -EROFS;
+ return 0;
+ case FDFMTTRK:
+ if (UDRS->fd_ref != 1)
+ return -EBUSY;
+ return do_format(drive, &inparam.f);
+ case FDFMTEND:
+ case FDFLUSH:
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ return invalidate_drive(bdev);
+ case FDSETEMSGTRESH:
+ UDP->max_errors.reporting = (unsigned short)(param & 0x0f);
+ return 0;
+ case FDGETMAXERRS:
+ outparam = (const char *)&UDP->max_errors;
+ break;
+ case FDSETMAXERRS:
+ UDP->max_errors = inparam.max_errors;
+ break;
+ case FDGETDRVTYP:
+ outparam = drive_name(type, drive);
+ SUPBOUND(size, strlen(outparam) + 1);
+ break;
+ case FDSETDRVPRM:
+ *UDP = inparam.dp;
+ break;
+ case FDGETDRVPRM:
+ outparam = (const char *)UDP;
+ break;
+ case FDPOLLDRVSTAT:
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ if (poll_drive(true, FD_RAW_NEED_DISK) == -EINTR)
+ return -EINTR;
+ process_fd_request();
+ /* fall through */
+ case FDGETDRVSTAT:
+ outparam = (const char *)UDRS;
+ break;
+ case FDRESET:
+ return user_reset_fdc(drive, (int)param, true);
+ case FDGETFDCSTAT:
+ outparam = (const char *)UFDCS;
+ break;
+ case FDWERRORCLR:
+ memset(UDRWE, 0, sizeof(*UDRWE));
+ return 0;
+ case FDWERRORGET:
+ outparam = (const char *)UDRWE;
+ break;
+ case FDRAWCMD:
+ if (type)
return -EINVAL;
- }
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ set_floppy(drive);
+ i = raw_cmd_ioctl(cmd, (void __user *)param);
+ if (i == -EINTR)
+ return -EINTR;
+ process_fd_request();
+ return i;
+ case FDTWADDLE:
+ if (lock_fdc(drive, true))
+ return -EINTR;
+ twaddle();
+ process_fd_request();
+ return 0;
+ default:
+ return -EINVAL;
+ }
if (_IOC_DIR(cmd) & _IOC_READ)
return fd_copyout((void __user *)param, outparam, size);
- else
- return 0;
-#undef OUT
-#undef IN
+
+ return 0;
}
static void __init config_types(void)
{
- int first = 1;
+ bool has_drive = false;
int drive;
/* read drive info out of physical CMOS */
if (!UDP->cmos && FLOPPY1_TYPE)
UDP->cmos = FLOPPY1_TYPE;
- /* XXX */
- /* additional physical CMOS drive detection should go here */
+ /* FIXME: additional physical CMOS drive detection should go here */
for (drive = 0; drive < N_DRIVE; drive++) {
unsigned int type = UDP->cmos;
const char *name = NULL;
static char temparea[32];
- if (type < NUMBER(default_drive_params)) {
+ if (type < ARRAY_SIZE(default_drive_params)) {
params = &default_drive_params[type].params;
if (type) {
name = default_drive_params[type].name;
name = temparea;
}
if (name) {
- const char *prepend = ",";
- if (first) {
- prepend = KERN_INFO "Floppy drive(s):";
- first = 0;
+ const char *prepend;
+ if (!has_drive) {
+ prepend = "";
+ has_drive = true;
+ pr_info("Floppy drive(s):");
+ } else {
+ prepend = ",";
}
- printk("%s fd%d is %s", prepend, drive, name);
- register_devfs_entries(drive);
+
+ pr_cont("%s fd%d is %s", prepend, drive, name);
}
*UDP = *params;
}
- if (!first)
- printk("\n");
+
+ if (has_drive)
+ pr_cont("\n");
}
-static int floppy_release(struct inode *inode, struct file *filp)
+static int floppy_release(struct gendisk *disk, fmode_t mode)
{
- int drive = (long)inode->i_bdev->bd_disk->private_data;
+ int drive = (long)disk->private_data;
- down(&open_lock);
+ mutex_lock(&open_lock);
if (UDRS->fd_ref < 0)
UDRS->fd_ref = 0;
else if (!UDRS->fd_ref--) {
}
if (!UDRS->fd_ref)
opened_bdev[drive] = NULL;
- floppy_release_irq_and_dma();
- up(&open_lock);
+ mutex_unlock(&open_lock);
+
return 0;
}
* /dev/PS0 etc), and disallows simultaneous access to the same
* drive with different device numbers.
*/
-static int floppy_open(struct inode *inode, struct file *filp)
+static int floppy_open(struct block_device *bdev, fmode_t mode)
{
- int drive = (long)inode->i_bdev->bd_disk->private_data;
- int old_dev;
+ int drive = (long)bdev->bd_disk->private_data;
+ int old_dev, new_dev;
int try;
int res = -EBUSY;
char *tmp;
- filp->private_data = (void *)0;
- down(&open_lock);
+ mutex_lock(&open_lock);
old_dev = UDRS->fd_device;
- if (opened_bdev[drive] && opened_bdev[drive] != inode->i_bdev)
+ if (opened_bdev[drive] && opened_bdev[drive] != bdev)
goto out2;
if (!UDRS->fd_ref && (UDP->flags & FD_BROKEN_DCL)) {
- USETF(FD_DISK_CHANGED);
- USETF(FD_VERIFY);
+ set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+ set_bit(FD_VERIFY_BIT, &UDRS->flags);
}
- if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (filp->f_flags & O_EXCL)))
+ if (UDRS->fd_ref == -1 || (UDRS->fd_ref && (mode & FMODE_EXCL)))
goto out2;
- if (floppy_grab_irq_and_dma())
- goto out2;
-
- if (filp->f_flags & O_EXCL)
+ if (mode & FMODE_EXCL)
UDRS->fd_ref = -1;
else
UDRS->fd_ref++;
- opened_bdev[drive] = inode->i_bdev;
+ opened_bdev[drive] = bdev;
res = -ENXIO;
INFBOUND(try, 16);
tmp = (char *)fd_dma_mem_alloc(1024 * try);
}
- if (!tmp && !floppy_track_buffer) {
+ if (!tmp && !floppy_track_buffer)
fallback_on_nodma_alloc(&tmp, 2048 * try);
- }
if (!tmp && !floppy_track_buffer) {
DPRINT("Unable to allocate DMA memory\n");
goto out;
}
}
- UDRS->fd_device = iminor(inode);
- set_capacity(disks[drive], floppy_sizes[iminor(inode)]);
- if (old_dev != -1 && old_dev != iminor(inode)) {
+ new_dev = MINOR(bdev->bd_dev);
+ UDRS->fd_device = new_dev;
+ set_capacity(disks[drive], floppy_sizes[new_dev]);
+ if (old_dev != -1 && old_dev != new_dev) {
if (buffer_drive == drive)
buffer_track = -1;
}
- /* Allow ioctls if we have write-permissions even if read-only open.
- * Needed so that programs such as fdrawcmd still can work on write
- * protected disks */
- if (filp->f_mode & 2
- || permission(filp->f_dentry->d_inode, 2, NULL) == 0)
- filp->private_data = (void *)8;
-
if (UFDCS->rawcmd == 1)
UFDCS->rawcmd = 2;
- if (!(filp->f_flags & O_NDELAY)) {
- if (filp->f_mode & 3) {
+ if (!(mode & FMODE_NDELAY)) {
+ if (mode & (FMODE_READ|FMODE_WRITE)) {
UDRS->last_checked = 0;
- check_disk_change(inode->i_bdev);
- if (UTESTF(FD_DISK_CHANGED))
+ check_disk_change(bdev);
+ if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags))
goto out;
}
res = -EROFS;
- if ((filp->f_mode & 2) && !(UTESTF(FD_DISK_WRITABLE)))
+ if ((mode & FMODE_WRITE) &&
+ !test_bit(FD_DISK_WRITABLE_BIT, &UDRS->flags))
goto out;
}
- up(&open_lock);
+ mutex_unlock(&open_lock);
return 0;
out:
if (UDRS->fd_ref < 0)
UDRS->fd_ref--;
if (!UDRS->fd_ref)
opened_bdev[drive] = NULL;
- floppy_release_irq_and_dma();
out2:
- up(&open_lock);
+ mutex_unlock(&open_lock);
return res;
}
{
int drive = (long)disk->private_data;
- if (UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY))
+ if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+ test_bit(FD_VERIFY_BIT, &UDRS->flags))
return 1;
- if (UDP->checkfreq < (int)(jiffies - UDRS->last_checked)) {
- if (floppy_grab_irq_and_dma()) {
- return 1;
- }
-
- lock_fdc(drive, 0);
- poll_drive(0, 0);
+ if (time_after(jiffies, UDRS->last_checked + UDP->checkfreq)) {
+ lock_fdc(drive, false);
+ poll_drive(false, 0);
process_fd_request();
- floppy_release_irq_and_dma();
}
- if (UTESTF(FD_DISK_CHANGED) ||
- UTESTF(FD_VERIFY) ||
+ if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+ test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
test_bit(drive, &fake_change) ||
(!ITYPE(UDRS->fd_device) && !current_type[drive]))
return 1;
* a disk in the drive, and whether that disk is writable.
*/
-static int floppy_rb0_complete(struct bio *bio, unsigned int bytes_done,
- int err)
+static void floppy_rb0_complete(struct bio *bio, int err)
{
- if (bio->bi_size)
- return 1;
-
complete((struct completion *)bio->bi_private);
- return 0;
}
static int __floppy_read_block_0(struct block_device *bdev)
int cf;
int res = 0;
- if (UTESTF(FD_DISK_CHANGED) ||
- UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
+ if (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+ test_bit(FD_VERIFY_BIT, &UDRS->flags) ||
+ test_bit(drive, &fake_change) || NO_GEOM) {
if (usage_count == 0) {
- printk("VFS: revalidate called on non-open device.\n");
+ pr_info("VFS: revalidate called on non-open device.\n");
return -EFAULT;
}
- lock_fdc(drive, 0);
- cf = UTESTF(FD_DISK_CHANGED) || UTESTF(FD_VERIFY);
+ lock_fdc(drive, false);
+ cf = (test_bit(FD_DISK_CHANGED_BIT, &UDRS->flags) ||
+ test_bit(FD_VERIFY_BIT, &UDRS->flags));
if (!(cf || test_bit(drive, &fake_change) || NO_GEOM)) {
process_fd_request(); /*already done by another thread */
return 0;
if (buffer_drive == drive)
buffer_track = -1;
clear_bit(drive, &fake_change);
- UCLEARF(FD_DISK_CHANGED);
+ clear_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
if (cf)
UDRS->generation++;
if (NO_GEOM) {
res = __floppy_read_block_0(opened_bdev[drive]);
} else {
if (cf)
- poll_drive(0, FD_RAW_NEED_DISK);
+ poll_drive(false, FD_RAW_NEED_DISK);
process_fd_request();
}
}
return res;
}
-static struct block_device_operations floppy_fops = {
- .owner = THIS_MODULE,
- .open = floppy_open,
- .release = floppy_release,
- .ioctl = fd_ioctl,
- .media_changed = check_floppy_change,
- .revalidate_disk = floppy_revalidate,
-};
-static char *table[] = {
- "", "d360", "h1200", "u360", "u720", "h360", "h720",
- "u1440", "u2880", "CompaQ", "h1440", "u1680", "h410",
- "u820", "h1476", "u1722", "h420", "u830", "h1494", "u1743",
- "h880", "u1040", "u1120", "h1600", "u1760", "u1920",
- "u3200", "u3520", "u3840", "u1840", "u800", "u1600",
- NULL
+static const struct block_device_operations floppy_fops = {
+ .owner = THIS_MODULE,
+ .open = floppy_open,
+ .release = floppy_release,
+ .locked_ioctl = fd_ioctl,
+ .getgeo = fd_getgeo,
+ .media_changed = check_floppy_change,
+ .revalidate_disk = floppy_revalidate,
};
-static int t360[] = { 1, 0 },
- t1200[] = { 2, 5, 6, 10, 12, 14, 16, 18, 20, 23, 0 },
- t3in[] = { 8, 9, 26, 27, 28, 7, 11, 15, 19, 24, 25, 29, 31, 3, 4, 13,
- 17, 21, 22, 30, 0 };
-static int *table_sup[] =
- { NULL, t360, t1200, t3in + 5 + 8, t3in + 5, t3in, t3in };
-
-static void __init register_devfs_entries(int drive)
-{
- int base_minor = (drive < 4) ? drive : (124 + drive);
-
- if (UDP->cmos < NUMBER(default_drive_params)) {
- int i = 0;
- do {
- int minor = base_minor + (table_sup[UDP->cmos][i] << 2);
-
- devfs_mk_bdev(MKDEV(FLOPPY_MAJOR, minor),
- S_IFBLK | S_IRUSR | S_IWUSR | S_IRGRP |
- S_IWGRP, "floppy/%d%s", drive,
- table[table_sup[UDP->cmos][i]]);
- } while (table_sup[UDP->cmos][i++]);
- }
-}
/*
* Floppy Driver initialization
output_byte(FD_DUMPREGS); /* 82072 and better know DUMPREGS */
if (FDCS->reset)
return FDC_NONE;
- if ((r = result()) <= 0x00)
+ r = result();
+ if (r <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+ pr_info("FDC %d is an 8272A\n", fdc);
return FDC_8272A; /* 8272a/765 don't know DUMPREGS */
}
if (r != 10) {
- printk
- ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (!fdc_configure()) {
- printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+ pr_info("FDC %d is an 82072\n", fdc);
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}
if (need_more_output() == MORE_OUTPUT) {
output_byte(0);
} else {
- printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+ pr_info("FDC %d is an 82072A\n", fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}
output_byte(FD_UNLOCK);
r = result();
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
- return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
+ pr_info("FDC %d is a pre-1991 82077\n", fdc);
+ return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
* LOCK/UNLOCK */
}
if ((r != 1) || (reply_buffer[0] != 0x00)) {
- printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
output_byte(FD_PARTID);
r = result();
if (r != 1) {
- printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (reply_buffer[0] == 0x80) {
- printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+ pr_info("FDC %d is a post-1991 82077\n", fdc);
return FDC_82077; /* Revised 82077AA passes all the tests */
}
switch (reply_buffer[0] >> 5) {
case 0x0:
/* Either a 82078-1 or a 82078SL running at 5Volt */
- printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+ pr_info("FDC %d is an 82078.\n", fdc);
return FDC_82078;
case 0x1:
- printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+ pr_info("FDC %d is a 44pin 82078\n", fdc);
return FDC_82078;
case 0x2:
- printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+ pr_info("FDC %d is a S82078B\n", fdc);
return FDC_S82078B;
case 0x3:
- printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
- fdc);
+ pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
return FDC_87306;
default:
- printk(KERN_INFO
- "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
- fdc, reply_buffer[0] >> 5);
+ pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+ fdc, reply_buffer[0] >> 5);
return FDC_82078_UNKN;
}
} /* get_fdc_version */
else
param = config_params[i].def_param;
if (config_params[i].fn)
- config_params[i].
- fn(ints, param,
- config_params[i].param2);
+ config_params[i].fn(ints, param,
+ config_params[i].
+ param2);
if (config_params[i].var) {
DPRINT("%s=%d\n", str, param);
*config_params[i].var = param;
DPRINT("allowed options are:");
for (i = 0; i < ARRAY_SIZE(config_params); i++)
- printk(" %s", config_params[i].name);
- printk("\n");
+ pr_cont(" %s", config_params[i].name);
+ pr_cont("\n");
} else
DPRINT("botched floppy option\n");
- DPRINT("Read Documentation/floppy.txt\n");
+ DPRINT("Read Documentation/blockdev/floppy.txt\n");
return 0;
}
static int have_no_fdc = -ENODEV;
+static ssize_t floppy_cmos_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct platform_device *p = to_platform_device(dev);
+ int drive;
+
+ drive = p->id;
+ return sprintf(buf, "%X\n", UDP->cmos);
+}
+
+DEVICE_ATTR(cmos, S_IRUGO, floppy_cmos_show, NULL);
+
static void floppy_device_release(struct device *dev)
{
- complete(&device_release);
}
-static struct platform_device floppy_device = {
- .name = "floppy",
- .id = 0,
- .dev = {
- .release = floppy_device_release,
- }
+static int floppy_resume(struct device *dev)
+{
+ int fdc;
+
+ for (fdc = 0; fdc < N_FDC; fdc++)
+ if (FDCS->address != -1)
+ user_reset_fdc(-1, FD_RESET_ALWAYS, false);
+
+ return 0;
+}
+
+static const struct dev_pm_ops floppy_pm_ops = {
+ .resume = floppy_resume,
+ .restore = floppy_resume,
+};
+
+static struct platform_driver floppy_driver = {
+ .driver = {
+ .name = "floppy",
+ .pm = &floppy_pm_ops,
+ },
};
+static struct platform_device floppy_device[N_DRIVE];
+
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = (*part & 3) | ((*part & 0x80) >> 5);
!(allowed_drive_mask & (1 << drive)) ||
fdc_state[FDC(drive)].version == FDC_NONE)
return NULL;
- if (((*part >> 2) & 0x1f) >= NUMBER(floppy_type))
+ if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type))
return NULL;
*part = 0;
return get_disk(disks[drive]);
int i, unit, drive;
int err, dr;
+#if defined(CONFIG_PPC)
+ if (check_legacy_ioport(FDC1))
+ return -ENODEV;
+#endif
+
raw_cmd = NULL;
for (dr = 0; dr < N_DRIVE; dr++) {
motor_off_timer[dr].function = motor_off_callback;
}
- devfs_mk_dir("floppy");
-
err = register_blkdev(FLOPPY_MAJOR, "fd");
if (err)
- goto out_devfs_remove;
+ goto out_put_disk;
+
+ err = platform_driver_register(&floppy_driver);
+ if (err)
+ goto out_unreg_blkdev;
floppy_queue = blk_init_queue(do_fd_request, &floppy_lock);
if (!floppy_queue) {
err = -ENOMEM;
- goto out_unreg_blkdev;
+ goto out_unreg_driver;
}
- blk_queue_max_sectors(floppy_queue, 64);
+ blk_queue_max_hw_sectors(floppy_queue, 64);
blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE,
floppy_find, NULL, NULL);
for (i = 0; i < N_FDC; i++) {
fdc = i;
- CLEARSTRUCT(FDCS);
+ memset(FDCS, 0, sizeof(*FDCS));
FDCS->dtr = -1;
FDCS->dor = 0x4;
#if defined(__sparc__) || defined(__mc68000__)
- /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
+ /*sparcs/sun3x don't have a DOR reset which we can fall back on to */
#ifdef __mc68000__
if (MACH_IS_SUN3X)
#endif
}
use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC64)
- if (check_legacy_ioport(FDC1)) {
- del_timer(&fd_timeout);
- err = -ENODEV;
- goto out_unreg_region;
- }
-#endif
fdc_state[0].address = FDC1;
if (fdc_state[0].address == -1) {
del_timer(&fd_timeout);
/* initialise drive state */
for (drive = 0; drive < N_DRIVE; drive++) {
- CLEARSTRUCT(UDRS);
- CLEARSTRUCT(UDRWE);
- USETF(FD_DISK_NEWCHANGE);
- USETF(FD_DISK_CHANGED);
- USETF(FD_VERIFY);
+ memset(UDRS, 0, sizeof(*UDRS));
+ memset(UDRWE, 0, sizeof(*UDRWE));
+ set_bit(FD_DISK_NEWCHANGE_BIT, &UDRS->flags);
+ set_bit(FD_DISK_CHANGED_BIT, &UDRS->flags);
+ set_bit(FD_VERIFY_BIT, &UDRS->flags);
UDRS->fd_device = -1;
floppy_track_buffer = NULL;
max_buffer_sectors = 0;
if (FDCS->address == -1)
continue;
FDCS->rawcmd = 2;
- if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
+ if (user_reset_fdc(-1, FD_RESET_ALWAYS, false)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
* properly, so force a reset for the standard FDC clones,
* to avoid interrupt garbage.
*/
- user_reset_fdc(-1, FD_RESET_ALWAYS, 0);
+ user_reset_fdc(-1, FD_RESET_ALWAYS, false);
}
fdc = 0;
del_timer(&fd_timeout);
current_drive = 0;
- floppy_release_irq_and_dma();
- initialising = 0;
+ initialized = true;
if (have_no_fdc) {
DPRINT("no floppy controllers found\n");
err = have_no_fdc;
goto out_flush_work;
}
- err = platform_device_register(&floppy_device);
- if (err)
- goto out_flush_work;
-
for (drive = 0; drive < N_DRIVE; drive++) {
if (!(allowed_drive_mask & (1 << drive)))
continue;
if (fdc_state[FDC(drive)].version == FDC_NONE)
continue;
+
+ floppy_device[drive].name = floppy_device_name;
+ floppy_device[drive].id = drive;
+ floppy_device[drive].dev.release = floppy_device_release;
+
+ err = platform_device_register(&floppy_device[drive]);
+ if (err)
+ goto out_flush_work;
+
+ err = device_create_file(&floppy_device[drive].dev,
+ &dev_attr_cmos);
+ if (err)
+ goto out_unreg_platform_dev;
+
/* to be cleaned up... */
disks[drive]->private_data = (void *)(long)drive;
disks[drive]->queue = floppy_queue;
disks[drive]->flags |= GENHD_FL_REMOVABLE;
- disks[drive]->driverfs_dev = &floppy_device.dev;
+ disks[drive]->driverfs_dev = &floppy_device[drive].dev;
add_disk(disks[drive]);
}
return 0;
+out_unreg_platform_dev:
+ platform_device_unregister(&floppy_device[drive]);
out_flush_work:
flush_scheduled_work();
if (usage_count)
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
blk_cleanup_queue(floppy_queue);
+out_unreg_driver:
+ platform_driver_unregister(&floppy_driver);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
-out_devfs_remove:
- devfs_remove("floppy");
out_put_disk:
while (dr--) {
del_timer(&motor_off_timer[dr]);
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset,
+ p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n",
+ FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
return 0;
}
spin_unlock_irqrestore(&floppy_usage_lock, flags);
+
+ /*
+ * We might have scheduled a free_irq(), wait it to
+ * drain first:
+ */
+ flush_scheduled_work();
+
if (fd_request_irq()) {
DPRINT("Unable to grab IRQ%d for the floppy driver\n",
FLOPPY_IRQ);
if (fd_request_dma()) {
DPRINT("Unable to grab DMA%d for the floppy driver\n",
FLOPPY_DMA);
- fd_free_irq();
- spin_lock_irqsave(&floppy_usage_lock, flags);
- usage_count--;
- spin_unlock_irqrestore(&floppy_usage_lock, flags);
- return -1;
+ if (can_use_virtual_dma & 2)
+ use_virtual_dma = can_use_virtual_dma = 1;
+ if (!(can_use_virtual_dma & 1)) {
+ fd_free_irq();
+ spin_lock_irqsave(&floppy_usage_lock, flags);
+ usage_count--;
+ spin_unlock_irqrestore(&floppy_usage_lock, flags);
+ return -1;
+ }
}
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1)
fd_outb(FDCS->dor, FD_DOR);
/*
- * The driver will try and free resources and relies on us
- * to know if they were allocated or not.
+ * The driver will try and free resources and relies on us
+ * to know if they were allocated or not.
*/
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
#ifndef __sparc__
for (drive = 0; drive < N_FDC * 4; drive++)
if (timer_pending(motor_off_timer + drive))
- printk("motor off timer %d still active\n", drive);
+ pr_info("motor off timer %d still active\n", drive);
#endif
if (timer_pending(&fd_timeout))
- printk("floppy timer still active:%s\n", timeout_message);
+ pr_info("floppy timer still active:%s\n", timeout_message);
if (timer_pending(&fd_timer))
- printk("auxiliary floppy timer still active\n");
- if (floppy_work.pending)
- printk("work still pending\n");
+ pr_info("auxiliary floppy timer still active\n");
+ if (work_pending(&floppy_work))
+ pr_info("work still pending\n");
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
static char *floppy;
-static void unregister_devfs_entries(int drive)
-{
- int i;
-
- if (UDP->cmos < NUMBER(default_drive_params)) {
- i = 0;
- do {
- devfs_remove("floppy/%d%s", drive,
- table[table_sup[UDP->cmos][i]]);
- } while (table_sup[UDP->cmos][i++]);
- }
-}
-
static void __init parse_floppy_cfg_string(char *cfg)
{
char *ptr;
while (*cfg) {
- for (ptr = cfg; *cfg && *cfg != ' ' && *cfg != '\t'; cfg++) ;
+ ptr = cfg;
+ while (*cfg && *cfg != ' ' && *cfg != '\t')
+ cfg++;
if (*cfg) {
*cfg = '\0';
cfg++;
}
}
-int init_module(void)
+static int __init floppy_module_init(void)
{
if (floppy)
parse_floppy_cfg_string(floppy);
return floppy_init();
}
+module_init(floppy_module_init);
-void cleanup_module(void)
+static void __exit floppy_module_exit(void)
{
int drive;
- init_completion(&device_release);
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
unregister_blkdev(FLOPPY_MAJOR, "fd");
+ platform_driver_unregister(&floppy_driver);
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
if ((allowed_drive_mask & (1 << drive)) &&
fdc_state[FDC(drive)].version != FDC_NONE) {
del_gendisk(disks[drive]);
- unregister_devfs_entries(drive);
+ device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ platform_device_unregister(&floppy_device[drive]);
}
put_disk(disks[drive]);
}
- platform_device_unregister(&floppy_device);
- devfs_remove("floppy");
del_timer_sync(&fd_timeout);
del_timer_sync(&fd_timer);
/* eject disk, if any */
fd_eject(0);
-
- wait_for_completion(&device_release);
}
+module_exit(floppy_module_exit);
+
module_param(floppy, charp, 0);
module_param(FLOPPY_IRQ, int, 0);
module_param(FLOPPY_DMA, int, 0);
MODULE_SUPPORTED_DEVICE("fd");
MODULE_LICENSE("GPL");
+/* This doesn't actually get used other than for module information */
+static const struct pnp_device_id floppy_pnpids[] = {
+ {"PNP0700", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(pnp, floppy_pnpids);
+
#else
__setup("floppy=", floppy_setup);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff