#include <linux/io.h>
#include <linux/async.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/byteorder.h>
#include <linux/cdrom.h>
+#include <linux/ratelimit.h>
#include "libata.h"
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
unsigned int ata_print_id = 1;
-static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
+static int atapi_an;
+module_param(atapi_an, int, 0444);
+MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
head = tf->device & 0xf;
sect = tf->lbal;
- block = (cyl * dev->heads + head) * dev->sectors + sect;
+ if (!sect) {
+ ata_dev_printk(dev, KERN_WARNING, "device reported "
+ "invalid CHS sector 0\n");
+ sect = 1; /* oh well */
+ }
+
+ block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
}
return block;
{
struct ata_eh_context *ehc = &dev->link->eh_context;
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+ bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
u64 sectors = ata_id_n_sectors(dev->id);
u64 native_sectors;
int rc;
/* If device aborted the command or HPA isn't going to
* be unlocked, skip HPA resizing.
*/
- if (rc == -EACCES || !ata_ignore_hpa) {
+ if (rc == -EACCES || !unlock_hpa) {
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
"broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
return rc;
}
+ dev->n_native_sectors = native_sectors;
/* nothing to do? */
- if (native_sectors <= sectors || !ata_ignore_hpa) {
+ if (native_sectors <= sectors || !unlock_hpa) {
if (!print_info || native_sectors == sectors)
return 0;
return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
}
-/**
- * ata_pio_queue_task - Queue port_task
- * @ap: The ata_port to queue port_task for
- * @data: data for @fn to use
- * @delay: delay time in msecs for workqueue function
- *
- * Schedule @fn(@data) for execution after @delay jiffies using
- * port_task. There is one port_task per port and it's the
- * user(low level driver)'s responsibility to make sure that only
- * one task is active at any given time.
- *
- * libata core layer takes care of synchronization between
- * port_task and EH. ata_pio_queue_task() may be ignored for EH
- * synchronization.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
-{
- ap->port_task_data = data;
-
- /* may fail if ata_port_flush_task() in progress */
- queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
-}
-
-/**
- * ata_port_flush_task - Flush port_task
- * @ap: The ata_port to flush port_task for
- *
- * After this function completes, port_task is guranteed not to
- * be running or scheduled.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_port_flush_task(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- cancel_rearming_delayed_work(&ap->port_task);
-
- if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
-}
-
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
{
struct completion *waiting = qc->private_data;
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
- ata_port_flush_task(ap);
+ ata_sff_flush_pio_task(ap);
if (!rc) {
spin_lock_irqsave(ap->lock, flags);
ap->qc_active = preempted_qc_active;
ap->nr_active_links = preempted_nr_active_links;
- /* XXX - Some LLDDs (sata_mv) disable port on command failure.
- * Until those drivers are fixed, we detect the condition
- * here, fail the command with AC_ERR_SYSTEM and reenable the
- * port.
- *
- * Note that this doesn't change any behavior as internal
- * command failure results in disabling the device in the
- * higher layer for LLDDs without new reset/EH callbacks.
- *
- * Kill the following code as soon as those drivers are fixed.
- */
- if (ap->flags & ATA_FLAG_DISABLED) {
- err_mask |= AC_ERR_SYSTEM;
- ata_port_probe(ap);
- }
-
spin_unlock_irqrestore(ap->lock, flags);
if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
-
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
- /* Controller doesn't support IORDY. Probably a pointless check
- as the caller should know this */
+ /* Don't set IORDY if we're preparing for reset. IORDY may
+ * lead to controller lock up on certain controllers if the
+ * port is not occupied. See bko#11703 for details.
+ */
+ if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+ return 0;
+ /* Controller doesn't support IORDY. Probably a pointless
+ * check as the caller should know this.
+ */
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
return 0;
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
-
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
/* If we have no drive specific rule, then PIO 2 is non IORDY */
goto err_out;
}
+ if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
+ ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
+ "class=%d may_fallback=%d tried_spinup=%d\n",
+ class, may_fallback, tried_spinup);
+ print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+ 16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
+ }
+
/* Falling back doesn't make sense if ID data was read
* successfully at least once.
*/
* Some drives were very specific about that exact sequence.
*
* Note that ATA4 says lba is mandatory so the second check
- * shoud never trigger.
+ * should never trigger.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
err_mask = ata_dev_init_params(dev, id[3], id[6]);
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
-static void ata_dev_config_ncq(struct ata_device *dev,
+static int ata_dev_config_ncq(struct ata_device *dev,
char *desc, size_t desc_sz)
{
struct ata_port *ap = dev->link->ap;
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
+ unsigned int err_mask;
+ char *aa_desc = "";
if (!ata_id_has_ncq(dev->id)) {
desc[0] = '\0';
- return;
+ return 0;
}
if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
- return;
+ return 0;
}
if (ap->flags & ATA_FLAG_NCQ) {
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
dev->flags |= ATA_DFLAG_NCQ;
}
+ if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
+ (ap->flags & ATA_FLAG_FPDMA_AA) &&
+ ata_id_has_fpdma_aa(dev->id)) {
+ err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
+ SATA_FPDMA_AA);
+ if (err_mask) {
+ ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
+ "(error_mask=0x%x)\n", err_mask);
+ if (err_mask != AC_ERR_DEV) {
+ dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
+ return -EIO;
+ }
+ } else
+ aa_desc = ", AA";
+ }
+
if (hdepth >= ddepth)
- snprintf(desc, desc_sz, "NCQ (depth %d)", ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
else
- snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
+ snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
+ ddepth, aa_desc);
+ return 0;
}
/**
if (ata_id_has_lba(id)) {
const char *lba_desc;
- char ncq_desc[20];
+ char ncq_desc[24];
lba_desc = "LBA";
dev->flags |= ATA_DFLAG_LBA;
}
/* config NCQ */
- ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
+ if (rc)
+ return rc;
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
* to enable ATAPI AN to discern between PHY status
* changed notifications and ATAPI ANs.
*/
- if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
+ if (atapi_an &&
+ (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
(!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
int rc;
struct ata_device *dev;
- ata_port_probe(ap);
-
ata_for_each_dev(dev, &ap->link, ALL)
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
ap->ops->phy_reset(ap);
ata_for_each_dev(dev, &ap->link, ALL) {
- if (!(ap->flags & ATA_FLAG_DISABLED) &&
- dev->class != ATA_DEV_UNKNOWN)
+ if (dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
else
classes[dev->devno] = ATA_DEV_NONE;
dev->class = ATA_DEV_UNKNOWN;
}
- ata_port_probe(ap);
-
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
ata_for_each_dev(dev, &ap->link, ENABLED)
return 0;
- /* no device present, disable port */
- ata_port_disable(ap);
return -ENODEV;
fail:
}
/**
- * ata_port_probe - Mark port as enabled
- * @ap: Port for which we indicate enablement
- *
- * Modify @ap data structure such that the system
- * thinks that the entire port is enabled.
- *
- * LOCKING: host lock, or some other form of
- * serialization.
- */
-
-void ata_port_probe(struct ata_port *ap)
-{
- ap->flags &= ~ATA_FLAG_DISABLED;
-}
-
-/**
* sata_print_link_status - Print SATA link status
* @link: SATA link to printk link status about
*
}
/**
- * ata_port_disable - Disable port.
- * @ap: Port to be disabled.
- *
- * Modify @ap data structure such that the system
- * thinks that the entire port is disabled, and should
- * never attempt to probe or communicate with devices
- * on this port.
- *
- * LOCKING: host lock, or some other form of
- * serialization.
- */
-
-void ata_port_disable(struct ata_port *ap)
-{
- ap->link.device[0].class = ATA_DEV_NONE;
- ap->link.device[1].class = ATA_DEV_NONE;
- ap->flags |= ATA_FLAG_DISABLED;
-}
-
-/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
* @spd_limit: Additional limit
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing *t, int T, int UT)
{
+ const u16 *id = adev->id;
const struct ata_timing *s;
struct ata_timing p;
* PIO/MW_DMA cycle timing.
*/
- if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
+ if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
+
if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
- if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
- else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
- } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
- p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
- }
+ if (speed <= XFER_PIO_2)
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
+ else if ((speed <= XFER_PIO_4) ||
+ (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
+ p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
+ } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
+ p.cycle = id[ATA_ID_EIDE_DMA_MIN];
+
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
}
static int ata_dev_set_mode(struct ata_device *dev)
{
+ struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &dev->link->eh_context;
+ const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
const char *dev_err_whine = "";
int ign_dev_err = 0;
- unsigned int err_mask;
+ unsigned int err_mask = 0;
int rc;
dev->flags &= ~ATA_DFLAG_PIO;
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- err_mask = ata_dev_set_xfermode(dev);
+ if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+ dev_err_whine = " (SET_XFERMODE skipped)";
+ else {
+ if (nosetxfer)
+ ata_dev_printk(dev, KERN_WARNING,
+ "NOSETXFER but PATA detected - can't "
+ "skip SETXFER, might malfunction\n");
+ err_mask = ata_dev_set_xfermode(dev);
+ }
if (err_mask & ~AC_ERR_DEV)
goto fail;
int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
- unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+ unsigned long nodev_deadline;
int warned = 0;
+ /* choose which 0xff timeout to use, read comment in libata.h */
+ if (link->ap->host->flags & ATA_HOST_PARALLEL_SCAN)
+ nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT_LONG);
+ else
+ nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
+
/* Slave readiness can't be tested separately from master. On
* M/S emulation configuration, this function should be called
* only on the master and it will handle both master and slave.
if (ready > 0)
return 0;
- /* -ENODEV could be transient. Ignore -ENODEV if link
+ /*
+ * -ENODEV could be transient. Ignore -ENODEV if link
* is online. Also, some SATA devices take a long
- * time to clear 0xff after reset. For example,
- * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
- * GoVault needs even more than that. Wait for
- * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+ * time to clear 0xff after reset. Wait for
+ * ATA_TMOUT_FF_WAIT[_LONG] on -ENODEV if link isn't
+ * offline.
*
* Note that some PATA controllers (pata_ali) explode
* if status register is read more than once when
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
+ int tries = ATA_LINK_RESUME_TRIES;
u32 scontrol, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
return rc;
- scontrol = (scontrol & 0x0f0) | 0x300;
+ /*
+ * Writes to SControl sometimes get ignored under certain
+ * controllers (ata_piix SIDPR). Make sure DET actually is
+ * cleared.
+ */
+ do {
+ scontrol = (scontrol & 0x0f0) | 0x300;
+ if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
+ return rc;
+ /*
+ * Some PHYs react badly if SStatus is pounded
+ * immediately after resuming. Delay 200ms before
+ * debouncing.
+ */
+ msleep(200);
+
+ /* is SControl restored correctly? */
+ if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
+ return rc;
+ } while ((scontrol & 0xf0f) != 0x300 && --tries);
- if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
- return rc;
+ if ((scontrol & 0xf0f) != 0x300) {
+ ata_link_printk(link, KERN_ERR,
+ "failed to resume link (SControl %X)\n",
+ scontrol);
+ return 0;
+ }
- /* Some PHYs react badly if SStatus is pounded immediately
- * after resuming. Delay 200ms before debouncing.
- */
- msleep(200);
+ if (tries < ATA_LINK_RESUME_TRIES)
+ ata_link_printk(link, KERN_WARNING,
+ "link resume succeeded after %d retries\n",
+ ATA_LINK_RESUME_TRIES - tries);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
unsigned int readid_flags)
{
u64 n_sectors = dev->n_sectors;
+ u64 n_native_sectors = dev->n_native_sectors;
int rc;
if (!ata_dev_enabled(dev))
goto fail;
/* verify n_sectors hasn't changed */
- if (dev->class == ATA_DEV_ATA && n_sectors &&
- dev->n_sectors != n_sectors) {
- ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
- "%llu != %llu\n",
- (unsigned long long)n_sectors,
- (unsigned long long)dev->n_sectors);
-
- /* restore original n_sectors */
- dev->n_sectors = n_sectors;
+ if (dev->class != ATA_DEV_ATA || !n_sectors ||
+ dev->n_sectors == n_sectors)
+ return 0;
- rc = -ENODEV;
- goto fail;
+ /* n_sectors has changed */
+ ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch %llu != %llu\n",
+ (unsigned long long)n_sectors,
+ (unsigned long long)dev->n_sectors);
+
+ /*
+ * Something could have caused HPA to be unlocked
+ * involuntarily. If n_native_sectors hasn't changed and the
+ * new size matches it, keep the device.
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, continuing\n");
+ /* keep using the old n_sectors */
+ dev->n_sectors = n_sectors;
+ return 0;
}
- return 0;
+ /*
+ * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try
+ * unlocking HPA in those cases.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15396
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
+ !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "old n_sectors matches native, probably "
+ "late HPA lock, will try to unlock HPA\n");
+ /* try unlocking HPA */
+ dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+ rc = -EIO;
+ } else
+ rc = -ENODEV;
+ /* restore original n_[native_]sectors and fail */
+ dev->n_native_sectors = n_native_sectors;
+ dev->n_sectors = n_sectors;
fail:
ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
return rc;
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
+ { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
+
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
+ /* this one allows HPA unlocking but fails IOs on the area */
+ { "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
+
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+ /*
+ * Devices which choke on SETXFER. Applies only if both the
+ * device and controller are SATA.
+ */
+ { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
+
/* End Marker */
{ }
};
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
+ struct ata_port *ap;
unsigned int tag;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
qc->flags = 0;
tag = qc->tag;
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- struct ata_link *link = qc->dev->link;
+ struct ata_port *ap;
+ struct ata_link *link;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
struct ata_device *dev = qc->dev;
struct ata_eh_info *ehi = &dev->link->eh_info;
- WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
-
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- if (!ata_tag_internal(qc->tag)) {
- /* always fill result TF for failed qc */
- fill_result_tf(qc);
+ /* always fill result TF for failed qc */
+ fill_result_tf(qc);
+
+ if (!ata_tag_internal(qc->tag))
ata_qc_schedule_eh(qc);
- return;
- }
+ else
+ __ata_qc_complete(qc);
+ return;
}
+ WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
+
/* read result TF if requested */
if (qc->flags & ATA_QCFLAG_RESULT_TF)
fill_result_tf(qc);
#endif
/**
- * ata_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-int ata_port_start(struct ata_port *ap)
-{
- struct device *dev = ap->dev;
-
- ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
- GFP_KERNEL);
- if (!ap->prd)
- return -ENOMEM;
-
- return 0;
-}
-
-/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
*
dev->link = link;
dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+ dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
ata_dev_init(dev);
}
}
ap->pflags |= ATA_PFLAG_INITIALIZING;
ap->lock = &host->lock;
- ap->flags = ATA_FLAG_DISABLED;
ap->print_id = -1;
- ap->ctl = ATA_DEVCTL_OBS;
ap->host = host;
ap->dev = host->dev;
- ap->last_ctl = 0xFF;
#if defined(ATA_VERBOSE_DEBUG)
/* turn on all debugging levels */
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
-#ifdef CONFIG_ATA_SFF
- INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
-#else
- INIT_DELAYED_WORK(&ap->port_task, NULL);
-#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
+ ata_sff_port_init(ap);
+
return ap;
}
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
- ata_port_probe(ap);
-
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
{ "3.0Gbps", .spd_limit = 2 },
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
{ "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
static int __init ata_init(void)
{
- ata_parse_force_param();
+ int rc = -ENOMEM;
- ata_wq = create_workqueue("ata");
- if (!ata_wq)
- goto free_force_tbl;
+ ata_parse_force_param();
ata_aux_wq = create_singlethread_workqueue("ata_aux");
if (!ata_aux_wq)
- goto free_wq;
+ goto fail;
+
+ rc = ata_sff_init();
+ if (rc)
+ goto fail;
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
return 0;
-free_wq:
- destroy_workqueue(ata_wq);
-free_force_tbl:
+fail:
kfree(ata_force_tbl);
- return -ENOMEM;
+ if (ata_aux_wq)
+ destroy_workqueue(ata_aux_wq);
+ return rc;
}
static void __exit ata_exit(void)
{
+ ata_sff_exit();
kfree(ata_force_tbl);
- destroy_workqueue(ata_wq);
destroy_workqueue(ata_aux_wq);
}
subsys_initcall(ata_init);
module_exit(ata_exit);
-static unsigned long ratelimit_time;
-static DEFINE_SPINLOCK(ata_ratelimit_lock);
+static DEFINE_RATELIMIT_STATE(ratelimit, HZ / 5, 1);
int ata_ratelimit(void)
{
- int rc;
- unsigned long flags;
-
- spin_lock_irqsave(&ata_ratelimit_lock, flags);
-
- if (time_after(jiffies, ratelimit_time)) {
- rc = 1;
- ratelimit_time = jiffies + (HZ/5);
- } else
- rc = 0;
-
- spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
-
- return rc;
+ return __ratelimit(&ratelimit);
}
/**
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
-EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_pio_queue_task);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff