+
/*
* (c) 2003-2006 Advanced Micro Devices, Inc.
* Your use of this code is subject to the terms and conditions of the
#include <linux/string.h>
#include <linux/cpumask.h>
#include <linux/sched.h> /* for current / set_cpus_allowed() */
+#include <linux/io.h>
+#include <linux/delay.h>
#include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
#include <linux/acpi.h>
#include <linux/mutex.h>
#include <acpi/processor.h>
-#endif
#define PFX "powernow-k8: "
#define VERSION "version 2.20.00"
static int cpu_family = CPU_OPTERON;
#ifndef CONFIG_SMP
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
+static inline const struct cpumask *cpu_core_mask(int cpu)
+{
+ return cpumask_of(0);
+}
#endif
/* Return a frequency in MHz, given an input fid */
return 1000 * find_freq_from_fid(fid);
}
-static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate)
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
+ u32 pstate)
{
return data[pstate].frequency;
}
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- if (data->currpstate == HW_PSTATE_INVALID) {
- /* read (initial) hw pstate if not yet set */
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
-
- /*
- * a workaround for family 11h erratum 311 might cause
- * an "out-of-range Pstate if the core is in Pstate-0
- */
- if (i >= data->numps)
- data->currpstate = HW_PSTATE_0;
- else
- data->currpstate = i;
- }
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+ data->currpstate = i;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if ((boot_cpu_data.x86 == 0x11) && (i >= data->numps))
+ data->currpstate = HW_PSTATE_0;
+
return 0;
}
do {
return 1;
}
- lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+ lo = fid;
+ lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
+ lo |= MSR_C_LO_INIT_FID_VID;
dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
fid, lo, data->plllock * PLL_LOCK_CONVERSION);
do {
wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
if (i++ > 100) {
- printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n");
+ printk(KERN_ERR PFX
+ "Hardware error - pending bit very stuck - "
+ "no further pstate changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
count_off_irt(data);
if (savevid != data->currvid) {
- printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
- savevid, data->currvid);
+ printk(KERN_ERR PFX
+ "vid change on fid trans, old 0x%x, new 0x%x\n",
+ savevid, data->currvid);
return 1;
}
if (fid != data->currfid) {
- printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
- data->currfid);
+ printk(KERN_ERR PFX
+ "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+ data->currfid);
return 1;
}
return 1;
}
- lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+ lo = data->currfid;
+ lo |= (vid << MSR_C_LO_VID_SHIFT);
+ lo |= MSR_C_LO_INIT_FID_VID;
dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
vid, lo, STOP_GRANT_5NS);
do {
wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
if (i++ > 100) {
- printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+ printk(KERN_ERR PFX "internal error - pending bit "
+ "very stuck - no further pstate "
+ "changes possible\n");
return 1;
}
} while (query_current_values_with_pending_wait(data));
if (savefid != data->currfid) {
- printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+ printk(KERN_ERR PFX "fid changed on vid trans, old "
+ "0x%x new 0x%x\n",
savefid, data->currfid);
return 1;
}
if (vid != data->currvid) {
- printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
- data->currvid);
+ printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
+ "curr 0x%x\n",
+ vid, data->currvid);
return 1;
}
* Decreasing vid codes represent increasing voltages:
* vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
*/
-static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+static int decrease_vid_code_by_step(struct powernow_k8_data *data,
+ u32 reqvid, u32 step)
{
if ((data->currvid - reqvid) > step)
reqvid = data->currvid - step;
}
/* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
-static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+static int transition_fid_vid(struct powernow_k8_data *data,
+ u32 reqfid, u32 reqvid)
{
- if (core_voltage_pre_transition(data, reqvid))
+ if (core_voltage_pre_transition(data, reqvid, reqfid))
return 1;
if (core_frequency_transition(data, reqfid))
return 1;
if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
- printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+ printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
+ "curr 0x%x 0x%x\n",
smp_processor_id(),
reqfid, reqvid, data->currfid, data->currvid);
return 1;
}
/* Phase 1 - core voltage transition ... setup voltage */
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+ u32 reqvid, u32 reqfid)
{
u32 rvosteps = data->rvo;
u32 savefid = data->currfid;
- u32 maxvid, lo;
+ u32 maxvid, lo, rvomult = 1;
- dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+ dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+ "reqvid 0x%x, rvo 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqvid, data->rvo);
+ if ((savefid < LO_FID_TABLE_TOP) && (reqfid < LO_FID_TABLE_TOP))
+ rvomult = 2;
+ rvosteps *= rvomult;
rdmsr(MSR_FIDVID_STATUS, lo, maxvid);
maxvid = 0x1f & (maxvid >> 16);
dprintk("ph1 maxvid=0x%x\n", maxvid);
return 1;
}
- while ((rvosteps > 0) && ((data->rvo + data->currvid) > reqvid)) {
+ while ((rvosteps > 0) &&
+ ((rvomult * data->rvo + data->currvid) > reqvid)) {
if (data->currvid == maxvid) {
rvosteps = 0;
} else {
dprintk("ph1: changing vid for rvo, req 0x%x\n",
data->currvid - 1);
- if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+ if (decrease_vid_code_by_step(data, data->currvid-1, 1))
return 1;
rvosteps--;
}
return 1;
if (savefid != data->currfid) {
- printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+ printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
+ data->currfid);
return 1;
}
/* Phase 2 - core frequency transition */
static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
{
- u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
-
- if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
- reqfid, data->currfid);
- return 1;
- }
+ u32 vcoreqfid, vcocurrfid, vcofiddiff;
+ u32 fid_interval, savevid = data->currvid;
if (data->currfid == reqfid) {
- printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+ printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
+ data->currfid);
return 0;
}
- dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+ dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+ "reqfid 0x%x\n",
smp_processor_id(),
data->currfid, data->currvid, reqfid);
vcofiddiff = vcocurrfid > vcoreqfid ? vcocurrfid - vcoreqfid
: vcoreqfid - vcocurrfid;
+ if ((reqfid <= LO_FID_TABLE_TOP) && (data->currfid <= LO_FID_TABLE_TOP))
+ vcofiddiff = 0;
+
while (vcofiddiff > 2) {
(data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
if (reqfid > data->currfid) {
if (data->currfid > LO_FID_TABLE_TOP) {
- if (write_new_fid(data, data->currfid + fid_interval)) {
+ if (write_new_fid(data,
+ data->currfid + fid_interval))
return 1;
- }
} else {
if (write_new_fid
- (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+ (data,
+ 2 + convert_fid_to_vco_fid(data->currfid)))
return 1;
- }
}
} else {
if (write_new_fid(data, data->currfid - fid_interval))
if (data->currfid != reqfid) {
printk(KERN_ERR PFX
- "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+ "ph2: mismatch, failed fid transition, "
+ "curr 0x%x, req 0x%x\n",
data->currfid, reqfid);
return 1;
}
}
/* Phase 3 - core voltage transition flow ... jump to the final vid. */
-static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_post_transition(struct powernow_k8_data *data,
+ u32 reqvid)
{
u32 savefid = data->currfid;
u32 savereqvid = reqvid;
if (data->currvid != reqvid) {
printk(KERN_ERR PFX
- "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+ "ph3: failed vid transition\n, "
+ "req 0x%x, curr 0x%x",
reqvid, data->currvid);
return 1;
}
return 0;
}
-static int check_supported_cpu(unsigned int cpu)
+static void check_supported_cpu(void *_rc)
{
- cpumask_t oldmask;
u32 eax, ebx, ecx, edx;
- unsigned int rc = 0;
-
- oldmask = current->cpus_allowed;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ int *rc = _rc;
- if (smp_processor_id() != cpu) {
- printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
- goto out;
- }
+ *rc = -ENODEV;
if (current_cpu_data.x86_vendor != X86_VENDOR_AMD)
- goto out;
+ return;
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
((eax & CPUID_XFAM) < CPUID_XFAM_10H))
- goto out;
+ return;
if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
- printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
- goto out;
+ printk(KERN_INFO PFX
+ "Processor cpuid %x not supported\n", eax);
+ return;
}
eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
printk(KERN_INFO PFX
"No frequency change capabilities detected\n");
- goto out;
+ return;
}
cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
- if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
- printk(KERN_INFO PFX "Power state transitions not supported\n");
- goto out;
+ if ((edx & P_STATE_TRANSITION_CAPABLE)
+ != P_STATE_TRANSITION_CAPABLE) {
+ printk(KERN_INFO PFX
+ "Power state transitions not supported\n");
+ return;
}
} else { /* must be a HW Pstate capable processor */
cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
if ((edx & USE_HW_PSTATE) == USE_HW_PSTATE)
cpu_family = CPU_HW_PSTATE;
else
- goto out;
+ return;
}
- rc = 1;
-
-out:
- set_cpus_allowed_ptr(current, &oldmask);
- return rc;
+ *rc = 0;
}
-static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
+ u8 maxvid)
{
unsigned int j;
u8 lastfid = 0xff;
j, pst[j].vid);
return -EINVAL;
}
- if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */
+ if (pst[j].vid < data->rvo) {
+ /* vid + rvo >= 0 */
printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
" %d\n", j);
return -ENODEV;
}
- if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */
+ if (pst[j].vid < maxvid + data->rvo) {
+ /* vid + rvo >= maxvid */
printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
" %d\n", j);
return -ENODEV;
return -EINVAL;
}
if (lastfid > LO_FID_TABLE_TOP)
- printk(KERN_INFO FW_BUG PFX "first fid not from lo freq table\n");
+ printk(KERN_INFO FW_BUG PFX
+ "first fid not from lo freq table\n");
return 0;
}
+static void invalidate_entry(struct cpufreq_frequency_table *powernow_table,
+ unsigned int entry)
+{
+ powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+
static void print_basics(struct powernow_k8_data *data)
{
int j;
for (j = 0; j < data->numps; j++) {
- if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
+ if (data->powernow_table[j].frequency !=
+ CPUFREQ_ENTRY_INVALID) {
if (cpu_family == CPU_HW_PSTATE) {
- printk(KERN_INFO PFX " %d : pstate %d (%d MHz)\n",
- j,
+ printk(KERN_INFO PFX
+ " %d : pstate %d (%d MHz)\n", j,
data->powernow_table[j].index,
data->powernow_table[j].frequency/1000);
} else {
- printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n",
+ printk(KERN_INFO PFX
+ " %d : fid 0x%x (%d MHz), vid 0x%x\n",
j,
data->powernow_table[j].index & 0xff,
data->powernow_table[j].frequency/1000,
}
}
if (data->batps)
- printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+ printk(KERN_INFO PFX "Only %d pstates on battery\n",
+ data->batps);
+}
+
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+ u32 mhz = 0;
+
+ if (boot_cpu_data.x86 == 0x10)
+ mhz = (100 * (fid + 0x10)) >> did;
+ else if (boot_cpu_data.x86 == 0x11)
+ mhz = (100 * (fid + 8)) >> did;
+ else
+ BUG();
+
+ return mhz * 1000;
}
-static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int fill_powernow_table(struct powernow_k8_data *data,
+ struct pst_s *pst, u8 maxvid)
{
struct cpufreq_frequency_table *powernow_table;
unsigned int j;
- if (data->batps) { /* use ACPI support to get full speed on mains power */
- printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+ if (data->batps) {
+ /* use ACPI support to get full speed on mains power */
+ printk(KERN_WARNING PFX
+ "Only %d pstates usable (use ACPI driver for full "
+ "range\n", data->batps);
data->numps = data->batps;
}
- for ( j=1; j<data->numps; j++ ) {
+ for (j = 1; j < data->numps; j++) {
if (pst[j-1].fid >= pst[j].fid) {
printk(KERN_ERR PFX "PST out of sequence\n");
return -EINVAL;
}
for (j = 0; j < data->numps; j++) {
+ int freq;
powernow_table[j].index = pst[j].fid; /* lower 8 bits */
powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
- powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+ freq = find_khz_freq_from_fid(pst[j].fid);
+ powernow_table[j].frequency = freq;
}
powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
powernow_table[data->numps].index = 0;
dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
data->powernow_table = powernow_table;
- if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
+ if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
print_basics(data);
for (j = 0; j < data->numps; j++)
- if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+ if ((pst[j].fid == data->currfid) &&
+ (pst[j].vid == data->currvid))
return 0;
dprintk("currfid/vid do not match PST, ignoring\n");
}
data->vstable = psb->vstable;
- dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+ dprintk("voltage stabilization time: %d(*20us)\n",
+ data->vstable);
dprintk("flags2: 0x%x\n", psb->flags2);
data->rvo = psb->flags2 & 3;
dprintk("numpst: 0x%x\n", psb->num_tables);
cpst = psb->num_tables;
- if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+ if ((psb->cpuid == 0x00000fc0) ||
+ (psb->cpuid == 0x00000fe0)) {
thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
- if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+ if ((thiscpuid == 0x00000fc0) ||
+ (thiscpuid == 0x00000fe0))
cpst = 1;
- }
}
if (cpst != 1) {
printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
data->numps = psb->numps;
dprintk("numpstates: 0x%x\n", data->numps);
- return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+ return fill_powernow_table(data,
+ (struct pst_s *)(psb+1), maxvid);
}
/*
* If you see this message, complain to BIOS manufacturer. If
* BIOS and Kernel Developer's Guide, which is available on
* www.amd.com
*/
- printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n");
+ printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
return -ENODEV;
}
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+ unsigned int index)
{
+ acpi_integer control;
+
if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
return;
- data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
- data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
- data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
- data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
- data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
- data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
+ control = data->acpi_data.states[index].control;
+ data->irt = (control >> IRT_SHIFT) & IRT_MASK;
+ data->rvo = (control >> RVO_SHIFT) & RVO_MASK;
+ data->exttype = (control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+ data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK;
+ data->vidmvs = 1 << ((control >> MVS_SHIFT) & MVS_MASK);
+ data->vstable = (control >> VST_SHIFT) & VST_MASK;
}
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
struct cpufreq_frequency_table *powernow_table;
int ret_val = -ENODEV;
+ acpi_integer control, status;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
goto err_out;
}
- if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ control = data->acpi_data.control_register.space_id;
+ status = data->acpi_data.status_register.space_id;
+
+ if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data.control_register.space_id,
- data->acpi_data.status_register.space_id);
+ control, status);
goto err_out;
}
goto err_out;
}
+ /* fill in data */
+ data->numps = data->acpi_data.state_count;
+ powernow_k8_acpi_pst_values(data, 0);
+
if (cpu_family == CPU_HW_PSTATE)
ret_val = fill_powernow_table_pstate(data, powernow_table);
else
if (ret_val)
goto err_out_mem;
- powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].frequency =
+ CPUFREQ_TABLE_END;
powernow_table[data->acpi_data.state_count].index = 0;
data->powernow_table = powernow_table;
- /* fill in data */
- data->numps = data->acpi_data.state_count;
- if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
+ if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
print_basics(data);
- powernow_k8_acpi_pst_values(data, 0);
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
printk(KERN_ERR PFX
"unable to alloc powernow_k8_data cpumask\n");
ret_val = -ENOMEM;
err_out:
acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
- /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+ /* data->acpi_data.state_count informs us at ->exit()
+ * whether ACPI was used */
data->acpi_data.state_count = 0;
return ret_val;
}
-static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_pstate(struct powernow_k8_data *data,
+ struct cpufreq_frequency_table *powernow_table)
{
int i;
u32 hi = 0, lo = 0;
index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
if (index > data->max_hw_pstate) {
- printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
- printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ printk(KERN_ERR PFX "invalid pstate %d - "
+ "bad value %d.\n", i, index);
+ printk(KERN_ERR PFX "Please report to BIOS "
+ "manufacturer\n");
+ invalidate_entry(powernow_table, i);
continue;
}
rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
if (!(hi & HW_PSTATE_VALID_MASK)) {
dprintk("invalid pstate %d, ignoring\n", index);
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ invalidate_entry(powernow_table, i);
continue;
}
powernow_table[i].index = index;
- powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+ /* Frequency may be rounded for these */
+ if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+ powernow_table[i].frequency =
+ freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+ } else
+ powernow_table[i].frequency =
+ data->acpi_data.states[i].core_frequency * 1000;
}
return 0;
}
-static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
+ struct cpufreq_frequency_table *powernow_table)
{
int i;
- int cntlofreq = 0;
+
for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid;
u32 vid;
+ u32 freq, index;
+ acpi_integer status, control;
if (data->exttype) {
- fid = data->acpi_data.states[i].status & EXT_FID_MASK;
- vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+ status = data->acpi_data.states[i].status;
+ fid = status & EXT_FID_MASK;
+ vid = (status >> VID_SHIFT) & EXT_VID_MASK;
} else {
- fid = data->acpi_data.states[i].control & FID_MASK;
- vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+ control = data->acpi_data.states[i].control;
+ fid = control & FID_MASK;
+ vid = (control >> VID_SHIFT) & VID_MASK;
}
dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
- powernow_table[i].index = fid; /* lower 8 bits */
- powernow_table[i].index |= (vid << 8); /* upper 8 bits */
- powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+ index = fid | (vid<<8);
+ powernow_table[i].index = index;
+
+ freq = find_khz_freq_from_fid(fid);
+ powernow_table[i].frequency = freq;
/* verify frequency is OK */
- if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
- (powernow_table[i].frequency < (MIN_FREQ * 1000))) {
- dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
+ dprintk("invalid freq %u kHz, ignoring\n", freq);
+ invalidate_entry(powernow_table, i);
continue;
}
- /* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+ /* verify voltage is OK -
+ * BIOSs are using "off" to indicate invalid */
if (vid == VID_OFF) {
dprintk("invalid vid %u, ignoring\n", vid);
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ invalidate_entry(powernow_table, i);
continue;
}
- /* verify only 1 entry from the lo frequency table */
- if (fid < HI_FID_TABLE_BOTTOM) {
- if (cntlofreq) {
- /* if both entries are the same, ignore this one ... */
- if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
- (powernow_table[i].index != powernow_table[cntlofreq].index)) {
- printk(KERN_ERR PFX "Too many lo freq table entries\n");
- return 1;
- }
-
- dprintk("double low frequency table entry, ignoring it.\n");
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
- continue;
- } else
- cntlofreq = i;
- }
-
- if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
- printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
- powernow_table[i].frequency,
- (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
- powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+ if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
+ printk(KERN_INFO PFX "invalid freq entries "
+ "%u kHz vs. %u kHz\n", freq,
+ (unsigned int)
+ (data->acpi_data.states[i].core_frequency
+ * 1000));
+ invalidate_entry(powernow_table, i);
continue;
}
}
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
{
if (data->acpi_data.state_count)
- acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+ acpi_processor_unregister_performance(&data->acpi_data,
+ data->cpu);
free_cpumask_var(data->acpi_data.shared_cpu_map);
}
if (cur_latency > max_latency)
max_latency = cur_latency;
}
+ if (max_latency == 0) {
+ /*
+ * Fam 11h always returns 0 as transition latency.
+ * This is intended and means "very fast". While cpufreq core
+ * and governors currently can handle that gracefully, better
+ * set it to 1 to avoid problems in the future.
+ * For all others it's a BIOS bug.
+ */
+ if (boot_cpu_data.x86 != 0x11)
+ printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
+ "latency\n");
+ max_latency = 1;
+ }
/* value in usecs, needs to be in nanoseconds */
return 1000 * max_latency;
}
-#else
-static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
-static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
-static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
-#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
-
/* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_fidvid(struct powernow_k8_data *data,
+ unsigned int index)
{
u32 fid = 0;
u32 vid = 0;
return 0;
}
- if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
- printk(KERN_ERR PFX
- "ignoring illegal change in lo freq table-%x to 0x%x\n",
- data->currfid, fid);
- return 1;
- }
-
dprintk("cpu %d, changing to fid 0x%x, vid 0x%x\n",
smp_processor_id(), fid, vid);
freqs.old = find_khz_freq_from_fid(data->currfid);
freqs.new = find_khz_freq_from_fid(fid);
- for_each_cpu_mask_nr(i, *(data->available_cores)) {
+ for_each_cpu(i, data->available_cores) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
res = transition_fid_vid(data, fid, vid);
freqs.new = find_khz_freq_from_fid(data->currfid);
- for_each_cpu_mask_nr(i, *(data->available_cores)) {
+ for_each_cpu(i, data->available_cores) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
}
/* Take a frequency, and issue the hardware pstate transition command */
-static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_pstate(struct powernow_k8_data *data,
+ unsigned int index)
{
u32 pstate = 0;
int res, i;
pstate = index & HW_PSTATE_MASK;
if (pstate > data->max_hw_pstate)
return 0;
- freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+ freqs.old = find_khz_freq_from_pstate(data->powernow_table,
+ data->currpstate);
freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
- for_each_cpu_mask_nr(i, *(data->available_cores)) {
+ for_each_cpu(i, data->available_cores) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
res = transition_pstate(data, pstate);
freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
- for_each_cpu_mask_nr(i, *(data->available_cores)) {
+ for_each_cpu(i, data->available_cores) {
freqs.cpu = i;
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
}
/* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+static int powernowk8_target(struct cpufreq_policy *pol,
+ unsigned targfreq, unsigned relation)
{
cpumask_t oldmask;
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
dprintk("targ: curr fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
- if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+ if ((checkvid != data->currvid) ||
+ (checkfid != data->currfid)) {
printk(KERN_INFO PFX
- "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
- checkfid, data->currfid, checkvid, data->currvid);
+ "error - out of sync, fix 0x%x 0x%x, "
+ "vid 0x%x 0x%x\n",
+ checkfid, data->currfid,
+ checkvid, data->currvid);
}
}
- if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+ if (cpufreq_frequency_table_target(pol, data->powernow_table,
+ targfreq, relation, &newstate))
goto err_out;
mutex_lock(&fidvid_mutex);
mutex_unlock(&fidvid_mutex);
if (cpu_family == CPU_HW_PSTATE)
- pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate);
+ pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+ newstate);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
ret = 0;
return cpufreq_frequency_table_verify(pol, data->powernow_table);
}
+struct init_on_cpu {
+ struct powernow_k8_data *data;
+ int rc;
+};
+
+static void __cpuinit powernowk8_cpu_init_on_cpu(void *_init_on_cpu)
+{
+ struct init_on_cpu *init_on_cpu = _init_on_cpu;
+
+ if (pending_bit_stuck()) {
+ printk(KERN_ERR PFX "failing init, change pending bit set\n");
+ init_on_cpu->rc = -ENODEV;
+ return;
+ }
+
+ if (query_current_values_with_pending_wait(init_on_cpu->data)) {
+ init_on_cpu->rc = -ENODEV;
+ return;
+ }
+
+ if (cpu_family == CPU_OPTERON)
+ fidvid_msr_init();
+
+ init_on_cpu->rc = 0;
+}
+
/* per CPU init entry point to the driver */
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
+ static const char ACPI_PSS_BIOS_BUG_MSG[] =
+ KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+ FW_BUG PFX "Try again with latest BIOS.\n";
struct powernow_k8_data *data;
- cpumask_t oldmask;
+ struct init_on_cpu init_on_cpu;
int rc;
if (!cpu_online(pol->cpu))
return -ENODEV;
- if (!check_supported_cpu(pol->cpu))
+ smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
+ if (rc)
return -ENODEV;
data = kzalloc(sizeof(struct powernow_k8_data), GFP_KERNEL);
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
-#ifndef CONFIG_ACPI_PROCESSOR
- printk(KERN_ERR PFX "ACPI Processor support is required "
- "for SMP systems but is absent. Please load the "
- "ACPI Processor module before starting this "
- "driver.\n");
-#else
- printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
- " ACPI _PSS objects in a way that Linux "
- "understands. Please report this to the Linux "
- "ACPI maintainers and complain to your BIOS "
- "vendor.\n");
-#endif
- kfree(data);
- return -ENODEV;
+ printk_once(ACPI_PSS_BIOS_BUG_MSG);
+ goto err_out;
}
if (pol->cpu != 0) {
printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
"CPU other than CPU0. Complain to your BIOS "
"vendor.\n");
- kfree(data);
- return -ENODEV;
+ goto err_out;
}
rc = find_psb_table(data);
- if (rc) {
- kfree(data);
- return -ENODEV;
- }
+ if (rc)
+ goto err_out;
+
/* Take a crude guess here.
* That guess was in microseconds, so multiply with 1000 */
pol->cpuinfo.transition_latency = (
pol->cpuinfo.transition_latency = get_transition_latency(data);
/* only run on specific CPU from here on */
- oldmask = current->cpus_allowed;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
-
- if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
- goto err_out;
- }
-
- if (pending_bit_stuck()) {
- printk(KERN_ERR PFX "failing init, change pending bit set\n");
- goto err_out;
- }
-
- if (query_current_values_with_pending_wait(data))
- goto err_out;
-
- if (cpu_family == CPU_OPTERON)
- fidvid_msr_init();
-
- /* run on any CPU again */
- set_cpus_allowed_ptr(current, &oldmask);
+ init_on_cpu.data = data;
+ smp_call_function_single(data->cpu, powernowk8_cpu_init_on_cpu,
+ &init_on_cpu, 1);
+ rc = init_on_cpu.rc;
+ if (rc != 0)
+ goto err_out_exit_acpi;
if (cpu_family == CPU_HW_PSTATE)
cpumask_copy(pol->cpus, cpumask_of(pol->cpu));
else
- cpumask_copy(pol->cpus, &per_cpu(cpu_core_map, pol->cpu));
+ cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu));
data->available_cores = pol->cpus;
if (cpu_family == CPU_HW_PSTATE)
- pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+ pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+ data->currpstate);
else
pol->cur = find_khz_freq_from_fid(data->currfid);
dprintk("policy current frequency %d kHz\n", pol->cur);
cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
if (cpu_family == CPU_HW_PSTATE)
- dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate);
+ dprintk("cpu_init done, current pstate 0x%x\n",
+ data->currpstate);
else
dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
data->currfid, data->currvid);
return 0;
-err_out:
- set_cpus_allowed_ptr(current, &oldmask);
+err_out_exit_acpi:
powernow_k8_cpu_exit_acpi(data);
+err_out:
kfree(data);
return -ENODEV;
}
-static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
return 0;
}
-static unsigned int powernowk8_get (unsigned int cpu)
+static void query_values_on_cpu(void *_err)
{
- struct powernow_k8_data *data;
- cpumask_t oldmask = current->cpus_allowed;
- unsigned int khz = 0;
- unsigned int first;
+ int *err = _err;
+ struct powernow_k8_data *data = __get_cpu_var(powernow_data);
+
+ *err = query_current_values_with_pending_wait(data);
+}
- first = first_cpu(per_cpu(cpu_core_map, cpu));
- data = per_cpu(powernow_data, first);
+static unsigned int powernowk8_get(unsigned int cpu)
+{
+ struct powernow_k8_data *data = per_cpu(powernow_data, cpu);
+ unsigned int khz = 0;
+ int err;
if (!data)
return -EINVAL;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- if (smp_processor_id() != cpu) {
- printk(KERN_ERR PFX
- "limiting to CPU %d failed in powernowk8_get\n", cpu);
- set_cpus_allowed_ptr(current, &oldmask);
- return 0;
- }
-
- if (query_current_values_with_pending_wait(data))
+ smp_call_function_single(cpu, query_values_on_cpu, &err, true);
+ if (err)
goto out;
if (cpu_family == CPU_HW_PSTATE)
out:
- set_cpus_allowed_ptr(current, &oldmask);
return khz;
}
-static struct freq_attr* powernow_k8_attr[] = {
+static struct freq_attr *powernow_k8_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
unsigned int i, supported_cpus = 0;
for_each_online_cpu(i) {
- if (check_supported_cpu(i))
+ int rc;
+ smp_call_function_single(i, check_supported_cpu, &rc, 1);
+ if (rc == 0)
supported_cpus++;
}
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and "
+ "Mark Langsdorf <mark.langsdorf@amd.com>");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff