#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
+#include <linux/prctl.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/clockchips.h>
+#include <trace/power.h>
#include <asm/system.h>
+#include <asm/apic.h>
+#include <asm/idle.h>
+#include <asm/uaccess.h>
+#include <asm/i387.h>
unsigned long idle_halt;
EXPORT_SYMBOL(idle_halt);
struct kmem_cache *task_xstate_cachep;
+DEFINE_TRACE(power_start);
+DEFINE_TRACE(power_end);
+
int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
{
*dst = *src;
}
/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ struct task_struct *me = current;
+ struct thread_struct *t = &me->thread;
+
+ if (me->thread.io_bitmap_ptr) {
+ struct tss_struct *tss = &per_cpu(init_tss, get_cpu());
+
+ kfree(t->io_bitmap_ptr);
+ t->io_bitmap_ptr = NULL;
+ clear_thread_flag(TIF_IO_BITMAP);
+ /*
+ * Careful, clear this in the TSS too:
+ */
+ memset(tss->io_bitmap, 0xff, t->io_bitmap_max);
+ t->io_bitmap_max = 0;
+ put_cpu();
+ }
+
+ ds_exit_thread(current);
+}
+
+void flush_thread(void)
+{
+ struct task_struct *tsk = current;
+
+#ifdef CONFIG_X86_64
+ if (test_tsk_thread_flag(tsk, TIF_ABI_PENDING)) {
+ clear_tsk_thread_flag(tsk, TIF_ABI_PENDING);
+ if (test_tsk_thread_flag(tsk, TIF_IA32)) {
+ clear_tsk_thread_flag(tsk, TIF_IA32);
+ } else {
+ set_tsk_thread_flag(tsk, TIF_IA32);
+ current_thread_info()->status |= TS_COMPAT;
+ }
+ }
+#endif
+
+ clear_tsk_thread_flag(tsk, TIF_DEBUG);
+
+ tsk->thread.debugreg0 = 0;
+ tsk->thread.debugreg1 = 0;
+ tsk->thread.debugreg2 = 0;
+ tsk->thread.debugreg3 = 0;
+ tsk->thread.debugreg6 = 0;
+ tsk->thread.debugreg7 = 0;
+ memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
+ /*
+ * Forget coprocessor state..
+ */
+ tsk->fpu_counter = 0;
+ clear_fpu(tsk);
+ clear_used_math();
+}
+
+static void hard_disable_TSC(void)
+{
+ write_cr4(read_cr4() | X86_CR4_TSD);
+}
+
+void disable_TSC(void)
+{
+ preempt_disable();
+ if (!test_and_set_thread_flag(TIF_NOTSC))
+ /*
+ * Must flip the CPU state synchronously with
+ * TIF_NOTSC in the current running context.
+ */
+ hard_disable_TSC();
+ preempt_enable();
+}
+
+static void hard_enable_TSC(void)
+{
+ write_cr4(read_cr4() & ~X86_CR4_TSD);
+}
+
+static void enable_TSC(void)
+{
+ preempt_disable();
+ if (test_and_clear_thread_flag(TIF_NOTSC))
+ /*
+ * Must flip the CPU state synchronously with
+ * TIF_NOTSC in the current running context.
+ */
+ hard_enable_TSC();
+ preempt_enable();
+}
+
+int get_tsc_mode(unsigned long adr)
+{
+ unsigned int val;
+
+ if (test_thread_flag(TIF_NOTSC))
+ val = PR_TSC_SIGSEGV;
+ else
+ val = PR_TSC_ENABLE;
+
+ return put_user(val, (unsigned int __user *)adr);
+}
+
+int set_tsc_mode(unsigned int val)
+{
+ if (val == PR_TSC_SIGSEGV)
+ disable_TSC();
+ else if (val == PR_TSC_ENABLE)
+ enable_TSC();
+ else
+ return -EINVAL;
+
+ return 0;
+}
+
+void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
+ struct tss_struct *tss)
+{
+ struct thread_struct *prev, *next;
+
+ prev = &prev_p->thread;
+ next = &next_p->thread;
+
+ if (test_tsk_thread_flag(next_p, TIF_DS_AREA_MSR) ||
+ test_tsk_thread_flag(prev_p, TIF_DS_AREA_MSR))
+ ds_switch_to(prev_p, next_p);
+ else if (next->debugctlmsr != prev->debugctlmsr)
+ update_debugctlmsr(next->debugctlmsr);
+
+ if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+ set_debugreg(next->debugreg0, 0);
+ set_debugreg(next->debugreg1, 1);
+ set_debugreg(next->debugreg2, 2);
+ set_debugreg(next->debugreg3, 3);
+ /* no 4 and 5 */
+ set_debugreg(next->debugreg6, 6);
+ set_debugreg(next->debugreg7, 7);
+ }
+
+ if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
+ test_tsk_thread_flag(next_p, TIF_NOTSC)) {
+ /* prev and next are different */
+ if (test_tsk_thread_flag(next_p, TIF_NOTSC))
+ hard_disable_TSC();
+ else
+ hard_enable_TSC();
+ }
+
+ if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
+ /*
+ * Copy the relevant range of the IO bitmap.
+ * Normally this is 128 bytes or less:
+ */
+ memcpy(tss->io_bitmap, next->io_bitmap_ptr,
+ max(prev->io_bitmap_max, next->io_bitmap_max));
+ } else if (test_tsk_thread_flag(prev_p, TIF_IO_BITMAP)) {
+ /*
+ * Clear any possible leftover bits:
+ */
+ memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
+ }
+}
+
+int sys_fork(struct pt_regs *regs)
+{
+ return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
+}
+
+/*
+ * This is trivial, and on the face of it looks like it
+ * could equally well be done in user mode.
+ *
+ * Not so, for quite unobvious reasons - register pressure.
+ * In user mode vfork() cannot have a stack frame, and if
+ * done by calling the "clone()" system call directly, you
+ * do not have enough call-clobbered registers to hold all
+ * the information you need.
+ */
+int sys_vfork(struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0,
+ NULL, NULL);
+}
+
+
+/*
* Idle related variables and functions
*/
unsigned long boot_option_idle_override = 0;
void default_idle(void)
{
if (hlt_use_halt()) {
+ struct power_trace it;
+
+ trace_power_start(&it, POWER_CSTATE, 1);
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
else
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
+ trace_power_end(&it);
} else {
local_irq_enable();
/* loop is done by the caller */
EXPORT_SYMBOL(default_idle);
#endif
+void stop_this_cpu(void *dummy)
+{
+ local_irq_disable();
+ /*
+ * Remove this CPU:
+ */
+ cpu_clear(smp_processor_id(), cpu_online_map);
+ disable_local_APIC();
+
+ for (;;) {
+ if (hlt_works(smp_processor_id()))
+ halt();
+ }
+}
+
static void do_nothing(void *unused)
{
}
*/
void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
{
+ struct power_trace it;
+
+ trace_power_start(&it, POWER_CSTATE, (ax>>4)+1);
if (!need_resched()) {
+ if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+ clflush((void *)¤t_thread_info()->flags);
+
__monitor((void *)¤t_thread_info()->flags, 0, 0);
smp_mb();
if (!need_resched())
__mwait(ax, cx);
}
+ trace_power_end(&it);
}
/* Default MONITOR/MWAIT with no hints, used for default C1 state */
static void mwait_idle(void)
{
+ struct power_trace it;
if (!need_resched()) {
+ trace_power_start(&it, POWER_CSTATE, 1);
+ if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+ clflush((void *)¤t_thread_info()->flags);
+
__monitor((void *)¤t_thread_info()->flags, 0, 0);
smp_mb();
if (!need_resched())
__sti_mwait(0, 0);
else
local_irq_enable();
+ trace_power_end(&it);
} else
local_irq_enable();
}
*/
static void poll_idle(void)
{
+ struct power_trace it;
+
+ trace_power_start(&it, POWER_CSTATE, 0);
local_irq_enable();
while (!need_resched())
cpu_relax();
+ trace_power_end(&it);
}
/*
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_SMP
if (pm_idle == poll_idle && smp_num_siblings > 1) {
printk(KERN_WARNING "WARNING: polling idle and HT enabled,"
" performance may degrade.\n");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff