#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/percpu.h>
+#include <linux/timex.h>
#include <asm/hpet.h>
#include <asm/timer.h>
#include <asm/vgtod.h>
#include <asm/time.h>
#include <asm/delay.h>
+#include <asm/hypervisor.h>
+#include <asm/nmi.h>
+#include <asm/x86_init.h>
-unsigned int cpu_khz; /* TSC clocks / usec, not used here */
+unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */
EXPORT_SYMBOL(cpu_khz);
-unsigned int tsc_khz;
+
+unsigned int __read_mostly tsc_khz;
EXPORT_SYMBOL(tsc_khz);
/*
* TSC can be unstable due to cpufreq or due to unsynced TSCs
*/
-static int tsc_unstable;
+static int __read_mostly tsc_unstable;
/* native_sched_clock() is called before tsc_init(), so
we must start with the TSC soft disabled to prevent
erroneous rdtsc usage on !cpu_has_tsc processors */
-static int tsc_disabled = -1;
+static int __read_mostly tsc_disabled = -1;
+static int tsc_clocksource_reliable;
/*
* Scheduler clock - returns current time in nanosec units.
*/
* unstable. We do this because unlike Time Of Day,
* the scheduler clock tolerates small errors and it's
* very important for it to be as fast as the platform
- * can achive it. )
+ * can achieve it. )
*/
if (unlikely(tsc_disabled)) {
/* No locking but a rare wrong value is not a big deal: */
rdtscll(this_offset);
/* return the value in ns */
- return cycles_2_ns(this_offset);
+ return __cycles_2_ns(this_offset);
}
/* We need to define a real function for sched_clock, to override the
__setup("notsc", notsc_setup);
+static int __init tsc_setup(char *str)
+{
+ if (!strcmp(str, "reliable"))
+ tsc_clocksource_reliable = 1;
+ return 1;
+}
+
+__setup("tsc=", tsc_setup);
+
#define MAX_RETRIES 5
#define SMI_TRESHOLD 50000
/*
* Read TSC and the reference counters. Take care of SMI disturbance
*/
-static u64 tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *p, int hpet)
{
u64 t1, t2;
int i;
for (i = 0; i < MAX_RETRIES; i++) {
t1 = get_cycles();
if (hpet)
- *hpet = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
+ *p = hpet_readl(HPET_COUNTER) & 0xFFFFFFFF;
else
- *pm = acpi_pm_read_early();
+ *p = acpi_pm_read_early();
t2 = get_cycles();
if ((t2 - t1) < SMI_TRESHOLD)
return t2;
return (unsigned long) deltatsc;
}
-#define CAL_MS 50
+#define CAL_MS 10
#define CAL_LATCH (CLOCK_TICK_RATE / (1000 / CAL_MS))
-#define CAL_PIT_LOOPS 5000
+#define CAL_PIT_LOOPS 1000
+
+#define CAL2_MS 50
+#define CAL2_LATCH (CLOCK_TICK_RATE / (1000 / CAL2_MS))
+#define CAL2_PIT_LOOPS 5000
+
/*
* Try to calibrate the TSC against the Programmable
*
* Return ULONG_MAX on failure to calibrate.
*/
-static unsigned long pit_calibrate_tsc(void)
+static unsigned long pit_calibrate_tsc(u32 latch, unsigned long ms, int loopmin)
{
u64 tsc, t1, t2, delta;
unsigned long tscmin, tscmax;
* (LSB then MSB) to begin countdown.
*/
outb(0xb0, 0x43);
- outb(CAL_LATCH & 0xff, 0x42);
- outb(CAL_LATCH >> 8, 0x42);
+ outb(latch & 0xff, 0x42);
+ outb(latch >> 8, 0x42);
tsc = t1 = t2 = get_cycles();
/*
* Sanity checks:
*
- * If we were not able to read the PIT more than PIT_MIN_LOOPS
+ * If we were not able to read the PIT more than loopmin
* times, then we have been hit by a massive SMI
*
* If the maximum is 10 times larger than the minimum,
* then we got hit by an SMI as well.
*/
- if (pitcnt < CAL_PIT_LOOPS || tscmax > 10 * tscmin)
+ if (pitcnt < loopmin || tscmax > 10 * tscmin)
return ULONG_MAX;
/* Calculate the PIT value */
delta = t2 - t1;
- do_div(delta, CAL_MS);
+ do_div(delta, ms);
return delta;
}
+/*
+ * This reads the current MSB of the PIT counter, and
+ * checks if we are running on sufficiently fast and
+ * non-virtualized hardware.
+ *
+ * Our expectations are:
+ *
+ * - the PIT is running at roughly 1.19MHz
+ *
+ * - each IO is going to take about 1us on real hardware,
+ * but we allow it to be much faster (by a factor of 10) or
+ * _slightly_ slower (ie we allow up to a 2us read+counter
+ * update - anything else implies a unacceptably slow CPU
+ * or PIT for the fast calibration to work.
+ *
+ * - with 256 PIT ticks to read the value, we have 214us to
+ * see the same MSB (and overhead like doing a single TSC
+ * read per MSB value etc).
+ *
+ * - We're doing 2 reads per loop (LSB, MSB), and we expect
+ * them each to take about a microsecond on real hardware.
+ * So we expect a count value of around 100. But we'll be
+ * generous, and accept anything over 50.
+ *
+ * - if the PIT is stuck, and we see *many* more reads, we
+ * return early (and the next caller of pit_expect_msb()
+ * then consider it a failure when they don't see the
+ * next expected value).
+ *
+ * These expectations mean that we know that we have seen the
+ * transition from one expected value to another with a fairly
+ * high accuracy, and we didn't miss any events. We can thus
+ * use the TSC value at the transitions to calculate a pretty
+ * good value for the TSC frequencty.
+ */
+static inline int pit_verify_msb(unsigned char val)
+{
+ /* Ignore LSB */
+ inb(0x42);
+ return inb(0x42) == val;
+}
+
+static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
+{
+ int count;
+ u64 tsc = 0;
+
+ for (count = 0; count < 50000; count++) {
+ if (!pit_verify_msb(val))
+ break;
+ tsc = get_cycles();
+ }
+ *deltap = get_cycles() - tsc;
+ *tscp = tsc;
+
+ /*
+ * We require _some_ success, but the quality control
+ * will be based on the error terms on the TSC values.
+ */
+ return count > 5;
+}
+
+/*
+ * How many MSB values do we want to see? We aim for
+ * a maximum error rate of 500ppm (in practice the
+ * real error is much smaller), but refuse to spend
+ * more than 25ms on it.
+ */
+#define MAX_QUICK_PIT_MS 25
+#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+
+static unsigned long quick_pit_calibrate(void)
+{
+ int i;
+ u64 tsc, delta;
+ unsigned long d1, d2;
+
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Counter 2, mode 0 (one-shot), binary count
+ *
+ * NOTE! Mode 2 decrements by two (and then the
+ * output is flipped each time, giving the same
+ * final output frequency as a decrement-by-one),
+ * so mode 0 is much better when looking at the
+ * individual counts.
+ */
+ outb(0xb0, 0x43);
+
+ /* Start at 0xffff */
+ outb(0xff, 0x42);
+ outb(0xff, 0x42);
+
+ /*
+ * The PIT starts counting at the next edge, so we
+ * need to delay for a microsecond. The easiest way
+ * to do that is to just read back the 16-bit counter
+ * once from the PIT.
+ */
+ pit_verify_msb(0);
+
+ if (pit_expect_msb(0xff, &tsc, &d1)) {
+ for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+ if (!pit_expect_msb(0xff-i, &delta, &d2))
+ break;
+
+ /*
+ * Iterate until the error is less than 500 ppm
+ */
+ delta -= tsc;
+ if (d1+d2 >= delta >> 11)
+ continue;
+
+ /*
+ * Check the PIT one more time to verify that
+ * all TSC reads were stable wrt the PIT.
+ *
+ * This also guarantees serialization of the
+ * last cycle read ('d2') in pit_expect_msb.
+ */
+ if (!pit_verify_msb(0xfe - i))
+ break;
+ goto success;
+ }
+ }
+ printk("Fast TSC calibration failed\n");
+ return 0;
+
+success:
+ /*
+ * Ok, if we get here, then we've seen the
+ * MSB of the PIT decrement 'i' times, and the
+ * error has shrunk to less than 500 ppm.
+ *
+ * As a result, we can depend on there not being
+ * any odd delays anywhere, and the TSC reads are
+ * reliable (within the error). We also adjust the
+ * delta to the middle of the error bars, just
+ * because it looks nicer.
+ *
+ * kHz = ticks / time-in-seconds / 1000;
+ * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+ * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+ */
+ delta += (long)(d2 - d1)/2;
+ delta *= PIT_TICK_RATE;
+ do_div(delta, i*256*1000);
+ printk("Fast TSC calibration using PIT\n");
+ return delta;
+}
/**
* native_calibrate_tsc - calibrate the tsc on boot
*/
unsigned long native_calibrate_tsc(void)
{
- u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
+ u64 tsc1, tsc2, delta, ref1, ref2;
unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
- unsigned long flags;
- int hpet = is_hpet_enabled(), i;
+ unsigned long flags, latch, ms, fast_calibrate;
+ int hpet = is_hpet_enabled(), i, loopmin;
+
+ local_irq_save(flags);
+ fast_calibrate = quick_pit_calibrate();
+ local_irq_restore(flags);
+ if (fast_calibrate)
+ return fast_calibrate;
/*
* Run 5 calibration loops to get the lowest frequency value
* calibration delay loop as we have to wait for a certain
* amount of time anyway.
*/
- for (i = 0; i < 5; i++) {
+
+ /* Preset PIT loop values */
+ latch = CAL_LATCH;
+ ms = CAL_MS;
+ loopmin = CAL_PIT_LOOPS;
+
+ for (i = 0; i < 3; i++) {
unsigned long tsc_pit_khz;
/*
* read the end value.
*/
local_irq_save(flags);
- tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
- tsc_pit_khz = pit_calibrate_tsc();
- tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+ tsc1 = tsc_read_refs(&ref1, hpet);
+ tsc_pit_khz = pit_calibrate_tsc(latch, ms, loopmin);
+ tsc2 = tsc_read_refs(&ref2, hpet);
local_irq_restore(flags);
/* Pick the lowest PIT TSC calibration so far */
tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
/* hpet or pmtimer available ? */
- if (!hpet && !pm1 && !pm2)
+ if (!hpet && !ref1 && !ref2)
continue;
/* Check, whether the sampling was disturbed by an SMI */
tsc2 = (tsc2 - tsc1) * 1000000LL;
if (hpet)
- tsc2 = calc_hpet_ref(tsc2, hpet1, hpet2);
+ tsc2 = calc_hpet_ref(tsc2, ref1, ref2);
else
- tsc2 = calc_pmtimer_ref(tsc2, pm1, pm2);
+ tsc2 = calc_pmtimer_ref(tsc2, ref1, ref2);
tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+
+ /* Check the reference deviation */
+ delta = ((u64) tsc_pit_min) * 100;
+ do_div(delta, tsc_ref_min);
+
+ /*
+ * If both calibration results are inside a 10% window
+ * then we can be sure, that the calibration
+ * succeeded. We break out of the loop right away. We
+ * use the reference value, as it is more precise.
+ */
+ if (delta >= 90 && delta <= 110) {
+ printk(KERN_INFO
+ "TSC: PIT calibration matches %s. %d loops\n",
+ hpet ? "HPET" : "PMTIMER", i + 1);
+ return tsc_ref_min;
+ }
+
+ /*
+ * Check whether PIT failed more than once. This
+ * happens in virtualized environments. We need to
+ * give the virtual PC a slightly longer timeframe for
+ * the HPET/PMTIMER to make the result precise.
+ */
+ if (i == 1 && tsc_pit_min == ULONG_MAX) {
+ latch = CAL2_LATCH;
+ ms = CAL2_MS;
+ loopmin = CAL2_PIT_LOOPS;
+ }
}
/*
*/
if (tsc_pit_min == ULONG_MAX) {
/* PIT gave no useful value */
- printk(KERN_WARNING "TSC: PIT calibration failed due to "
- "SMI disturbance.\n");
+ printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
/* We don't have an alternative source, disable TSC */
- if (!hpet && !pm1 && !pm2) {
+ if (!hpet && !ref1 && !ref2) {
printk("TSC: No reference (HPET/PMTIMER) available\n");
return 0;
}
/* The alternative source failed as well, disable TSC */
if (tsc_ref_min == ULONG_MAX) {
printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
- "failed due to SMI disturbance.\n");
+ "failed.\n");
return 0;
}
}
/* We don't have an alternative source, use the PIT calibration value */
- if (!hpet && !pm1 && !pm2) {
+ if (!hpet && !ref1 && !ref2) {
printk(KERN_INFO "TSC: Using PIT calibration value\n");
return tsc_pit_min;
}
/* The alternative source failed, use the PIT calibration value */
if (tsc_ref_min == ULONG_MAX) {
- printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
- "to SMI disturbance. Using PIT calibration\n");
+ printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
+ "Using PIT calibration\n");
return tsc_pit_min;
}
- /* Check the reference deviation */
- delta = ((u64) tsc_pit_min) * 100;
- do_div(delta, tsc_ref_min);
-
- /*
- * If both calibration results are inside a 5% window, the we
- * use the lower frequency of those as it is probably the
- * closest estimate.
- */
- if (delta >= 95 && delta <= 105) {
- printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
- hpet ? "HPET" : "PMTIMER");
- printk(KERN_INFO "TSC: using %s calibration value\n",
- tsc_pit_min <= tsc_ref_min ? "PIT" :
- hpet ? "HPET" : "PMTIMER");
- return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
- }
-
- printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
- hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
-
/*
* The calibration values differ too much. In doubt, we use
* the PIT value as we know that there are PMTIMERs around
- * running at double speed.
+ * running at double speed. At least we let the user know:
*/
+ printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
printk(KERN_INFO "TSC: Using PIT calibration value\n");
return tsc_pit_min;
}
-#ifdef CONFIG_X86_32
-/* Only called from the Powernow K7 cpu freq driver */
int recalibrate_cpu_khz(void)
{
#ifndef CONFIG_SMP
unsigned long cpu_khz_old = cpu_khz;
if (cpu_has_tsc) {
- tsc_khz = calibrate_tsc();
+ tsc_khz = x86_platform.calibrate_tsc();
cpu_khz = tsc_khz;
cpu_data(0).loops_per_jiffy =
cpufreq_scale(cpu_data(0).loops_per_jiffy,
EXPORT_SYMBOL(recalibrate_cpu_khz);
-#endif /* CONFIG_X86_32 */
/* Accelerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
*/
DEFINE_PER_CPU(unsigned long, cyc2ns);
+DEFINE_PER_CPU(unsigned long long, cyc2ns_offset);
static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
{
- unsigned long long tsc_now, ns_now;
+ unsigned long long tsc_now, ns_now, *offset;
unsigned long flags, *scale;
local_irq_save(flags);
sched_clock_idle_sleep_event();
scale = &per_cpu(cyc2ns, cpu);
+ offset = &per_cpu(cyc2ns_offset, cpu);
rdtscll(tsc_now);
ns_now = __cycles_2_ns(tsc_now);
- if (cpu_khz)
+ if (cpu_khz) {
*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
+ *offset = ns_now - (tsc_now * *scale >> CYC2NS_SCALE_FACTOR);
+ }
sched_clock_idle_wakeup_event(0);
local_irq_restore(flags);
void *data)
{
struct cpufreq_freqs *freq = data;
- unsigned long *lpj, dummy;
+ unsigned long *lpj;
if (cpu_has(&cpu_data(freq->cpu), X86_FEATURE_CONSTANT_TSC))
return 0;
- lpj = &dummy;
- if (!(freq->flags & CPUFREQ_CONST_LOOPS))
+ lpj = &boot_cpu_data.loops_per_jiffy;
#ifdef CONFIG_SMP
+ if (!(freq->flags & CPUFREQ_CONST_LOOPS))
lpj = &cpu_data(freq->cpu).loops_per_jiffy;
-#else
- lpj = &boot_cpu_data.loops_per_jiffy;
#endif
if (!ref_freq) {
if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
(val == CPUFREQ_RESUMECHANGE)) {
- *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
+ *lpj = cpufreq_scale(loops_per_jiffy_ref, ref_freq, freq->new);
tsc_khz = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
if (!(freq->flags & CPUFREQ_CONST_LOOPS))
* code, which is necessary to support wrapping clocksources like pm
* timer.
*/
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
{
cycle_t ret = (cycle_t)get_cycles();
#ifdef CONFIG_X86_64
static cycle_t __vsyscall_fn vread_tsc(void)
{
- cycle_t ret = (cycle_t)vget_cycles();
+ cycle_t ret;
+
+ /*
+ * Surround the RDTSC by barriers, to make sure it's not
+ * speculated to outside the seqlock critical section and
+ * does not cause time warps:
+ */
+ rdtsc_barrier();
+ ret = (cycle_t)vget_cycles();
+ rdtsc_barrier();
return ret >= __vsyscall_gtod_data.clock.cycle_last ?
ret : __vsyscall_gtod_data.clock.cycle_last;
}
#endif
+static void resume_tsc(struct clocksource *cs)
+{
+ clocksource_tsc.cycle_last = 0;
+}
+
static struct clocksource clocksource_tsc = {
.name = "tsc",
.rating = 300,
.read = read_tsc,
+ .resume = resume_tsc,
.mask = CLOCKSOURCE_MASK(64),
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
{
if (!tsc_unstable) {
tsc_unstable = 1;
- printk("Marking TSC unstable due to %s\n", reason);
+ sched_clock_stable = 0;
+ printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
/* Change only the rating, when not registered */
if (clocksource_tsc.mult)
- clocksource_change_rating(&clocksource_tsc, 0);
- else
+ clocksource_mark_unstable(&clocksource_tsc);
+ else {
+ clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE;
clocksource_tsc.rating = 0;
+ }
}
}
{}
};
-/*
- * Geode_LX - the OLPC CPU has a possibly a very reliable TSC
- */
+static void __init check_system_tsc_reliable(void)
+{
#ifdef CONFIG_MGEODE_LX
-/* RTSC counts during suspend */
+ /* RTSC counts during suspend */
#define RTSC_SUSP 0x100
-
-static void __init check_geode_tsc_reliable(void)
-{
unsigned long res_low, res_high;
rdmsr_safe(MSR_GEODE_BUSCONT_CONF0, &res_low, &res_high);
+ /* Geode_LX - the OLPC CPU has a very reliable TSC */
if (res_low & RTSC_SUSP)
- clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
-}
-#else
-static inline void check_geode_tsc_reliable(void) { }
+ tsc_clocksource_reliable = 1;
#endif
+ if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
+ tsc_clocksource_reliable = 1;
+}
/*
* Make an educated guess if the TSC is trustworthy and synchronized
{
clocksource_tsc.mult = clocksource_khz2mult(tsc_khz,
clocksource_tsc.shift);
+ if (tsc_clocksource_reliable)
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
/* lower the rating if we already know its unstable: */
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_register(&clocksource_tsc);
}
+#ifdef CONFIG_X86_64
+/*
+ * calibrate_cpu is used on systems with fixed rate TSCs to determine
+ * processor frequency
+ */
+#define TICK_COUNT 100000000
+static unsigned long __init calibrate_cpu(void)
+{
+ int tsc_start, tsc_now;
+ int i, no_ctr_free;
+ unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0;
+ unsigned long flags;
+
+ for (i = 0; i < 4; i++)
+ if (avail_to_resrv_perfctr_nmi_bit(i))
+ break;
+ no_ctr_free = (i == 4);
+ if (no_ctr_free) {
+ WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... "
+ "cpu_khz value may be incorrect.\n");
+ i = 3;
+ rdmsrl(MSR_K7_EVNTSEL3, evntsel3);
+ wrmsrl(MSR_K7_EVNTSEL3, 0);
+ rdmsrl(MSR_K7_PERFCTR3, pmc3);
+ } else {
+ reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+ reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+ }
+ local_irq_save(flags);
+ /* start measuring cycles, incrementing from 0 */
+ wrmsrl(MSR_K7_PERFCTR0 + i, 0);
+ wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76);
+ rdtscl(tsc_start);
+ do {
+ rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now);
+ tsc_now = get_cycles();
+ } while ((tsc_now - tsc_start) < TICK_COUNT);
+
+ local_irq_restore(flags);
+ if (no_ctr_free) {
+ wrmsrl(MSR_K7_EVNTSEL3, 0);
+ wrmsrl(MSR_K7_PERFCTR3, pmc3);
+ wrmsrl(MSR_K7_EVNTSEL3, evntsel3);
+ } else {
+ release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
+ release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
+ }
+
+ return pmc_now * tsc_khz / (tsc_now - tsc_start);
+}
+#else
+static inline unsigned long calibrate_cpu(void) { return cpu_khz; }
+#endif
+
void __init tsc_init(void)
{
u64 lpj;
int cpu;
+ x86_init.timers.tsc_pre_init();
+
if (!cpu_has_tsc)
return;
- tsc_khz = calibrate_tsc();
+ tsc_khz = x86_platform.calibrate_tsc();
cpu_khz = tsc_khz;
if (!tsc_khz) {
return;
}
-#ifdef CONFIG_X86_64
if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) &&
(boot_cpu_data.x86_vendor == X86_VENDOR_AMD))
cpu_khz = calibrate_cpu();
-#endif
-
- lpj = ((u64)tsc_khz * 1000);
- do_div(lpj, HZ);
- lpj_fine = lpj;
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
/* now allow native_sched_clock() to use rdtsc */
tsc_disabled = 0;
+ lpj = ((u64)tsc_khz * 1000);
+ do_div(lpj, HZ);
+ lpj_fine = lpj;
+
use_tsc_delay();
/* Check and install the TSC clocksource */
dmi_check_system(bad_tsc_dmi_table);
if (unsynchronized_tsc())
mark_tsc_unstable("TSCs unsynchronized");
- check_geode_tsc_reliable();
+ check_system_tsc_reliable();
init_tsc_clocksource();
}