/*
* @file op_model_ppro.h
- * pentium pro / P6 model-specific MSR operations
+ * Family 6 perfmon and architectural perfmon MSR operations
*
* @remark Copyright 2002 OProfile authors
+ * @remark Copyright 2008 Intel Corporation
* @remark Read the file COPYING
*
* @author John Levon
* @author Philippe Elie
* @author Graydon Hoare
+ * @author Andi Kleen
*/
#include <linux/oprofile.h>
+#include <linux/slab.h>
#include <asm/ptrace.h>
#include <asm/msr.h>
#include <asm/apic.h>
#include <asm/nmi.h>
+#include <asm/intel_arch_perfmon.h>
#include "op_x86_model.h"
#include "op_counter.h"
-#define NUM_COUNTERS 2
-#define NUM_CONTROLS 2
+static int num_counters = 2;
+static int counter_width = 32;
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_32BIT_WRITE(l, msrs, c) \
- do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
+#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
#define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
#define CTRL_SET_EVENT(val, e) (val |= e)
-static unsigned long reset_value[NUM_COUNTERS];
+static u64 *reset_value;
static void ppro_fill_in_addresses(struct op_msrs * const msrs)
{
int i;
- for (i = 0; i < NUM_COUNTERS; i++) {
+ for (i = 0; i < num_counters; i++) {
if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
else
msrs->counters[i].addr = 0;
}
- for (i = 0; i < NUM_CONTROLS; i++) {
+ for (i = 0; i < num_counters; i++) {
if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
else
unsigned int low, high;
int i;
+ if (!reset_value) {
+ reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
+ GFP_ATOMIC);
+ if (!reset_value)
+ return;
+ }
+
+ if (cpu_has_arch_perfmon) {
+ union cpuid10_eax eax;
+ eax.full = cpuid_eax(0xa);
+
+ /*
+ * For Core2 (family 6, model 15), don't reset the
+ * counter width:
+ */
+ if (!(eax.split.version_id == 0 &&
+ current_cpu_data.x86 == 6 &&
+ current_cpu_data.x86_model == 15)) {
+
+ if (counter_width < eax.split.bit_width)
+ counter_width = eax.split.bit_width;
+ }
+ }
+
/* clear all counters */
- for (i = 0 ; i < NUM_CONTROLS; ++i) {
+ for (i = 0 ; i < num_counters; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
CTRL_READ(low, high, msrs, i);
}
/* avoid a false detection of ctr overflows in NMI handler */
- for (i = 0; i < NUM_COUNTERS; ++i) {
+ for (i = 0; i < num_counters; ++i) {
if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
- CTR_32BIT_WRITE(1, msrs, i);
+ wrmsrl(msrs->counters[i].addr, -1LL);
}
/* enable active counters */
- for (i = 0; i < NUM_COUNTERS; ++i) {
+ for (i = 0; i < num_counters; ++i) {
if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
- CTR_32BIT_WRITE(counter_config[i].count, msrs, i);
+ wrmsrl(msrs->counters[i].addr, -reset_value[i]);
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR(low);
static int ppro_check_ctrs(struct pt_regs * const regs,
struct op_msrs const * const msrs)
{
- unsigned int low, high;
+ u64 val;
int i;
- for (i = 0 ; i < NUM_COUNTERS; ++i) {
+ for (i = 0 ; i < num_counters; ++i) {
if (!reset_value[i])
continue;
- CTR_READ(low, high, msrs, i);
- if (CTR_OVERFLOWED(low)) {
+ rdmsrl(msrs->counters[i].addr, val);
+ if (CTR_OVERFLOWED(val)) {
oprofile_add_sample(regs, i);
- CTR_32BIT_WRITE(reset_value[i], msrs, i);
+ wrmsrl(msrs->counters[i].addr, -reset_value[i]);
}
}
unsigned int low, high;
int i;
- for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (!reset_value)
+ return;
+ for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
CTRL_SET_ACTIVE(low);
unsigned int low, high;
int i;
- for (i = 0; i < NUM_COUNTERS; ++i) {
+ if (!reset_value)
+ return;
+ for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
CTRL_READ(low, high, msrs, i);
{
int i;
- for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+ for (i = 0 ; i < num_counters ; ++i) {
if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
}
- for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+ for (i = 0 ; i < num_counters ; ++i) {
if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
}
+ if (reset_value) {
+ kfree(reset_value);
+ reset_value = NULL;
+ }
}
struct op_x86_model_spec const op_ppro_spec = {
- .num_counters = NUM_COUNTERS,
- .num_controls = NUM_CONTROLS,
- .fill_in_addresses = &ppro_fill_in_addresses,
- .setup_ctrs = &ppro_setup_ctrs,
- .check_ctrs = &ppro_check_ctrs,
- .start = &ppro_start,
- .stop = &ppro_stop,
- .shutdown = &ppro_shutdown
+ .num_counters = 2,
+ .num_controls = 2,
+ .fill_in_addresses = &ppro_fill_in_addresses,
+ .setup_ctrs = &ppro_setup_ctrs,
+ .check_ctrs = &ppro_check_ctrs,
+ .start = &ppro_start,
+ .stop = &ppro_stop,
+ .shutdown = &ppro_shutdown
+};
+
+/*
+ * Architectural performance monitoring.
+ *
+ * Newer Intel CPUs (Core1+) have support for architectural
+ * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
+ * The advantage of this is that it can be done without knowing about
+ * the specific CPU.
+ */
+
+static void arch_perfmon_setup_counters(void)
+{
+ union cpuid10_eax eax;
+
+ eax.full = cpuid_eax(0xa);
+
+ /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
+ if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
+ current_cpu_data.x86_model == 15) {
+ eax.split.version_id = 2;
+ eax.split.num_counters = 2;
+ eax.split.bit_width = 40;
+ }
+
+ num_counters = eax.split.num_counters;
+
+ op_arch_perfmon_spec.num_counters = num_counters;
+ op_arch_perfmon_spec.num_controls = num_counters;
+}
+
+static int arch_perfmon_init(struct oprofile_operations *ignore)
+{
+ arch_perfmon_setup_counters();
+ return 0;
+}
+
+struct op_x86_model_spec op_arch_perfmon_spec = {
+ .init = &arch_perfmon_init,
+ /* num_counters/num_controls filled in at runtime */
+ .fill_in_addresses = &ppro_fill_in_addresses,
+ /* user space does the cpuid check for available events */
+ .setup_ctrs = &ppro_setup_ctrs,
+ .check_ctrs = &ppro_check_ctrs,
+ .start = &ppro_start,
+ .stop = &ppro_stop,
+ .shutdown = &ppro_shutdown
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff