include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit...
[safe/jmp/linux-2.6] / drivers / ata / libata-acpi.c
index 8c1cfc6..7b5eea7 100644 (file)
 #include <linux/acpi.h>
 #include <linux/libata.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <scsi/scsi_device.h>
 #include "libata.h"
 
 #include <acpi/acpi_bus.h>
-#include <acpi/acnames.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acparser.h>
-#include <acpi/acexcep.h>
-#include <acpi/acmacros.h>
-#include <acpi/actypes.h>
-
-enum {
-       ATA_ACPI_FILTER_SETXFER = 1 << 0,
-       ATA_ACPI_FILTER_LOCK    = 1 << 1,
-
-       ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
-                                 ATA_ACPI_FILTER_LOCK,
-};
 
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
 module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
 
 #define NO_PORT_MULT           0xffff
 #define SATA_ADR(root, pmp)    (((root) << 16) | (pmp))
@@ -78,7 +65,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap)
        WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
 
        if (!sata_pmp_attached(ap)) {
-               acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+               u64 adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
 
                ap->link.device->acpi_handle =
                        acpi_get_child(ap->host->acpi_handle, adr);
@@ -87,8 +74,8 @@ void ata_acpi_associate_sata_port(struct ata_port *ap)
 
                ap->link.device->acpi_handle = NULL;
 
-               ata_port_for_each_link(link, ap) {
-                       acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
+               ata_for_each_link(link, ap, EDGE) {
+                       u64 adr = SATA_ADR(ap->port_no, link->pmp);
 
                        link->device->acpi_handle =
                                acpi_get_child(ap->host->acpi_handle, adr);
@@ -118,48 +105,102 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
                ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+       if (dev)
+               dev->flags |= ATA_DFLAG_DETACH;
+       else {
+               struct ata_link *tlink;
+               struct ata_device *tdev;
+
+               ata_for_each_link(tlink, ap, EDGE)
+                       ata_for_each_dev(tdev, tlink, ALL)
+                               tdev->flags |= ATA_DFLAG_DETACH;
+       }
+
+       ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ *
+ * All ACPI bay / device realted events end up in this function.  If
+ * the event is port-wide @dev is NULL.  If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context.  May sleep.
+ */
 static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
                                    u32 event)
 {
-       char event_string[12];
-       char *envp[] = { event_string, NULL };
-       struct ata_eh_info *ehi;
-       struct kobject *kobj = NULL;
+       struct ata_eh_info *ehi = &ap->link.eh_info;
        int wait = 0;
        unsigned long flags;
+       acpi_handle handle;
 
-       if (!ap)
-               ap = dev->link->ap;
-       ehi = &ap->link.eh_info;
+       if (dev)
+               handle = dev->acpi_handle;
+       else
+               handle = ap->acpi_handle;
 
        spin_lock_irqsave(ap->lock, flags);
-
+       /*
+        * When dock driver calls into the routine, it will always use
+        * ACPI_NOTIFY_BUS_CHECK/ACPI_NOTIFY_DEVICE_CHECK for add and
+        * ACPI_NOTIFY_EJECT_REQUEST for remove
+        */
        switch (event) {
        case ACPI_NOTIFY_BUS_CHECK:
        case ACPI_NOTIFY_DEVICE_CHECK:
                ata_ehi_push_desc(ehi, "ACPI event");
+
                ata_ehi_hotplugged(ehi);
                ata_port_freeze(ap);
                break;
-
        case ACPI_NOTIFY_EJECT_REQUEST:
                ata_ehi_push_desc(ehi, "ACPI event");
-               if (dev)
-                       dev->flags |= ATA_DFLAG_DETACH;
-               else {
-                       struct ata_link *tlink;
-                       struct ata_device *tdev;
-
-                       ata_port_for_each_link(tlink, ap)
-                               ata_link_for_each_dev(tdev, tlink)
-                                       tdev->flags |= ATA_DFLAG_DETACH;
-               }
 
-               ata_port_schedule_eh(ap);
+               ata_acpi_detach_device(ap, dev);
                wait = 1;
                break;
        }
 
+       spin_unlock_irqrestore(ap->lock, flags);
+
+       if (wait)
+               ata_port_wait_eh(ap);
+}
+
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+       struct ata_device *dev = data;
+
+       ata_acpi_handle_hotplug(dev->link->ap, dev, event);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+       struct ata_port *ap = data;
+
+       ata_acpi_handle_hotplug(ap, NULL, event);
+}
+
+static void ata_acpi_uevent(struct ata_port *ap, struct ata_device *dev,
+       u32 event)
+{
+       struct kobject *kobj = NULL;
+       char event_string[20];
+       char *envp[] = { event_string, NULL };
+
        if (dev) {
                if (dev->sdev)
                        kobj = &dev->sdev->sdev_gendev.kobj;
@@ -167,29 +208,31 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
                kobj = &ap->dev->kobj;
 
        if (kobj) {
-               sprintf(event_string, "BAY_EVENT=%d", event);
+               snprintf(event_string, 20, "BAY_EVENT=%d", event);
                kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
        }
+}
 
-       spin_unlock_irqrestore(ap->lock, flags);
-
-       if (wait)
-               ata_port_wait_eh(ap);
+static void ata_acpi_ap_uevent(acpi_handle handle, u32 event, void *data)
+{
+       ata_acpi_uevent(data, NULL, event);
 }
 
-static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
+static void ata_acpi_dev_uevent(acpi_handle handle, u32 event, void *data)
 {
        struct ata_device *dev = data;
-
-       ata_acpi_handle_hotplug(NULL, dev, event);
+       ata_acpi_uevent(dev->link->ap, dev, event);
 }
 
-static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
-{
-       struct ata_port *ap = data;
+static struct acpi_dock_ops ata_acpi_dev_dock_ops = {
+       .handler = ata_acpi_dev_notify_dock,
+       .uevent = ata_acpi_dev_uevent,
+};
 
-       ata_acpi_handle_hotplug(ap, NULL, event);
-}
+static struct acpi_dock_ops ata_acpi_ap_dock_ops = {
+       .handler = ata_acpi_ap_notify_dock,
+       .uevent = ata_acpi_ap_uevent,
+};
 
 /**
  * ata_acpi_associate - associate ATA host with ACPI objects
@@ -224,28 +267,18 @@ void ata_acpi_associate(struct ata_host *host)
                        ata_acpi_associate_ide_port(ap);
 
                if (ap->acpi_handle) {
-                       acpi_install_notify_handler(ap->acpi_handle,
-                                                   ACPI_SYSTEM_NOTIFY,
-                                                   ata_acpi_ap_notify, ap);
-#if defined(CONFIG_ACPI_DOCK) || defined(CONFIG_ACPI_DOCK_MODULE)
                        /* we might be on a docking station */
                        register_hotplug_dock_device(ap->acpi_handle,
-                                                    ata_acpi_ap_notify, ap);
-#endif
+                                            &ata_acpi_ap_dock_ops, ap);
                }
 
                for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
                        struct ata_device *dev = &ap->link.device[j];
 
                        if (dev->acpi_handle) {
-                               acpi_install_notify_handler(dev->acpi_handle,
-                                               ACPI_SYSTEM_NOTIFY,
-                                               ata_acpi_dev_notify, dev);
-#if defined(CONFIG_ACPI_DOCK) || defined(CONFIG_ACPI_DOCK_MODULE)
                                /* we might be on a docking station */
                                register_hotplug_dock_device(dev->acpi_handle,
-                                               ata_acpi_dev_notify, dev);
-#endif
+                                            &ata_acpi_dev_dock_ops, dev);
                        }
                }
        }
@@ -540,12 +573,9 @@ int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm)
 {
        struct ata_device *dev;
 
-       ata_link_for_each_dev(dev, &ap->link) {
+       ata_for_each_dev(dev, &ap->link, ENABLED) {
                unsigned long xfer_mask, udma_mask;
 
-               if (!ata_dev_enabled(dev))
-                       continue;
-
                xfer_mask = ata_acpi_gtm_xfermask(dev, gtm);
                ata_unpack_xfermask(xfer_mask, NULL, NULL, &udma_mask);
 
@@ -574,10 +604,11 @@ static void ata_acpi_gtf_to_tf(struct ata_device *dev,
        tf->command = gtf->tf[6];       /* 0x1f7 */
 }
 
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+                             const struct ata_taskfile *tf,
                              const struct ata_taskfile *ptf)
 {
-       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+       if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
                /* libata doesn't use ACPI to configure transfer mode.
                 * It will only confuse device configuration.  Skip.
                 */
@@ -586,7 +617,7 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
                        return 1;
        }
 
-       if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+       if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
                /* BIOS writers, sorry but we don't wanna lock
                 * features unless the user explicitly said so.
                 */
@@ -608,6 +639,25 @@ static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
                        return 1;
        }
 
+       if (tf->command == ATA_CMD_SET_FEATURES &&
+           tf->feature == SETFEATURES_SATA_ENABLE) {
+               /* inhibit enabling DIPM */
+               if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
+                   tf->nsect == SATA_DIPM)
+                       return 1;
+
+               /* inhibit FPDMA non-zero offset */
+               if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+                   (tf->nsect == SATA_FPDMA_OFFSET ||
+                    tf->nsect == SATA_FPDMA_IN_ORDER))
+                       return 1;
+
+               /* inhibit FPDMA auto activation */
+               if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+                   tf->nsect == SATA_FPDMA_AA)
+                       return 1;
+       }
+
        return 0;
 }
 
@@ -642,6 +692,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
        struct ata_taskfile tf, ptf, rtf;
        unsigned int err_mask;
        const char *level;
+       const char *descr;
        char msg[60];
        int rc;
 
@@ -656,7 +707,7 @@ static int ata_acpi_run_tf(struct ata_device *dev,
                pptf = &ptf;
        }
 
-       if (!ata_acpi_filter_tf(&tf, pptf)) {
+       if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
                rtf = tf;
                err_mask = ata_exec_internal(dev, &rtf, NULL,
                                             DMA_NONE, NULL, 0, 0);
@@ -689,11 +740,13 @@ static int ata_acpi_run_tf(struct ata_device *dev,
                snprintf(msg, sizeof(msg), "filtered out");
                rc = 0;
        }
+       descr = ata_get_cmd_descript(tf.command);
 
        ata_dev_printk(dev, level,
-                      "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
+                      "ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x (%s) %s\n",
                       tf.command, tf.feature, tf.nsect, tf.lbal,
-                      tf.lbam, tf.lbah, tf.device, msg);
+                      tf.lbam, tf.lbah, tf.device,
+                      (descr ? descr : "unknown"), msg);
 
        return rc;
 }
@@ -701,9 +754,9 @@ static int ata_acpi_run_tf(struct ata_device *dev,
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
  * @dev: target ATA device
- * @nr_executed: out paramter for the number of executed commands
+ * @nr_executed: out parameter for the number of executed commands
  *
- * Evaluate _GTF and excute returned taskfiles.
+ * Evaluate _GTF and execute returned taskfiles.
  *
  * LOCKING:
  * EH context.
@@ -755,12 +808,11 @@ static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
  * EH context.
  *
  * RETURNS:
- * 0 on success, -errno on failure.
+ * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure.
  */
 static int ata_acpi_push_id(struct ata_device *dev)
 {
        struct ata_port *ap = dev->link->ap;
-       int err;
        acpi_status status;
        struct acpi_object_list input;
        union acpi_object in_params[1];
@@ -783,12 +835,16 @@ static int ata_acpi_push_id(struct ata_device *dev)
        status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
        swap_buf_le16(dev->id, ATA_ID_WORDS);
 
-       err = ACPI_FAILURE(status) ? -EIO : 0;
-       if (err < 0)
+       if (status == AE_NOT_FOUND)
+               return -ENOENT;
+
+       if (ACPI_FAILURE(status)) {
                ata_dev_printk(dev, KERN_WARNING,
                               "ACPI _SDD failed (AE 0x%x)\n", status);
+               return -EIO;
+       }
 
-       return err;
+       return 0;
 }
 
 /**
@@ -837,7 +893,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
                 * use values set by _STM.  Cache _GTF result and
                 * schedule _GTF.
                 */
-               ata_link_for_each_dev(dev, &ap->link) {
+               ata_for_each_dev(dev, &ap->link, ALL) {
                        ata_acpi_clear_gtf(dev);
                        if (ata_dev_enabled(dev) &&
                            ata_dev_get_GTF(dev, NULL) >= 0)
@@ -848,7 +904,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
                 * there's no reason to evaluate IDE _GTF early
                 * without _STM.  Clear cache and schedule _GTF.
                 */
-               ata_link_for_each_dev(dev, &ap->link) {
+               ata_for_each_dev(dev, &ap->link, ALL) {
                        ata_acpi_clear_gtf(dev);
                        if (ata_dev_enabled(dev))
                                dev->flags |= ATA_DFLAG_ACPI_PENDING;
@@ -876,8 +932,8 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
        if (state.event == PM_EVENT_ON)
                acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
 
-       ata_link_for_each_dev(dev, &ap->link) {
-               if (dev->acpi_handle && ata_dev_enabled(dev))
+       ata_for_each_dev(dev, &ap->link, ENABLED) {
+               if (dev->acpi_handle)
                        acpi_bus_set_power(dev->acpi_handle,
                                state.event == PM_EVENT_ON ?
                                        ACPI_STATE_D0 : ACPI_STATE_D3);
@@ -919,7 +975,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
        /* do _SDD if SATA */
        if (acpi_sata) {
                rc = ata_acpi_push_id(dev);
-               if (rc)
+               if (rc && rc != -ENOENT)
                        goto acpi_err;
        }