EXPORT_SYMBOL(blk_max_low_pfn);
unsigned long blk_max_pfn;
-EXPORT_SYMBOL(blk_max_pfn);
/**
* blk_queue_prep_rq - set a prepare_request function for queue
EXPORT_SYMBOL(blk_queue_prep_rq);
/**
+ * blk_queue_set_discard - set a discard_sectors function for queue
+ * @q: queue
+ * @dfn: prepare_discard function
+ *
+ * It's possible for a queue to register a discard callback which is used
+ * to transform a discard request into the appropriate type for the
+ * hardware. If none is registered, then discard requests are failed
+ * with %EOPNOTSUPP.
+ *
+ */
+void blk_queue_set_discard(struct request_queue *q, prepare_discard_fn *dfn)
+{
+ q->prepare_discard_fn = dfn;
+}
+EXPORT_SYMBOL(blk_queue_set_discard);
+
+/**
* blk_queue_merge_bvec - set a merge_bvec function for queue
* @q: queue
* @mbfn: merge_bvec_fn
}
EXPORT_SYMBOL(blk_queue_softirq_done);
+void blk_queue_rq_timeout(struct request_queue *q, unsigned int timeout)
+{
+ q->rq_timeout = timeout;
+}
+EXPORT_SYMBOL_GPL(blk_queue_rq_timeout);
+
+void blk_queue_rq_timed_out(struct request_queue *q, rq_timed_out_fn *fn)
+{
+ q->rq_timed_out_fn = fn;
+}
+EXPORT_SYMBOL_GPL(blk_queue_rq_timed_out);
+
+void blk_queue_lld_busy(struct request_queue *q, lld_busy_fn *fn)
+{
+ q->lld_busy_fn = fn;
+}
+EXPORT_SYMBOL_GPL(blk_queue_lld_busy);
+
/**
* blk_queue_make_request - define an alternate make_request function for a device
* @q: the request queue for the device to be affected
q->nr_requests = BLKDEV_MAX_RQ;
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
+ blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+ blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
+
q->make_request_fn = mfn;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
if (q->unplug_delay == 0)
q->unplug_delay = 1;
- INIT_WORK(&q->unplug_work, blk_unplug_work);
-
q->unplug_timer.function = blk_unplug_timeout;
q->unplug_timer.data = (unsigned long)q;
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @page.
+ * buffers for doing I/O to pages residing above @dma_addr.
**/
void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
{
/* Assume anything <= 4GB can be handled by IOMMU.
Actually some IOMMUs can handle everything, but I don't
know of a way to test this here. */
- if (b_pfn < (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
{
if ((max_sectors << 9) < PAGE_CACHE_SIZE) {
max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_sectors);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_sectors);
}
if (BLK_DEF_MAX_SECTORS > max_sectors)
{
if (!max_segments) {
max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_segments);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_segments);
}
q->max_phys_segments = max_segments;
* Description:
* Enables a low level driver to set an upper limit on the number of
* hw data segments in a request. This would be the largest number of
- * address/length pairs the host adapter can actually give as once
+ * address/length pairs the host adapter can actually give at once
* to the device.
**/
void blk_queue_max_hw_segments(struct request_queue *q,
{
if (!max_segments) {
max_segments = 1;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_segments);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_segments);
}
q->max_hw_segments = max_segments;
{
if (max_size < PAGE_CACHE_SIZE) {
max_size = PAGE_CACHE_SIZE;
- printk(KERN_INFO "%s: set to minimum %d\n", __FUNCTION__,
- max_size);
+ printk(KERN_INFO "%s: set to minimum %d\n",
+ __func__, max_size);
}
q->max_segment_size = max_size;
/* zero is "infinity" */
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+ t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
- t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments);
- t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
- t->max_segment_size = min(t->max_segment_size, b->max_segment_size);
+ t->max_phys_segments = min_not_zero(t->max_phys_segments, b->max_phys_segments);
+ t->max_hw_segments = min_not_zero(t->max_hw_segments, b->max_hw_segments);
+ t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size);
t->hardsect_size = max(t->hardsect_size, b->hardsect_size);
- if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
- clear_bit(QUEUE_FLAG_CLUSTER, &t->queue_flags);
+ if (!t->queue_lock)
+ WARN_ON_ONCE(1);
+ else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
+ unsigned long flags;
+ spin_lock_irqsave(t->queue_lock, flags);
+ queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
+ spin_unlock_irqrestore(t->queue_lock, flags);
+ }
}
EXPORT_SYMBOL(blk_queue_stack_limits);
/**
- * blk_queue_dma_drain - Set up a drain buffer for excess dma.
+ * blk_queue_dma_pad - set pad mask
+ * @q: the request queue for the device
+ * @mask: pad mask
+ *
+ * Set dma pad mask.
+ *
+ * Appending pad buffer to a request modifies the last entry of a
+ * scatter list such that it includes the pad buffer.
+ **/
+void blk_queue_dma_pad(struct request_queue *q, unsigned int mask)
+{
+ q->dma_pad_mask = mask;
+}
+EXPORT_SYMBOL(blk_queue_dma_pad);
+
+/**
+ * blk_queue_update_dma_pad - update pad mask
+ * @q: the request queue for the device
+ * @mask: pad mask
+ *
+ * Update dma pad mask.
*
+ * Appending pad buffer to a request modifies the last entry of a
+ * scatter list such that it includes the pad buffer.
+ **/
+void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask)
+{
+ if (mask > q->dma_pad_mask)
+ q->dma_pad_mask = mask;
+}
+EXPORT_SYMBOL(blk_queue_update_dma_pad);
+
+/**
+ * blk_queue_dma_drain - Set up a drain buffer for excess dma.
* @q: the request queue for the device
* @dma_drain_needed: fn which returns non-zero if drain is necessary
* @buf: physically contiguous buffer
* device can support otherwise there won't be room for the drain
* buffer.
*/
-extern int blk_queue_dma_drain(struct request_queue *q,
+int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size)
{
{
if (mask < PAGE_CACHE_SIZE - 1) {
mask = PAGE_CACHE_SIZE - 1;
- printk(KERN_INFO "%s: set to minimum %lx\n", __FUNCTION__,
- mask);
+ printk(KERN_INFO "%s: set to minimum %lx\n",
+ __func__, mask);
}
q->seg_boundary_mask = mask;
* @mask: alignment mask
*
* description:
- * set required memory and length aligment for direct dma transactions.
+ * set required memory and length alignment for direct dma transactions.
* this is used when buiding direct io requests for the queue.
*
**/
* @mask: alignment mask
*
* description:
- * update required memory and length aligment for direct dma transactions.
+ * update required memory and length alignment for direct dma transactions.
* If the requested alignment is larger than the current alignment, then
* the current queue alignment is updated to the new value, otherwise it
* is left alone. The design of this is to allow multiple objects
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff