#include <linux/ioport.h>
#include <linux/pci.h>
+#include <asm/pci_x86.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#ifdef CONFIG_X86_64
# include <asm/proto.h>
+# include <asm/numa_64.h>
#endif /* X86 */
#define BAD_MADT_ENTRY(entry, end) ( \
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
*irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+ if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+ setup_IO_APIC_irq_extra(gsi);
+#endif
+
return 0;
}
plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
- acpi_gsi_to_irq(plat_gsi, &irq);
+ irq = plat_gsi;
+
return irq;
}
* ACPI based hotplug support for CPU
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
+#include <acpi/processor.h>
+
+static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+{
+#ifdef CONFIG_ACPI_NUMA
+ int nid;
+
+ nid = acpi_get_node(handle);
+ if (nid == -1 || !node_online(nid))
+ return;
+#ifdef CONFIG_X86_64
+ apicid_to_node[physid] = nid;
+ numa_set_node(cpu, nid);
+#else /* CONFIG_X86_32 */
+ apicid_2_node[physid] = nid;
+ cpu_to_node_map[cpu] = nid;
+#endif
+
+#endif
+}
static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
goto free_new_map;
}
+ acpi_processor_set_pdc(handle);
+
cpu = cpumask_first(new_map);
+ acpi_map_cpu2node(handle, cpu, physid);
*pcpu = cpu;
retval = 0;
if (!error) {
acpi_lapic = 1;
-#ifdef CONFIG_X86_BIGSMP
- generic_bigsmp_probe();
-#endif
/*
* Parse MADT IO-APIC entries
*/
acpi_ioapic = 1;
smp_found_config = 1;
- if (apic->setup_apic_routing)
- apic->setup_apic_routing();
}
}
if (error == -EINVAL) {
}
/*
- * Limit ACPI to CPU enumeration for HT
- */
-static int __init force_acpi_ht(const struct dmi_system_id *d)
-{
- if (!acpi_force) {
- printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
- d->ident);
- disable_acpi();
- acpi_ht = 1;
- } else {
- printk(KERN_NOTICE
- "Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
- }
- return 0;
-}
-
-/*
* Force ignoring BIOS IRQ0 pin2 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
},
/*
- * Boxes that need acpi=ht
- */
- {
- .callback = force_acpi_ht,
- .ident = "FSC Primergy T850",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "HP VISUALIZE NT Workstation",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "Compaq Workstation W8000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P2B-DS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ASUS CUR-DLS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "ABIT i440BX-W83977",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
- DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM Bladecenter",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eServer xSeries 360",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eserver xSeries 330",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
- },
- },
- {
- .callback = force_acpi_ht,
- .ident = "IBM eserver xSeries 440",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
- DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
- },
- },
-
- /*
* Boxes that need ACPI PCI IRQ routing disabled
*/
{
* if acpi_blacklisted() acpi_disabled = 1;
* acpi_irq_model=...
* ...
- *
- * return value: (currently ignored)
- * 0: success
- * !0: failure
*/
-int __init acpi_boot_table_init(void)
+void __init acpi_boot_table_init(void)
{
- int error;
-
dmi_check_system(acpi_dmi_table);
/*
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return;
/*
* Initialize the ACPI boot-time table parser.
*/
- error = acpi_table_init();
- if (error) {
+ if (acpi_table_init()) {
disable_acpi();
- return error;
+ return;
}
acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
*/
- error = acpi_blacklisted();
- if (error) {
+ if (acpi_blacklisted()) {
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
disable_acpi();
- return error;
+ return;
}
}
-
- return 0;
}
int __init early_acpi_boot_init(void)
acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
+ if (!acpi_noirq)
+ x86_init.pci.init = pci_acpi_init;
+
return 0;
}
}
/* Limit ACPI just to boot-time to enable HT */
else if (strcmp(arg, "ht") == 0) {
- if (!acpi_force)
+ if (!acpi_force) {
+ printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n");
disable_acpi();
+ }
acpi_ht = 1;
}
/* acpi=rsdt use RSDT instead of XSDT */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff