#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#ifdef CONFIG_X86
#include <asm/mpspec.h>
#endif
#include <linux/pci.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <linux/dmi.h>
+
+#include "internal.h"
#define _COMPONENT ACPI_BUS_COMPONENT
ACPI_MODULE_NAME("bus");
#define STRUCT_TO_INT(s) (*((int*)&s))
+static int set_power_nocheck(const struct dmi_system_id *id)
+{
+ printk(KERN_NOTICE PREFIX "%s detected - "
+ "disable power check in power transistion\n", id->ident);
+ acpi_power_nocheck = 1;
+ return 0;
+}
+static struct dmi_system_id __cpuinitdata power_nocheck_dmi_table[] = {
+ {
+ set_power_nocheck, "HP Pavilion 05", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_SYS_VENDOR, "HP Pavilion 05"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "2001211RE101GLEND") }, NULL},
+ {},
+};
+
+
/* --------------------------------------------------------------------------
Device Management
-------------------------------------------------------------------------- */
EXPORT_SYMBOL(acpi_bus_get_device);
-int acpi_bus_get_status(struct acpi_device *device)
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+ unsigned long long *sta)
{
- acpi_status status = AE_OK;
- unsigned long sta = 0;
+ acpi_status status;
+ status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+ if (ACPI_SUCCESS(status))
+ return AE_OK;
- if (!device)
- return -EINVAL;
-
- /*
- * Evaluate _STA if present.
- */
- if (device->flags.dynamic_status) {
- status =
- acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- STRUCT_TO_INT(device->status) = (int)sta;
+ if (status == AE_NOT_FOUND) {
+ *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+ return AE_OK;
}
+ return status;
+}
- /*
- * Otherwise we assume the status of our parent (unless we don't
- * have one, in which case status is implied).
- */
- else if (device->parent)
- device->status = device->parent->status;
- else
- STRUCT_TO_INT(device->status) =
- ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+int acpi_bus_get_status(struct acpi_device *device)
+{
+ acpi_status status;
+ unsigned long long sta;
+
+ status = acpi_bus_get_status_handle(device->handle, &sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ STRUCT_TO_INT(device->status) = (int) sta;
if (device->status.functional && !device->status.present) {
- printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
- "functional but not present; setting present\n",
- device->pnp.bus_id, (u32) STRUCT_TO_INT(device->status));
- device->status.present = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
+ "functional but not present;\n",
+ device->pnp.bus_id,
+ (u32) STRUCT_TO_INT(device->status)));
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
device->pnp.bus_id,
(u32) STRUCT_TO_INT(device->status)));
-
return 0;
}
-
EXPORT_SYMBOL(acpi_bus_get_status);
void acpi_bus_private_data_handler(acpi_handle handle,
- u32 function, void *context)
+ void *context)
{
return;
}
int result = 0;
acpi_status status = 0;
struct acpi_device *device = NULL;
- unsigned long psc = 0;
+ unsigned long long psc = 0;
result = acpi_bus_get_device(handle, &device);
* Get the device's power state either directly (via _PSC) or
* indirectly (via power resources).
*/
- if (device->power.flags.explicit_get) {
+ if (device->power.flags.power_resources) {
+ result = acpi_power_get_inferred_state(device);
+ if (result)
+ return result;
+ } else if (device->power.flags.explicit_get) {
status = acpi_evaluate_integer(device->handle, "_PSC",
NULL, &psc);
if (ACPI_FAILURE(status))
return -ENODEV;
device->power.state = (int)psc;
- } else if (device->power.flags.power_resources) {
- result = acpi_power_get_inferred_state(device);
- if (result)
- return result;
}
*state = device->power.state;
/*
* Get device's current power state
*/
- acpi_bus_get_power(device->handle, &device->power.state);
+ if (!acpi_power_nocheck) {
+ /*
+ * Maybe the incorrect power state is returned on the bogus
+ * bios, which is different with the real power state.
+ * For example: the bios returns D0 state and the real power
+ * state is D3. OS expects to set the device to D0 state. In
+ * such case if OS uses the power state returned by the BIOS,
+ * the device can't be transisted to the correct power state.
+ * So if the acpi_power_nocheck is set, it is unnecessary to
+ * get the power state by calling acpi_bus_get_power.
+ */
+ acpi_bus_get_power(device->handle, &device->power.state);
+ }
if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
end:
if (result)
printk(KERN_WARNING PREFIX
- "Transitioning device [%s] to D%d\n",
+ "Device [%s] failed to transition to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
EXPORT_SYMBOL(acpi_bus_can_wakeup);
+static void acpi_print_osc_error(acpi_handle handle,
+ struct acpi_osc_context *context, char *error)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER};
+ int i;
+
+ if (ACPI_FAILURE(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer)))
+ printk(KERN_DEBUG "%s\n", error);
+ else {
+ printk(KERN_DEBUG "%s:%s\n", (char *)buffer.pointer, error);
+ kfree(buffer.pointer);
+ }
+ printk(KERN_DEBUG"_OSC request data:");
+ for (i = 0; i < context->cap.length; i += sizeof(u32))
+ printk("%x ", *((u32 *)(context->cap.pointer + i)));
+ printk("\n");
+}
+
+static u8 hex_val(unsigned char c)
+{
+ return isdigit(c) ? c - '0' : toupper(c) - 'A' + 10;
+}
+
+static acpi_status acpi_str_to_uuid(char *str, u8 *uuid)
+{
+ int i;
+ static int opc_map_to_uuid[16] = {6, 4, 2, 0, 11, 9, 16, 14, 19, 21,
+ 24, 26, 28, 30, 32, 34};
+
+ if (strlen(str) != 36)
+ return AE_BAD_PARAMETER;
+ for (i = 0; i < 36; i++) {
+ if (i == 8 || i == 13 || i == 18 || i == 23) {
+ if (str[i] != '-')
+ return AE_BAD_PARAMETER;
+ } else if (!isxdigit(str[i]))
+ return AE_BAD_PARAMETER;
+ }
+ for (i = 0; i < 16; i++) {
+ uuid[i] = hex_val(str[opc_map_to_uuid[i]]) << 4;
+ uuid[i] |= hex_val(str[opc_map_to_uuid[i] + 1]);
+ }
+ return AE_OK;
+}
+
+acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context)
+{
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[4];
+ union acpi_object *out_obj;
+ u8 uuid[16];
+ u32 errors;
+ struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
+
+ if (!context)
+ return AE_ERROR;
+ if (ACPI_FAILURE(acpi_str_to_uuid(context->uuid_str, uuid)))
+ return AE_ERROR;
+ context->ret.length = ACPI_ALLOCATE_BUFFER;
+ context->ret.pointer = NULL;
+
+ /* Setting up input parameters */
+ input.count = 4;
+ input.pointer = in_params;
+ in_params[0].type = ACPI_TYPE_BUFFER;
+ in_params[0].buffer.length = 16;
+ in_params[0].buffer.pointer = uuid;
+ in_params[1].type = ACPI_TYPE_INTEGER;
+ in_params[1].integer.value = context->rev;
+ in_params[2].type = ACPI_TYPE_INTEGER;
+ in_params[2].integer.value = context->cap.length/sizeof(u32);
+ in_params[3].type = ACPI_TYPE_BUFFER;
+ in_params[3].buffer.length = context->cap.length;
+ in_params[3].buffer.pointer = context->cap.pointer;
+
+ status = acpi_evaluate_object(handle, "_OSC", &input, &output);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ if (!output.length)
+ return AE_NULL_OBJECT;
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER
+ || out_obj->buffer.length != context->cap.length) {
+ acpi_print_osc_error(handle, context,
+ "_OSC evaluation returned wrong type");
+ status = AE_TYPE;
+ goto out_kfree;
+ }
+ /* Need to ignore the bit0 in result code */
+ errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
+ if (errors) {
+ if (errors & OSC_REQUEST_ERROR)
+ acpi_print_osc_error(handle, context,
+ "_OSC request failed");
+ if (errors & OSC_INVALID_UUID_ERROR)
+ acpi_print_osc_error(handle, context,
+ "_OSC invalid UUID");
+ if (errors & OSC_INVALID_REVISION_ERROR)
+ acpi_print_osc_error(handle, context,
+ "_OSC invalid revision");
+ if (errors & OSC_CAPABILITIES_MASK_ERROR) {
+ if (((u32 *)context->cap.pointer)[OSC_QUERY_TYPE]
+ & OSC_QUERY_ENABLE)
+ goto out_success;
+ status = AE_SUPPORT;
+ goto out_kfree;
+ }
+ status = AE_ERROR;
+ goto out_kfree;
+ }
+out_success:
+ context->ret.length = out_obj->buffer.length;
+ context->ret.pointer = kmalloc(context->ret.length, GFP_KERNEL);
+ if (!context->ret.pointer) {
+ status = AE_NO_MEMORY;
+ goto out_kfree;
+ }
+ memcpy(context->ret.pointer, out_obj->buffer.pointer,
+ context->ret.length);
+ status = AE_OK;
+
+out_kfree:
+ kfree(output.pointer);
+ if (status != AE_OK)
+ context->ret.pointer = NULL;
+ return status;
+}
+EXPORT_SYMBOL(acpi_run_osc);
+
+static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48";
+static void acpi_bus_osc_support(void)
+{
+ u32 capbuf[2];
+ struct acpi_osc_context context = {
+ .uuid_str = sb_uuid_str,
+ .rev = 1,
+ .cap.length = 8,
+ .cap.pointer = capbuf,
+ };
+ acpi_handle handle;
+
+ capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+ capbuf[OSC_SUPPORT_TYPE] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */
+#if defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) ||\
+ defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE)
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PAD_SUPPORT;
+#endif
+
+#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
+#endif
+ if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
+ return;
+ if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
+ kfree(context.ret.pointer);
+ /* do we need to check the returned cap? Sounds no */
+}
+
/* --------------------------------------------------------------------------
Event Management
-------------------------------------------------------------------------- */
Notification Handling
-------------------------------------------------------------------------- */
-static int
-acpi_bus_check_device(struct acpi_device *device, int *status_changed)
+static void acpi_bus_check_device(acpi_handle handle)
{
- acpi_status status = 0;
+ struct acpi_device *device;
+ acpi_status status;
struct acpi_device_status old_status;
-
+ if (acpi_bus_get_device(handle, &device))
+ return;
if (!device)
- return -EINVAL;
-
- if (status_changed)
- *status_changed = 0;
+ return;
old_status = device->status;
*/
if (device->parent && !device->parent->status.present) {
device->status = device->parent->status;
- if (STRUCT_TO_INT(old_status) != STRUCT_TO_INT(device->status)) {
- if (status_changed)
- *status_changed = 1;
- }
- return 0;
+ return;
}
status = acpi_bus_get_status(device);
if (ACPI_FAILURE(status))
- return -ENODEV;
+ return;
if (STRUCT_TO_INT(old_status) == STRUCT_TO_INT(device->status))
- return 0;
-
- if (status_changed)
- *status_changed = 1;
+ return;
/*
* Device Insertion/Removal
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device removal detected\n"));
/* TBD: Handle device removal */
}
-
- return 0;
}
-static int acpi_bus_check_scope(struct acpi_device *device)
+static void acpi_bus_check_scope(acpi_handle handle)
{
- int result = 0;
- int status_changed = 0;
-
-
- if (!device)
- return -EINVAL;
-
/* Status Change? */
- result = acpi_bus_check_device(device, &status_changed);
- if (result)
- return result;
-
- if (!status_changed)
- return 0;
+ acpi_bus_check_device(handle);
/*
* TBD: Enumerate child devices within this device's scope and
* run acpi_bus_check_device()'s on them.
*/
+}
- return 0;
+static BLOCKING_NOTIFIER_HEAD(acpi_bus_notify_list);
+int register_acpi_bus_notifier(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&acpi_bus_notify_list, nb);
}
+EXPORT_SYMBOL_GPL(register_acpi_bus_notifier);
+
+void unregister_acpi_bus_notifier(struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&acpi_bus_notify_list, nb);
+}
+EXPORT_SYMBOL_GPL(unregister_acpi_bus_notifier);
/**
* acpi_bus_notify
*/
static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
{
- int result = 0;
struct acpi_device *device = NULL;
+ struct acpi_driver *driver;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notification %#02x to handle %p\n",
+ type, handle));
- if (acpi_bus_get_device(handle, &device))
- return;
+ blocking_notifier_call_chain(&acpi_bus_notify_list,
+ type, (void *)handle);
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_scope(device);
+ acpi_bus_check_scope(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
break;
case ACPI_NOTIFY_DEVICE_CHECK:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK notification for device [%s]\n",
- device->pnp.bus_id));
- result = acpi_bus_check_device(device, NULL);
+ acpi_bus_check_device(handle);
/*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
break;
case ACPI_NOTIFY_DEVICE_WAKE:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE WAKE notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_EJECT_REQUEST:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received EJECT REQUEST notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_DEVICE_CHECK_LIGHT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received DEVICE CHECK LIGHT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD: Exactly what does 'light' mean? */
break;
case ACPI_NOTIFY_FREQUENCY_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received FREQUENCY MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_BUS_MODE_MISMATCH:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received BUS MODE MISMATCH notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
case ACPI_NOTIFY_POWER_FAULT:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Received POWER FAULT notification for device [%s]\n",
- device->pnp.bus_id));
/* TBD */
break;
break;
}
- return;
+ acpi_bus_get_device(handle, &device);
+ if (device) {
+ driver = device->driver;
+ if (driver && driver->ops.notify &&
+ (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS))
+ driver->ops.notify(device, type);
+ }
}
/* --------------------------------------------------------------------------
acpi_status status = AE_OK;
extern acpi_status acpi_os_initialize1(void);
-
- status = acpi_os_initialize1();
+ acpi_os_initialize1();
status =
acpi_enable_subsystem(ACPI_NO_HARDWARE_INIT | ACPI_NO_ACPI_ENABLE);
goto error1;
}
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Unable to initialize ACPI OS objects\n");
- goto error1;
- }
-#ifdef CONFIG_ACPI_EC
/*
* ACPI 2.0 requires the EC driver to be loaded and work before
* the EC device is found in the namespace (i.e. before acpi_initialize_objects()
*/
status = acpi_ec_ecdt_probe();
/* Ignore result. Not having an ECDT is not fatal. */
-#endif
+
+ acpi_bus_osc_support();
status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION);
if (ACPI_FAILURE(status)) {
goto error1;
}
+ acpi_early_processor_set_pdc();
+
+ /*
+ * Maybe EC region is required at bus_scan/acpi_get_devices. So it
+ * is necessary to enable it as early as possible.
+ */
+ acpi_boot_ec_enable();
+
printk(KERN_INFO PREFIX "Interpreter enabled\n");
/* Initialize sleep structures */
acpi_kobj = NULL;
}
+ init_acpi_device_notify();
result = acpi_bus_init();
if (!result) {
} else
disable_acpi();
+ if (acpi_disabled)
+ return result;
+
+ /*
+ * If the laptop falls into the DMI check table, the power state check
+ * will be disabled in the course of device power transistion.
+ */
+ dmi_check_system(power_nocheck_dmi_table);
+
+ acpi_scan_init();
+ acpi_ec_init();
+ acpi_power_init();
+ acpi_system_init();
+ acpi_debug_init();
+ acpi_sleep_proc_init();
+ acpi_wakeup_device_init();
return result;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff