#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
static int pci_bf_sort;
int pci_routeirq;
int noioapicquirk;
+#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+int noioapicreroute = 0;
+#else
int noioapicreroute = 1;
+#endif
int pcibios_last_bus = -1;
unsigned long pirq_table_addr;
struct pci_bus *pci_root_bus;
};
/*
- * legacy, numa, and acpi all want to call pcibios_scan_root
- * from their initcalls. This flag prevents that.
- */
-int pcibios_scanned;
-
-/*
* This interrupt-safe spinlock protects all accesses to PCI
* configuration space.
*/
return 0;
}
-static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
+static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitconst = {
/*
* Systems where PCI IO resource ISA alignment can be skipped
* when the ISA enable bit in the bridge control is not set
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
+ /* root bus? */
+ if (!b->parent)
+ x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
}
#endif
-static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
+static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
#ifdef __i386__
/*
* Laptops which need pci=assign-busses to see Cardbus cards
return bus;
}
-extern u8 pci_cache_line_size;
-
int __init pcibios_init(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
}
/*
- * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8
- * and P4. It's also good for 386/486s (which actually have 16)
+ * Set PCI cacheline size to that of the CPU if the CPU has reported it.
+ * (For older CPUs that don't support cpuid, we se it to 32 bytes
+ * It's also good for 386/486s (which actually have 16)
* as quite a few PCI devices do not support smaller values.
*/
- pci_cache_line_size = 32 >> 2;
- if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD)
- pci_cache_line_size = 64 >> 2; /* K7 & K8 */
- else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL)
- pci_cache_line_size = 128 >> 2; /* P4 */
+ if (c->x86_clflush_size > 0) {
+ pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
+ printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
+ pci_dfl_cache_line_size << 2);
+ } else {
+ pci_dfl_cache_line_size = 32 >> 2;
+ printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
+ }
pcibios_resource_survey();
} else if (!strcmp(str, "use_crs")) {
pci_probe |= PCI_USE__CRS;
return NULL;
+ } else if (!strcmp(str, "nocrs")) {
+ pci_probe |= PCI_ROOT_NO_CRS;
+ return NULL;
} else if (!strcmp(str, "earlydump")) {
pci_early_dump_regs = 1;
return NULL;
if (noioapicreroute != -1)
noioapicreroute = 0;
return NULL;
+ } else if (!strcmp(str, "noioapicreroute")) {
+ if (noioapicreroute != -1)
+ noioapicreroute = 1;
+ return NULL;
}
return str;
}
if ((err = pci_enable_resources(dev, mask)) < 0)
return err;
- if (!dev->msi_enabled)
+ if (!pci_dev_msi_enabled(dev))
return pcibios_enable_irq(dev);
return 0;
}
void pcibios_disable_device (struct pci_dev *dev)
{
- if (!dev->msi_enabled && pcibios_disable_irq)
+ if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
+int pci_ext_cfg_avail(struct pci_dev *dev)
+{
+ if (raw_pci_ext_ops)
+ return 1;
+ else
+ return 0;
+}
+
struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
{
struct pci_bus *bus = NULL;
{
return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
}
+
+/*
+ * NUMA info for PCI busses
+ *
+ * Early arch code is responsible for filling in reasonable values here.
+ * A node id of "-1" means "use current node". In other words, if a bus
+ * has a -1 node id, it's not tightly coupled to any particular chunk
+ * of memory (as is the case on some Nehalem systems).
+ */
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR] = {
+ [0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+ if (busnum >= 0 && busnum < BUS_NR)
+ mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+ int node = -1;
+
+ if (busnum < 0 || busnum > (BUS_NR - 1))
+ return node;
+
+ node = mp_bus_to_node[busnum];
+
+ /*
+ * let numa_node_id to decide it later in dma_alloc_pages
+ * if there is no ram on that node
+ */
+ if (node != -1 && !node_online(node))
+ node = -1;
+
+ return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static int mp_bus_to_node[BUS_NR] = {
+ [0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+ if (busnum >= 0 && busnum < BUS_NR)
+ mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+ int node;
+
+ if (busnum < 0 || busnum > (BUS_NR - 1))
+ return 0;
+ node = mp_bus_to_node[busnum];
+ return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */