#include <linux/workqueue.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
+#include <linux/async.h>
+#include <linux/log2.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
unsigned long xfer_mask;
unsigned int horkage_on;
unsigned int horkage_off;
+ unsigned int lflags;
};
struct ata_force_ent {
static int atapi_enabled = 1;
module_param(atapi_enabled, int, 0444);
-MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
static int atapi_dmadir = 0;
module_param(atapi_dmadir, int, 0444);
-MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
int atapi_passthru16 = 1;
module_param(atapi_passthru16, int, 0444);
-MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
-MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
static int ata_ignore_hpa;
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
int libata_noacpi = 0;
module_param_named(noacpi, libata_noacpi, int, 0444);
-MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
-MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_VERSION(DRV_VERSION);
+static bool ata_sstatus_online(u32 sstatus)
+{
+ return (sstatus & 0xf) == 0x3;
+}
+
+/**
+ * ata_link_next - link iteration helper
+ * @link: the previous link, NULL to start
+ * @ap: ATA port containing links to iterate
+ * @mode: iteration mode, one of ATA_LITER_*
+ *
+ * LOCKING:
+ * Host lock or EH context.
+ *
+ * RETURNS:
+ * Pointer to the next link.
+ */
+struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
+ enum ata_link_iter_mode mode)
+{
+ BUG_ON(mode != ATA_LITER_EDGE &&
+ mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
+
+ /* NULL link indicates start of iteration */
+ if (!link)
+ switch (mode) {
+ case ATA_LITER_EDGE:
+ case ATA_LITER_PMP_FIRST:
+ if (sata_pmp_attached(ap))
+ return ap->pmp_link;
+ /* fall through */
+ case ATA_LITER_HOST_FIRST:
+ return &ap->link;
+ }
+
+ /* we just iterated over the host link, what's next? */
+ if (link == &ap->link)
+ switch (mode) {
+ case ATA_LITER_HOST_FIRST:
+ if (sata_pmp_attached(ap))
+ return ap->pmp_link;
+ /* fall through */
+ case ATA_LITER_PMP_FIRST:
+ if (unlikely(ap->slave_link))
+ return ap->slave_link;
+ /* fall through */
+ case ATA_LITER_EDGE:
+ return NULL;
+ }
+
+ /* slave_link excludes PMP */
+ if (unlikely(link == ap->slave_link))
+ return NULL;
+
+ /* we were over a PMP link */
+ if (++link < ap->pmp_link + ap->nr_pmp_links)
+ return link;
+
+ if (mode == ATA_LITER_PMP_FIRST)
+ return &ap->link;
+
+ return NULL;
+}
+
+/**
+ * ata_dev_next - device iteration helper
+ * @dev: the previous device, NULL to start
+ * @link: ATA link containing devices to iterate
+ * @mode: iteration mode, one of ATA_DITER_*
+ *
+ * LOCKING:
+ * Host lock or EH context.
+ *
+ * RETURNS:
+ * Pointer to the next device.
+ */
+struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
+ enum ata_dev_iter_mode mode)
+{
+ BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
+ mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
+
+ /* NULL dev indicates start of iteration */
+ if (!dev)
+ switch (mode) {
+ case ATA_DITER_ENABLED:
+ case ATA_DITER_ALL:
+ dev = link->device;
+ goto check;
+ case ATA_DITER_ENABLED_REVERSE:
+ case ATA_DITER_ALL_REVERSE:
+ dev = link->device + ata_link_max_devices(link) - 1;
+ goto check;
+ }
+
+ next:
+ /* move to the next one */
+ switch (mode) {
+ case ATA_DITER_ENABLED:
+ case ATA_DITER_ALL:
+ if (++dev < link->device + ata_link_max_devices(link))
+ goto check;
+ return NULL;
+ case ATA_DITER_ENABLED_REVERSE:
+ case ATA_DITER_ALL_REVERSE:
+ if (--dev >= link->device)
+ goto check;
+ return NULL;
+ }
+
+ check:
+ if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
+ !ata_dev_enabled(dev))
+ goto next;
+ return dev;
+}
+
+/**
+ * ata_dev_phys_link - find physical link for a device
+ * @dev: ATA device to look up physical link for
+ *
+ * Look up physical link which @dev is attached to. Note that
+ * this is different from @dev->link only when @dev is on slave
+ * link. For all other cases, it's the same as @dev->link.
+ *
+ * LOCKING:
+ * Don't care.
+ *
+ * RETURNS:
+ * Pointer to the found physical link.
+ */
+struct ata_link *ata_dev_phys_link(struct ata_device *dev)
+{
+ struct ata_port *ap = dev->link->ap;
+
+ if (!ap->slave_link)
+ return dev->link;
+ if (!dev->devno)
+ return &ap->link;
+ return ap->slave_link;
+}
+
/**
* ata_force_cbl - force cable type according to libata.force
* @ap: ATA port of interest
}
/**
- * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * ata_force_link_limits - force link limits according to libata.force
* @link: ATA link of interest
*
- * Force SATA spd limit according to libata.force and whine about
- * it. When only the port part is specified (e.g. 1:), the limit
- * applies to all links connected to both the host link and all
- * fan-out ports connected via PMP. If the device part is
- * specified as 0 (e.g. 1.00:), it specifies the first fan-out
- * link not the host link. Device number 15 always points to the
- * host link whether PMP is attached or not.
+ * Force link flags and SATA spd limit according to libata.force
+ * and whine about it. When only the port part is specified
+ * (e.g. 1:), the limit applies to all links connected to both
+ * the host link and all fan-out ports connected via PMP. If the
+ * device part is specified as 0 (e.g. 1.00:), it specifies the
+ * first fan-out link not the host link. Device number 15 always
+ * points to the host link whether PMP is attached or not. If the
+ * controller has slave link, device number 16 points to it.
*
* LOCKING:
* EH context.
*/
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
{
- int linkno, i;
+ bool did_spd = false;
+ int linkno = link->pmp;
+ int i;
if (ata_is_host_link(link))
- linkno = 15;
- else
- linkno = link->pmp;
+ linkno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (fe->device != -1 && fe->device != linkno)
continue;
- if (!fe->param.spd_limit)
- continue;
+ /* only honor the first spd limit */
+ if (!did_spd && fe->param.spd_limit) {
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n",
+ fe->param.name);
+ did_spd = true;
+ }
- link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
- ata_link_printk(link, KERN_NOTICE,
- "FORCE: PHY spd limit set to %s\n", fe->param.name);
- return;
+ /* let lflags stack */
+ if (fe->param.lflags) {
+ link->flags |= fe->param.lflags;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: link flag 0x%x forced -> 0x%x\n",
+ fe->param.lflags, link->flags);
+ }
}
}
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
int alt_devno = devno;
int i;
- /* allow n.15 for the first device attached to host port */
- if (ata_is_host_link(dev->link) && devno == 0)
- alt_devno = 15;
+ /* allow n.15/16 for devices attached to host port */
+ if (ata_is_host_link(dev->link))
+ alt_devno += 15;
for (i = 0; i < ata_force_tbl_size; i++) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
- block |= tf->hob_lbal << 24;
+ block |= (u64)tf->hob_lbal << 24;
} else
block |= (tf->device & 0xf) << 24;
head = tf->device & 0xf;
sect = tf->lbal;
- block = (cyl * dev->heads + head) * dev->sectors + sect;
+ if (!sect) {
+ ata_dev_printk(dev, KERN_WARNING, "device reported "
+ "invalid CHS sector 0\n");
+ sect = 1; /* oh well */
+ }
+
+ block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
}
return block;
static const char * const spd_str[] = {
"1.5 Gbps",
"3.0 Gbps",
+ "6.0 Gbps",
};
if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
return spd_str[spd - 1];
}
-void ata_dev_disable(struct ata_device *dev)
-{
- if (ata_dev_enabled(dev)) {
- if (ata_msg_drv(dev->link->ap))
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
- ata_acpi_on_disable(dev);
- ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
- ATA_DNXFER_QUIET);
- dev->class++;
- }
-}
-
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
struct ata_link *link = dev->link;
for (i = 0; i < host->n_ports; i++) {
ap = host->ports[i];
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link)
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ALL)
ata_dev_disable_pm(dev);
}
}
*
* We follow the current spec and consider that 0x69/0x96
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+ * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+ * SEMB signature. This is worked around in
+ * ata_dev_read_id().
*/
if ((tf->lbam == 0) && (tf->lbah == 0)) {
DPRINTK("found ATA device by sig\n");
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
- printk(KERN_INFO "ata: SEMB device ignored\n");
- return ATA_DEV_SEMB_UNSUP; /* not yet */
+ DPRINTK("found SEMB device by sig (could be ATA device)\n");
+ return ATA_DEV_SEMB;
}
DPRINTK("unknown device\n");
{
unsigned int c;
+ BUG_ON(len & 1);
+
while (len > 0) {
c = id[ofs] >> 8;
*s = c;
{
unsigned char *p;
- WARN_ON(!(len & 1));
-
ata_id_string(id, s, ofs, len - 1);
p = s + strnlen(s, len - 1);
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
- return ata_id_u64(id, 100);
+ return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
else
- return ata_id_u32(id, 60);
+ return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
if (ata_id_current_chs_valid(id))
- return ata_id_u32(id, 57);
+ return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+ id[ATA_ID_CUR_SECTORS];
else
- return id[1] * id[3] * id[6];
+ return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+ id[ATA_ID_SECTORS];
}
}
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
- sectors |= (tf->hob_lbal & 0xff) << 24;
+ sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
return rc;
}
+ dev->n_native_sectors = native_sectors;
/* nothing to do? */
if (native_sectors <= sectors || !ata_ignore_hpa) {
/*
* Process compact flash extended modes
*/
- int pio = id[163] & 0x7;
- int dma = (id[163] >> 3) & 7;
+ int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+ int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
if (pio)
pio_mask |= (1 << 5);
/**
* ata_pio_queue_task - Queue port_task
* @ap: The ata_port to queue port_task for
- * @fn: workqueue function to be scheduled
* @data: data for @fn to use
* @delay: delay time in msecs for workqueue function
*
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
-
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
- /* Controller doesn't support IORDY. Probably a pointless check
- as the caller should know this */
+ /* Don't set IORDY if we're preparing for reset. IORDY may
+ * lead to controller lock up on certain controllers if the
+ * port is not occupied. See bko#11703 for details.
+ */
+ if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+ return 0;
+ /* Controller doesn't support IORDY. Probably a pointless
+ * check as the caller should know this.
+ */
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
return 0;
+ /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
+ if (ata_id_is_cfa(adev->id)
+ && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
+ return 0;
/* PIO3 and higher it is mandatory */
if (adev->pio_mode > XFER_PIO_2)
return 1;
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
-
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
/* If we have no drive specific rule, then PIO 2 is non IORDY */
}
/**
+ * ata_do_dev_read_id - default ID read method
+ * @dev: device
+ * @tf: proposed taskfile
+ * @id: data buffer
+ *
+ * Issue the identify taskfile and hand back the buffer containing
+ * identify data. For some RAID controllers and for pre ATA devices
+ * this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+ id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
+/**
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
struct ata_taskfile tf;
unsigned int err_mask = 0;
const char *reason;
+ bool is_semb = class == ATA_DEV_SEMB;
int may_fallback = 1, tried_spinup = 0;
int rc;
if (ata_msg_ctl(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
- retry:
+retry:
ata_tf_init(dev, &tf);
switch (class) {
+ case ATA_DEV_SEMB:
+ class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
case ATA_DEV_ATA:
tf.command = ATA_CMD_ID_ATA;
break;
*/
tf.flags |= ATA_TFLAG_POLLING;
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
- id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+ if (ap->ops->read_id)
+ err_mask = ap->ops->read_id(dev, &tf, id);
+ else
+ err_mask = ata_do_dev_read_id(dev, &tf, id);
+
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
ata_dev_printk(dev, KERN_DEBUG,
return -ENOENT;
}
+ if (is_semb) {
+ ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+ "device w/ SEMB sig, disabled\n");
+ /* SEMB is not supported yet */
+ *p_class = ATA_DEV_SEMB_UNSUP;
+ return 0;
+ }
+
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
* Some drives were very specific about that exact sequence.
*
* Note that ATA4 says lba is mandatory so the second check
- * shoud never trigger.
+ * should never trigger.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
err_mask = ata_dev_init_params(dev, id[3], id[6]);
return rc;
}
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+ struct ata_link *plink = ata_dev_phys_link(dev);
+ u32 target, target_limit;
+
+ if (!sata_scr_valid(plink))
+ return 0;
+
+ if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+ target = 1;
+ else
+ return 0;
+
+ target_limit = (1 << target) - 1;
+
+ /* if already on stricter limit, no need to push further */
+ if (plink->sata_spd_limit <= target_limit)
+ return 0;
+
+ plink->sata_spd_limit = target_limit;
+
+ /* Request another EH round by returning -EAGAIN if link is
+ * going faster than the target speed. Forward progress is
+ * guaranteed by setting sata_spd_limit to target_limit above.
+ */
+ if (plink->sata_spd > target) {
+ ata_dev_printk(dev, KERN_INFO,
+ "applying link speed limit horkage to %s\n",
+ sata_spd_string(target));
+ return -EAGAIN;
+ }
+ return 0;
+}
+
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
+
+ if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
+ return 0;
+
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
-static void ata_dev_config_ncq(struct ata_device *dev,
+static int ata_dev_config_ncq(struct ata_device *dev,
char *desc, size_t desc_sz)
{
struct ata_port *ap = dev->link->ap;
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
+ unsigned int err_mask;
+ char *aa_desc = "";
if (!ata_id_has_ncq(dev->id)) {
desc[0] = '\0';
- return;
+ return 0;
}
if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
- return;
+ return 0;
}
if (ap->flags & ATA_FLAG_NCQ) {
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
dev->flags |= ATA_DFLAG_NCQ;
}
+ if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
+ (ap->flags & ATA_FLAG_FPDMA_AA) &&
+ ata_id_has_fpdma_aa(dev->id)) {
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
+ SATA_FPDMA_AA);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
+ "(error_mask=0x%x)\n", err_mask);
+ if (err_mask != AC_ERR_DEV) {
+ dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
+ return -EIO;
+ }
+ } else
+ aa_desc = ", AA";
+ }
+
if (hdepth >= ddepth)
- snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
else
- snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
+ ddepth, aa_desc);
+ return 0;
}
/**
return 0;
}
+ rc = ata_do_link_spd_horkage(dev);
+ if (rc)
+ return rc;
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
dev->cylinders = 0;
dev->heads = 0;
dev->sectors = 0;
+ dev->multi_count = 0;
/*
* common ATA, ATAPI feature tests
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
- if (id[162] & 1) /* CPRM may make this media unusable */
+ /* CPRM may make this media unusable */
+ if (id[ATA_ID_CFA_KEY_MGMT] & 1)
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
dev->n_sectors = ata_id_n_sectors(id);
- if (dev->id[59] & 0x100)
- dev->multi_count = dev->id[59] & 0xff;
+ /* get current R/W Multiple count setting */
+ if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
+ unsigned int max = dev->id[47] & 0xff;
+ unsigned int cnt = dev->id[59] & 0xff;
+ /* only recognize/allow powers of two here */
+ if (is_power_of_2(max) && is_power_of_2(cnt))
+ if (cnt <= max)
+ dev->multi_count = cnt;
+ }
if (ata_id_has_lba(id)) {
const char *lba_desc;
- char ncq_desc[20];
+ char ncq_desc[24];
lba_desc = "LBA";
dev->flags |= ATA_DFLAG_LBA;
}
/* config NCQ */
- ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ if (rc)
+ return rc;
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
}
}
+ if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+ "firmware update to be fully functional.\n");
+ ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
+ "or visit http://ata.wiki.kernel.org.\n");
+ }
+
return 0;
err_out_nosup:
ata_port_probe(ap);
- ata_link_for_each_dev(dev, &ap->link)
+ ata_for_each_dev(dev, &ap->link, ALL)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
retry:
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
/* If we issue an SRST then an ATA drive (not ATAPI)
* may change configuration and be in PIO0 timing. If
* we do a hard reset (or are coming from power on)
/* reset and determine device classes */
ap->ops->phy_reset(ap);
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL) {
if (!(ap->flags & ATA_FLAG_DISABLED) &&
dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
- ata_link_for_each_dev_reverse(dev, &ap->link) {
+ ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
if (tries[dev->devno])
dev->class = classes[dev->devno];
if (ap->ops->cable_detect)
ap->cbl = ap->ops->cable_detect(ap);
- /* We may have SATA bridge glue hiding here irrespective of the
- reported cable types and sensed types */
- ata_link_for_each_dev(dev, &ap->link) {
- if (!ata_dev_enabled(dev))
- continue;
- /* SATA drives indicate we have a bridge. We don't know which
- end of the link the bridge is which is a problem */
+ /* We may have SATA bridge glue hiding here irrespective of
+ * the reported cable types and sensed types. When SATA
+ * drives indicate we have a bridge, we don't know which end
+ * of the link the bridge is which is a problem.
+ */
+ ata_for_each_dev(dev, &ap->link, ENABLED)
if (ata_id_is_sata(dev->id))
ap->cbl = ATA_CBL_SATA;
- }
/* After the identify sequence we can now set up the devices. We do
this in the normal order so that the user doesn't get confused */
- ata_link_for_each_dev(dev, &ap->link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, &ap->link, ENABLED) {
ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
if (rc)
goto fail;
- ata_link_for_each_dev(dev, &ap->link)
- if (ata_dev_enabled(dev))
- return 0;
+ ata_for_each_dev(dev, &ap->link, ENABLED)
+ return 0;
/* no device present, disable port */
ata_port_disable(ap);
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(&ap->link);
+ sata_down_spd_limit(&ap->link, 0);
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
return;
sata_scr_read(link, SCR_CONTROL, &scontrol);
- if (ata_link_online(link)) {
+ if (ata_phys_link_online(link)) {
tmp = (sstatus >> 4) & 0xf;
ata_link_printk(link, KERN_INFO,
"SATA link up %s (SStatus %X SControl %X)\n",
/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
+ * @spd_limit: Additional limit
*
* Adjust SATA spd limit of @link downward. Note that this
* function only adjusts the limit. The change must be applied
* using sata_set_spd().
*
+ * If @spd_limit is non-zero, the speed is limited to equal to or
+ * lower than @spd_limit if such speed is supported. If
+ * @spd_limit is slower than any supported speed, only the lowest
+ * supported speed is allowed.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
{
u32 sstatus, spd, mask;
- int rc, highbit;
+ int rc, bit;
if (!sata_scr_valid(link))
return -EOPNOTSUPP;
* If not, use cached value in link->sata_spd.
*/
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
- if (rc == 0)
+ if (rc == 0 && ata_sstatus_online(sstatus))
spd = (sstatus >> 4) & 0xf;
else
spd = link->sata_spd;
return -EINVAL;
/* unconditionally mask off the highest bit */
- highbit = fls(mask) - 1;
- mask &= ~(1 << highbit);
+ bit = fls(mask) - 1;
+ mask &= ~(1 << bit);
/* Mask off all speeds higher than or equal to the current
* one. Force 1.5Gbps if current SPD is not available.
if (!mask)
return -EINVAL;
+ if (spd_limit) {
+ if (mask & ((1 << spd_limit) - 1))
+ mask &= (1 << spd_limit) - 1;
+ else {
+ bit = ffs(mask) - 1;
+ mask = 1 << bit;
+ }
+ }
+
link->sata_spd_limit = mask;
ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
*/
static const struct ata_timing ata_timing[] = {
-/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
-
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
-
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
-
-/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
+/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
+ { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
+ { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
+ { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
+ { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
+ { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
+ { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
+ { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
+
+ { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
+ { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
+ { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
+
+ { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
+ { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
+ { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
+ { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
+ { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
+
+/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
+ { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
+ { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
+ { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
+ { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
+ { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
+ { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
+ { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
{
- q->setup = EZ(t->setup * 1000, T);
- q->act8b = EZ(t->act8b * 1000, T);
- q->rec8b = EZ(t->rec8b * 1000, T);
- q->cyc8b = EZ(t->cyc8b * 1000, T);
- q->active = EZ(t->active * 1000, T);
- q->recover = EZ(t->recover * 1000, T);
- q->cycle = EZ(t->cycle * 1000, T);
- q->udma = EZ(t->udma * 1000, UT);
+ q->setup = EZ(t->setup * 1000, T);
+ q->act8b = EZ(t->act8b * 1000, T);
+ q->rec8b = EZ(t->rec8b * 1000, T);
+ q->cyc8b = EZ(t->cyc8b * 1000, T);
+ q->active = EZ(t->active * 1000, T);
+ q->recover = EZ(t->recover * 1000, T);
+ q->dmack_hold = EZ(t->dmack_hold * 1000, T);
+ q->cycle = EZ(t->cycle * 1000, T);
+ q->udma = EZ(t->udma * 1000, UT);
}
void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
+ if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing *t, int T, int UT)
{
+ const u16 *id = adev->id;
const struct ata_timing *s;
struct ata_timing p;
* PIO/MW_DMA cycle timing.
*/
- if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
+
if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
- if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
- else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
- } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
- p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
- }
+ if (speed <= XFER_PIO_2)
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+ else if ((speed <= XFER_PIO_4) ||
+ (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+ } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+ p.cycle = id[ATA_ID_EIDE_DMA_MIN];
+
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
}
static int ata_dev_set_mode(struct ata_device *dev)
{
+ struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &dev->link->eh_context;
+ const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
const char *dev_err_whine = "";
int ign_dev_err = 0;
- unsigned int err_mask;
+ unsigned int err_mask = 0;
int rc;
dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- err_mask = ata_dev_set_xfermode(dev);
+ if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+ dev_err_whine = " (SET_XFERMODE skipped)";
+ else {
+ if (nosetxfer)
+ ata_dev_printk(dev, KERN_WARNING,
+ "NOSETXFER but PATA detected - can't "
+ "skip SETXFER, might malfunction\n");
+ err_mask = ata_dev_set_xfermode(dev);
+ }
if (err_mask & ~AC_ERR_DEV)
goto fail;
int rc = 0, used_dma = 0, found = 0;
/* step 1: calculate xfer_mask */
- ata_link_for_each_dev(dev, link) {
+ ata_for_each_dev(dev, link, ENABLED) {
unsigned long pio_mask, dma_mask;
unsigned int mode_mask;
- if (!ata_dev_enabled(dev))
- continue;
-
mode_mask = ATA_DMA_MASK_ATA;
if (dev->class == ATA_DEV_ATAPI)
mode_mask = ATA_DMA_MASK_ATAPI;
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode != 0xff)
+ if (ata_dma_enabled(dev))
used_dma = 1;
}
if (!found)
goto out;
/* step 2: always set host PIO timings */
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
if (dev->pio_mode == 0xff) {
ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
rc = -EINVAL;
}
/* step 3: set host DMA timings */
- ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+ ata_for_each_dev(dev, link, ENABLED) {
+ if (!ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
}
/* step 4: update devices' xfer mode */
- ata_link_for_each_dev(dev, link) {
- /* don't update suspended devices' xfer mode */
- if (!ata_dev_enabled(dev))
- continue;
-
+ ata_for_each_dev(dev, link, ENABLED) {
rc = ata_dev_set_mode(dev);
if (rc)
goto out;
unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
int warned = 0;
+ /* Slave readiness can't be tested separately from master. On
+ * M/S emulation configuration, this function should be called
+ * only on the master and it will handle both master and slave.
+ */
+ WARN_ON(link == link->ap->slave_link);
+
if (time_after(nodev_deadline, deadline))
nodev_deadline = deadline;
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
+ int tries = ATA_LINK_RESUME_TRIES;
u32 scontrol, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x300;
+ /*
+ * Writes to SControl sometimes get ignored under certain
+ * controllers (ata_piix SIDPR). Make sure DET actually is
+ * cleared.
+ */
+ do {
+ scontrol = (scontrol & 0x0f0) | 0x300;
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ return rc;
+ /*
+ * Some PHYs react badly if SStatus is pounded
+ * immediately after resuming. Delay 200ms before
+ * debouncing.
+ */
+ msleep(200);
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- return rc;
+ /* is SControl restored correctly? */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+ } while ((scontrol & 0xf0f) != 0x300 && --tries);
- /* Some PHYs react badly if SStatus is pounded immediately
- * after resuming. Delay 200ms before debouncing.
- */
- msleep(200);
+ if ((scontrol & 0xf0f) != 0x300) {
+ ata_link_printk(link, KERN_ERR,
+ "failed to resume link (SControl %X)\n",
+ scontrol);
+ return 0;
+ }
+
+ if (tries < ATA_LINK_RESUME_TRIES)
+ ata_link_printk(link, KERN_WARNING,
+ "link resume succeeded after %d retries\n",
+ ATA_LINK_RESUME_TRIES - tries);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
}
/* no point in trying softreset on offline link */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
ehc->i.action &= ~ATA_EH_SOFTRESET;
return 0;
if (rc)
goto out;
/* if link is offline nothing more to do */
- if (ata_link_offline(link))
+ if (ata_phys_link_offline(link))
goto out;
/* Link is online. From this point, -ENODEV too is an error. */
unsigned int readid_flags)
{
u64 n_sectors = dev->n_sectors;
+ u64 n_native_sectors = dev->n_native_sectors;
int rc;
if (!ata_dev_enabled(dev))
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
- new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+ new_class != ATA_DEV_ATA &&
+ new_class != ATA_DEV_ATAPI &&
+ new_class != ATA_DEV_SEMB) {
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
/* verify n_sectors hasn't changed */
if (dev->class == ATA_DEV_ATA && n_sectors &&
dev->n_sectors != n_sectors) {
- ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+ ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
"%llu != %llu\n",
(unsigned long long)n_sectors,
(unsigned long long)dev->n_sectors);
-
- /* restore original n_sectors */
- dev->n_sectors = n_sectors;
-
- rc = -ENODEV;
- goto fail;
+ /*
+ * Something could have caused HPA to be unlocked
+ * involuntarily. If n_native_sectors hasn't changed
+ * and the new size matches it, keep the device.
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors > n_sectors &&
+ dev->n_sectors == n_native_sectors) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, continuing\n");
+ /* keep using the old n_sectors */
+ dev->n_sectors = n_sectors;
+ } else {
+ /* restore original n_[native]_sectors and fail */
+ dev->n_native_sectors = n_native_sectors;
+ dev->n_sectors = n_sectors;
+ rc = -ENODEV;
+ goto fail;
+ }
}
return 0;
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
+ { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
/* Devices we expect to fail diagnostics */
{ "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ { "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
+
+ /* Seagate NCQ + FLUSH CACHE firmware bug */
+ { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
+ /* this one allows HPA unlocking but fails IOs on the area */
+ { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
+
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
+ /* Devices that do not need bridging limits applied */
+ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+
+ /* Devices which aren't very happy with higher link speeds */
+ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+
+ /*
+ * Devices which choke on SETXFER. Applies only if both the
+ * device and controller are SATA.
+ */
+ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
+
/* End Marker */
{ }
};
struct ata_link *link;
struct ata_device *dev;
- /* If the controller thinks we are 40 wire, we are */
+ /* If the controller thinks we are 40 wire, we are. */
if (ap->cbl == ATA_CBL_PATA40)
return 1;
- /* If the controller thinks we are 80 wire, we are */
+
+ /* If the controller thinks we are 80 wire, we are. */
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
- /* If the system is known to be 40 wire short cable (eg laptop),
- then we allow 80 wire modes even if the drive isn't sure */
+
+ /* If the system is known to be 40 wire short cable (eg
+ * laptop), then we allow 80 wire modes even if the drive
+ * isn't sure.
+ */
if (ap->cbl == ATA_CBL_PATA40_SHORT)
return 0;
- /* If the controller doesn't know we scan
-
- - Note: We look for all 40 wire detects at this point.
- Any 80 wire detect is taken to be 80 wire cable
- because
- - In many setups only the one drive (slave if present)
- will give a valid detect
- - If you have a non detect capable drive you don't
- want it to colour the choice
- */
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link) {
+
+ /* If the controller doesn't know, we scan.
+ *
+ * Note: We look for all 40 wire detects at this point. Any
+ * 80 wire detect is taken to be 80 wire cable because
+ * - in many setups only the one drive (slave if present) will
+ * give a valid detect
+ * - if you have a non detect capable drive you don't want it
+ * to colour the choice
+ */
+ ata_for_each_link(link, ap, EDGE) {
+ ata_for_each_dev(dev, link, ENABLED) {
if (!ata_is_40wire(dev))
return 0;
}
struct scatterlist *sg = qc->sg;
int dir = qc->dma_dir;
- WARN_ON(sg == NULL);
+ WARN_ON_ONCE(sg == NULL);
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
if (qc->n_elem)
- dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
* few ATAPI devices choke on such DMA requests.
*/
- if (unlikely(qc->nbytes & 15))
+ if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
+ unlikely(qc->nbytes & 15))
return 1;
if (ap->ops->check_atapi_dma)
return -1;
DPRINTK("%d sg elements mapped\n", n_elem);
-
+ qc->orig_n_elem = qc->n_elem;
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
/**
* ata_qc_new - Request an available ATA command, for queueing
- * @ap: Port associated with device @dev
- * @dev: Device from whom we request an available command structure
+ * @ap: target port
*
* LOCKING:
* None.
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
+ struct ata_port *ap;
unsigned int tag;
- WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
qc->flags = 0;
tag = qc->tag;
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- struct ata_link *link = qc->dev->link;
+ struct ata_port *ap;
+ struct ata_link *link;
- WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
- WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @err_mask: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
struct ata_device *dev = qc->dev;
struct ata_eh_info *ehi = &dev->link->eh_info;
- WARN_ON(ap->pflags & ATA_PFLAG_FROZEN);
-
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- if (!ata_tag_internal(qc->tag)) {
- /* always fill result TF for failed qc */
- fill_result_tf(qc);
+ /* always fill result TF for failed qc */
+ fill_result_tf(qc);
+
+ if (!ata_tag_internal(qc->tag))
ata_qc_schedule_eh(qc);
- return;
- }
+ else
+ __ata_qc_complete(qc);
+ return;
}
+ WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
+
/* read result TF if requested */
if (qc->flags & ATA_QCFLAG_RESULT_TF)
fill_result_tf(qc);
{
int nr_done = 0;
u32 done_mask;
- int i;
done_mask = ap->qc_active ^ qc_active;
return -EINVAL;
}
- for (i = 0; i < ATA_MAX_QUEUE; i++) {
+ while (done_mask) {
struct ata_queued_cmd *qc;
+ unsigned int tag = __ffs(done_mask);
- if (!(done_mask & (1 << i)))
- continue;
-
- if ((qc = ata_qc_from_tag(ap, i))) {
+ qc = ata_qc_from_tag(ap, tag);
+ if (qc) {
ata_qc_complete(qc);
nr_done++;
}
+ done_mask &= ~(1 << tag);
}
return nr_done;
* check is skipped for old EH because it reuses active qc to
* request ATAPI sense.
*/
- WARN_ON(ap->ops->error_handler && ata_tag_valid(link->active_tag));
+ WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
if (ata_is_ncq(prot)) {
- WARN_ON(link->sactive & (1 << qc->tag));
+ WARN_ON_ONCE(link->sactive & (1 << qc->tag));
if (!link->sactive)
ap->nr_active_links++;
link->sactive |= 1 << qc->tag;
} else {
- WARN_ON(link->sactive);
+ WARN_ON_ONCE(link->sactive);
ap->nr_active_links++;
link->active_tag = qc->tag;
int sata_scr_read(struct ata_link *link, int reg, u32 *val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_read(ap, reg, val);
+ return link->ap->ops->scr_read(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
-
if (sata_scr_valid(link))
- return ap->ops->scr_write(ap, reg, val);
+ return link->ap->ops->scr_write(link, reg, val);
return -EOPNOTSUPP;
}
int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
{
if (ata_is_host_link(link)) {
- struct ata_port *ap = link->ap;
int rc;
if (sata_scr_valid(link)) {
- rc = ap->ops->scr_write(ap, reg, val);
+ rc = link->ap->ops->scr_write(link, reg, val);
if (rc == 0)
- rc = ap->ops->scr_read(ap, reg, &val);
+ rc = link->ap->ops->scr_read(link, reg, &val);
return rc;
}
return -EOPNOTSUPP;
}
/**
- * ata_link_online - test whether the given link is online
+ * ata_phys_link_online - test whether the given link is online
* @link: ATA link to test
*
* Test whether @link is online. Note that this function returns
* None.
*
* RETURNS:
- * 1 if the port online status is available and online.
+ * True if the port online status is available and online.
*/
-int ata_link_online(struct ata_link *link)
+bool ata_phys_link_online(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) == 0x3)
- return 1;
- return 0;
+ ata_sstatus_online(sstatus))
+ return true;
+ return false;
}
/**
- * ata_link_offline - test whether the given link is offline
+ * ata_phys_link_offline - test whether the given link is offline
* @link: ATA link to test
*
* Test whether @link is offline. Note that this function
* None.
*
* RETURNS:
- * 1 if the port offline status is available and offline.
+ * True if the port offline status is available and offline.
*/
-int ata_link_offline(struct ata_link *link)
+bool ata_phys_link_offline(struct ata_link *link)
{
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) != 0x3)
- return 1;
- return 0;
+ !ata_sstatus_online(sstatus))
+ return true;
+ return false;
+}
+
+/**
+ * ata_link_online - test whether the given link is online
+ * @link: ATA link to test
+ *
+ * Test whether @link is online. This is identical to
+ * ata_phys_link_online() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if any of M/S links is
+ * online.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port online status is available and online.
+ */
+bool ata_link_online(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_online(link) ||
+ (slave && ata_phys_link_online(slave));
+}
+
+/**
+ * ata_link_offline - test whether the given link is offline
+ * @link: ATA link to test
+ *
+ * Test whether @link is offline. This is identical to
+ * ata_phys_link_offline() when there's no slave link. When
+ * there's a slave link, this function should only be called on
+ * the master link and will return true if both M/S links are
+ * offline.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * True if the port offline status is available and offline.
+ */
+bool ata_link_offline(struct ata_link *link)
+{
+ struct ata_link *slave = link->ap->slave_link;
+
+ WARN_ON(link == slave); /* shouldn't be called on slave link */
+
+ return ata_phys_link_offline(link) &&
+ (!slave || ata_phys_link_offline(slave));
}
#ifdef CONFIG_PM
}
ap->pflags |= ATA_PFLAG_PM_PENDING;
- __ata_port_for_each_link(link, ap) {
+ ata_for_each_link(link, ap, HOST_FIRST) {
link->eh_info.action |= action;
link->eh_info.flags |= ehi_flags;
}
*/
void ata_dev_init(struct ata_device *dev)
{
- struct ata_link *link = dev->link;
+ struct ata_link *link = ata_dev_phys_link(dev);
struct ata_port *ap = link->ap;
unsigned long flags;
- /* SATA spd limit is bound to the first device */
+ /* SATA spd limit is bound to the attached device, reset together */
link->sata_spd_limit = link->hw_sata_spd_limit;
link->sata_spd = 0;
dev->horkage = 0;
spin_unlock_irqrestore(ap->lock, flags);
- memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
- sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+ memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+ ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
dev->link = link;
dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+ dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
ata_dev_init(dev);
}
}
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol;
u8 spd;
int rc;
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
- spd = (scontrol >> 4) & 0xf;
+ spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
- ata_force_spd_limit(link);
+ ata_force_link_limits(link);
link->sata_spd_limit = link->hw_sata_spd_limit;
#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#else
+ INIT_DELAYED_WORK(&ap->port_task, NULL);
#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
init_waitqueue_head(&ap->eh_wait_q);
+ init_completion(&ap->park_req_pending);
init_timer_deferrable(&ap->fastdrain_timer);
ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
ap->fastdrain_timer.data = (unsigned long)ap;
scsi_host_put(ap->scsi_host);
kfree(ap->pmp_link);
+ kfree(ap->slave_link);
kfree(ap);
host->ports[i] = NULL;
}
return host;
}
+/**
+ * ata_slave_link_init - initialize slave link
+ * @ap: port to initialize slave link for
+ *
+ * Create and initialize slave link for @ap. This enables slave
+ * link handling on the port.
+ *
+ * In libata, a port contains links and a link contains devices.
+ * There is single host link but if a PMP is attached to it,
+ * there can be multiple fan-out links. On SATA, there's usually
+ * a single device connected to a link but PATA and SATA
+ * controllers emulating TF based interface can have two - master
+ * and slave.
+ *
+ * However, there are a few controllers which don't fit into this
+ * abstraction too well - SATA controllers which emulate TF
+ * interface with both master and slave devices but also have
+ * separate SCR register sets for each device. These controllers
+ * need separate links for physical link handling
+ * (e.g. onlineness, link speed) but should be treated like a
+ * traditional M/S controller for everything else (e.g. command
+ * issue, softreset).
+ *
+ * slave_link is libata's way of handling this class of
+ * controllers without impacting core layer too much. For
+ * anything other than physical link handling, the default host
+ * link is used for both master and slave. For physical link
+ * handling, separate @ap->slave_link is used. All dirty details
+ * are implemented inside libata core layer. From LLD's POV, the
+ * only difference is that prereset, hardreset and postreset are
+ * called once more for the slave link, so the reset sequence
+ * looks like the following.
+ *
+ * prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
+ * softreset(M) -> postreset(M) -> postreset(S)
+ *
+ * Note that softreset is called only for the master. Softreset
+ * resets both M/S by definition, so SRST on master should handle
+ * both (the standard method will work just fine).
+ *
+ * LOCKING:
+ * Should be called before host is registered.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_slave_link_init(struct ata_port *ap)
+{
+ struct ata_link *link;
+
+ WARN_ON(ap->slave_link);
+ WARN_ON(ap->flags & ATA_FLAG_PMP);
+
+ link = kzalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
+ ata_link_init(ap, link, 1);
+ ap->slave_link = link;
+ return 0;
+}
+
static void ata_host_stop(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
host->ops = ops;
}
+
+static void async_port_probe(void *data, async_cookie_t cookie)
+{
+ int rc;
+ struct ata_port *ap = data;
+
+ /*
+ * If we're not allowed to scan this host in parallel,
+ * we need to wait until all previous scans have completed
+ * before going further.
+ * Jeff Garzik says this is only within a controller, so we
+ * don't need to wait for port 0, only for later ports.
+ */
+ if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
+ async_synchronize_cookie(cookie);
+
+ /* probe */
+ if (ap->ops->error_handler) {
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ unsigned long flags;
+
+ ata_port_probe(ap);
+
+ /* kick EH for boot probing */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
+ ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+
+ ap->pflags &= ~ATA_PFLAG_INITIALIZING;
+ ap->pflags |= ATA_PFLAG_LOADING;
+ ata_port_schedule_eh(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* wait for EH to finish */
+ ata_port_wait_eh(ap);
+ } else {
+ DPRINTK("ata%u: bus probe begin\n", ap->print_id);
+ rc = ata_bus_probe(ap);
+ DPRINTK("ata%u: bus probe end\n", ap->print_id);
+
+ if (rc) {
+ /* FIXME: do something useful here?
+ * Current libata behavior will
+ * tear down everything when
+ * the module is removed
+ * or the h/w is unplugged.
+ */
+ }
+ }
+
+ /* in order to keep device order, we need to synchronize at this point */
+ async_synchronize_cookie(cookie);
+
+ ata_scsi_scan_host(ap, 1);
+
+}
/**
* ata_host_register - register initialized ATA host
* @host: ATA host to register
/* init sata_spd_limit to the current value */
sata_link_init_spd(&ap->link);
+ if (ap->slave_link)
+ sata_link_init_spd(ap->slave_link);
/* print per-port info to dmesg */
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ata_port_printk(ap, KERN_INFO, "DUMMY\n");
}
- /* perform each probe synchronously */
- DPRINTK("probe begin\n");
+ /* perform each probe asynchronously */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
-
- /* probe */
- if (ap->ops->error_handler) {
- struct ata_eh_info *ehi = &ap->link.eh_info;
- unsigned long flags;
-
- ata_port_probe(ap);
-
- /* kick EH for boot probing */
- spin_lock_irqsave(ap->lock, flags);
-
- ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
- ap->pflags &= ~ATA_PFLAG_INITIALIZING;
- ap->pflags |= ATA_PFLAG_LOADING;
- ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* wait for EH to finish */
- ata_port_wait_eh(ap);
- } else {
- DPRINTK("ata%u: bus probe begin\n", ap->print_id);
- rc = ata_bus_probe(ap);
- DPRINTK("ata%u: bus probe end\n", ap->print_id);
-
- if (rc) {
- /* FIXME: do something useful here?
- * Current libata behavior will
- * tear down everything when
- * the module is removed
- * or the h/w is unplugged.
- */
- }
- }
- }
-
- /* probes are done, now scan each port's disk(s) */
- DPRINTK("host probe begin\n");
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
- ata_scsi_scan_host(ap, 1);
+ async_schedule(async_port_probe, ap);
}
return 0;
static void ata_port_detach(struct ata_port *ap)
{
unsigned long flags;
- struct ata_link *link;
- struct ata_device *dev;
if (!ap->ops->error_handler)
goto skip_eh;
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_UNLOADING;
+ ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
+ /* wait till EH commits suicide */
ata_port_wait_eh(ap);
- /* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Disable all existing devices.
- */
- ata_port_for_each_link(link, ap) {
- ata_link_for_each_dev(dev, link)
- ata_dev_disable(dev);
- }
-
- /* Final freeze & EH. All in-flight commands are aborted. EH
- * will be skipped and retrials will be terminated with bad
- * target.
- */
- spin_lock_irqsave(ap->lock, flags);
- ata_port_freeze(ap); /* won't be thawed */
- spin_unlock_irqrestore(ap->lock, flags);
+ /* it better be dead now */
+ WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
- ata_port_wait_eh(ap);
cancel_rearming_delayed_work(&ap->hotplug_task);
skip_eh:
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ { "nohrst", .lflags = ATA_LFLAG_NO_HRST },
+ { "nosrst", .lflags = ATA_LFLAG_NO_SRST },
+ { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
{
ata_parse_force_param();
+ /*
+ * FIXME: In UP case, there is only one workqueue thread and if you
+ * have more than one PIO device, latency is bloody awful, with
+ * occasional multi-second "hiccups" as one PIO device waits for
+ * another. It's an ugly wart that users DO occasionally complain
+ * about; luckily most users have at most one PIO polled device.
+ */
ata_wq = create_workqueue("ata");
if (!ata_wq)
- return -ENOMEM;
+ goto free_force_tbl;
ata_aux_wq = create_singlethread_workqueue("ata_aux");
- if (!ata_aux_wq) {
- destroy_workqueue(ata_wq);
- return -ENOMEM;
- }
+ if (!ata_aux_wq)
+ goto free_wq;
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
return 0;
+
+free_wq:
+ destroy_workqueue(ata_wq);
+free_force_tbl:
+ kfree(ata_force_tbl);
+ return -ENOMEM;
}
static void __exit ata_exit(void)
EXPORT_SYMBOL_GPL(sata_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
+EXPORT_SYMBOL_GPL(ata_link_next);
+EXPORT_SYMBOL_GPL(ata_dev_next);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
+EXPORT_SYMBOL_GPL(ata_slave_link_init);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_host_register);
EXPORT_SYMBOL_GPL(ata_host_activate);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
#endif /* CONFIG_PM */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_pio_queue_task);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff