#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <asm/vmi.h>
#include <asm/io.h>
#include <asm/fixmap.h>
#include <asm/apicdef.h>
#include <asm/apic.h>
+#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/timer.h>
#include <asm/vmi_time.h>
#include <asm/kmap_types.h>
+#include <asm/setup.h>
/* Convenient for calling VMI functions indirectly in the ROM */
typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
const void *desc)
{
u32 *ldt_entry = (u32 *)desc;
- vmi_ops.write_idt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
+ vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
}
static void vmi_load_sp0(struct tss_struct *tss,
{
}
-#ifdef CONFIG_DEBUG_PAGE_TYPE
-
-#ifdef CONFIG_X86_PAE
-#define MAX_BOOT_PTS (2048+4+1)
-#else
-#define MAX_BOOT_PTS (1024+1)
-#endif
-
-/*
- * During boot, mem_map is not yet available in paging_init, so stash
- * all the boot page allocations here.
- */
-static struct {
- u32 pfn;
- int type;
-} boot_page_allocations[MAX_BOOT_PTS];
-static int num_boot_page_allocations;
-static int boot_allocations_applied;
-
-void vmi_apply_boot_page_allocations(void)
-{
- int i;
- BUG_ON(!mem_map);
- for (i = 0; i < num_boot_page_allocations; i++) {
- struct page *page = pfn_to_page(boot_page_allocations[i].pfn);
- page->type = boot_page_allocations[i].type;
- page->type = boot_page_allocations[i].type &
- ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
- }
- boot_allocations_applied = 1;
-}
-
-static void record_page_type(u32 pfn, int type)
-{
- BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS);
- boot_page_allocations[num_boot_page_allocations].pfn = pfn;
- boot_page_allocations[num_boot_page_allocations].type = type;
- num_boot_page_allocations++;
-}
-
-static void check_zeroed_page(u32 pfn, int type, struct page *page)
-{
- u32 *ptr;
- int i;
- int limit = PAGE_SIZE / sizeof(int);
-
- if (page_address(page))
- ptr = (u32 *)page_address(page);
- else
- ptr = (u32 *)__va(pfn << PAGE_SHIFT);
- /*
- * When cloning the root in non-PAE mode, only the userspace
- * pdes need to be zeroed.
- */
- if (type & VMI_PAGE_CLONE)
- limit = KERNEL_PGD_BOUNDARY;
- for (i = 0; i < limit; i++)
- BUG_ON(ptr[i]);
-}
-
-/*
- * We stash the page type into struct page so we can verify the page
- * types are used properly.
- */
-static void vmi_set_page_type(u32 pfn, int type)
+static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
{
- /* PAE can have multiple roots per page - don't track */
- if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
- return;
-
- if (boot_allocations_applied) {
- struct page *page = pfn_to_page(pfn);
- if (type != VMI_PAGE_NORMAL)
- BUG_ON(page->type);
- else
- BUG_ON(page->type == VMI_PAGE_NORMAL);
- page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
- if (type & VMI_PAGE_ZEROED)
- check_zeroed_page(pfn, type, page);
- } else {
- record_page_type(pfn, type);
- }
-}
-
-static void vmi_check_page_type(u32 pfn, int type)
-{
- /* PAE can have multiple roots per page - skip checks */
- if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
- return;
-
- type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
- if (boot_allocations_applied) {
- struct page *page = pfn_to_page(pfn);
- BUG_ON((page->type ^ type) & VMI_PAGE_PAE);
- BUG_ON(type == VMI_PAGE_NORMAL && page->type);
- BUG_ON((type & page->type) == 0);
- }
-}
-#else
-#define vmi_set_page_type(p,t) do { } while (0)
-#define vmi_check_page_type(p,t) do { } while (0)
-#endif
-
-#ifdef CONFIG_HIGHPTE
-static void *vmi_kmap_atomic_pte(struct page *page, enum km_type type)
-{
- void *va = kmap_atomic(page, type);
-
- /*
- * Internally, the VMI ROM must map virtual addresses to physical
- * addresses for processing MMU updates. By the time MMU updates
- * are issued, this information is typically already lost.
- * Fortunately, the VMI provides a cache of mapping slots for active
- * page tables.
- *
- * We use slot zero for the linear mapping of physical memory, and
- * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
- *
- * args: SLOT VA COUNT PFN
- */
- BUG_ON(type != KM_PTE0 && type != KM_PTE1);
- vmi_ops.set_linear_mapping((type - KM_PTE0)+1, va, 1, page_to_pfn(page));
-
- return va;
-}
-#endif
-
-static void vmi_allocate_pte(struct mm_struct *mm, u32 pfn)
-{
- vmi_set_page_type(pfn, VMI_PAGE_L1);
vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
}
-static void vmi_allocate_pmd(struct mm_struct *mm, u32 pfn)
+static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
{
/*
* This call comes in very early, before mem_map is setup.
* It is called only for swapper_pg_dir, which already has
* data on it.
*/
- vmi_set_page_type(pfn, VMI_PAGE_L2);
vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
}
-static void vmi_allocate_pmd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
+static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
{
- vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
- vmi_check_page_type(clonepfn, VMI_PAGE_L2);
vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
}
-static void vmi_release_pte(u32 pfn)
+static void vmi_release_pte(unsigned long pfn)
{
vmi_ops.release_page(pfn, VMI_PAGE_L1);
- vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
}
-static void vmi_release_pmd(u32 pfn)
+static void vmi_release_pmd(unsigned long pfn)
{
vmi_ops.release_page(pfn, VMI_PAGE_L2);
- vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
+}
+
+/*
+ * We use the pgd_free hook for releasing the pgd page:
+ */
+static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
+
+ vmi_ops.release_page(pfn, VMI_PAGE_L2);
}
/*
static void vmi_update_pte(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
}
static void vmi_update_pte_defer(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0));
}
static void vmi_set_pte(pte_t *ptep, pte_t pte)
{
/* XXX because of set_pmd_pte, this can be called on PT or PD layers */
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD);
vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT);
}
static void vmi_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
{
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
}
{
#ifdef CONFIG_X86_PAE
const pte_t pte = { .pte = pmdval.pmd };
- vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD);
#else
const pte_t pte = { pmdval.pud.pgd.pgd };
- vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD);
#endif
vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD);
}
vmi_ops.update_pte(ptep, VMI_PAGE_PT);
}
-static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
-{
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
- vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1));
-}
-
static void vmi_set_pud(pud_t *pudp, pud_t pudval)
{
/* Um, eww */
const pte_t pte = { .pte = pudval.pgd.pgd };
- vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD);
vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP);
}
static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
const pte_t pte = { .pte = 0 };
- vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
}
static void vmi_pmd_clear(pmd_t *pmd)
{
const pte_t pte = { .pte = 0 };
- vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD);
vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD);
}
#endif
ap.ds = __USER_DS;
ap.es = __USER_DS;
ap.fs = __KERNEL_PERCPU;
- ap.gs = 0;
+ ap.gs = __KERNEL_STACK_CANARY;
ap.eflags = 0;
}
#endif
-static void vmi_enter_lazy_cpu(void)
+static void vmi_start_context_switch(struct task_struct *prev)
{
- paravirt_enter_lazy_cpu();
+ paravirt_start_context_switch(prev);
vmi_ops.set_lazy_mode(2);
}
+static void vmi_end_context_switch(struct task_struct *next)
+{
+ vmi_ops.set_lazy_mode(0);
+ paravirt_end_context_switch(next);
+}
+
static void vmi_enter_lazy_mmu(void)
{
paravirt_enter_lazy_mmu();
vmi_ops.set_lazy_mode(1);
}
-static void vmi_leave_lazy(void)
+static void vmi_leave_lazy_mmu(void)
{
- paravirt_leave_lazy(paravirt_get_lazy_mode());
vmi_ops.set_lazy_mode(0);
+ paravirt_leave_lazy_mmu();
}
static inline int __init check_vmi_rom(struct vrom_header *rom)
{
/* We must establish the lowmem mapping for MMU ops to work */
if (vmi_ops.set_linear_mapping)
- vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, max_low_pfn, 0);
+ vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
}
/*
u64 reloc;
const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
+ /*
+ * Prevent page tables from being allocated in highmem, even if
+ * CONFIG_HIGHPTE is enabled.
+ */
+ __userpte_alloc_gfp &= ~__GFP_HIGHMEM;
+
if (call_vrom_func(vmi_rom, vmi_init) != 0) {
printk(KERN_ERR "VMI ROM failed to initialize!");
return 0;
pv_info.paravirt_enabled = 1;
pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
- pv_info.name = "vmi";
+ pv_info.name = "vmi [deprecated]";
pv_init_ops.patch = vmi_patch;
para_fill(pv_mmu_ops.write_cr2, SetCR2);
para_fill(pv_mmu_ops.write_cr3, SetCR3);
para_fill(pv_cpu_ops.write_cr4, SetCR4);
- para_fill(pv_irq_ops.save_fl, GetInterruptMask);
- para_fill(pv_irq_ops.restore_fl, SetInterruptMask);
- para_fill(pv_irq_ops.irq_disable, DisableInterrupts);
- para_fill(pv_irq_ops.irq_enable, EnableInterrupts);
+
+ para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
+ para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
+ para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
+ para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
para_fill(pv_cpu_ops.wbinvd, WBINVD);
para_fill(pv_cpu_ops.read_tsc, RDTSC);
para_fill(pv_cpu_ops.set_iopl_mask, SetIOPLMask);
para_fill(pv_cpu_ops.io_delay, IODelay);
- para_wrap(pv_cpu_ops.lazy_mode.enter, vmi_enter_lazy_cpu,
+ para_wrap(pv_cpu_ops.start_context_switch, vmi_start_context_switch,
set_lazy_mode, SetLazyMode);
- para_wrap(pv_cpu_ops.lazy_mode.leave, vmi_leave_lazy,
+ para_wrap(pv_cpu_ops.end_context_switch, vmi_end_context_switch,
set_lazy_mode, SetLazyMode);
para_wrap(pv_mmu_ops.lazy_mode.enter, vmi_enter_lazy_mmu,
set_lazy_mode, SetLazyMode);
- para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy,
+ para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy_mmu,
set_lazy_mode, SetLazyMode);
/* user and kernel flush are just handled with different flags to FlushTLB */
pv_mmu_ops.set_pmd = vmi_set_pmd;
#ifdef CONFIG_X86_PAE
pv_mmu_ops.set_pte_atomic = vmi_set_pte_atomic;
- pv_mmu_ops.set_pte_present = vmi_set_pte_present;
pv_mmu_ops.set_pud = vmi_set_pud;
pv_mmu_ops.pte_clear = vmi_pte_clear;
pv_mmu_ops.pmd_clear = vmi_pmd_clear;
if (vmi_ops.release_page) {
pv_mmu_ops.release_pte = vmi_release_pte;
pv_mmu_ops.release_pmd = vmi_release_pmd;
+ pv_mmu_ops.pgd_free = vmi_pgd_free;
}
/* Set linear is needed in all cases */
vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-#ifdef CONFIG_HIGHPTE
- if (vmi_ops.set_linear_mapping)
- pv_mmu_ops.kmap_atomic_pte = vmi_kmap_atomic_pte;
-#endif
/*
* These MUST always be patched. Don't support indirect jumps
#endif
#ifdef CONFIG_X86_LOCAL_APIC
- para_fill(apic_ops->read, APICRead);
- para_fill(apic_ops->write, APICWrite);
+ para_fill(apic->read, APICRead);
+ para_fill(apic->write, APICWrite);
#endif
/*
vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
vmi_timer_ops.cancel_alarm =
vmi_get_function(VMI_CALL_CancelAlarm);
- pv_time_ops.time_init = vmi_time_init;
- pv_time_ops.get_wallclock = vmi_get_wallclock;
- pv_time_ops.set_wallclock = vmi_set_wallclock;
+ x86_init.timers.timer_init = vmi_time_init;
#ifdef CONFIG_X86_LOCAL_APIC
- pv_apic_ops.setup_boot_clock = vmi_time_bsp_init;
- pv_apic_ops.setup_secondary_clock = vmi_time_ap_init;
+ x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init;
+ x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
#endif
pv_time_ops.sched_clock = vmi_sched_clock;
- pv_time_ops.get_tsc_khz = vmi_tsc_khz;
+ x86_platform.calibrate_tsc = vmi_tsc_khz;
+ x86_platform.get_wallclock = vmi_get_wallclock;
+ x86_platform.set_wallclock = vmi_set_wallclock;
/* We have true wallclock functions; disable CMOS clock sync */
no_sync_cmos_clock = 1;
void __init vmi_init(void)
{
- unsigned long flags;
-
if (!vmi_rom)
probe_vmi_rom();
else
reserve_top_address(-vmi_rom->virtual_top);
- local_irq_save(flags);
- activate_vmi();
-
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
+}
+
+void __init vmi_activate(void)
+{
+ unsigned long flags;
+
+ if (!vmi_rom)
+ return;
+
+ local_irq_save(flags);
+ activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}