-# $Id: config.in,v 1.158 2002/01/24 22:14:44 davem Exp $
-# For a description of the syntax of this configuration file,
-# see the Configure script.
-#
-
-mainmenu "Linux/UltraSPARC Kernel Configuration"
+# sparc64 configuration
+mainmenu "Linux Kernel Configuration for 64-bit SPARC"
config SPARC
bool
default y
+ select HAVE_OPROFILE
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
config SPARC64
bool
default y
- help
- SPARC is a family of RISC microprocessors designed and marketed by
- Sun Microsystems, incorporated. This port covers the newer 64-bit
- UltraSPARC. The UltraLinux project maintains both the SPARC32 and
- SPARC64 ports; its web page is available at
- <http://www.ultralinux.org/>.
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE
+ select HAVE_IDE
+ select HAVE_LMB
+ select HAVE_ARCH_KGDB
+ select USE_GENERIC_SMP_HELPERS if SMP
+ select HAVE_ARCH_TRACEHOOK
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select RTC_CLASS
+ select RTC_DRV_M48T59
+ select RTC_DRV_CMOS
+ select RTC_DRV_BQ4802
+ select RTC_DRV_SUN4V
+ select RTC_DRV_STARFIRE
config GENERIC_TIME
bool
default y
+config GENERIC_CMOS_UPDATE
+ bool
+ default y
+
config GENERIC_CLOCKEVENTS
bool
default y
+config GENERIC_GPIO
+ bool
+ help
+ Generic GPIO API support
+
config 64BIT
def_bool y
bool
default y
+config IOMMU_HELPER
+ bool
+ default y
+
config QUICKLIST
bool
default y
bool
default y
+config HAVE_SETUP_PER_CPU_AREA
+ def_bool y
+
config ARCH_NO_VIRT_TO_BUS
def_bool y
+config OF
+ def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ bool
+ def_bool y
+
+source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
+menu "Processor type and features"
+
choice
prompt "Kernel page size"
default SPARC64_PAGE_SIZE_8KB
help
This lets you select the page size of the kernel.
- 8KB and 64KB work quite well, since Sparc ELF sections
+ 8KB and 64KB work quite well, since SPARC ELF sections
provide for up to 64KB alignment.
- Therefore, 512KB and 4MB are for expert hackers only.
-
If you don't know what to do, choose 8KB.
config SPARC64_PAGE_SIZE_64KB
bool "64KB"
-config SPARC64_PAGE_SIZE_512KB
- bool "512KB"
-
-config SPARC64_PAGE_SIZE_4MB
- bool "4MB"
-
endchoice
config SECCOMP
bool "Support for hot-pluggable CPUs"
depends on SMP
select HOTPLUG
- ---help---
+ help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
Say N if you want to disable CPU hotplug.
-source "init/Kconfig"
-
-config SYSVIPC_COMPAT
- bool
- depends on COMPAT && SYSVIPC
- default y
-
config GENERIC_HARDIRQS
bool
default y
-menu "General machine setup"
-
source "kernel/time/Kconfig"
config SMP
bool "Symmetric multi-processing support"
- ---help---
+ help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more than
one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
+ you say Y here, the kernel will run on single-processor machines.
+ On a single-processor machine, the kernel will run faster if you say
+ N here.
If you don't know what to do here, say N.
If in doubt, say N.
+config US3_MC
+ tristate "UltraSPARC-III Memory Controller driver"
+ default y
+ help
+ This adds a driver for the UltraSPARC-III memory controller.
+ Loading this driver allows exact mnemonic strings to be
+ printed in the event of a memory error, so that the faulty DIMM
+ on the motherboard can be matched to the error.
+
+ If in doubt, say Y, as this information can be very useful.
+
# Global things across all Sun machines.
+config GENERIC_LOCKBREAK
+ bool
+ default y
+ depends on SMP && PREEMPT
+
config RWSEM_GENERIC_SPINLOCK
bool
bool "4MB"
config HUGETLB_PAGE_SIZE_512K
- depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
bool "512K"
config HUGETLB_PAGE_SIZE_64K
- depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
+ depends on !SPARC64_PAGE_SIZE_64KB
bool "64K"
endchoice
endmenu
+config NUMA
+ bool "NUMA support"
+ depends on SMP
+
+config NODES_SHIFT
+ int
+ default "4"
+ depends on NEED_MULTIPLE_NODES
+
+# Some NUMA nodes have memory ranges that span
+# other nodes. Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node. See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
+config ARCH_POPULATES_NODE_MAP
+ def_bool y
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
+ select SPARSEMEM_VMEMMAP_ENABLE
config ARCH_SPARSEMEM_DEFAULT
def_bool y
- select SPARSEMEM_STATIC
source "mm/Kconfig"
config ISA
bool
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
config ISAPNP
bool
- help
- Say Y here if you would like support for ISA Plug and Play devices.
- Some information is in <file:Documentation/isapnp.txt>.
-
- To compile this driver as a module, choose M here: the
- module will be called isapnp.
-
- If unsure, say Y.
config EISA
bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
config MCA
bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
config PCMCIA
tristate
- ---help---
+ help
Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
bool "PCI support"
select ARCH_SUPPORTS_MSI
help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
- The PCI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information about which PCI hardware does work under Linux and which
- doesn't.
+ Find out whether your system includes a PCI bus. PCI is the name of
+ a bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. If you say Y here, the kernel will include drivers and
+ infrastructure code to support PCI bus devices.
config PCI_DOMAINS
def_bool PCI
To compile the /proc/openprom support as a module, choose M here: the
module will be called openpromfs. If unsure, choose M.
-config SPARC32_COMPAT
- bool "Kernel support for Linux/Sparc 32bit binary compatibility"
- help
- This allows you to run 32-bit binaries on your Ultra.
- Everybody wants this; say Y.
-
-config COMPAT
- bool
- depends on SPARC32_COMPAT
- default y
-
-config BINFMT_ELF32
- bool "Kernel support for 32-bit ELF binaries"
- depends on SPARC32_COMPAT
- help
- This allows you to run 32-bit Linux/ELF binaries on your Ultra.
- Everybody wants this; say Y.
-
-config BINFMT_AOUT32
- bool "Kernel support for 32-bit (ie. SunOS) a.out binaries"
- depends on SPARC32_COMPAT
- help
- This allows you to run 32-bit a.out format binaries on your Ultra.
- If you want to run SunOS binaries (see SunOS binary emulation below)
- or other a.out binaries, say Y. If unsure, say N.
-
menu "Executable file formats"
source "fs/Kconfig.binfmt"
-config SUNOS_EMUL
- bool "SunOS binary emulation"
- depends on BINFMT_AOUT32
- help
- This allows you to run most SunOS binaries. If you want to do this,
- say Y here and place appropriate files in /usr/gnemul/sunos. See
- <http://www.ultralinux.org/faq.html> for more information. If you
- want to run SunOS binaries on an Ultra you must also say Y to
- "Kernel support for 32-bit a.out binaries" above.
-
-config SOLARIS_EMUL
- tristate "Solaris binary emulation (EXPERIMENTAL)"
- depends on SPARC32_COMPAT && EXPERIMENTAL
- help
- This is experimental code which will enable you to run (many)
- Solaris binaries on your SPARC Linux machine.
+config COMPAT
+ bool
+ default y
+ select COMPAT_BINFMT_ELF
- To compile this code as a module, choose M here: the
- module will be called solaris.
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
endmenu
default y
help
SMT scheduler support improves the CPU scheduler's decision making
- when dealing with UltraSPARC cpus at a cost of slightly increased
- overhead in some places. If unsure say N here.
+ when dealing with SPARC cpus at a cost of slightly increased overhead
+ in some places. If unsure say N here.
config SCHED_MC
bool "Multi-core scheduler support"
source "drivers/sbus/char/Kconfig"
-source "drivers/fc4/Kconfig"
-
source "fs/Kconfig"
-menu "Instrumentation Support"
- depends on EXPERIMENTAL
-
-source "arch/sparc64/oprofile/Kconfig"
-
-config KPROBES
- bool "Kprobes (EXPERIMENTAL)"
- depends on KALLSYMS && EXPERIMENTAL && MODULES
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-endmenu
-
source "arch/sparc64/Kconfig.debug"
source "security/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff