#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <asm/msr.h>
+#include <asm/tsc.h>
#include "speedstep-lib.h"
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+ "speedstep-lib", msg)
+
+#define PFX "speedstep-lib: "
#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
-static int relaxed_check = 0;
+static int relaxed_check;
#else
#define relaxed_check 0
#endif
* GET PROCESSOR CORE SPEED IN KHZ *
*********************************************************************/
-static unsigned int pentium3_get_frequency (unsigned int processor)
+static unsigned int pentium3_get_frequency(enum speedstep_processor processor)
{
- /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+ /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
struct {
unsigned int ratio; /* Frequency Multiplier (x10) */
u8 bitmap; /* power on configuration bits
[27, 25:22] (in MSR 0x2a) */
- } msr_decode_mult [] = {
+ } msr_decode_mult[] = {
{ 30, 0x01 },
{ 35, 0x05 },
{ 40, 0x02 },
{ 85, 0x26 },
{ 90, 0x20 },
{ 100, 0x2b },
- { 0, 0xff } /* error or unknown value */
+ { 0, 0xff } /* error or unknown value */
};
/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
unsigned int value; /* Front Side Bus speed in MHz */
u8 bitmap; /* power on configuration bits [18: 19]
(in MSR 0x2a) */
- } msr_decode_fsb [] = {
+ } msr_decode_fsb[] = {
{ 66, 0x0 },
{ 100, 0x2 },
{ 133, 0x1 },
}
/* decode the multiplier */
- if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+ if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
dprintk("workaround for early PIIIs\n");
msr_lo &= 0x03c00000;
} else
j++;
}
- dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+ dprintk("speed is %u\n",
+ (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
- return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+ return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
}
/* see table B-2 of 24547212.pdf */
if (msr_lo & 0x00040000) {
- printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
+ msr_lo, msr_tmp);
return 0;
}
msr_tmp = (msr_lo >> 22) & 0x1f;
- dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+ dprintk("bits 22-26 are 0x%x, speed is %u\n",
+ msr_tmp, (msr_tmp * 100 * 1000));
- return (msr_tmp * 100 * 1000);
+ return msr_tmp * 100 * 1000;
}
static unsigned int pentium_core_get_frequency(void)
{
u32 fsb = 0;
u32 msr_lo, msr_tmp;
+ int ret;
rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
/* see table B-2 of 25366920.pdf */
case 3:
fsb = 166667;
break;
+ case 2:
+ fsb = 200000;
+ break;
+ case 0:
+ fsb = 266667;
+ break;
+ case 4:
+ fsb = 333333;
+ break;
default:
printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
}
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
- dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+ dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+ msr_lo, msr_tmp);
msr_tmp = (msr_lo >> 22) & 0x1f;
- dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+ dprintk("bits 22-26 are 0x%x, speed is %u\n",
+ msr_tmp, (msr_tmp * fsb));
- return (msr_tmp * fsb);
+ ret = (msr_tmp * fsb);
+ return ret;
}
struct cpuinfo_x86 *c = &boot_cpu_data;
u32 msr_lo, msr_hi, mult;
unsigned int fsb = 0;
+ unsigned int ret;
+ u8 fsb_code;
+
+ /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
+ * to System Bus Frequency Ratio Field in the Processor Frequency
+ * Configuration Register of the MSR. Therefore the current
+ * frequency cannot be calculated and has to be measured.
+ */
+ if (c->x86_model < 2)
+ return cpu_khz;
rdmsr(0x2c, msr_lo, msr_hi);
* revision #12 in Table B-1: MSRs in the Pentium 4 and
* Intel Xeon Processors, on page B-4 and B-5.
*/
- if (c->x86_model < 2)
+ fsb_code = (msr_lo >> 16) & 0x7;
+ switch (fsb_code) {
+ case 0:
fsb = 100 * 1000;
- else {
- u8 fsb_code = (msr_lo >> 16) & 0x7;
- switch (fsb_code) {
- case 0:
- fsb = 100 * 1000;
- break;
- case 1:
- fsb = 13333 * 10;
- break;
- case 2:
- fsb = 200 * 1000;
- break;
- }
+ break;
+ case 1:
+ fsb = 13333 * 10;
+ break;
+ case 2:
+ fsb = 200 * 1000;
+ break;
}
if (!fsb)
- printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+ printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
+ "Please send an e-mail to <linux@brodo.de>\n");
/* Multiplier. */
- if (c->x86_model < 2)
- mult = msr_lo >> 27;
- else
- mult = msr_lo >> 24;
+ mult = msr_lo >> 24;
- dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+ dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+ fsb, mult, (fsb * mult));
- return (fsb * mult);
+ ret = (fsb * mult);
+ return ret;
}
-unsigned int speedstep_get_processor_frequency(unsigned int processor)
+/* Warning: may get called from smp_call_function_single. */
+unsigned int speedstep_get_frequency(enum speedstep_processor processor)
{
switch (processor) {
- case SPEEDSTEP_PROCESSOR_PCORE:
+ case SPEEDSTEP_CPU_PCORE:
return pentium_core_get_frequency();
- case SPEEDSTEP_PROCESSOR_PM:
+ case SPEEDSTEP_CPU_PM:
return pentiumM_get_frequency();
- case SPEEDSTEP_PROCESSOR_P4D:
- case SPEEDSTEP_PROCESSOR_P4M:
+ case SPEEDSTEP_CPU_P4D:
+ case SPEEDSTEP_CPU_P4M:
return pentium4_get_frequency();
- case SPEEDSTEP_PROCESSOR_PIII_T:
- case SPEEDSTEP_PROCESSOR_PIII_C:
- case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+ case SPEEDSTEP_CPU_PIII_T:
+ case SPEEDSTEP_CPU_PIII_C:
+ case SPEEDSTEP_CPU_PIII_C_EARLY:
return pentium3_get_frequency(processor);
default:
return 0;
};
return 0;
}
-EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+EXPORT_SYMBOL_GPL(speedstep_get_frequency);
/*********************************************************************
* DETECT SPEEDSTEP-CAPABLE PROCESSOR *
*********************************************************************/
-unsigned int speedstep_detect_processor (void)
+unsigned int speedstep_detect_processor(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
u32 ebx, msr_lo, msr_hi;
* sample has ebx = 0x0f, production has 0x0e.
*/
if ((ebx == 0x0e) || (ebx == 0x0f))
- return SPEEDSTEP_PROCESSOR_P4M;
+ return SPEEDSTEP_CPU_P4M;
break;
case 7:
/*
* samples are only of B-stepping...
*/
if (ebx == 0x0e)
- return SPEEDSTEP_PROCESSOR_P4M;
+ return SPEEDSTEP_CPU_P4M;
break;
case 9:
/*
* M-P4-Ms may have either ebx=0xe or 0xf [see above]
* M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
* also, M-P4M HTs have ebx=0x8, too
- * For now, they are distinguished by the model_id string
+ * For now, they are distinguished by the model_id
+ * string
*/
- if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
- return SPEEDSTEP_PROCESSOR_P4M;
+ if ((ebx == 0x0e) ||
+ (strstr(c->x86_model_id,
+ "Mobile Intel(R) Pentium(R) 4") != NULL))
+ return SPEEDSTEP_CPU_P4M;
break;
default:
break;
switch (c->x86_model) {
case 0x0B: /* Intel PIII [Tualatin] */
- /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */
+ /* cpuid_ebx(1) is 0x04 for desktop PIII,
+ * 0x06 for mobile PIII-M */
ebx = cpuid_ebx(0x00000001);
dprintk("ebx is %x\n", ebx);
/* So far all PIII-M processors support SpeedStep. See
* Intel's 24540640.pdf of June 2003
*/
- return SPEEDSTEP_PROCESSOR_PIII_T;
+ return SPEEDSTEP_CPU_PIII_T;
case 0x08: /* Intel PIII [Coppermine] */
/* all mobile PIII Coppermines have FSB 100 MHz
* ==> sort out a few desktop PIIIs. */
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
- dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+ dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+ msr_lo, msr_hi);
msr_lo &= 0x00c0000;
if (msr_lo != 0x0080000)
return 0;
* bit 56 or 57 is set
*/
rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
- dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
- if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+ dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+ msr_lo, msr_hi);
+ if ((msr_hi & (1<<18)) &&
+ (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
if (c->x86_mask == 0x01) {
dprintk("early PIII version\n");
- return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+ return SPEEDSTEP_CPU_PIII_C_EARLY;
} else
- return SPEEDSTEP_PROCESSOR_PIII_C;
+ return SPEEDSTEP_CPU_PIII_C;
}
default:
* DETECT SPEEDSTEP SPEEDS *
*********************************************************************/
-unsigned int speedstep_get_freqs(unsigned int processor,
+unsigned int speedstep_get_freqs(enum speedstep_processor processor,
unsigned int *low_speed,
unsigned int *high_speed,
unsigned int *transition_latency,
dprintk("trying to determine both speeds\n");
/* get current speed */
- prev_speed = speedstep_get_processor_frequency(processor);
+ prev_speed = speedstep_get_frequency(processor);
if (!prev_speed)
return -EIO;
/* switch to low state */
set_state(SPEEDSTEP_LOW);
- *low_speed = speedstep_get_processor_frequency(processor);
+ *low_speed = speedstep_get_frequency(processor);
if (!*low_speed) {
ret = -EIO;
goto out;
if (transition_latency)
do_gettimeofday(&tv2);
- *high_speed = speedstep_get_processor_frequency(processor);
+ *high_speed = speedstep_get_frequency(processor);
if (!*high_speed) {
ret = -EIO;
goto out;
/* check if the latency measurement is too high or too low
* and set it to a safe value (500uSec) in that case
*/
- if (*transition_latency > 10000000 || *transition_latency < 50000) {
- printk (KERN_WARNING "speedstep: frequency transition measured seems out of "
- "range (%u nSec), falling back to a safe one of %u nSec.\n",
+ if (*transition_latency > 10000000 ||
+ *transition_latency < 50000) {
+ printk(KERN_WARNING PFX "frequency transition "
+ "measured seems out of range (%u "
+ "nSec), falling back to a safe one of"
+ "%u nSec.\n",
*transition_latency, 500000);
*transition_latency = 500000;
}
out:
local_irq_restore(flags);
- return (ret);
+ return ret;
}
EXPORT_SYMBOL_GPL(speedstep_get_freqs);
#ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
module_param(relaxed_check, int, 0444);
-MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+MODULE_PARM_DESC(relaxed_check,
+ "Don't do all checks for speedstep capability.");
#endif
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff