config X86
def_bool y
select HAVE_AOUT if X86_32
+ select HAVE_READQ
+ select HAVE_WRITEQ
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_WANT_FRAME_POINTERS
select HAVE_KRETPROBES
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACER
- select HAVE_FUNCTION_RET_TRACER if X86_32
+ select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
select HAVE_ARCH_TRACEHOOK
config GENERIC_BUG
def_bool y
depends on BUG
+ select GENERIC_BUG_RELATIVE_POINTERS if X86_64
+
+config GENERIC_BUG_RELATIVE_POINTERS
+ bool
config GENERIC_HWEIGHT
def_bool y
def_bool y
depends on X86_VOYAGER
+config SPARSE_IRQ
+ bool "Support sparse irq numbering"
+ depends on PCI_MSI || HT_IRQ
+ help
+ This enables support for sparse irqs. This is useful for distro
+ kernels that want to define a high CONFIG_NR_CPUS value but still
+ want to have low kernel memory footprint on smaller machines.
+
+ ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+ out the irq_desc[] array in a more NUMA-friendly way. )
+
+ If you don't know what to do here, say N.
+
+config NUMA_MIGRATE_IRQ_DESC
+ bool "Move irq desc when changing irq smp_affinity"
+ depends on SPARSE_IRQ && NUMA
+ default n
+ help
+ This enables moving irq_desc to cpu/node that irq will use handled.
+
+ If you don't know what to do here, say N.
+
config X86_FIND_SMP_CONFIG
def_bool y
depends on X86_MPPARSE || X86_VOYAGER
-if ACPI
config X86_MPPARSE
- def_bool y
- bool "Enable MPS table"
+ bool "Enable MPS table" if ACPI
+ default y
depends on X86_LOCAL_APIC
help
For old smp systems that do not have proper acpi support. Newer systems
(esp with 64bit cpus) with acpi support, MADT and DSDT will override it
-endif
-
-if !ACPI
-config X86_MPPARSE
- def_bool y
- depends on X86_LOCAL_APIC
-endif
choice
prompt "Subarchitecture Type"
def_bool y
depends on X86_GENERICARCH
-config ES7000_CLUSTERED_APIC
- def_bool y
- depends on SMP && X86_ES7000 && MPENTIUMIII
-
source "arch/x86/Kconfig.cpu"
config HPET_TIMER
The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/hardwaredesign/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
You can safely choose Y here. However, HPET will only be
activated if the platform and the BIOS support this feature.
your BIOS for an option to enable it or if you have an IVRS ACPI
table.
+config AMD_IOMMU_STATS
+ bool "Export AMD IOMMU statistics to debugfs"
+ depends on AMD_IOMMU
+ select DEBUG_FS
+ help
+ This option enables code in the AMD IOMMU driver to collect various
+ statistics about whats happening in the driver and exports that
+ information to userspace via debugfs.
+ If unsure, say N.
+
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
- bool
+ def_bool y if X86_64
help
Support for software bounce buffers used on x86-64 systems
which don't have a hardware IOMMU (e.g. the current generation
config IOMMU_HELPER
def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+config IOMMU_API
+ def_bool (AMD_IOMMU || DMAR)
+
config MAXSMP
bool "Configure Maximum number of SMP Processors and NUMA Nodes"
- depends on X86_64 && SMP && BROKEN
+ depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
+ select CPUMASK_OFFSTACK
default n
help
Configure maximum number of CPUS and NUMA Nodes for this architecture.
If unsure, say N.
config NR_CPUS
- int "Maximum number of CPUs (2-512)" if !MAXSMP
- range 2 512
- depends on SMP
+ int "Maximum number of CPUs" if SMP && !MAXSMP
+ range 2 512 if SMP && !MAXSMP
+ default "1" if !SMP
default "4096" if MAXSMP
- default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
- default "8"
+ default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
+ default "8" if SMP
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 512 and the
def_bool y
depends on X86_32 && X86_VISWS
+config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+ bool "Reroute for broken boot IRQs"
+ default n
+ depends on X86_IO_APIC
+ help
+ This option enables a workaround that fixes a source of
+ spurious interrupts. This is recommended when threaded
+ interrupt handling is used on systems where the generation of
+ superfluous "boot interrupts" cannot be disabled.
+
+ Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
+ entry in the chipset's IO-APIC is masked (as, e.g. the RT
+ kernel does during interrupt handling). On chipsets where this
+ boot IRQ generation cannot be disabled, this workaround keeps
+ the original IRQ line masked so that only the equivalent "boot
+ IRQ" is delivered to the CPUs. The workaround also tells the
+ kernel to set up the IRQ handler on the boot IRQ line. In this
+ way only one interrupt is delivered to the kernel. Otherwise
+ the spurious second interrupt may cause the kernel to bring
+ down (vital) interrupt lines.
+
+ Only affects "broken" chipsets. Interrupt sharing may be
+ increased on these systems.
+
config X86_MCE
bool "Machine Check Exception"
depends on !X86_VOYAGER
config ARCH_PHYS_ADDR_T_64BIT
def_bool X86_64 || X86_PAE
+config DIRECT_GBPAGES
+ bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
+ default y
+ depends on X86_64
+ help
+ Allow the kernel linear mapping to use 1GB pages on CPUs that
+ support it. This can improve the kernel's performance a tiny bit by
+ reducing TLB pressure. If in doubt, say "Y".
+
# Common NUMA Features
config NUMA
- bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
+ bool "Numa Memory Allocation and Scheduler Support"
depends on SMP
depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
help
Enable NUMA (Non Uniform Memory Access) support.
+
The kernel will try to allocate memory used by a CPU on the
local memory controller of the CPU and add some more
NUMA awareness to the kernel.
- For 32-bit this is currently highly experimental and should be only
- used for kernel development. It might also cause boot failures.
- For 64-bit this is recommended on all multiprocessor Opteron systems.
- If the system is EM64T, you should say N unless your system is
- EM64T NUMA.
+ For 64-bit this is recommended if the system is Intel Core i7
+ (or later), AMD Opteron, or EM64T NUMA.
+
+ For 32-bit this is only needed on (rare) 32-bit-only platforms
+ that support NUMA topologies, such as NUMAQ / Summit, or if you
+ boot a 32-bit kernel on a 64-bit NUMA platform.
+
+ Otherwise, you should say N.
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
def_bool y
depends on X86_64 || (X86_32 && HIGHMEM)
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+ depends on MEMORY_HOTPLUG
+
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool X86_64
depends on NUMA
many of the newer IBM Thinkpads. If you experience hangs when you
suspend, try setting this to Y. Otherwise, say N.
-config APM_REAL_MODE_POWER_OFF
- bool "Use real mode APM BIOS call to power off"
- help
- Use real mode APM BIOS calls to switch off the computer. This is
- a work-around for a number of buggy BIOSes. Switch this option on if
- your computer crashes instead of powering off properly.
-
endif # APM
source "arch/x86/kernel/cpu/cpufreq/Kconfig"
and include PCI device scope covered by these DMA
remapping devices.
+config DMAR_DEFAULT_ON
+ def_bool y
+ prompt "Enable DMA Remapping Devices by default"
+ depends on DMAR
+ help
+ Selecting this option will enable a DMAR device at boot time if
+ one is found. If this option is not selected, DMAR support can
+ be enabled by passing intel_iommu=on to the kernel. It is
+ recommended you say N here while the DMAR code remains
+ experimental.
+
config DMAR_GFX_WA
def_bool y
prompt "Support for Graphics workaround"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff