#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
*
* so don't go making it static, like I tried. sigh.
*/
-unsigned char *interrupt_enable = NULL;
+unsigned char __iomem *interrupt_enable = NULL;
static void sun4c_disable_irq(unsigned int irq_nr)
{
local_irq_save(flags);
irq_nr &= (NR_IRQS - 1);
- current_mask = *interrupt_enable;
+ current_mask = sbus_readb(interrupt_enable);
switch(irq_nr) {
case 1:
new_mask = ((current_mask) & (~(SUN4C_INT_E1)));
local_irq_restore(flags);
return;
}
- *interrupt_enable = new_mask;
+ sbus_writeb(new_mask, interrupt_enable);
local_irq_restore(flags);
}
local_irq_save(flags);
irq_nr &= (NR_IRQS - 1);
- current_mask = *interrupt_enable;
+ current_mask = sbus_readb(interrupt_enable);
switch(irq_nr) {
case 1:
new_mask = ((current_mask) | SUN4C_INT_E1);
local_irq_restore(flags);
return;
}
- *interrupt_enable = new_mask;
+ sbus_writeb(new_mask, interrupt_enable);
local_irq_restore(flags);
}
-#define TIMER_IRQ 10 /* Also at level 14, but we ignore that one. */
-#define PROFILE_IRQ 14 /* Level14 ticker.. used by OBP for polling */
+struct sun4c_timer_info {
+ u32 l10_count;
+ u32 l10_limit;
+ u32 l14_count;
+ u32 l14_limit;
+};
-volatile struct sun4c_timer_info *sun4c_timers;
+static struct sun4c_timer_info __iomem *sun4c_timers;
static void sun4c_clear_clock_irq(void)
{
- volatile unsigned int clear_intr;
-
- clear_intr = sun4c_timers->timer_limit10;
-}
-
-static void sun4c_clear_profile_irq(int cpu)
-{
- /* Errm.. not sure how to do this.. */
+ sbus_readl(&sun4c_timers->l10_limit);
}
static void sun4c_load_profile_irq(int cpu, unsigned int limit)
static void __init sun4c_init_timers(irq_handler_t counter_fn)
{
- int irq;
+ const struct linux_prom_irqs *irq;
+ struct device_node *dp;
+ const u32 *addr;
+ int err;
+
+ dp = of_find_node_by_name(NULL, "counter-timer");
+ if (!dp) {
+ prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
+ prom_halt();
+ }
- /* Map the Timer chip, this is implemented in hardware inside
- * the cache chip on the sun4c.
- */
- sun4c_timers = ioremap(SUN_TIMER_PHYSADDR,
- sizeof(struct sun4c_timer_info));
+ addr = of_get_property(dp, "address", NULL);
+ if (!addr) {
+ prom_printf("sun4c_init_timers: No address property\n");
+ prom_halt();
+ }
+
+ sun4c_timers = (void __iomem *) (unsigned long) addr[0];
+
+ irq = of_get_property(dp, "intr", NULL);
+ of_node_put(dp);
+ if (!irq) {
+ prom_printf("sun4c_init_timers: No intr property\n");
+ prom_halt();
+ }
/* Have the level 10 timer tick at 100HZ. We don't touch the
* level 14 timer limit since we are letting the prom handle
* them until we have a real console driver so L1-A works.
*/
- sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10);
- master_l10_counter = &sun4c_timers->cur_count10;
- master_l10_limit = &sun4c_timers->timer_limit10;
+ sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit);
- irq = request_irq(TIMER_IRQ,
- counter_fn,
+ master_l10_counter = &sun4c_timers->l10_count;
+
+ err = request_irq(irq[0].pri, counter_fn,
(IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
- if (irq) {
- prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
+ if (err) {
+ prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err);
prom_halt();
}
- claim_ticker14(NULL, PROFILE_IRQ, 0);
+ sun4c_disable_irq(irq[1].pri);
}
#ifdef CONFIG_SMP
void __init sun4c_init_IRQ(void)
{
- struct linux_prom_registers int_regs[2];
- int ie_node;
- struct resource phyres;
-
- ie_node = prom_searchsiblings (prom_getchild(prom_root_node),
- "interrupt-enable");
- if(ie_node == 0)
- panic("Cannot find /interrupt-enable node");
-
- /* Depending on the "address" property is bad news... */
- interrupt_enable = NULL;
- if (prom_getproperty(ie_node, "reg", (char *) int_regs,
- sizeof(int_regs)) != -1) {
- memset(&phyres, 0, sizeof(struct resource));
- phyres.flags = int_regs[0].which_io;
- phyres.start = int_regs[0].phys_addr;
- interrupt_enable = (char *) of_ioremap(&phyres, 0,
- int_regs[0].reg_size, "sun4c_intr");
+ struct device_node *dp;
+ const u32 *addr;
+
+ dp = of_find_node_by_name(NULL, "interrupt-enable");
+ if (!dp) {
+ prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
+ prom_halt();
}
- if (!interrupt_enable)
- panic("Cannot map interrupt_enable");
+
+ addr = of_get_property(dp, "address", NULL);
+ of_node_put(dp);
+ if (!addr) {
+ prom_printf("sun4c_init_IRQ: No address property\n");
+ prom_halt();
+ }
+
+ interrupt_enable = (void __iomem *) (unsigned long) addr[0];
BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
- BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
sparc_init_timers = sun4c_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP);
#endif
- *interrupt_enable = (SUN4C_INT_ENABLE);
+ sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable);
/* Cannot enable interrupts until OBP ticker is disabled. */
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff