#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
+unsigned int pci_early_dump_regs;
static int pci_bf_sort;
int pci_routeirq;
+int noioapicquirk;
+#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+int noioapicreroute = 0;
+#else
+int noioapicreroute = 1;
+#endif
int pcibios_last_bus = -1;
unsigned long pirq_table_addr;
struct pci_bus *pci_root_bus;
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val)
{
- if (reg < 256 && raw_pci_ops)
+ if (domain == 0 && reg < 256 && raw_pci_ops)
return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
if (raw_pci_ext_ops)
return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val)
{
- if (reg < 256 && raw_pci_ops)
+ if (domain == 0 && reg < 256 && raw_pci_ops)
return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
if (raw_pci_ext_ops)
return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
};
/*
- * legacy, numa, and acpi all want to call pcibios_scan_root
- * from their initcalls. This flag prevents that.
- */
-int pcibios_scanned;
-
-/*
* This interrupt-safe spinlock protects all accesses to PCI
* configuration space.
*/
DEFINE_SPINLOCK(pci_config_lock);
+static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
+{
+ pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+ printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
+ return 0;
+}
+
+static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitconst = {
/*
- * Several buggy motherboards address only 16 devices and mirror
- * them to next 16 IDs. We try to detect this `feature' on all
- * primary buses (those containing host bridges as they are
- * expected to be unique) and remove the ghost devices.
+ * Systems where PCI IO resource ISA alignment can be skipped
+ * when the ISA enable bit in the bridge control is not set
*/
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+ },
+ },
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3850",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+ },
+ },
+ {
+ .callback = can_skip_ioresource_align,
+ .ident = "IBM System x3950",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+ },
+ },
+ {}
+};
-static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
+void __init dmi_check_skip_isa_align(void)
{
- struct list_head *ln, *mn;
- struct pci_dev *d, *e;
- int mirror = PCI_DEVFN(16,0);
- int seen_host_bridge = 0;
- int i;
-
- DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
- list_for_each(ln, &b->devices) {
- d = pci_dev_b(ln);
- if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
- seen_host_bridge++;
- for (mn=ln->next; mn != &b->devices; mn=mn->next) {
- e = pci_dev_b(mn);
- if (e->devfn != d->devfn + mirror ||
- e->vendor != d->vendor ||
- e->device != d->device ||
- e->class != d->class)
- continue;
- for(i=0; i<PCI_NUM_RESOURCES; i++)
- if (e->resource[i].start != d->resource[i].start ||
- e->resource[i].end != d->resource[i].end ||
- e->resource[i].flags != d->resource[i].flags)
- continue;
- break;
- }
- if (mn == &b->devices)
- return;
- }
- if (!seen_host_bridge)
- return;
- printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
-
- ln = &b->devices;
- while (ln->next != &b->devices) {
- d = pci_dev_b(ln->next);
- if (d->devfn >= mirror) {
- list_del(&d->global_list);
- list_del(&d->bus_list);
- kfree(d);
- } else
- ln = ln->next;
- }
+ dmi_check_system(can_skip_pciprobe_dmi_table);
}
static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
{
struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
- if (rom_r->parent)
- return;
- if (rom_r->start)
- /* we deal with BIOS assigned ROM later */
- return;
- if (!(pci_probe & PCI_ASSIGN_ROMS))
+ if (pci_probe & PCI_NOASSIGN_ROMS) {
+ if (rom_r->parent)
+ return;
+ if (rom_r->start) {
+ /* we deal with BIOS assigned ROM later */
+ return;
+ }
rom_r->start = rom_r->end = rom_r->flags = 0;
+ }
}
/*
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
- pcibios_fixup_ghosts(b);
+ /* root bus? */
+ if (!b->parent)
+ x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
}
#endif
-static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
+static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
#ifdef __i386__
/*
* Laptops which need pci=assign-busses to see Cardbus cards
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
#ifdef __i386__
{}
};
+void __init dmi_check_pciprobe(void)
+{
+ dmi_check_system(pciprobe_dmi_table);
+}
+
struct pci_bus * __devinit pcibios_scan_root(int busnum)
{
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
- dmi_check_system(pciprobe_dmi_table);
-
while ((bus = pci_find_next_bus(bus)) != NULL) {
if (bus->number == busnum) {
/* Already scanned */
return NULL;
}
+ sd->node = get_mp_bus_to_node(busnum);
+
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+ bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ if (!bus)
+ kfree(sd);
- return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
+ return bus;
}
-extern u8 pci_cache_line_size;
-
-static int __init pcibios_init(void)
+int __init pcibios_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
}
/*
- * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
- * and P4. It's also good for 386/486s (which actually have 16)
+ * Set PCI cacheline size to that of the CPU if the CPU has reported it.
+ * (For older CPUs that don't support cpuid, we se it to 32 bytes
+ * It's also good for 386/486s (which actually have 16)
* as quite a few PCI devices do not support smaller values.
*/
- pci_cache_line_size = 32 >> 2;
- if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
- pci_cache_line_size = 64 >> 2; /* K7 & K8 */
- else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
- pci_cache_line_size = 128 >> 2; /* P4 */
+ if (c->x86_clflush_size > 0) {
+ pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
+ printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
+ pci_dfl_cache_line_size << 2);
+ } else {
+ pci_dfl_cache_line_size = 32 >> 2;
+ printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
+ }
pcibios_resource_survey();
if (pci_bf_sort >= pci_force_bf)
pci_sort_breadthfirst();
-#ifdef CONFIG_PCI_BIOS
- if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
- pcibios_sort();
-#endif
return 0;
}
-subsys_initcall(pcibios_init);
-
char * __devinit pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
} else if (!strcmp(str, "nobios")) {
pci_probe &= ~PCI_PROBE_BIOS;
return NULL;
- } else if (!strcmp(str, "nosort")) {
- pci_probe |= PCI_NO_SORT;
- return NULL;
} else if (!strcmp(str, "biosirq")) {
pci_probe |= PCI_BIOS_IRQ_SCAN;
return NULL;
pci_probe &= ~PCI_PROBE_MMCONF;
return NULL;
}
+ else if (!strcmp(str, "check_enable_amd_mmconf")) {
+ pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
+ return NULL;
+ }
#endif
else if (!strcmp(str, "noacpi")) {
acpi_noirq_set();
else if (!strcmp(str, "rom")) {
pci_probe |= PCI_ASSIGN_ROMS;
return NULL;
+ } else if (!strcmp(str, "norom")) {
+ pci_probe |= PCI_NOASSIGN_ROMS;
+ return NULL;
} else if (!strcmp(str, "assign-busses")) {
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
return NULL;
} else if (!strcmp(str, "use_crs")) {
pci_probe |= PCI_USE__CRS;
return NULL;
+ } else if (!strcmp(str, "nocrs")) {
+ pci_probe |= PCI_ROOT_NO_CRS;
+ return NULL;
+ } else if (!strcmp(str, "earlydump")) {
+ pci_early_dump_regs = 1;
+ return NULL;
} else if (!strcmp(str, "routeirq")) {
pci_routeirq = 1;
return NULL;
+ } else if (!strcmp(str, "skip_isa_align")) {
+ pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+ return NULL;
+ } else if (!strcmp(str, "noioapicquirk")) {
+ noioapicquirk = 1;
+ return NULL;
+ } else if (!strcmp(str, "ioapicreroute")) {
+ if (noioapicreroute != -1)
+ noioapicreroute = 0;
+ return NULL;
+ } else if (!strcmp(str, "noioapicreroute")) {
+ if (noioapicreroute != -1)
+ noioapicreroute = 1;
+ return NULL;
}
return str;
}
{
int err;
- if ((err = pcibios_enable_resources(dev, mask)) < 0)
+ if ((err = pci_enable_resources(dev, mask)) < 0)
return err;
- if (!dev->msi_enabled)
+ if (!pci_dev_msi_enabled(dev))
return pcibios_enable_irq(dev);
return 0;
}
void pcibios_disable_device (struct pci_dev *dev)
{
- if (!dev->msi_enabled && pcibios_disable_irq)
+ if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
-struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno)
+int pci_ext_cfg_avail(struct pci_dev *dev)
+{
+ if (raw_pci_ext_ops)
+ return 1;
+ else
+ return 0;
+}
+
+struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
{
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
return NULL;
}
- sd->node = -1;
- bus = pci_scan_bus(busno, &pci_root_ops, sd);
+ sd->node = node;
+ bus = pci_scan_bus(busno, ops, sd);
if (!bus)
kfree(sd);
return bus;
}
+
+struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
+{
+ return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
+}
+
+/*
+ * NUMA info for PCI busses
+ *
+ * Early arch code is responsible for filling in reasonable values here.
+ * A node id of "-1" means "use current node". In other words, if a bus
+ * has a -1 node id, it's not tightly coupled to any particular chunk
+ * of memory (as is the case on some Nehalem systems).
+ */
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR] = {
+ [0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+ if (busnum >= 0 && busnum < BUS_NR)
+ mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+ int node = -1;
+
+ if (busnum < 0 || busnum > (BUS_NR - 1))
+ return node;
+
+ node = mp_bus_to_node[busnum];
+
+ /*
+ * let numa_node_id to decide it later in dma_alloc_pages
+ * if there is no ram on that node
+ */
+ if (node != -1 && !node_online(node))
+ node = -1;
+
+ return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static int mp_bus_to_node[BUS_NR] = {
+ [0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+ if (busnum >= 0 && busnum < BUS_NR)
+ mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+ int node;
+
+ if (busnum < 0 || busnum > (BUS_NR - 1))
+ return 0;
+ node = mp_bus_to_node[busnum];
+ return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff