/*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <joerg.roedel@amd.com>
* Leo Duran <leo.duran@amd.com>
*
#include <linux/pci.h>
#include <linux/acpi.h>
-#include <linux/gfp.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/msi.h>
#include <asm/pci-direct.h>
+#include <asm/amd_iommu_proto.h>
#include <asm/amd_iommu_types.h>
#include <asm/amd_iommu.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/x86_init.h>
/*
* definitions for the ACPI scanning code
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-#ifdef CONFIG_IOMMU_STRESS
-bool amd_iommu_isolate = false;
-#else
-bool amd_iommu_isolate = true; /* if true, device isolation is
- enabled */
-#endif
-
bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
+/* Array to assign indices to IOMMUs*/
+struct amd_iommu *amd_iommus[MAX_IOMMUS];
+int amd_iommus_present;
+
+/* IOMMUs have a non-present cache? */
+bool amd_iommu_np_cache __read_mostly;
+
+/*
+ * The ACPI table parsing functions set this variable on an error
+ */
+static int __initdata amd_iommu_init_err;
+
+/*
+ * List of protection domains - used during resume
+ */
+LIST_HEAD(amd_iommu_pd_list);
+spinlock_t amd_iommu_pd_lock;
+
/*
* Pointer to the device table which is shared by all AMD IOMMUs
* it is indexed by the PCI device id or the HT unit id and contains
struct amd_iommu **amd_iommu_rlookup_table;
/*
- * The pd table (protection domain table) is used to find the protection domain
- * data structure a device belongs to. Indexed with the PCI device id too.
- */
-struct protection_domain **amd_iommu_pd_table;
-
-/*
* AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
* to know which ones are already in use.
*/
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
-static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
/* Function to enable the hardware */
static void iommu_enable(struct amd_iommu *iommu)
{
- printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
+ printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
dev_name(&iommu->dev->dev), iommu->cap_ptr);
iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
*/
for (i = 0; i < table->length; ++i)
checksum += p[i];
- if (checksum != 0)
+ if (checksum != 0) {
/* ACPI table corrupt */
- return -ENODEV;
+ amd_iommu_init_err = -ENODEV;
+ return 0;
+ }
p += IVRS_HEADER_LENGTH;
if (cmd_buf == NULL)
return NULL;
- iommu->cmd_buf_size = CMD_BUFFER_SIZE;
+ iommu->cmd_buf_size = CMD_BUFFER_SIZE | CMD_BUFFER_UNINITIALIZED;
return cmd_buf;
}
/*
+ * This function resets the command buffer if the IOMMU stopped fetching
+ * commands from it.
+ */
+void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
+{
+ iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+ writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+ iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+}
+
+/*
* This function writes the command buffer address to the hardware and
* enables it.
*/
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
- /* set head and tail to zero manually */
- writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
- writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-
- iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+ amd_iommu_reset_cmd_buffer(iommu);
+ iommu->cmd_buf_size &= ~(CMD_BUFFER_UNINITIALIZED);
}
static void __init free_command_buffer(struct amd_iommu *iommu)
{
free_pages((unsigned long)iommu->cmd_buf,
- get_order(iommu->cmd_buf_size));
+ get_order(iommu->cmd_buf_size & ~(CMD_BUFFER_UNINITIALIZED)));
}
/* allocates the memory where the IOMMU will log its events to */
static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
{
spin_lock_init(&iommu->lock);
+
+ /* Add IOMMU to internal data structures */
list_add_tail(&iommu->list, &amd_iommu_list);
+ iommu->index = amd_iommus_present++;
+
+ if (unlikely(iommu->index >= MAX_IOMMUS)) {
+ WARN(1, "AMD-Vi: System has more IOMMUs than supported by this driver\n");
+ return -ENOSYS;
+ }
+
+ /* Index is fine - add IOMMU to the array */
+ amd_iommus[iommu->index] = iommu;
/*
* Copy data from ACPI table entry to the iommu struct
init_iommu_from_acpi(iommu, h);
init_iommu_devices(iommu);
+ if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
+ amd_iommu_np_cache = true;
+
return pci_enable_device(iommu->dev);
}
switch (*p) {
case ACPI_IVHD_TYPE:
- DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+ DUMP_printk("device: %02x:%02x.%01x cap: %04x "
"seg: %d flags: %01x info %04x\n",
PCI_BUS(h->devid), PCI_SLOT(h->devid),
PCI_FUNC(h->devid), h->cap_ptr,
h->mmio_phys);
iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
- if (iommu == NULL)
- return -ENOMEM;
+ if (iommu == NULL) {
+ amd_iommu_init_err = -ENOMEM;
+ return 0;
+ }
+
ret = init_iommu_one(iommu, h);
- if (ret)
- return ret;
+ if (ret) {
+ amd_iommu_init_err = ret;
+ return 0;
+ }
break;
default:
break;
*
****************************************************************************/
-static int __init iommu_setup_msi(struct amd_iommu *iommu)
+static int iommu_setup_msi(struct amd_iommu *iommu)
{
int r;
r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
IRQF_SAMPLE_RANDOM,
- "AMD IOMMU",
+ "AMD-Vi",
NULL);
if (r) {
* functions. Finally it prints some information about AMD IOMMUs and
* the driver state and enables the hardware.
*/
-int __init amd_iommu_init(void)
+static int __init amd_iommu_init(void)
{
int i, ret = 0;
-
- if (no_iommu) {
- printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
- return 0;
- }
-
- if (!amd_iommu_detected)
- return -ENODEV;
-
/*
* First parse ACPI tables to find the largest Bus/Dev/Func
* we need to handle. Upon this information the shared data
if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
return -ENODEV;
+ ret = amd_iommu_init_err;
+ if (ret)
+ goto out;
+
dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE);
alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
if (amd_iommu_rlookup_table == NULL)
goto free;
- /*
- * Protection Domain table - maps devices to protection domains
- * This table has the same size as the rlookup_table
- */
- amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
- get_order(rlookup_table_size));
- if (amd_iommu_pd_table == NULL)
- goto free;
-
amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
GFP_KERNEL | __GFP_ZERO,
get_order(MAX_DOMAIN_ID/8));
*/
amd_iommu_pd_alloc_bitmap[0] = 1;
+ spin_lock_init(&amd_iommu_pd_lock);
+
/*
* now the data structures are allocated and basically initialized
* start the real acpi table scan
if (acpi_table_parse("IVRS", init_iommu_all) != 0)
goto free;
+ if (amd_iommu_init_err) {
+ ret = amd_iommu_init_err;
+ goto free;
+ }
+
if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
goto free;
+ if (amd_iommu_init_err) {
+ ret = amd_iommu_init_err;
+ goto free;
+ }
+
ret = sysdev_class_register(&amd_iommu_sysdev_class);
if (ret)
goto free;
if (ret)
goto free;
- ret = amd_iommu_init_dma_ops();
+ ret = amd_iommu_init_devices();
if (ret)
goto free;
enable_iommus();
- printk(KERN_INFO "AMD IOMMU: device isolation ");
- if (amd_iommu_isolate)
- printk("enabled\n");
+ if (iommu_pass_through)
+ ret = amd_iommu_init_passthrough();
else
- printk("disabled\n");
+ ret = amd_iommu_init_dma_ops();
+
+ if (ret)
+ goto free;
+
+ amd_iommu_init_api();
+
+ amd_iommu_init_notifier();
+
+ if (iommu_pass_through)
+ goto out;
if (amd_iommu_unmap_flush)
- printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+ printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
else
- printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+ printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
+ x86_platform.iommu_shutdown = disable_iommus;
out:
return ret;
free:
+ disable_iommus();
+
+ amd_iommu_uninit_devices();
+
free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
get_order(MAX_DOMAIN_ID/8));
- free_pages((unsigned long)amd_iommu_pd_table,
- get_order(rlookup_table_size));
-
free_pages((unsigned long)amd_iommu_rlookup_table,
get_order(rlookup_table_size));
goto out;
}
-void amd_iommu_shutdown(void)
-{
- disable_iommus();
-}
-
/****************************************************************************
*
* Early detect code. This code runs at IOMMU detection time in the DMA
void __init amd_iommu_detect(void)
{
- if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
+ if (no_iommu || (iommu_detected && !gart_iommu_aperture))
return;
if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
iommu_detected = 1;
amd_iommu_detected = 1;
-#ifdef CONFIG_GART_IOMMU
- gart_iommu_aperture_disabled = 1;
- gart_iommu_aperture = 0;
-#endif
+ x86_init.iommu.iommu_init = amd_iommu_init;
+
+ /* Make sure ACS will be enabled */
+ pci_request_acs();
}
}
static int __init parse_amd_iommu_options(char *str)
{
for (; *str; ++str) {
- if (strncmp(str, "isolate", 7) == 0)
- amd_iommu_isolate = true;
- if (strncmp(str, "share", 5) == 0)
- amd_iommu_isolate = false;
if (strncmp(str, "fullflush", 9) == 0)
amd_iommu_unmap_flush = true;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff