/*
- * Disk Array driver for HP SA 5xxx and 6xxx Controllers
- * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
+ * Disk Array driver for HP Smart Array controllers.
+ * (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more details.
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA.
*
* Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <linux/compat.h>
-#include <linux/blktrace_api.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/blkdev.h>
#include <linux/genhd.h>
#include <linux/completion.h>
+#include <scsi/scsi.h>
+#include <scsi/sg.h>
+#include <scsi/scsi_ioctl.h>
+#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
+#include <linux/kthread.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
-MODULE_VERSION("3.6.14");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0x324A103C, "Smart Array P712m", &SA5_access},
+ {0x324B103C, "Smart Array P711m", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 1024
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
static ctlr_info_t *hba[MAX_CTLR];
-static void do_cciss_request(request_queue_t *q);
+static void do_cciss_request(struct request_queue *q);
static irqreturn_t do_cciss_intr(int irq, void *dev_id);
-static int cciss_open(struct inode *inode, struct file *filep);
-static int cciss_release(struct inode *inode, struct file *filep);
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_open(struct block_device *bdev, fmode_t mode);
+static int cciss_release(struct gendisk *disk, fmode_t mode);
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all);
static void cciss_read_capacity(int ctlr, int logvol, int withirq,
int withirq, sector_t total_size,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
-static void cciss_getgeometry(int cntl_num);
static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
__u32);
static void start_io(ctlr_info_t *h);
static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
- unsigned int use_unit_num, unsigned int log_unit,
__u8 page_code, unsigned char *scsi3addr, int cmd_type);
static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
- unsigned int use_unit_num, unsigned int log_unit,
- __u8 page_code, int cmd_type);
+ __u8 page_code, unsigned char scsi3addr[],
+ int cmd_type);
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+ int attempt_retry);
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
static void fail_all_cmds(unsigned long ctlr);
+static int scan_thread(void *data);
+static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
#ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data);
static void cciss_procinit(int i);
#else
static void cciss_procinit(int i)
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_COMPAT
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
+static int cciss_compat_ioctl(struct block_device *, fmode_t,
+ unsigned, unsigned long);
#endif
static struct block_device_operations cciss_fops = {
.owner = THIS_MODULE,
.open = cciss_open,
.release = cciss_release,
- .ioctl = cciss_ioctl,
+ .locked_ioctl = cciss_ioctl,
.getgeo = cciss_getgeo,
#ifdef CONFIG_COMPAT
.compat_ioctl = cciss_compat_ioctl,
/*
* Enqueuing and dequeuing functions for cmdlists.
*/
-static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
+static inline void addQ(struct hlist_head *list, CommandList_struct *c)
{
- if (*Qptr == NULL) {
- *Qptr = c;
- c->next = c->prev = c;
- } else {
- c->prev = (*Qptr)->prev;
- c->next = (*Qptr);
- (*Qptr)->prev->next = c;
- (*Qptr)->prev = c;
- }
+ hlist_add_head(&c->list, list);
}
-static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
- CommandList_struct *c)
+static inline void removeQ(CommandList_struct *c)
{
- if (c && c->next != c) {
- if (*Qptr == c)
- *Qptr = c->next;
- c->prev->next = c->next;
- c->next->prev = c->prev;
- } else {
- *Qptr = NULL;
- }
- return c;
+ if (WARN_ON(hlist_unhashed(&c->list)))
+ return;
+
+ hlist_del_init(&c->list);
}
#include "cciss_scsi.c" /* For SCSI tape support */
+#define RAID_UNKNOWN 6
+
#ifdef CONFIG_PROC_FS
/*
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
-#define RAID_UNKNOWN 6
+#define ENGAGE_SCSI "engage scsi"
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
static struct proc_dir_entry *proc_cciss;
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t *) data;
- drive_info_struct *drv;
- unsigned long flags;
- sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+
+ seq_printf(seq, "%s: HP %s Controller\n"
+ "Board ID: 0x%08lx\n"
+ "Firmware Version: %c%c%c%c\n"
+ "IRQ: %d\n"
+ "Logical drives: %d\n"
+ "Current Q depth: %d\n"
+ "Current # commands on controller: %d\n"
+ "Max Q depth since init: %d\n"
+ "Max # commands on controller since init: %d\n"
+ "Max SG entries since init: %d\n",
+ h->devname,
+ h->product_name,
+ (unsigned long)h->board_id,
+ h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+ h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->num_luns,
+ h->Qdepth, h->commands_outstanding,
+ h->maxQsinceinit, h->max_outstanding, h->maxSG);
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
- ctlr = h->ctlr;
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- size = sprintf(buffer, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Max sectors: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns,
- h->cciss_max_sectors,
- h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
- pos += size;
- len += size;
- cciss_proc_tape_report(ctlr, buffer, &pos, &len);
- for (i = 0; i <= h->highest_lun; i++) {
+ if (*pos == 0)
+ cciss_seq_show_header(seq);
- drv = &h->drv[i];
- if (drv->heads == 0)
- continue;
+ return pos;
+}
+
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+ sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ loff_t *pos = v;
+ drive_info_struct *drv = &h->drv[*pos];
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+ if (*pos > h->highest_lun)
+ return 0;
+
+ if (drv->heads == 0)
+ return 0;
+
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+ vol_sz_frac *= 100;
+ sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+ if (drv->raid_level > 5)
+ drv->raid_level = RAID_UNKNOWN;
+ seq_printf(seq, "cciss/c%dd%d:"
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+ raid_label[drv->raid_level]);
+ return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+
+ if (*pos > h->highest_lun)
+ return NULL;
+ *pos += 1;
+
+ return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+ ctlr_info_t *h = seq->private;
+
+ /* Only reset h->busy_configuring if we succeeded in setting
+ * it during cciss_seq_start. */
+ if (v == ERR_PTR(-EBUSY))
+ return;
- if (drv->raid_level > 5)
- drv->raid_level = RAID_UNKNOWN;
- size = sprintf(buffer + len, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, i, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- pos += size;
- len += size;
- }
-
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
h->busy_configuring = 0;
- return len;
}
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+ .start = cciss_seq_start,
+ .show = cciss_seq_show,
+ .next = cciss_seq_next,
+ .stop = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
{
- unsigned char cmd[80];
- int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
- ctlr_info_t *h = (ctlr_info_t *) data;
- int rc;
+ int ret = seq_open(file, &cciss_seq_ops);
+ struct seq_file *seq = file->private_data;
+
+ if (!ret)
+ seq->private = PDE(inode)->data;
+
+ return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+ size_t length, loff_t *ppos)
+{
+ int err;
+ char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+ return -EINVAL;
#endif
- if (count > sizeof(cmd) - 1)
+ if (!buf || length > PAGE_SIZE - 1)
return -EINVAL;
- if (copy_from_user(cmd, buffer, count))
- return -EFAULT;
- cmd[count] = '\0';
- len = strlen(cmd); // above 3 lines ensure safety
- if (len && cmd[len - 1] == '\n')
- cmd[--len] = '\0';
-# ifdef CONFIG_CISS_SCSI_TAPE
- if (strcmp("engage scsi", cmd) == 0) {
+
+ buffer = (char *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ err = -EFAULT;
+ if (copy_from_user(buffer, buf, length))
+ goto out;
+ buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+ struct seq_file *seq = file->private_data;
+ ctlr_info_t *h = seq->private;
+ int rc;
+
rc = cciss_engage_scsi(h->ctlr);
if (rc != 0)
- return -rc;
- return count;
- }
+ err = -rc;
+ else
+ err = length;
+ } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+ err = -EINVAL;
/* might be nice to have "disengage" too, but it's not
safely possible. (only 1 module use count, lock issues.) */
-# endif
- return -EINVAL;
+
+out:
+ free_page((unsigned long)buffer);
+ return err;
}
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = cciss_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = cciss_proc_write,
+};
+
static void __devinit cciss_procinit(int i)
{
struct proc_dir_entry *pde;
- if (proc_cciss == NULL) {
- proc_cciss = proc_mkdir("cciss", proc_root_driver);
- if (!proc_cciss)
- return;
- }
-
- pde = create_proc_read_entry(hba[i]->devname,
- S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
- proc_cciss, cciss_proc_get_info, hba[i]);
- pde->write_proc = cciss_proc_write;
+ if (proc_cciss == NULL)
+ proc_cciss = proc_mkdir("driver/cciss", NULL);
+ if (!proc_cciss)
+ return;
+ pde = proc_create_data(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ S_IROTH, proc_cciss,
+ &cciss_proc_fops, hba[i]);
}
#endif /* CONFIG_PROC_FS */
+#define MAX_PRODUCT_NAME_LEN 19
+
+#define to_hba(n) container_of(n, struct ctlr_info, dev)
+#define to_drv(n) container_of(n, drive_info_struct, dev)
+
+static struct device_type cciss_host_type = {
+ .name = "cciss_host",
+};
+
+static ssize_t dev_show_unique_id(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ __u8 sn[16];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(sn, drv->serial_no, sizeof(sn));
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, 16 * 2 + 2,
+ "%02X%02X%02X%02X%02X%02X%02X%02X"
+ "%02X%02X%02X%02X%02X%02X%02X%02X\n",
+ sn[0], sn[1], sn[2], sn[3],
+ sn[4], sn[5], sn[6], sn[7],
+ sn[8], sn[9], sn[10], sn[11],
+ sn[12], sn[13], sn[14], sn[15]);
+}
+DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
+
+static ssize_t dev_show_vendor(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char vendor[VENDOR_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
+}
+DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
+
+static ssize_t dev_show_model(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char model[MODEL_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(model, drv->model, MODEL_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
+}
+DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
+
+static ssize_t dev_show_rev(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ char rev[REV_LEN + 1];
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring)
+ ret = -EBUSY;
+ else
+ memcpy(rev, drv->rev, REV_LEN + 1);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ if (ret)
+ return ret;
+ else
+ return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
+}
+DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+
+static struct attribute *cciss_dev_attrs[] = {
+ &dev_attr_unique_id.attr,
+ &dev_attr_model.attr,
+ &dev_attr_vendor.attr,
+ &dev_attr_rev.attr,
+ NULL
+};
+
+static struct attribute_group cciss_dev_attr_group = {
+ .attrs = cciss_dev_attrs,
+};
+
+static struct attribute_group *cciss_dev_attr_groups[] = {
+ &cciss_dev_attr_group,
+ NULL
+};
+
+static struct device_type cciss_dev_type = {
+ .name = "cciss_device",
+ .groups = cciss_dev_attr_groups,
+};
+
+static struct bus_type cciss_bus_type = {
+ .name = "cciss",
+};
+
+
+/*
+ * Initialize sysfs entry for each controller. This sets up and registers
+ * the 'cciss#' directory for each individual controller under
+ * /sys/bus/pci/devices/<dev>/.
+ */
+static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
+{
+ device_initialize(&h->dev);
+ h->dev.type = &cciss_host_type;
+ h->dev.bus = &cciss_bus_type;
+ dev_set_name(&h->dev, "%s", h->devname);
+ h->dev.parent = &h->pdev->dev;
+
+ return device_add(&h->dev);
+}
+
+/*
+ * Remove sysfs entries for an hba.
+ */
+static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
+{
+ device_del(&h->dev);
+}
+
+/*
+ * Initialize sysfs for each logical drive. This sets up and registers
+ * the 'c#d#' directory for each individual logical drive under
+ * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
+ * /sys/block/cciss!c#d# to this entry.
+ */
+static int cciss_create_ld_sysfs_entry(struct ctlr_info *h,
+ drive_info_struct *drv,
+ int drv_index)
+{
+ device_initialize(&drv->dev);
+ drv->dev.type = &cciss_dev_type;
+ drv->dev.bus = &cciss_bus_type;
+ dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index);
+ drv->dev.parent = &h->dev;
+ return device_add(&drv->dev);
+}
+
+/*
+ * Remove sysfs entries for a logical drive.
+ */
+static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv)
+{
+ device_del(&drv->dev);
+}
+
/*
* For operations that cannot sleep, a command block is allocated at init,
* and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
c->cmdindex = i;
}
+ INIT_HLIST_NODE(&c->list);
c->busaddr = (__u32) cmd_dma_handle;
temp64.val = (__u64) err_dma_handle;
c->ErrDesc.Addr.lower = temp64.val32.lower;
/*
* Open. Make sure the device is really there.
*/
-static int cciss_open(struct inode *inode, struct file *filep)
+static int cciss_open(struct block_device *bdev, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(bdev->bd_disk);
+ drive_info_struct *drv = get_drv(bdev->bd_disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
if (host->busy_initializing || drv->busy_configuring)
* for "raw controller".
*/
if (drv->heads == 0) {
- if (iminor(inode) != 0) { /* not node 0? */
+ if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */
/* if not node 0 make sure it is a partition = 0 */
- if (iminor(inode) & 0x0f) {
+ if (MINOR(bdev->bd_dev) & 0x0f) {
return -ENXIO;
/* if it is, make sure we have a LUN ID */
} else if (drv->LunID == 0) {
/*
* Close. Sync first.
*/
-static int cciss_release(struct inode *inode, struct file *filep)
+static int cciss_release(struct gendisk *disk, fmode_t mode)
{
- ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
- drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
+ ctlr_info_t *host = get_host(disk);
+ drive_info_struct *drv = get_drv(disk);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss_release %s\n",
- inode->i_bdev->bd_disk->disk_name);
+ printk(KERN_DEBUG "cciss_release %s\n", disk->disk_name);
#endif /* CCISS_DEBUG */
drv->usage_count--;
#ifdef CONFIG_COMPAT
-static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int do_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
int ret;
lock_kernel();
- ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
+ ret = cciss_ioctl(bdev, mode, cmd, arg);
unlock_kernel();
return ret;
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
-static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
- unsigned long arg);
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg);
-static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
+static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
switch (cmd) {
case CCISS_GETPCIINFO:
case CCISS_REGNEWD:
case CCISS_RESCANDISK:
case CCISS_GETLUNINFO:
- return do_ioctl(f, cmd, arg);
+ return do_ioctl(bdev, mode, cmd, arg);
case CCISS_PASSTHRU32:
- return cciss_ioctl32_passthru(f, cmd, arg);
+ return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
case CCISS_BIG_PASSTHRU32:
- return cciss_ioctl32_big_passthru(f, cmd, arg);
+ return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
default:
return -ENOIOCTLCMD;
}
}
-static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
IOCTL32_Command_struct __user *arg32 =
(IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
return err;
}
-static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
- unsigned long arg)
+static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
+ unsigned cmd, unsigned long arg)
{
BIG_IOCTL32_Command_struct __user *arg32 =
(BIG_IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
+ err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
if (err)
return err;
err |=
return 0;
}
+static void check_ioctl_unit_attention(ctlr_info_t *host, CommandList_struct *c)
+{
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
+ c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
+ (void)check_for_unit_attention(host, c);
+}
/*
* ioctl
*/
-static int cciss_ioctl(struct inode *inode, struct file *filep,
+static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
struct gendisk *disk = bdev->bd_disk;
ctlr_info_t *host = get_host(disk);
drive_info_struct *drv = get_drv(disk);
return 0;
}
+ case CCISS_DEREGDISK:
+ case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, NULL);
+ return rebuild_lun_table(host, 0);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
return -EFAULT;
return 0;
}
- case CCISS_DEREGDISK:
- return rebuild_lun_table(host, disk);
-
- case CCISS_REGNEWD:
- return rebuild_lun_table(host, NULL);
-
case CCISS_PASSTHRU:
{
IOCTL_Command_struct iocommand;
iocommand.buf_size,
PCI_DMA_BIDIRECTIONAL);
+ check_ioctl_unit_attention(host, c);
+
/* Copy the error information out */
iocommand.error_info = *(c->err_info);
if (copy_to_user
if (ioc->Request.Type.Direction == XFER_WRITE) {
if (copy_from_user
(buff[sg_used], data_ptr, sz)) {
- status = -ENOMEM;
+ status = -EFAULT;
goto cleanup1;
}
} else {
(dma_addr_t) temp64.val, buff_size[i],
PCI_DMA_BIDIRECTIONAL);
}
+ check_ioctl_unit_attention(host, c);
/* Copy the error information out */
ioc->error_info = *(c->err_info);
if (copy_to_user(argp, ioc, sizeof(*ioc))) {
kfree(ioc);
return status;
}
+
+ /* scsi_cmd_ioctl handles these, below, though some are not */
+ /* very meaningful for cciss. SG_IO is the main one people want. */
+
+ case SG_GET_VERSION_NUM:
+ case SG_SET_TIMEOUT:
+ case SG_GET_TIMEOUT:
+ case SG_GET_RESERVED_SIZE:
+ case SG_SET_RESERVED_SIZE:
+ case SG_EMULATED_HOST:
+ case SG_IO:
+ case SCSI_IOCTL_SEND_COMMAND:
+ return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
+
+ /* scsi_cmd_ioctl would normally handle these, below, but */
+ /* they aren't a good fit for cciss, as CD-ROMs are */
+ /* not supported, and we don't have any bus/target/lun */
+ /* which we present to the kernel. */
+
+ case CDROM_SEND_PACKET:
+ case CDROMCLOSETRAY:
+ case CDROMEJECT:
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
default:
return -ENOTTY;
}
}
-static inline void complete_buffers(struct bio *bio, int status)
-{
- while (bio) {
- struct bio *xbh = bio->bi_next;
- int nr_sectors = bio_sectors(bio);
-
- bio->bi_next = NULL;
- bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
- bio = xbh;
- }
-}
-
static void cciss_check_queues(ctlr_info_t *h)
{
int start_queue = h->next_to_run;
h->next_to_run = curr_queue;
break;
}
- } else {
- curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
}
}
}
pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
}
- complete_buffers(rq->bio, rq->errors);
-
- if (blk_fs_request(rq)) {
- const int rw = rq_data_dir(rq);
-
- disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
- }
-
#ifdef CCISS_DEBUG
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
- add_disk_randomness(rq->rq_disk);
+ /* set the residual count for pc requests */
+ if (blk_pc_request(rq))
+ rq->resid_len = cmd->err_info->ResidualCnt;
+
+ blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
+
spin_lock_irqsave(&h->lock, flags);
- end_that_request_last(rq, rq->errors);
cmd_free(h, cmd, 1);
cciss_check_queues(h);
spin_unlock_irqrestore(&h->lock, flags);
}
+static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[],
+ uint32_t log_unit)
+{
+ log_unit = h->drv[log_unit].LunID & 0x03fff;
+ memset(&scsi3addr[4], 0, 4);
+ memcpy(&scsi3addr[0], &log_unit, 4);
+ scsi3addr[3] |= 0x40;
+}
+
+/* This function gets the SCSI vendor, model, and revision of a logical drive
+ * via the inquiry page 0. Model, vendor, and rev are set to empty strings if
+ * they cannot be read.
+ */
+static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
+ char *vendor, char *model, char *rev)
+{
+ int rc;
+ InquiryData_struct *inq_buf;
+ unsigned char scsi3addr[8];
+
+ *vendor = '\0';
+ *model = '\0';
+ *rev = '\0';
+
+ inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (!inq_buf)
+ return;
+
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
+ if (withirq)
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf,
+ sizeof(InquiryData_struct), 0,
+ scsi3addr, TYPE_CMD);
+ else
+ rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf,
+ sizeof(InquiryData_struct), 0,
+ scsi3addr, TYPE_CMD);
+ if (rc == IO_OK) {
+ memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
+ vendor[VENDOR_LEN] = '\0';
+ memcpy(model, &inq_buf->data_byte[16], MODEL_LEN);
+ model[MODEL_LEN] = '\0';
+ memcpy(rev, &inq_buf->data_byte[32], REV_LEN);
+ rev[REV_LEN] = '\0';
+ }
+
+ kfree(inq_buf);
+ return;
+}
+
+/* This function gets the serial number of a logical drive via
+ * inquiry page 0x83. Serial no. is 16 bytes. If the serial
+ * number cannot be had, for whatever reason, 16 bytes of 0xff
+ * are returned instead.
+ */
+static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+ unsigned char *serial_no, int buflen)
+{
+#define PAGE_83_INQ_BYTES 64
+ int rc;
+ unsigned char *buf;
+ unsigned char scsi3addr[8];
+
+ if (buflen > 16)
+ buflen = 16;
+ memset(serial_no, 0xff, buflen);
+ buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
+ if (!buf)
+ return;
+ memset(serial_no, 0, buflen);
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
+ if (withirq)
+ rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+ PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
+ else
+ rc = sendcmd(CISS_INQUIRY, ctlr, buf,
+ PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
+ if (rc == IO_OK)
+ memcpy(serial_no, &buf[8], buflen);
+ kfree(buf);
+ return;
+}
+
+static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+ int drv_index)
+{
+ disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
+ disk->major = h->major;
+ disk->first_minor = drv_index << NWD_SHIFT;
+ disk->fops = &cciss_fops;
+ disk->private_data = &h->drv[drv_index];
+ disk->driverfs_dev = &h->drv[drv_index].dev;
+
+ /* Set up queue information */
+ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
+
+ /* This is a hardware imposed limit. */
+ blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+
+ /* This is a limit in the driver and could be eliminated. */
+ blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+
+ blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
+
+ blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
+ disk->queue->queuedata = h;
+
+ blk_queue_logical_block_size(disk->queue,
+ h->drv[drv_index].block_size);
+
+ /* Make sure all queue data is written out before */
+ /* setting h->drv[drv_index].queue, as setting this */
+ /* allows the interrupt handler to start the queue */
+ wmb();
+ h->drv[drv_index].queue = disk->queue;
+ add_disk(disk);
+}
+
/* This function will check the usage_count of the drive to be updated/added.
- * If the usage_count is zero then the drive information will be updated and
- * the disk will be re-registered with the kernel. If not then it will be
- * left alone for the next reboot. The exception to this is disk 0 which
- * will always be left registered with the kernel since it is also the
- * controller node. Any changes to disk 0 will show up on the next
- * reboot.
+ * If the usage_count is zero and it is a heretofore unknown drive, or,
+ * the drive's capacity, geometry, or serial number has changed,
+ * then the drive information will be updated and the disk will be
+ * re-registered with the kernel. If these conditions don't hold,
+ * then it will be left alone for the next reboot. The exception to this
+ * is disk 0 which will always be left registered with the kernel since it
+ * is also the controller node. Any changes to disk 0 will show up on
+ * the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
{
ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
sector_t total_size;
unsigned long flags = 0;
int ret = 0;
+ drive_info_struct *drvinfo;
+ int was_only_controller_node;
+
+ /* Get information about the disk and modify the driver structure */
+ inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+ if (inq_buff == NULL || drvinfo == NULL)
+ goto mem_msg;
+
+ /* See if we're trying to update the "controller node"
+ * this will happen the when the first logical drive gets
+ * created by ACU.
+ */
+ was_only_controller_node = (drv_index == 0 &&
+ h->drv[0].raid_level == -1);
+
+ /* testing to see if 16-byte CDBs are already being used */
+ if (h->cciss_read == CCISS_READ_16) {
+ cciss_read_capacity_16(h->ctlr, drv_index, 1,
+ &total_size, &block_size);
+
+ } else {
+ cciss_read_capacity(ctlr, drv_index, 1,
+ &total_size, &block_size);
+
+ /* if read_capacity returns all F's this volume is >2TB */
+ /* in size so we switch to 16-byte CDB's for all */
+ /* read/write ops */
+ if (total_size == 0xFFFFFFFFULL) {
+ cciss_read_capacity_16(ctlr, drv_index, 1,
+ &total_size, &block_size);
+ h->cciss_read = CCISS_READ_16;
+ h->cciss_write = CCISS_WRITE_16;
+ } else {
+ h->cciss_read = CCISS_READ_10;
+ h->cciss_write = CCISS_WRITE_10;
+ }
+ }
+
+ cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+ inq_buff, drvinfo);
+ drvinfo->block_size = block_size;
+ drvinfo->nr_blocks = total_size + 1;
+
+ cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor,
+ drvinfo->model, drvinfo->rev);
+ cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+ sizeof(drvinfo->serial_no));
+
+ /* Is it the same disk we already know, and nothing's changed? */
+ if (h->drv[drv_index].raid_level != -1 &&
+ ((memcmp(drvinfo->serial_no,
+ h->drv[drv_index].serial_no, 16) == 0) &&
+ drvinfo->block_size == h->drv[drv_index].block_size &&
+ drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
+ drvinfo->heads == h->drv[drv_index].heads &&
+ drvinfo->sectors == h->drv[drv_index].sectors &&
+ drvinfo->cylinders == h->drv[drv_index].cylinders))
+ /* The disk is unchanged, nothing to update */
+ goto freeret;
- /* if the disk already exists then deregister it before proceeding */
- if (h->drv[drv_index].raid_level != -1) {
+ /* If we get here it's not the same disk, or something's changed,
+ * so we need to * deregister it, and re-register it, if it's not
+ * in use.
+ * If the disk already exists then deregister it before proceeding
+ * (unless it's the first disk (for the controller node).
+ */
+ if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+ printk(KERN_WARNING "disk %d has changed.\n", drv_index);
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
h->drv[drv_index].busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- ret = deregister_disk(h->gendisk[drv_index],
- &h->drv[drv_index], 0);
+
+ /* deregister_disk sets h->drv[drv_index].queue = NULL
+ * which keeps the interrupt handler from starting
+ * the queue.
+ */
+ ret = deregister_disk(h, drv_index, 0);
h->drv[drv_index].busy_configuring = 0;
}
/* If the disk is in use return */
if (ret)
- return;
-
- /* Get information about the disk and modify the driver structure */
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL)
- goto mem_msg;
+ goto freeret;
- cciss_read_capacity(ctlr, drv_index, 1,
- &total_size, &block_size);
-
- /* total size = last LBA + 1 */
- /* FFFFFFFF + 1 = 0, cannot have a logical volume of size 0 */
- /* so we assume this volume this must be >2TB in size */
- if (total_size == (__u32) 0) {
- cciss_read_capacity_16(ctlr, drv_index, 1,
- &total_size, &block_size);
- h->cciss_read = CCISS_READ_16;
- h->cciss_write = CCISS_WRITE_16;
- } else {
- h->cciss_read = CCISS_READ_10;
- h->cciss_write = CCISS_WRITE_10;
- }
- cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
- inq_buff, &h->drv[drv_index]);
+ /* Save the new information from cciss_geometry_inquiry
+ * and serial number inquiry.
+ */
+ h->drv[drv_index].block_size = drvinfo->block_size;
+ h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
+ h->drv[drv_index].heads = drvinfo->heads;
+ h->drv[drv_index].sectors = drvinfo->sectors;
+ h->drv[drv_index].cylinders = drvinfo->cylinders;
+ h->drv[drv_index].raid_level = drvinfo->raid_level;
+ memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
+ memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1);
+ memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1);
+ memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1);
++h->num_luns;
disk = h->gendisk[drv_index];
set_capacity(disk, h->drv[drv_index].nr_blocks);
- /* if it's the controller it's already added */
- if (drv_index) {
- disk->queue = blk_init_queue(do_cciss_request, &h->lock);
- sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
- disk->major = h->major;
- disk->first_minor = drv_index << NWD_SHIFT;
- disk->fops = &cciss_fops;
- disk->private_data = &h->drv[drv_index];
+ /* If it's not disk 0 (drv_index != 0)
+ * or if it was disk 0, but there was previously
+ * no actual corresponding configured logical drive
+ * (raid_leve == -1) then we want to update the
+ * logical drive's information.
+ */
+ if (drv_index || first_time)
+ cciss_add_disk(h, disk, drv_index);
- /* Set up queue information */
- disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
- blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
-
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
-
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
-
- blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
-
- blk_queue_softirq_done(disk->queue, cciss_softirq_done);
-
- disk->queue->queuedata = hba[ctlr];
-
- blk_queue_hardsect_size(disk->queue,
- hba[ctlr]->drv[drv_index].block_size);
-
- h->drv[drv_index].queue = disk->queue;
- add_disk(disk);
- }
-
- freeret:
- kfree(inq_buff);
- return;
- mem_msg:
- printk(KERN_ERR "cciss: out of memory\n");
- goto freeret;
-}
+freeret:
+ kfree(inq_buff);
+ kfree(drvinfo);
+ return;
+mem_msg:
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto freeret;
+}
/* This function will find the first index of the controllers drive array
* that has a -1 for the raid_level and will return that index. This is
* where new drives will be added. If the index to be returned is greater
* than the highest_lun index for the controller then highest_lun is set
* to this new index. If there are no available indexes then -1 is returned.
+ * "controller_node" is used to know if this is a real logical drive, or just
+ * the controller node, which determines if this counts towards highest_lun.
*/
-static int cciss_find_free_drive_index(int ctlr)
+static int cciss_find_free_drive_index(int ctlr, int controller_node)
{
int i;
for (i = 0; i < CISS_MAX_LUN; i++) {
if (hba[ctlr]->drv[i].raid_level == -1) {
if (i > hba[ctlr]->highest_lun)
- hba[ctlr]->highest_lun = i;
+ if (!controller_node)
+ hba[ctlr]->highest_lun = i;
return i;
}
}
return -1;
}
+/* cciss_add_gendisk finds a free hba[]->drv structure
+ * and allocates a gendisk if needed, and sets the lunid
+ * in the drvinfo structure. It returns the index into
+ * the ->drv[] array, or -1 if none are free.
+ * is_controller_node indicates whether highest_lun should
+ * count this disk, or if it's only being added to provide
+ * a means to talk to the controller in case no logical
+ * drives have yet been configured.
+ */
+static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+{
+ int drv_index;
+
+ drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+ if (drv_index == -1)
+ return -1;
+ /*Check if the gendisk needs to be allocated */
+ if (!h->gendisk[drv_index]) {
+ h->gendisk[drv_index] =
+ alloc_disk(1 << NWD_SHIFT);
+ if (!h->gendisk[drv_index]) {
+ printk(KERN_ERR "cciss%d: could not "
+ "allocate a new disk %d\n",
+ h->ctlr, drv_index);
+ return -1;
+ }
+ }
+ h->drv[drv_index].LunID = lunid;
+ if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index))
+ goto err_free_disk;
+
+ /* Don't need to mark this busy because nobody */
+ /* else knows about this disk yet to contend */
+ /* for access to it. */
+ h->drv[drv_index].busy_configuring = 0;
+ wmb();
+ return drv_index;
+
+err_free_disk:
+ put_disk(h->gendisk[drv_index]);
+ h->gendisk[drv_index] = NULL;
+ return -1;
+}
+
+/* This is for the special case of a controller which
+ * has no logical drives. In this case, we still need
+ * to register a disk so the controller can be accessed
+ * by the Array Config Utility.
+ */
+static void cciss_add_controller_node(ctlr_info_t *h)
+{
+ struct gendisk *disk;
+ int drv_index;
+
+ if (h->gendisk[0] != NULL) /* already did this? Then bail. */
+ return;
+
+ drv_index = cciss_add_gendisk(h, 0, 1);
+ if (drv_index == -1) {
+ printk(KERN_WARNING "cciss%d: could not "
+ "add disk 0.\n", h->ctlr);
+ return;
+ }
+ h->drv[drv_index].block_size = 512;
+ h->drv[drv_index].nr_blocks = 0;
+ h->drv[drv_index].heads = 0;
+ h->drv[drv_index].sectors = 0;
+ h->drv[drv_index].cylinders = 0;
+ h->drv[drv_index].raid_level = -1;
+ memset(h->drv[drv_index].serial_no, 0, 16);
+ disk = h->gendisk[drv_index];
+ cciss_add_disk(h, disk, drv_index);
+}
+
/* This function will add and remove logical drives from the Logical
* drive array of the controller and maintain persistency of ordering
* so that mount points are preserved until the next reboot. This allows
* without a re-ordering of those drives.
* INPUT
* h = The controller to perform the operations on
- * del_disk = The disk to remove if specified. If the value given
- * is NULL then no disk is removed.
*/
-static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time)
{
int ctlr = h->ctlr;
int num_luns;
ReportLunData_struct *ld_buff = NULL;
- drive_info_struct *drv = NULL;
int return_code;
int listlength = 0;
int i;
__u32 lunid = 0;
unsigned long flags;
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+
/* Set busy_configuring flag for this operation */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
if (h->busy_configuring) {
return -EBUSY;
}
h->busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+
+ ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
+ if (ld_buff == NULL)
+ goto mem_msg;
+
+ return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
+ sizeof(ReportLunData_struct),
+ 0, CTLR_LUNID, TYPE_CMD);
- /* if del_disk is NULL then we are being called to add a new disk
- * and update the logical drive table. If it is not NULL then
- * we will check if the disk is in use or not.
+ if (return_code == IO_OK)
+ listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
+ else { /* reading number of logical volumes failed */
+ printk(KERN_WARNING "cciss: report logical volume"
+ " command failed\n");
+ listlength = 0;
+ goto freeret;
+ }
+
+ num_luns = listlength / 8; /* 8 bytes per entry */
+ if (num_luns > CISS_MAX_LUN) {
+ num_luns = CISS_MAX_LUN;
+ printk(KERN_WARNING "cciss: more luns configured"
+ " on controller than can be handled by"
+ " this driver.\n");
+ }
+
+ if (num_luns == 0)
+ cciss_add_controller_node(h);
+
+ /* Compare controller drive array to driver's drive array
+ * to see if any drives are missing on the controller due
+ * to action of Array Config Utility (user deletes drive)
+ * and deregister logical drives which have disappeared.
*/
- if (del_disk != NULL) {
- drv = get_drv(del_disk);
- drv->busy_configuring = 1;
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return_code = deregister_disk(del_disk, drv, 1);
- drv->busy_configuring = 0;
- h->busy_configuring = 0;
- return return_code;
- } else {
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
+ for (i = 0; i <= h->highest_lun; i++) {
+ int j;
+ drv_found = 0;
- ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL)
- goto mem_msg;
-
- return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
- sizeof(ReportLunData_struct), 0,
- 0, 0, TYPE_CMD);
-
- if (return_code == IO_OK) {
- listlength =
- be32_to_cpu(*(__u32 *) ld_buff->LUNListLength);
- } else { /* reading number of logical volumes failed */
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
- listlength = 0;
- goto freeret;
- }
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i].raid_level == -1)
+ continue;
- num_luns = listlength / 8; /* 8 bytes per entry */
- if (num_luns > CISS_MAX_LUN) {
- num_luns = CISS_MAX_LUN;
- printk(KERN_WARNING "cciss: more luns configured"
- " on controller than can be handled by"
- " this driver.\n");
+ for (j = 0; j < num_luns; j++) {
+ memcpy(&lunid, &ld_buff->LUN[j][0], 4);
+ lunid = le32_to_cpu(lunid);
+ if (h->drv[i].LunID == lunid) {
+ drv_found = 1;
+ break;
+ }
+ }
+ if (!drv_found) {
+ /* Deregister it from the OS, it's gone. */
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ h->drv[i].busy_configuring = 1;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return_code = deregister_disk(h, i, 1);
+ cciss_destroy_ld_sysfs_entry(&h->drv[i]);
+ h->drv[i].busy_configuring = 0;
}
+ }
+
+ /* Compare controller drive array to driver's drive array.
+ * Check for updates in the drive information and any new drives
+ * on the controller due to ACU adding logical drives, or changing
+ * a logical drive's size, etc. Reregister any new/changed drives
+ */
+ for (i = 0; i < num_luns; i++) {
+ int j;
+
+ drv_found = 0;
+
+ memcpy(&lunid, &ld_buff->LUN[i][0], 4);
+ lunid = le32_to_cpu(lunid);
- /* Compare controller drive array to drivers drive array.
- * Check for updates in the drive information and any new drives
- * on the controller.
+ /* Find if the LUN is already in the drive array
+ * of the driver. If so then update its info
+ * if not in use. If it does not exist then find
+ * the first free index and add it.
*/
- for (i = 0; i < num_luns; i++) {
- int j;
-
- drv_found = 0;
-
- lunid = (0xff &
- (unsigned int)(ld_buff->LUN[i][3])) << 24;
- lunid |= (0xff &
- (unsigned int)(ld_buff->LUN[i][2])) << 16;
- lunid |= (0xff &
- (unsigned int)(ld_buff->LUN[i][1])) << 8;
- lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
- /* Find if the LUN is already in the drive array
- * of the controller. If so then update its info
- * if not is use. If it does not exist then find
- * the first free index and add it.
- */
- for (j = 0; j <= h->highest_lun; j++) {
- if (h->drv[j].LunID == lunid) {
- drv_index = j;
- drv_found = 1;
- }
+ for (j = 0; j <= h->highest_lun; j++) {
+ if (h->drv[j].raid_level != -1 &&
+ h->drv[j].LunID == lunid) {
+ drv_index = j;
+ drv_found = 1;
+ break;
}
+ }
- /* check if the drive was found already in the array */
- if (!drv_found) {
- drv_index = cciss_find_free_drive_index(ctlr);
- if (drv_index == -1)
- goto freeret;
-
- /*Check if the gendisk needs to be allocated */
- if (!h->gendisk[drv_index]){
- h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
- if (!h->gendisk[drv_index]){
- printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
- goto mem_msg;
- }
- }
- }
- h->drv[drv_index].LunID = lunid;
- cciss_update_drive_info(ctlr, drv_index);
- } /* end for */
- } /* end else */
+ /* check if the drive was found already in the array */
+ if (!drv_found) {
+ drv_index = cciss_add_gendisk(h, lunid, 0);
+ if (drv_index == -1)
+ goto freeret;
+ }
+ cciss_update_drive_info(ctlr, drv_index, first_time);
+ } /* end for */
- freeret:
+freeret:
kfree(ld_buff);
h->busy_configuring = 0;
/* We return -1 here to tell the ACU that we have registered/updated
* additional times.
*/
return -1;
- mem_msg:
+mem_msg:
printk(KERN_ERR "cciss: out of memory\n");
+ h->busy_configuring = 0;
goto freeret;
}
* the highest_lun should be left unchanged and the LunID
* should not be cleared.
*/
-static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
+static int deregister_disk(ctlr_info_t *h, int drv_index,
int clear_all)
{
int i;
- ctlr_info_t *h = get_host(disk);
+ struct gendisk *disk;
+ drive_info_struct *drv;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
+ drv = &h->drv[drv_index];
+ disk = h->gendisk[drv_index];
+
/* make sure logical volume is NOT is use */
if (clear_all || (h->gendisk[0] == disk)) {
if (drv->usage_count > 1)
* allows us to delete disk zero but keep the controller registered.
*/
if (h->gendisk[0] != disk) {
- if (disk) {
- request_queue_t *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- if (q) {
- blk_cleanup_queue(q);
- /* Set drv->queue to NULL so that we do not try
- * to call blk_start_queue on this queue in the
- * interrupt handler
- */
- drv->queue = NULL;
- }
- /* If clear_all is set then we are deleting the logical
- * drive, not just refreshing its info. For drives
- * other than disk 0 we will call put_disk. We do not
- * do this for disk 0 as we need it to be able to
- * configure the controller.
- */
- if (clear_all){
- /* This isn't pretty, but we need to find the
- * disk in our array and NULL our the pointer.
- * This is so that we will call alloc_disk if
- * this index is used again later.
- */
- for (i=0; i < CISS_MAX_LUN; i++){
- if(h->gendisk[i] == disk){
- h->gendisk[i] = NULL;
- break;
- }
+ struct request_queue *q = disk->queue;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ if (q) {
+ blk_cleanup_queue(q);
+ /* Set drv->queue to NULL so that we do not try
+ * to call blk_start_queue on this queue in the
+ * interrupt handler
+ */
+ drv->queue = NULL;
+ }
+ /* If clear_all is set then we are deleting the logical
+ * drive, not just refreshing its info. For drives
+ * other than disk 0 we will call put_disk. We do not
+ * do this for disk 0 as we need it to be able to
+ * configure the controller.
+ */
+ if (clear_all){
+ /* This isn't pretty, but we need to find the
+ * disk in our array and NULL our the pointer.
+ * This is so that we will call alloc_disk if
+ * this index is used again later.
+ */
+ for (i=0; i < CISS_MAX_LUN; i++){
+ if (h->gendisk[i] == disk) {
+ h->gendisk[i] = NULL;
+ break;
}
- put_disk(disk);
}
+ put_disk(disk);
}
} else {
set_capacity(disk, 0);
if (drv == h->drv + h->highest_lun) {
/* if so, find the new hightest lun */
int i, newhighest = -1;
- for (i = 0; i < h->highest_lun; i++) {
+ for (i = 0; i <= h->highest_lun; i++) {
/* if the disk has size > 0, it is available */
if (h->drv[i].heads)
newhighest = i;
return 0;
}
-static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: periph device address is scsi3addr */
- unsigned int log_unit, __u8 page_code,
- unsigned char *scsi3addr, int cmd_type)
+static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
+ size_t size, __u8 page_code, unsigned char *scsi3addr,
+ int cmd_type)
{
ctlr_info_t *h = hba[ctlr];
u64bit buff_dma_handle;
c->Header.SGTotal = 0;
}
c->Header.Tag.lower = c->busaddr;
+ memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
c->Request.Type.Type = cmd_type;
if (cmd_type == TYPE_CMD) {
switch (cmd) {
case CISS_INQUIRY:
- /* If the logical unit number is 0 then, this is going
- to controller so It's a physical command
- mode = 0 target = 0. So we have nothing to write.
- otherwise, if use_unit_num == 1,
- mode = 1(volume set addressing) target = LUNID
- otherwise, if use_unit_num == 2,
- mode = 0(periph dev addr) target = scsi3addr */
- if (use_unit_num == 1) {
- c->Header.LUN.LogDev.VolId =
- h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
- } else if (use_unit_num == 2) {
- memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
- 8);
- c->Header.LUN.LogDev.Mode = 0;
- }
/* are we trying to read a vital product page */
if (page_code != 0) {
c->Request.CDB[1] = 0x01;
break;
case CCISS_READ_CAPACITY:
- c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
c->Request.CDBLen = 10;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_READ;
c->Request.CDB[0] = cmd;
break;
case CCISS_READ_CAPACITY_16:
- c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
- c->Header.LUN.LogDev.Mode = 1;
c->Request.CDBLen = 16;
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction = XFER_READ;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
break;
+ case TEST_UNIT_READY:
+ c->Request.CDBLen = 6;
+ c->Request.Type.Attribute = ATTR_SIMPLE;
+ c->Request.Type.Direction = XFER_NONE;
+ c->Request.Timeout = 0;
+ break;
default:
printk(KERN_WARNING
"cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
memcpy(&c->Request.CDB[4], buff, 8);
break;
case 1: /* RESET message */
- c->Request.CDBLen = 12;
+ c->Request.CDBLen = 16;
c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.Type.Direction = XFER_NONE;
c->Request.Timeout = 0;
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd; /* reset */
- c->Request.CDB[1] = 0x04; /* reset a LUN */
+ c->Request.CDB[1] = 0x03; /* reset a target */
break;
case 3: /* No-Op message */
c->Request.CDBLen = 1;
return status;
}
-static int sendcmd_withirq(__u8 cmd,
- int ctlr,
- void *buff,
- size_t size,
- unsigned int use_unit_num,
- unsigned int log_unit, __u8 page_code, int cmd_type)
+static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
{
- ctlr_info_t *h = hba[ctlr];
- CommandList_struct *c;
+ switch (c->err_info->ScsiStatus) {
+ case SAM_STAT_GOOD:
+ return IO_OK;
+ case SAM_STAT_CHECK_CONDITION:
+ switch (0xf & c->err_info->SenseInfo[2]) {
+ case 0: return IO_OK; /* no sense */
+ case 1: return IO_OK; /* recovered error */
+ default:
+ printk(KERN_WARNING "cciss%d: cmd 0x%02x "
+ "check condition, sense key = 0x%02x\n",
+ h->ctlr, c->Request.CDB[0],
+ c->err_info->SenseInfo[2]);
+ }
+ break;
+ default:
+ printk(KERN_WARNING "cciss%d: cmd 0x%02x"
+ "scsi status = 0x%02x\n", h->ctlr,
+ c->Request.CDB[0], c->err_info->ScsiStatus);
+ break;
+ }
+ return IO_ERROR;
+}
+
+static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
+{
+ int return_status = IO_OK;
+
+ if (c->err_info->CommandStatus == CMD_SUCCESS)
+ return IO_OK;
+
+ switch (c->err_info->CommandStatus) {
+ case CMD_TARGET_STATUS:
+ return_status = check_target_status(h, c);
+ break;
+ case CMD_DATA_UNDERRUN:
+ case CMD_DATA_OVERRUN:
+ /* expected for inquiry and report lun commands */
+ break;
+ case CMD_INVALID:
+ printk(KERN_WARNING "cciss: cmd 0x%02x is "
+ "reported invalid\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_PROTOCOL_ERR:
+ printk(KERN_WARNING "cciss: cmd 0x%02x has "
+ "protocol error \n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_HARDWARE_ERR:
+ printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ " hardware error\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_CONNECTION_LOST:
+ printk(KERN_WARNING "cciss: cmd 0x%02x had "
+ "connection lost\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_ABORTED:
+ printk(KERN_WARNING "cciss: cmd 0x%02x was "
+ "aborted\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_ABORT_FAILED:
+ printk(KERN_WARNING "cciss: cmd 0x%02x reports "
+ "abort failed\n", c->Request.CDB[0]);
+ return_status = IO_ERROR;
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ printk(KERN_WARNING
+ "cciss%d: unsolicited abort 0x%02x\n", h->ctlr,
+ c->Request.CDB[0]);
+ return_status = IO_NEEDS_RETRY;
+ break;
+ default:
+ printk(KERN_WARNING "cciss: cmd 0x%02x returned "
+ "unknown status %x\n", c->Request.CDB[0],
+ c->err_info->CommandStatus);
+ return_status = IO_ERROR;
+ }
+ return return_status;
+}
+
+static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
+ int attempt_retry)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
u64bit buff_dma_handle;
unsigned long flags;
- int return_status;
- DECLARE_COMPLETION_ONSTACK(wait);
+ int return_status = IO_OK;
- if ((c = cmd_alloc(h, 0)) == NULL)
- return -ENOMEM;
- return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
- log_unit, page_code, NULL, cmd_type);
- if (return_status != IO_OK) {
- cmd_free(h, c, 0);
- return return_status;
- }
- resend_cmd2:
+resend_cmd2:
c->waiting = &wait;
-
/* Put the request on the tail of the queue and send it */
- spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
addQ(&h->reqQ, c);
h->Qdepth++;
start_io(h);
- spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
wait_for_completion(&wait);
- if (c->err_info->CommandStatus != 0) { /* an error has occurred */
- switch (c->err_info->CommandStatus) {
- case CMD_TARGET_STATUS:
- printk(KERN_WARNING "cciss: cmd %p has "
- " completed with errors\n", c);
- if (c->err_info->ScsiStatus) {
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status = %x\n",
- c, c->err_info->ScsiStatus);
- }
+ if (c->err_info->CommandStatus == 0 || !attempt_retry)
+ goto command_done;
- break;
- case CMD_DATA_UNDERRUN:
- case CMD_DATA_OVERRUN:
- /* expected for inquire and report lun commands */
- break;
- case CMD_INVALID:
- printk(KERN_WARNING "cciss: Cmd %p is "
- "reported invalid\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", c);
- return_status = IO_ERROR;
- break;
- case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
- " hardware error\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
- "connection lost\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
- "aborted\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
- "abort failed\n", c);
- return_status = IO_ERROR;
- break;
- case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING
- "cciss%d: unsolicited abort %p\n", ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", ctlr, c);
- c->retry_count++;
- /* erase the old error information */
- memset(c->err_info, 0,
- sizeof(ErrorInfo_struct));
- return_status = IO_OK;
- INIT_COMPLETION(wait);
- goto resend_cmd2;
- }
- return_status = IO_ERROR;
- break;
- default:
- printk(KERN_WARNING "cciss: cmd %p returned "
- "unknown status %x\n", c,
- c->err_info->CommandStatus);
- return_status = IO_ERROR;
- }
+ return_status = process_sendcmd_error(h, c);
+
+ if (return_status == IO_NEEDS_RETRY &&
+ c->retry_count < MAX_CMD_RETRIES) {
+ printk(KERN_WARNING "cciss%d: retrying 0x%02x\n", h->ctlr,
+ c->Request.CDB[0]);
+ c->retry_count++;
+ /* erase the old error information */
+ memset(c->err_info, 0, sizeof(ErrorInfo_struct));
+ return_status = IO_OK;
+ INIT_COMPLETION(wait);
+ goto resend_cmd2;
}
+
+command_done:
/* unlock the buffers from DMA */
buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
+ return return_status;
+}
+
+static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
+ __u8 page_code, unsigned char scsi3addr[],
+ int cmd_type)
+{
+ ctlr_info_t *h = hba[ctlr];
+ CommandList_struct *c;
+ int return_status;
+
+ c = cmd_alloc(h, 0);
+ if (!c)
+ return -ENOMEM;
+ return_status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ scsi3addr, cmd_type);
+ if (return_status == IO_OK)
+ return_status = sendcmd_withirq_core(h, c, 1);
+
cmd_free(h, c, 0);
return return_status;
}
{
int return_code;
unsigned long t;
+ unsigned char scsi3addr[8];
memset(inq_buff, 0, sizeof(InquiryData_struct));
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq)
return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
- inq_buff, sizeof(*inq_buff), 1,
- logvol, 0xC1, TYPE_CMD);
+ inq_buff, sizeof(*inq_buff),
+ 0xC1, scsi3addr, TYPE_CMD);
else
return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
- sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
+ sizeof(*inq_buff), 0xC1, scsi3addr,
TYPE_CMD);
if (return_code == IO_OK) {
if (inq_buff->data_byte[8] == 0xFF) {
"does not support reading geometry\n");
drv->heads = 255;
drv->sectors = 32; // Sectors per track
+ drv->cylinders = total_size + 1;
+ drv->raid_level = RAID_UNKNOWN;
} else {
drv->heads = inq_buff->data_byte[6];
drv->sectors = inq_buff->data_byte[7];
drv->raid_level = inq_buff->data_byte[8];
}
drv->block_size = block_size;
- drv->nr_blocks = total_size;
+ drv->nr_blocks = total_size + 1;
t = drv->heads * drv->sectors;
if (t > 1) {
- unsigned rem = sector_div(total_size, t);
+ sector_t real_size = total_size + 1;
+ unsigned long rem = sector_div(real_size, t);
if (rem)
- total_size++;
- drv->cylinders = total_size;
+ real_size++;
+ drv->cylinders = real_size;
}
} else { /* Get geometry failed */
printk(KERN_WARNING "cciss: reading geometry failed\n");
{
ReadCapdata_struct *buf;
int return_code;
- buf = kmalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
- if (buf == NULL) {
+ unsigned char scsi3addr[8];
+
+ buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
+ if (!buf) {
printk(KERN_WARNING "cciss: out of memory\n");
return;
}
- memset(buf, 0, sizeof(ReadCapdata_struct));
+
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq)
return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(ReadCapdata_struct),
- 1, logvol, 0, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
else
return_code = sendcmd(CCISS_READ_CAPACITY,
ctlr, buf, sizeof(ReadCapdata_struct),
- 1, logvol, 0, NULL, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
if (return_code == IO_OK) {
- *total_size = be32_to_cpu(*(__u32 *) buf->total_size)+1;
- *block_size = be32_to_cpu(*(__u32 *) buf->block_size);
+ *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
+ *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
printk(KERN_WARNING "cciss: read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- if (*total_size != (__u32) 0)
+ if (*total_size != 0)
printk(KERN_INFO " blocks= %llu block_size= %d\n",
- (unsigned long long)*total_size, *block_size);
+ (unsigned long long)*total_size+1, *block_size);
kfree(buf);
- return;
}
static void
{
ReadCapdata_struct_16 *buf;
int return_code;
- buf = kmalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
- if (buf == NULL) {
+ unsigned char scsi3addr[8];
+
+ buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
+ if (!buf) {
printk(KERN_WARNING "cciss: out of memory\n");
return;
}
- memset(buf, 0, sizeof(ReadCapdata_struct_16));
+
+ log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
if (withirq) {
return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
ctlr, buf, sizeof(ReadCapdata_struct_16),
- 1, logvol, 0, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
}
else {
return_code = sendcmd(CCISS_READ_CAPACITY_16,
ctlr, buf, sizeof(ReadCapdata_struct_16),
- 1, logvol, 0, NULL, TYPE_CMD);
+ 0, scsi3addr, TYPE_CMD);
}
if (return_code == IO_OK) {
- *total_size = be64_to_cpu(*(__u64 *) buf->total_size)+1;
- *block_size = be32_to_cpu(*(__u32 *) buf->block_size);
+ *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
+ *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
} else { /* read capacity command failed */
printk(KERN_WARNING "cciss: read capacity failed\n");
*total_size = 0;
*block_size = BLOCK_SIZE;
}
printk(KERN_INFO " blocks= %llu block_size= %d\n",
- (unsigned long long)*total_size, *block_size);
+ (unsigned long long)*total_size+1, *block_size);
kfree(buf);
- return;
}
static int cciss_revalidate(struct gendisk *disk)
cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
inq_buff, drv);
- blk_queue_hardsect_size(drv->queue, drv->block_size);
+ blk_queue_logical_block_size(drv->queue, drv->block_size);
set_capacity(disk, drv->nr_blocks);
kfree(inq_buff);
return 1;
}
-static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
-{
- /* We get in here if sendcmd() is polling for completions
- and gets some command back that it wasn't expecting --
- something other than that which it just sent down.
- Ordinarily, that shouldn't happen, but it can happen when
- the scsi tape stuff gets into error handling mode, and
- starts using sendcmd() to try to abort commands and
- reset tape drives. In that case, sendcmd may pick up
- completions of commands that were sent to logical drives
- through the block i/o system, or cciss ioctls completing, etc.
- In that case, we need to save those completions for later
- processing by the interrupt handler.
- */
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
-
- /* If it's not the scsi tape stuff doing error handling, (abort */
- /* or reset) then we don't expect anything weird. */
- if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
-#endif
- printk(KERN_WARNING "cciss cciss%d: SendCmd "
- "Invalid command list address returned! (%lx)\n",
- ctlr, complete);
- /* not much we can do. */
-#ifdef CONFIG_CISS_SCSI_TAPE
- return 1;
- }
-
- /* We've sent down an abort or reset, but something else
- has completed */
- if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
- /* Uh oh. No room to save it for later... */
- printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
- "reject list overflow, command lost!\n", ctlr);
- return 1;
- }
- /* Save it for later */
- srl->complete[srl->ncompletions] = complete;
- srl->ncompletions++;
-#endif
- return 0;
-}
-
-/*
- * Send a command to the controller, and wait for it to complete.
- * Only used at init time.
+/* Send command c to controller h and poll for it to complete.
+ * Turns interrupts off on the board. Used at driver init time
+ * and during SCSI error recovery.
*/
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num, /* 0: address the controller,
- 1: address logical volume log_unit,
- 2: periph device address is scsi3addr */
- unsigned int log_unit,
- __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
{
- CommandList_struct *c;
int i;
unsigned long complete;
- ctlr_info_t *info_p = hba[ctlr];
+ int status = IO_ERROR;
u64bit buff_dma_handle;
- int status, done = 0;
- if ((c = cmd_alloc(info_p, 1)) == NULL) {
- printk(KERN_WARNING "cciss: unable to get memory");
- return IO_ERROR;
- }
- status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
- log_unit, page_code, scsi3addr, cmd_type);
- if (status != IO_OK) {
- cmd_free(info_p, c, 1);
- return status;
- }
- resend_cmd1:
- /*
- * Disable interrupt
- */
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: turning intr off\n");
-#endif /* CCISS_DEBUG */
- info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
+resend_cmd1:
+
+ /* Disable interrupt on the board. */
+ h->access.set_intr_mask(h, CCISS_INTR_OFF);
/* Make sure there is room in the command FIFO */
/* Actually it should be completely empty at this time */
/* tape side of the driver. */
for (i = 200000; i > 0; i--) {
/* if fifo isn't full go */
- if (!(info_p->access.fifo_full(info_p))) {
-
+ if (!(h->access.fifo_full(h)))
break;
- }
udelay(10);
printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
- " waiting!\n", ctlr);
+ " waiting!\n", h->ctlr);
}
- /*
- * Send the cmd
- */
- info_p->access.submit_command(info_p, c);
- done = 0;
+ h->access.submit_command(h, c); /* Send the cmd */
do {
- complete = pollcomplete(ctlr);
+ complete = pollcomplete(h->ctlr);
#ifdef CCISS_DEBUG
printk(KERN_DEBUG "cciss: command completed\n");
if (complete == 1) {
printk(KERN_WARNING
"cciss cciss%d: SendCmd Timeout out, "
- "No command list address returned!\n", ctlr);
+ "No command list address returned!\n", h->ctlr);
status = IO_ERROR;
- done = 1;
break;
}
- /* This will need to change for direct lookup completions */
- if ((complete & CISS_ERROR_BIT)
- && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
- /* if data overrun or underun on Report command
- ignore it
- */
- if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
- (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
- (c->Request.CDB[0] == CISS_INQUIRY)) &&
- ((c->err_info->CommandStatus ==
- CMD_DATA_OVERRUN) ||
- (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
- )) {
- complete = c->busaddr;
- } else {
- if (c->err_info->CommandStatus ==
- CMD_UNSOLICITED_ABORT) {
- printk(KERN_WARNING "cciss%d: "
- "unsolicited abort %p\n",
- ctlr, c);
- if (c->retry_count < MAX_CMD_RETRIES) {
- printk(KERN_WARNING
- "cciss%d: retrying %p\n",
- ctlr, c);
- c->retry_count++;
- /* erase the old error */
- /* information */
- memset(c->err_info, 0,
- sizeof
- (ErrorInfo_struct));
- goto resend_cmd1;
- } else {
- printk(KERN_WARNING
- "cciss%d: retried %p too "
- "many times\n", ctlr, c);
- status = IO_ERROR;
- goto cleanup1;
- }
- } else if (c->err_info->CommandStatus ==
- CMD_UNABORTABLE) {
- printk(KERN_WARNING
- "cciss%d: command could not be aborted.\n",
- ctlr);
- status = IO_ERROR;
- goto cleanup1;
- }
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " Error %x \n", ctlr,
- c->err_info->CommandStatus);
- printk(KERN_WARNING "ciss ciss%d: sendcmd"
- " offensive info\n"
- " size %x\n num %x value %x\n",
- ctlr,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_size,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_num,
- c->err_info->MoreErrInfo.Invalid_Cmd.
- offense_value);
- status = IO_ERROR;
- goto cleanup1;
- }
+ /* Make sure it's the command we're expecting. */
+ if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
+ printk(KERN_WARNING "cciss%d: Unexpected command "
+ "completion.\n", h->ctlr);
+ continue;
}
- /* This will need changing for direct lookup completions */
- if (complete != c->busaddr) {
- if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
- BUG(); /* we are pretty much hosed if we get here. */
+
+ /* It is our command. If no error, we're done. */
+ if (!(complete & CISS_ERROR_BIT)) {
+ status = IO_OK;
+ break;
+ }
+
+ /* There is an error... */
+
+ /* if data overrun or underun on Report command ignore it */
+ if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
+ (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
+ (c->Request.CDB[0] == CISS_INQUIRY)) &&
+ ((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
+ (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
+ complete = c->busaddr;
+ status = IO_OK;
+ break;
+ }
+
+ if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
+ printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
+ h->ctlr, c);
+ if (c->retry_count < MAX_CMD_RETRIES) {
+ printk(KERN_WARNING "cciss%d: retrying %p\n",
+ h->ctlr, c);
+ c->retry_count++;
+ /* erase the old error information */
+ memset(c->err_info, 0, sizeof(c->err_info));
+ goto resend_cmd1;
}
- continue;
- } else
- done = 1;
- } while (!done);
+ printk(KERN_WARNING "cciss%d: retried %p too many "
+ "times\n", h->ctlr, c);
+ status = IO_ERROR;
+ break;
+ }
+
+ if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
+ printk(KERN_WARNING "cciss%d: command could not be "
+ "aborted.\n", h->ctlr);
+ status = IO_ERROR;
+ break;
+ }
+
+ if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
+ status = check_target_status(h, c);
+ break;
+ }
+
+ printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
+ printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
+ c->Request.CDB[0], c->err_info->CommandStatus);
+ status = IO_ERROR;
+ break;
+
+ } while (1);
- cleanup1:
/* unlock the data buffer from DMA */
buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
- pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
+ pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* if we saved some commands for later, process them now. */
- if (info_p->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, info_p);
-#endif
- cmd_free(info_p, c, 1);
+ return status;
+}
+
+/*
+ * Send a command to the controller, and wait for it to complete.
+ * Used at init time, and during SCSI error recovery.
+ */
+static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
+ __u8 page_code, unsigned char *scsi3addr, int cmd_type)
+{
+ CommandList_struct *c;
+ int status;
+
+ c = cmd_alloc(hba[ctlr], 1);
+ if (!c) {
+ printk(KERN_WARNING "cciss: unable to get memory");
+ return IO_ERROR;
+ }
+ status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
+ scsi3addr, cmd_type);
+ if (status == IO_OK)
+ status = sendcmd_core(hba[ctlr], c);
+ cmd_free(hba[ctlr], c, 1);
return status;
}
{
CommandList_struct *c;
- while ((c = h->reqQ) != NULL) {
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
/* can't do anything if fifo is full */
if ((h->access.fifo_full(h))) {
printk(KERN_WARNING "cciss: fifo full\n");
}
/* Get the first entry from the Request Q */
- removeQ(&(h->reqQ), c);
+ removeQ(c);
h->Qdepth--;
/* Tell the controller execute command */
h->access.submit_command(h, c);
/* Put job onto the completed Q */
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
}
memset(c->err_info, 0, sizeof(ErrorInfo_struct));
/* add it to software queue and then send it to the controller */
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
start_io(h);
}
+static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
+ unsigned int msg_byte, unsigned int host_byte,
+ unsigned int driver_byte)
+{
+ /* inverse of macros in scsi.h */
+ return (scsi_status_byte & 0xff) |
+ ((msg_byte & 0xff) << 8) |
+ ((host_byte & 0xff) << 16) |
+ ((driver_byte & 0xff) << 24);
+}
+
+static inline int evaluate_target_status(ctlr_info_t *h,
+ CommandList_struct *cmd, int *retry_cmd)
+{
+ unsigned char sense_key;
+ unsigned char status_byte, msg_byte, host_byte, driver_byte;
+ int error_value;
+
+ *retry_cmd = 0;
+ /* If we get in here, it means we got "target status", that is, scsi status */
+ status_byte = cmd->err_info->ScsiStatus;
+ driver_byte = DRIVER_OK;
+ msg_byte = cmd->err_info->CommandStatus; /* correct? seems too device specific */
+
+ if (blk_pc_request(cmd->rq))
+ host_byte = DID_PASSTHROUGH;
+ else
+ host_byte = DID_OK;
+
+ error_value = make_status_bytes(status_byte, msg_byte,
+ host_byte, driver_byte);
+
+ if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
+ if (!blk_pc_request(cmd->rq))
+ printk(KERN_WARNING "cciss: cmd %p "
+ "has SCSI Status 0x%x\n",
+ cmd, cmd->err_info->ScsiStatus);
+ return error_value;
+ }
+
+ /* check the sense key */
+ sense_key = 0xf & cmd->err_info->SenseInfo[2];
+ /* no status or recovered error */
+ if (((sense_key == 0x0) || (sense_key == 0x1)) && !blk_pc_request(cmd->rq))
+ error_value = 0;
+
+ if (check_for_unit_attention(h, cmd)) {
+ *retry_cmd = !blk_pc_request(cmd->rq);
+ return 0;
+ }
+
+ if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
+ if (error_value != 0)
+ printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ " sense key = 0x%x\n", cmd, sense_key);
+ return error_value;
+ }
+
+ /* SG_IO or similar, copy sense data back */
+ if (cmd->rq->sense) {
+ if (cmd->rq->sense_len > cmd->err_info->SenseLen)
+ cmd->rq->sense_len = cmd->err_info->SenseLen;
+ memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
+ cmd->rq->sense_len);
+ } else
+ cmd->rq->sense_len = 0;
+
+ return error_value;
+}
+
/* checks the status of the job and calls complete buffers to mark all
* buffers for the completed job. Note that this function does not need
* to hold the hba/queue lock.
static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
int timeout)
{
- int status = 1;
int retry_cmd = 0;
+ struct request *rq = cmd->rq;
+
+ rq->errors = 0;
if (timeout)
- status = 0;
+ rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
- if (cmd->err_info->CommandStatus != 0) { /* an error has occurred */
- switch (cmd->err_info->CommandStatus) {
- unsigned char sense_key;
- case CMD_TARGET_STATUS:
- status = 0;
+ if (cmd->err_info->CommandStatus == 0) /* no error has occurred */
+ goto after_error_processing;
- if (cmd->err_info->ScsiStatus == 0x02) {
- printk(KERN_WARNING "cciss: cmd %p "
- "has CHECK CONDITION "
- " byte 2 = 0x%x\n", cmd,
- cmd->err_info->SenseInfo[2]
- );
- /* check the sense key */
- sense_key = 0xf & cmd->err_info->SenseInfo[2];
- /* no status or recovered error */
- if ((sense_key == 0x0) || (sense_key == 0x1)) {
- status = 1;
- }
- } else {
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status 0x%x\n",
- cmd, cmd->err_info->ScsiStatus);
- }
- break;
- case CMD_DATA_UNDERRUN:
+ switch (cmd->err_info->CommandStatus) {
+ case CMD_TARGET_STATUS:
+ rq->errors = evaluate_target_status(h, cmd, &retry_cmd);
+ break;
+ case CMD_DATA_UNDERRUN:
+ if (blk_fs_request(cmd->rq)) {
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data underrun "
"reported\n", cmd);
- break;
- case CMD_DATA_OVERRUN:
+ cmd->rq->resid_len = cmd->err_info->ResidualCnt;
+ }
+ break;
+ case CMD_DATA_OVERRUN:
+ if (blk_fs_request(cmd->rq))
printk(KERN_WARNING "cciss: cmd %p has"
" completed with data overrun "
"reported\n", cmd);
- break;
- case CMD_INVALID:
- printk(KERN_WARNING "cciss: cmd %p is "
- "reported invalid\n", cmd);
- status = 0;
- break;
- case CMD_PROTOCOL_ERR:
- printk(KERN_WARNING "cciss: cmd %p has "
- "protocol error \n", cmd);
- status = 0;
- break;
- case CMD_HARDWARE_ERR:
- printk(KERN_WARNING "cciss: cmd %p had "
- " hardware error\n", cmd);
- status = 0;
- break;
- case CMD_CONNECTION_LOST:
- printk(KERN_WARNING "cciss: cmd %p had "
- "connection lost\n", cmd);
- status = 0;
- break;
- case CMD_ABORTED:
- printk(KERN_WARNING "cciss: cmd %p was "
- "aborted\n", cmd);
- status = 0;
- break;
- case CMD_ABORT_FAILED:
- printk(KERN_WARNING "cciss: cmd %p reports "
- "abort failed\n", cmd);
- status = 0;
- break;
- case CMD_UNSOLICITED_ABORT:
- printk(KERN_WARNING "cciss%d: unsolicited "
- "abort %p\n", h->ctlr, cmd);
- if (cmd->retry_count < MAX_CMD_RETRIES) {
- retry_cmd = 1;
- printk(KERN_WARNING
- "cciss%d: retrying %p\n", h->ctlr, cmd);
- cmd->retry_count++;
- } else
- printk(KERN_WARNING
- "cciss%d: %p retried too "
- "many times\n", h->ctlr, cmd);
- status = 0;
- break;
- case CMD_TIMEOUT:
- printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
- status = 0;
- break;
- default:
- printk(KERN_WARNING "cciss: cmd %p returned "
- "unknown status %x\n", cmd,
- cmd->err_info->CommandStatus);
- status = 0;
- }
+ break;
+ case CMD_INVALID:
+ printk(KERN_WARNING "cciss: cmd %p is "
+ "reported invalid\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_PROTOCOL_ERR:
+ printk(KERN_WARNING "cciss: cmd %p has "
+ "protocol error \n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_HARDWARE_ERR:
+ printk(KERN_WARNING "cciss: cmd %p had "
+ " hardware error\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_CONNECTION_LOST:
+ printk(KERN_WARNING "cciss: cmd %p had "
+ "connection lost\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_ABORTED:
+ printk(KERN_WARNING "cciss: cmd %p was "
+ "aborted\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ break;
+ case CMD_ABORT_FAILED:
+ printk(KERN_WARNING "cciss: cmd %p reports "
+ "abort failed\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ case CMD_UNSOLICITED_ABORT:
+ printk(KERN_WARNING "cciss%d: unsolicited "
+ "abort %p\n", h->ctlr, cmd);
+ if (cmd->retry_count < MAX_CMD_RETRIES) {
+ retry_cmd = 1;
+ printk(KERN_WARNING
+ "cciss%d: retrying %p\n", h->ctlr, cmd);
+ cmd->retry_count++;
+ } else
+ printk(KERN_WARNING
+ "cciss%d: %p retried too "
+ "many times\n", h->ctlr, cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ABORT);
+ break;
+ case CMD_TIMEOUT:
+ printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
+ break;
+ default:
+ printk(KERN_WARNING "cciss: cmd %p returned "
+ "unknown status %x\n", cmd,
+ cmd->err_info->CommandStatus);
+ rq->errors = make_status_bytes(SAM_STAT_GOOD,
+ cmd->err_info->CommandStatus, DRIVER_OK,
+ blk_pc_request(cmd->rq) ? DID_PASSTHROUGH : DID_ERROR);
}
+
+after_error_processing:
+
/* We need to return this command */
if (retry_cmd) {
resend_cciss_cmd(h, cmd);
return;
}
-
cmd->rq->completion_data = cmd;
- cmd->rq->errors = status;
- blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
blk_complete_request(cmd->rq);
}
/*
* Get a request and submit it to the controller.
*/
-static void do_cciss_request(request_queue_t *q)
+static void do_cciss_request(struct request_queue *q)
{
ctlr_info_t *h = q->queuedata;
CommandList_struct *c;
goto startio;
queue:
- creq = elv_next_request(q);
+ creq = blk_peek_request(q);
if (!creq)
goto startio;
if ((c = cmd_alloc(h, 1)) == NULL)
goto full;
- blkdev_dequeue_request(creq);
+ blk_start_request(creq);
spin_unlock_irq(q->queue_lock);
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
c->Request.Type.Direction =
- (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
+ (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
c->Request.Timeout = 0; // Don't time out
c->Request.CDB[0] =
(rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
- start_blk = creq->sector;
+ start_blk = blk_rq_pos(creq);
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
- (int)creq->nr_sectors);
+ printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",
+ (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
#endif /* CCISS_DEBUG */
+ sg_init_table(tmp_sg, MAXSGENTRIES);
seg = blk_rq_map_sg(q, creq, tmp_sg);
/* get the DMA records for the setup */
for (i = 0; i < seg; i++) {
c->SG[i].Len = tmp_sg[i].length;
- temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
+ temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
tmp_sg[i].offset,
tmp_sg[i].length, dir);
c->SG[i].Addr.lower = temp64.val32.lower;
h->maxSG = seg;
#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
- creq->nr_sectors, seg);
+ printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
+ blk_rq_sectors(creq), seg);
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
- if(h->cciss_read == CCISS_READ_10) {
- c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
- c->Request.CDB[3] = (start_blk >> 16) & 0xff;
- c->Request.CDB[4] = (start_blk >> 8) & 0xff;
- c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
- c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ if (likely(blk_fs_request(creq))) {
+ if(h->cciss_read == CCISS_READ_10) {
+ c->Request.CDB[1] = 0;
+ c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
+ c->Request.CDB[3] = (start_blk >> 16) & 0xff;
+ c->Request.CDB[4] = (start_blk >> 8) & 0xff;
+ c->Request.CDB[5] = start_blk & 0xff;
+ c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
+ c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
+ c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ } else {
+ u32 upper32 = upper_32_bits(start_blk);
+
+ c->Request.CDBLen = 16;
+ c->Request.CDB[1]= 0;
+ c->Request.CDB[2]= (upper32 >> 24) & 0xff; //MSB
+ c->Request.CDB[3]= (upper32 >> 16) & 0xff;
+ c->Request.CDB[4]= (upper32 >> 8) & 0xff;
+ c->Request.CDB[5]= upper32 & 0xff;
+ c->Request.CDB[6]= (start_blk >> 24) & 0xff;
+ c->Request.CDB[7]= (start_blk >> 16) & 0xff;
+ c->Request.CDB[8]= (start_blk >> 8) & 0xff;
+ c->Request.CDB[9]= start_blk & 0xff;
+ c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
+ c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
+ c->Request.CDB[12]= (blk_rq_sectors(creq) >> 8) & 0xff;
+ c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
+ c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ }
+ } else if (blk_pc_request(creq)) {
+ c->Request.CDBLen = creq->cmd_len;
+ memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- c->Request.CDBLen = 16;
- c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB
- c->Request.CDB[3]= (start_blk >> 48) & 0xff;
- c->Request.CDB[4]= (start_blk >> 40) & 0xff;
- c->Request.CDB[5]= (start_blk >> 32) & 0xff;
- c->Request.CDB[6]= (start_blk >> 24) & 0xff;
- c->Request.CDB[7]= (start_blk >> 16) & 0xff;
- c->Request.CDB[8]= (start_blk >> 8) & 0xff;
- c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
- c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ BUG();
}
spin_lock_irq(q->queue_lock);
- addQ(&(h->reqQ), c);
+ addQ(&h->reqQ, c);
h->Qdepth++;
if (h->Qdepth > h->maxQsinceinit)
h->maxQsinceinit = h->Qdepth;
static inline unsigned long get_next_completion(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* Any rejects from sendcmd() lying around? Process them first */
- if (h->scsi_rejects.ncompletions == 0)
- return h->access.command_completed(h);
- else {
- struct sendcmd_reject_list *srl;
- int n;
- srl = &h->scsi_rejects;
- n = --srl->ncompletions;
- /* printk("cciss%d: processing saved reject\n", h->ctlr); */
- printk("p");
- return srl->complete[n];
- }
-#else
return h->access.command_completed(h);
-#endif
}
static inline int interrupt_pending(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (h->access.intr_pending(h)
- || (h->scsi_rejects.ncompletions > 0));
-#else
return h->access.intr_pending(h);
-#endif
}
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0))
- && (h->scsi_rejects.ncompletions == 0));
-#else
return (((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0)));
-#endif
}
static irqreturn_t do_cciss_intr(int irq, void *dev_id)
a = c->busaddr;
} else {
+ struct hlist_node *tmp;
+
a &= ~3;
- if ((c = h->cmpQ) == NULL) {
- printk(KERN_WARNING
- "cciss: Completion of %08x ignored\n",
- a1);
- continue;
- }
- while (c->busaddr != a) {
- c = c->next;
- if (c == h->cmpQ)
+ c = NULL;
+ hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+ if (c->busaddr == a)
break;
}
}
* If we've found the command, take it off the
* completion Q and free it
*/
- if (c->busaddr == a) {
- removeQ(&h->cmpQ, c);
+ if (c && c->busaddr == a) {
+ removeQ(c);
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
} else if (c->cmd_type == CMD_IOCTL_PEND) {
}
}
- spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return IRQ_HANDLED;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return IRQ_HANDLED;
+}
+
+static int scan_thread(void *data)
+{
+ ctlr_info_t *h = data;
+ int rc;
+ DECLARE_COMPLETION_ONSTACK(wait);
+ h->rescan_wait = &wait;
+
+ for (;;) {
+ rc = wait_for_completion_interruptible(&wait);
+ if (kthread_should_stop())
+ break;
+ if (!rc)
+ rebuild_lun_table(h, 0);
+ }
+ return 0;
+}
+
+static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
+{
+ if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
+ return 0;
+
+ switch (c->err_info->SenseInfo[12]) {
+ case STATE_CHANGED:
+ printk(KERN_WARNING "cciss%d: a state change "
+ "detected, command retried\n", h->ctlr);
+ return 1;
+ break;
+ case LUN_FAILED:
+ printk(KERN_WARNING "cciss%d: LUN failure "
+ "detected, action required\n", h->ctlr);
+ return 1;
+ break;
+ case REPORT_LUNS_CHANGED:
+ printk(KERN_WARNING "cciss%d: report LUN data "
+ "changed\n", h->ctlr);
+ if (h->rescan_wait)
+ complete(h->rescan_wait);
+ return 1;
+ break;
+ case POWER_OR_RESET:
+ printk(KERN_WARNING "cciss%d: a power on "
+ "or device reset detected\n", h->ctlr);
+ return 1;
+ break;
+ case UNIT_ATTENTION_CLEARED:
+ printk(KERN_WARNING "cciss%d: unit attention "
+ "cleared by another initiator\n", h->ctlr);
+ return 1;
+ break;
+ default:
+ printk(KERN_WARNING "cciss%d: unknown "
+ "unit attention detected\n", h->ctlr);
+ return 1;
+ }
}
/*
return;
}
-static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
+static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
{
ushort subsystem_vendor_id, subsystem_device_id, command;
__u32 board_id, scratchpad = 0;
*/
cciss_interrupt_mode(c, pdev, board_id);
- /*
- * Memory base addr is first addr , the second points to the config
- * table
- */
+ /* find the memory BAR */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (pci_resource_flags(pdev, i) & IORESOURCE_MEM)
+ break;
+ }
+ if (i == DEVICE_COUNT_RESOURCE) {
+ printk(KERN_WARNING "cciss: No memory BAR found\n");
+ err = -ENODEV;
+ goto err_out_free_res;
+ }
+
+ c->paddr = pci_resource_start(pdev, i); /* addressing mode bits
+ * already removed
+ */
- c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
#ifdef CCISS_DEBUG
- printk("address 0 = %x\n", c->paddr);
+ printk("address 0 = %lx\n", c->paddr);
#endif /* CCISS_DEBUG */
c->vaddr = remap_pci_mem(c->paddr, 0x250);
#endif /* CCISS_DEBUG */
cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
#ifdef CCISS_DEBUG
- printk("cfg base address index = %x\n", cfg_base_addr_index);
+ printk("cfg base address index = %llx\n",
+ (unsigned long long)cfg_base_addr_index);
#endif /* CCISS_DEBUG */
if (cfg_base_addr_index == -1) {
printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
#ifdef CCISS_DEBUG
- printk("cfg offset = %x\n", cfg_offset);
+ printk("cfg offset = %llx\n", (unsigned long long)cfg_offset);
#endif /* CCISS_DEBUG */
c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
cfg_base_addr_index) +
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
}
#endif
- /* Disabling DMA prefetch for the P600
- * An ASIC bug may result in a prefetch beyond
- * physical memory.
+ /* Disabling DMA prefetch and refetch for the P600.
+ * An ASIC bug may result in accesses to invalid memory addresses.
+ * We've disabled prefetch for some time now. Testing with XEN
+ * kernels revealed a bug in the refetch if dom0 resides on a P600.
*/
if(board_id == 0x3225103C) {
__u32 dma_prefetch;
+ __u32 dma_refetch;
dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
dma_prefetch |= 0x8000;
writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
+ pci_read_config_dword(pdev, PCI_COMMAND_PARITY, &dma_refetch);
+ dma_refetch |= 0x1;
+ pci_write_config_dword(pdev, PCI_COMMAND_PARITY, dma_refetch);
}
#ifdef CCISS_DEBUG
return err;
}
-/*
- * Gets information about the local volumes attached to the controller.
+/* Function to find the first free pointer into our hba[] array
+ * Returns -1 if no free entries are left.
*/
-static void cciss_getgeometry(int cntl_num)
-{
- ReportLunData_struct *ld_buff;
- InquiryData_struct *inq_buff;
- int return_code;
- int i;
- int listlength = 0;
- __u32 lunid = 0;
- int block_size;
- sector_t total_size;
-
- ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
- if (ld_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- return;
- }
- inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- if (inq_buff == NULL) {
- printk(KERN_ERR "cciss: out of memory\n");
- kfree(ld_buff);
- return;
- }
- /* Get the firmware version */
- return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
- sizeof(InquiryData_struct), 0, 0, 0, NULL,
- TYPE_CMD);
- if (return_code == IO_OK) {
- hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
- hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
- hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
- hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
- } else { /* send command failed */
-
- printk(KERN_WARNING "cciss: unable to determine firmware"
- " version of controller\n");
- }
- /* Get the number of logical volumes */
- return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
- sizeof(ReportLunData_struct), 0, 0, 0, NULL,
- TYPE_CMD);
-
- if (return_code == IO_OK) {
-#ifdef CCISS_DEBUG
- printk("LUN Data\n--------------------------\n");
-#endif /* CCISS_DEBUG */
-
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
- listlength |=
- (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
- listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
- } else { /* reading number of logical volumes failed */
-
- printk(KERN_WARNING "cciss: report logical volume"
- " command failed\n");
- listlength = 0;
- }
- hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry
- if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
- printk(KERN_ERR
- "ciss: only %d number of logical volumes supported\n",
- CISS_MAX_LUN);
- hba[cntl_num]->num_luns = CISS_MAX_LUN;
- }
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
- ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
- ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
- hba[cntl_num]->num_luns);
-#endif /* CCISS_DEBUG */
-
- hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
- for (i = 0; i < CISS_MAX_LUN; i++) {
- if (i < hba[cntl_num]->num_luns) {
- lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
- << 24;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
- << 16;
- lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
- << 8;
- lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
-
- hba[cntl_num]->drv[i].LunID = lunid;
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i,
- ld_buff->LUN[i][0], ld_buff->LUN[i][1],
- ld_buff->LUN[i][2], ld_buff->LUN[i][3],
- hba[cntl_num]->drv[i].LunID);
-#endif /* CCISS_DEBUG */
-
- /* testing to see if 16-byte CDBs are already being used */
- if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
- cciss_read_capacity_16(cntl_num, i, 0,
- &total_size, &block_size);
- goto geo_inq;
- }
- cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
-
- /* total_size = last LBA + 1 */
- if(total_size == (__u32) 0) {
- cciss_read_capacity_16(cntl_num, i, 0,
- &total_size, &block_size);
- hba[cntl_num]->cciss_read = CCISS_READ_16;
- hba[cntl_num]->cciss_write = CCISS_WRITE_16;
- } else {
- hba[cntl_num]->cciss_read = CCISS_READ_10;
- hba[cntl_num]->cciss_write = CCISS_WRITE_10;
- }
-geo_inq:
- cciss_geometry_inquiry(cntl_num, i, 0, total_size,
- block_size, inq_buff,
- &hba[cntl_num]->drv[i]);
- } else {
- /* initialize raid_level to indicate a free space */
- hba[cntl_num]->drv[i].raid_level = -1;
- }
- }
- kfree(ld_buff);
- kfree(inq_buff);
-}
-
-/* Function to find the first free pointer into our hba[] array */
-/* Returns -1 if no free entries are left. */
static int alloc_cciss_hba(void)
{
int i;
for (i = 0; i < MAX_CTLR; i++) {
if (!hba[i]) {
ctlr_info_t *p;
+
p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
if (!p)
goto Enomem;
- p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
- if (!p->gendisk[0])
- goto Enomem;
hba[i] = p;
return i;
}
kfree(p);
}
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+ typedef struct {
+ CommandListHeader_struct CommandHeader;
+ RequestBlock_struct Request;
+ ErrDescriptor_struct ErrorDescriptor;
+ } Command;
+ static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+ Command *cmd;
+ dma_addr_t paddr64;
+ uint32_t paddr32, tag;
+ void __iomem *vaddr;
+ int i, err;
+
+ vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+ CCISS commands, so they must be allocated from the lower 4GiB of
+ memory. */
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+ if (cmd == NULL) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ /* This must fit, because of the 32-bit consistent DMA mask. Also,
+ although there's no guarantee, we assume that the address is at
+ least 4-byte aligned (most likely, it's page-aligned). */
+ paddr32 = paddr64;
+
+ cmd->CommandHeader.ReplyQueue = 0;
+ cmd->CommandHeader.SGList = 0;
+ cmd->CommandHeader.SGTotal = 0;
+ cmd->CommandHeader.Tag.lower = paddr32;
+ cmd->CommandHeader.Tag.upper = 0;
+ memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+ cmd->Request.CDBLen = 16;
+ cmd->Request.Type.Type = TYPE_MSG;
+ cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+ cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.Timeout = 0; /* Don't time out */
+ cmd->Request.CDB[0] = opcode;
+ cmd->Request.CDB[1] = type;
+ memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+ cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+ cmd->ErrorDescriptor.Addr.upper = 0;
+ cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+ writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+ for (i = 0; i < 10; i++) {
+ tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+ if ((tag & ~3) == paddr32)
+ break;
+ schedule_timeout_uninterruptible(HZ);
+ }
+
+ iounmap(vaddr);
+
+ /* we leak the DMA buffer here ... no choice since the controller could
+ still complete the command. */
+ if (i == 10) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ opcode, type);
+ return -ETIMEDOUT;
+ }
+
+ pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+ if (tag & 2) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ opcode, type);
+ return -EIO;
+ }
+
+ printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ opcode, type);
+ return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
+ int pos;
+ u16 control = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSI_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+ }
+ }
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSIX_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI-X\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+ }
+ }
+
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 pmcsr, saved_config_space[32];
+ int i, pos;
+
+ printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+ /* This is very nearly the same thing as
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ but we can't use these nice canned kernel routines on
+ kexec, because they also check the MSI/MSI-X state in PCI
+ configuration space and do the wrong thing when it is
+ set/cleared. Also, the pci_save/restore_state functions
+ violate the ordering requirements for restoring the
+ configuration space from the CCISS document (see the
+ comment below). So we roll our own .... */
+
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+ return -ENODEV;
+ }
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to
+ * D0, this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* Restore the PCI configuration space. The Open CISS
+ * Specification says, "Restore the PCI Configuration
+ * Registers, offsets 00h through 60h. It is important to
+ * restore the command register, 16-bits at offset 04h,
+ * last. Do not restore the configuration status register,
+ * 16-bits at offset 06h." Note that the offset is 2*i. */
+ for (i = 0; i < 32; i++) {
+ if (i == 2 || i == 3)
+ continue;
+ pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ }
+ wmb();
+ pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+ return 0;
+}
+
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
int i;
int j = 0;
int rc;
- int dac;
+ int dac, return_code;
+ InquiryData_struct *inq_buff = NULL;
+
+ if (reset_devices) {
+ /* Reset the controller with a PCI power-cycle */
+ if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
+ for (i=0; i<30; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+
+ schedule_timeout_uninterruptible(HZ);
+ }
+ if (i == 30) {
+ printk(KERN_ERR "cciss: controller seems dead\n");
+ return -EBUSY;
+ }
+ }
i = alloc_cciss_hba();
if (i < 0)
return -1;
hba[i]->busy_initializing = 1;
+ INIT_HLIST_HEAD(&hba[i]->cmpQ);
+ INIT_HLIST_HEAD(&hba[i]->reqQ);
if (cciss_pci_init(hba[i], pdev) != 0)
- goto clean1;
+ goto clean0;
sprintf(hba[i]->devname, "cciss%d", i);
hba[i]->ctlr = i;
hba[i]->pdev = pdev;
+ if (cciss_create_hba_sysfs_entry(hba[i]))
+ goto clean0;
+
/* configure PCI DMA stuff */
- if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
dac = 1;
- else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+ else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
dac = 0;
else {
printk(KERN_ERR "cciss: no suitable DMA available\n");
hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
hba[i]->cmd_pool_bits =
- kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
+ kmalloc(DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ * sizeof(unsigned long), GFP_KERNEL);
hba[i]->cmd_pool = (CommandList_struct *)
pci_alloc_consistent(hba[i]->pdev,
hba[i]->nr_cmds * sizeof(CommandList_struct),
printk(KERN_ERR "cciss: out of memory");
goto clean4;
}
-#ifdef CONFIG_CISS_SCSI_TAPE
- hba[i]->scsi_rejects.complete =
- kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (hba[i]->nr_cmds + 5), GFP_KERNEL);
- if (hba[i]->scsi_rejects.complete == NULL) {
- printk(KERN_ERR "cciss: out of memory");
- goto clean4;
- }
-#endif
spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
/* command and error info recs zeroed out before
they are used */
memset(hba[i]->cmd_pool_bits, 0,
- ((hba[i]->nr_cmds + BITS_PER_LONG -
- 1) / BITS_PER_LONG) * sizeof(unsigned long));
-
-#ifdef CCISS_DEBUG
- printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
-#endif /* CCISS_DEBUG */
+ DIV_ROUND_UP(hba[i]->nr_cmds, BITS_PER_LONG)
+ * sizeof(unsigned long));
- cciss_getgeometry(i);
+ hba[i]->num_luns = 0;
+ hba[i]->highest_lun = -1;
+ for (j = 0; j < CISS_MAX_LUN; j++) {
+ hba[i]->drv[j].raid_level = -1;
+ hba[i]->drv[j].queue = NULL;
+ hba[i]->gendisk[j] = NULL;
+ }
cciss_scsi_setup(i);
/* Turn the interrupts on so we can service requests */
hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
+ /* Get the firmware version */
+ inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
+ if (inq_buff == NULL) {
+ printk(KERN_ERR "cciss: out of memory\n");
+ goto clean4;
+ }
+
+ return_code = sendcmd_withirq(CISS_INQUIRY, i, inq_buff,
+ sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
+ if (return_code == IO_OK) {
+ hba[i]->firm_ver[0] = inq_buff->data_byte[32];
+ hba[i]->firm_ver[1] = inq_buff->data_byte[33];
+ hba[i]->firm_ver[2] = inq_buff->data_byte[34];
+ hba[i]->firm_ver[3] = inq_buff->data_byte[35];
+ } else { /* send command failed */
+ printk(KERN_WARNING "cciss: unable to determine firmware"
+ " version of controller\n");
+ }
+
cciss_procinit(i);
hba[i]->cciss_max_sectors = 2048;
hba[i]->busy_initializing = 0;
- do {
- drive_info_struct *drv = &(hba[i]->drv[j]);
- struct gendisk *disk = hba[i]->gendisk[j];
- request_queue_t *q;
-
- /* Check if the disk was allocated already */
- if (!disk){
- hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
- disk = hba[i]->gendisk[j];
- }
-
- /* Check that the disk was able to be allocated */
- if (!disk) {
- printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
- goto clean4;
- }
-
- q = blk_init_queue(do_cciss_request, &hba[i]->lock);
- if (!q) {
- printk(KERN_ERR
- "cciss: unable to allocate queue for disk %d\n",
- j);
- goto clean4;
- }
- drv->queue = q;
-
- q->backing_dev_info.ra_pages = READ_AHEAD;
- blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
-
- /* This is a hardware imposed limit. */
- blk_queue_max_hw_segments(q, MAXSGENTRIES);
-
- /* This is a limit in the driver and could be eliminated. */
- blk_queue_max_phys_segments(q, MAXSGENTRIES);
-
- blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
-
- blk_queue_softirq_done(q, cciss_softirq_done);
-
- q->queuedata = hba[i];
- sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
- disk->major = hba[i]->major;
- disk->first_minor = j << NWD_SHIFT;
- disk->fops = &cciss_fops;
- disk->queue = q;
- disk->private_data = drv;
- disk->driverfs_dev = &pdev->dev;
- /* we must register the controller even if no disks exist */
- /* this is for the online array utilities */
- if (!drv->heads && j)
- continue;
- blk_queue_hardsect_size(q, drv->block_size);
- set_capacity(disk, drv->nr_blocks);
- add_disk(disk);
- j++;
- } while (j <= hba[i]->highest_lun);
+ rebuild_lun_table(hba[i], 1);
+ hba[i]->cciss_scan_thread = kthread_run(scan_thread, hba[i],
+ "cciss_scan%02d", i);
+ if (IS_ERR(hba[i]->cciss_scan_thread))
+ return PTR_ERR(hba[i]->cciss_scan_thread);
return 1;
- clean4:
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
+clean4:
+ kfree(inq_buff);
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
hba[i]->errinfo_pool,
hba[i]->errinfo_pool_dhandle);
free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
- clean2:
+clean2:
unregister_blkdev(hba[i]->major, hba[i]->devname);
- clean1:
+clean1:
+ cciss_destroy_hba_sysfs_entry(hba[i]);
+clean0:
hba[i]->busy_initializing = 0;
/* cleanup any queues that may have been initialized */
for (j=0; j <= hba[i]->highest_lun; j++){
return -1;
}
-static void __devexit cciss_remove_one(struct pci_dev *pdev)
+static void cciss_shutdown(struct pci_dev *pdev)
{
ctlr_info_t *tmp_ptr;
- int i, j;
+ int i;
char flush_buf[4];
int return_code;
+ tmp_ptr = pci_get_drvdata(pdev);
+ if (tmp_ptr == NULL)
+ return;
+ i = tmp_ptr->ctlr;
+ if (hba[i] == NULL)
+ return;
+
+ /* Turn board interrupts off and send the flush cache command */
+ /* sendcmd will turn off interrupt, and send the flush...
+ * To write all data in the battery backed cache to disks */
+ memset(flush_buf, 0, 4);
+ return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0,
+ CTLR_LUNID, TYPE_CMD);
+ if (return_code == IO_OK) {
+ printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
+ } else {
+ printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
+ }
+ free_irq(hba[i]->intr[2], hba[i]);
+}
+
+static void __devexit cciss_remove_one(struct pci_dev *pdev)
+{
+ ctlr_info_t *tmp_ptr;
+ int i, j;
+
if (pci_get_drvdata(pdev) == NULL) {
printk(KERN_ERR "cciss: Unable to remove device \n");
return;
}
+
tmp_ptr = pci_get_drvdata(pdev);
i = tmp_ptr->ctlr;
if (hba[i] == NULL) {
"already be removed \n");
return;
}
- /* Turn board interrupts off and send the flush cache command */
- /* sendcmd will turn off interrupt, and send the flush...
- * To write all data in the battery backed cache to disks */
- memset(flush_buf, 0, 4);
- return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
- TYPE_CMD);
- if (return_code != IO_OK) {
- printk(KERN_WARNING "Error Flushing cache on controller %d\n",
- i);
- }
- free_irq(hba[i]->intr[2], hba[i]);
-#ifdef CONFIG_PCI_MSI
- if (hba[i]->msix_vector)
- pci_disable_msix(hba[i]->pdev);
- else if (hba[i]->msi_vector)
- pci_disable_msi(hba[i]->pdev);
-#endif /* CONFIG_PCI_MSI */
+ kthread_stop(hba[i]->cciss_scan_thread);
- iounmap(hba[i]->vaddr);
- cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
- unregister_blkdev(hba[i]->major, hba[i]->devname);
remove_proc_entry(hba[i]->devname, proc_cciss);
+ unregister_blkdev(hba[i]->major, hba[i]->devname);
/* remove it from the disk list */
for (j = 0; j < CISS_MAX_LUN; j++) {
struct gendisk *disk = hba[i]->gendisk[j];
if (disk) {
- request_queue_t *q = disk->queue;
+ struct request_queue *q = disk->queue;
if (disk->flags & GENHD_FL_UP)
del_gendisk(disk);
}
}
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
+#endif
+
+ cciss_shutdown(pdev);
+
+#ifdef CONFIG_PCI_MSI
+ if (hba[i]->msix_vector)
+ pci_disable_msix(hba[i]->pdev);
+ else if (hba[i]->msi_vector)
+ pci_disable_msi(hba[i]->pdev);
+#endif /* CONFIG_PCI_MSI */
+
+ iounmap(hba[i]->vaddr);
+
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
+ cciss_destroy_hba_sysfs_entry(hba[i]);
free_hba(i);
}
.probe = cciss_init_one,
.remove = __devexit_p(cciss_remove_one),
.id_table = cciss_pci_device_id, /* id_table */
+ .shutdown = cciss_shutdown,
};
/*
*/
static int __init cciss_init(void)
{
+ int err;
+
+ /*
+ * The hardware requires that commands are aligned on a 64-bit
+ * boundary. Given that we use pci_alloc_consistent() to allocate an
+ * array of them, the size must be a multiple of 8 bytes.
+ */
+ BUILD_BUG_ON(sizeof(CommandList_struct) % 8);
+
printk(KERN_INFO DRIVER_NAME "\n");
+ err = bus_register(&cciss_bus_type);
+ if (err)
+ return err;
+
/* Register for our PCI devices */
- return pci_register_driver(&cciss_pci_driver);
+ err = pci_register_driver(&cciss_pci_driver);
+ if (err)
+ goto err_bus_register;
+
+ return 0;
+
+err_bus_register:
+ bus_unregister(&cciss_bus_type);
+ return err;
}
static void __exit cciss_cleanup(void)
cciss_remove_one(hba[i]->pdev);
}
}
- remove_proc_entry("cciss", proc_root_driver);
+ remove_proc_entry("driver/cciss", NULL);
+ bus_unregister(&cciss_bus_type);
}
static void fail_all_cmds(unsigned long ctlr)
pci_disable_device(h->pdev); /* Make sure it is really dead. */
/* move everything off the request queue onto the completed queue */
- while ((c = h->reqQ) != NULL) {
- removeQ(&(h->reqQ), c);
+ while (!hlist_empty(&h->reqQ)) {
+ c = hlist_entry(h->reqQ.first, CommandList_struct, list);
+ removeQ(c);
h->Qdepth--;
- addQ(&(h->cmpQ), c);
+ addQ(&h->cmpQ, c);
}
/* Now, fail everything on the completed queue with a HW error */
- while ((c = h->cmpQ) != NULL) {
- removeQ(&h->cmpQ, c);
+ while (!hlist_empty(&h->cmpQ)) {
+ c = hlist_entry(h->cmpQ.first, CommandList_struct, list);
+ removeQ(c);
c->err_info->CommandStatus = CMD_HARDWARE_ERR;
if (c->cmd_type == CMD_RWREQ) {
complete_command(h, c, 0);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff