* Time of day based timer functions.
*
* S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 1999, 2008
* Author(s): Hartmut Penner (hp@de.ibm.com),
* Martin Schwidefsky (schwidefsky@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
* Copyright (C) 1991, 1992, 1995 Linus Torvalds
*/
+#define KMSG_COMPONENT "time"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/stop_machine.h>
#include <linux/time.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/timex.h>
#include <linux/notifier.h>
#include <linux/clocksource.h>
-
+#include <linux/clockchips.h>
+#include <linux/bootmem.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/s390_ext.h>
#include <asm/div64.h>
+#include <asm/vdso.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/timer.h>
#include <asm/etr.h>
+#include <asm/cio.h>
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 init_timer_cc;
-static u64 jiffies_timer_cc;
-static u64 xtime_cc;
+static u64 sched_clock_base_cc;
+
+static DEFINE_PER_CPU(struct clock_event_device, comparators);
/*
* Scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
- return ((get_clock() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
#define s390_do_profile() do { ; } while(0)
#endif /* CONFIG_PROFILING */
-/*
- * Advance the per cpu tick counter up to the time given with the
- * "time" argument. The per cpu update consists of accounting
- * the virtual cpu time, calling update_process_times and calling
- * the profiling hook. If xtime is before time it is advanced as well.
- */
-void account_ticks(u64 time)
+void clock_comparator_work(void)
{
- __u32 ticks;
- __u64 tmp;
-
- /* Calculate how many ticks have passed. */
- if (time < S390_lowcore.jiffy_timer)
- return;
- tmp = time - S390_lowcore.jiffy_timer;
- if (tmp >= 2*CLK_TICKS_PER_JIFFY) { /* more than two ticks ? */
- ticks = __div(tmp, CLK_TICKS_PER_JIFFY) + 1;
- S390_lowcore.jiffy_timer +=
- CLK_TICKS_PER_JIFFY * (__u64) ticks;
- } else if (tmp >= CLK_TICKS_PER_JIFFY) {
- ticks = 2;
- S390_lowcore.jiffy_timer += 2*CLK_TICKS_PER_JIFFY;
- } else {
- ticks = 1;
- S390_lowcore.jiffy_timer += CLK_TICKS_PER_JIFFY;
- }
-
-#ifdef CONFIG_SMP
- /*
- * Do not rely on the boot cpu to do the calls to do_timer.
- * Spread it over all cpus instead.
- */
- write_seqlock(&xtime_lock);
- if (S390_lowcore.jiffy_timer > xtime_cc) {
- __u32 xticks;
- tmp = S390_lowcore.jiffy_timer - xtime_cc;
- if (tmp >= 2*CLK_TICKS_PER_JIFFY) {
- xticks = __div(tmp, CLK_TICKS_PER_JIFFY);
- xtime_cc += (__u64) xticks * CLK_TICKS_PER_JIFFY;
- } else {
- xticks = 1;
- xtime_cc += CLK_TICKS_PER_JIFFY;
- }
- do_timer(xticks);
- }
- write_sequnlock(&xtime_lock);
-#else
- do_timer(ticks);
-#endif
-
- while (ticks--)
- update_process_times(user_mode(get_irq_regs()));
+ struct clock_event_device *cd;
+ S390_lowcore.clock_comparator = -1ULL;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+ cd = &__get_cpu_var(comparators);
+ cd->event_handler(cd);
s390_do_profile();
}
-#ifdef CONFIG_NO_IDLE_HZ
-
-#ifdef CONFIG_NO_IDLE_HZ_INIT
-int sysctl_hz_timer = 0;
-#else
-int sysctl_hz_timer = 1;
-#endif
-
-/*
- * Stop the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
- */
-static void stop_hz_timer(void)
-{
- unsigned long flags;
- unsigned long seq, next;
- __u64 timer, todval;
- int cpu = smp_processor_id();
-
- if (sysctl_hz_timer != 0)
- return;
-
- cpu_set(cpu, nohz_cpu_mask);
-
- /*
- * Leave the clock comparator set up for the next timer
- * tick if either rcu or a softirq is pending.
- */
- if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
- cpu_clear(cpu, nohz_cpu_mask);
- return;
- }
-
- /*
- * This cpu is going really idle. Set up the clock comparator
- * for the next event.
- */
- next = next_timer_interrupt();
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- todval = -1ULL;
- /* Be careful about overflows. */
- if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) {
- timer = jiffies_timer_cc + timer * CLK_TICKS_PER_JIFFY;
- if (timer >= jiffies_timer_cc)
- todval = timer;
- }
- set_clock_comparator(todval);
-}
-
/*
- * Start the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
+ * Fixup the clock comparator.
*/
-static void start_hz_timer(void)
+static void fixup_clock_comparator(unsigned long long delta)
{
- BUG_ON(!in_interrupt());
-
- if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
+ /* If nobody is waiting there's nothing to fix. */
+ if (S390_lowcore.clock_comparator == -1ULL)
return;
- account_ticks(get_clock());
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
- cpu_clear(smp_processor_id(), nohz_cpu_mask);
+ S390_lowcore.clock_comparator += delta;
+ set_clock_comparator(S390_lowcore.clock_comparator);
}
-static int nohz_idle_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
+static int s390_next_event(unsigned long delta,
+ struct clock_event_device *evt)
{
- switch (action) {
- case S390_CPU_IDLE:
- stop_hz_timer();
- break;
- case S390_CPU_NOT_IDLE:
- start_hz_timer();
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block nohz_idle_nb = {
- .notifier_call = nohz_idle_notify,
-};
-
-static void __init nohz_init(void)
-{
- if (register_idle_notifier(&nohz_idle_nb))
- panic("Couldn't register idle notifier");
+ S390_lowcore.clock_comparator = get_clock() + delta;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+ return 0;
}
-#endif
-
-/*
- * Set up per cpu jiffy timer and set the clock comparator.
- */
-static void setup_jiffy_timer(void)
+static void s390_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- /* Set up clock comparator to next jiffy. */
- S390_lowcore.jiffy_timer =
- jiffies_timer_cc + (jiffies_64 + 1) * CLK_TICKS_PER_JIFFY;
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
}
/*
*/
void init_cpu_timer(void)
{
- setup_jiffy_timer();
+ struct clock_event_device *cd;
+ int cpu;
+
+ S390_lowcore.clock_comparator = -1ULL;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+
+ cpu = smp_processor_id();
+ cd = &per_cpu(comparators, cpu);
+ cd->name = "comparator";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+ cd->mult = 16777;
+ cd->shift = 12;
+ cd->min_delta_ns = 1;
+ cd->max_delta_ns = LONG_MAX;
+ cd->rating = 400;
+ cd->cpumask = cpumask_of(cpu);
+ cd->set_next_event = s390_next_event;
+ cd->set_mode = s390_set_mode;
+
+ clockevents_register_device(cd);
/* Enable clock comparator timer interrupt. */
__ctl_set_bit(0,11);
- /* Always allow ETR external interrupts, even without an ETR. */
+ /* Always allow the timing alert external interrupt. */
__ctl_set_bit(0, 4);
}
static void clock_comparator_interrupt(__u16 code)
{
- /* set clock comparator for next tick */
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
+ if (S390_lowcore.clock_comparator == -1ULL)
+ set_clock_comparator(S390_lowcore.clock_comparator);
+}
+
+static void etr_timing_alert(struct etr_irq_parm *);
+static void stp_timing_alert(struct stp_irq_parm *);
+
+static void timing_alert_interrupt(__u16 code)
+{
+ if (S390_lowcore.ext_params & 0x00c40000)
+ etr_timing_alert((struct etr_irq_parm *)
+ &S390_lowcore.ext_params);
+ if (S390_lowcore.ext_params & 0x00038000)
+ stp_timing_alert((struct stp_irq_parm *)
+ &S390_lowcore.ext_params);
}
static void etr_reset(void);
-static void etr_ext_handler(__u16);
+static void stp_reset(void);
/*
* Get the TOD clock running.
u64 time;
etr_reset();
+ stp_reset();
if (store_clock(&time) == 0)
return time;
/* TOD clock not running. Set the clock to Unix Epoch. */
};
+void update_vsyscall(struct timespec *wall_time, struct clocksource *clock)
+{
+ if (clock != &clocksource_tod)
+ return;
+
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_wmb();
+ vdso_data->xtime_tod_stamp = clock->cycle_last;
+ vdso_data->xtime_clock_sec = xtime.tv_sec;
+ vdso_data->xtime_clock_nsec = xtime.tv_nsec;
+ vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
+ vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+ smp_wmb();
+ ++vdso_data->tb_update_count;
+}
+
+extern struct timezone sys_tz;
+
+void update_vsyscall_tz(void)
+{
+ /* Make userspace gettimeofday spin until we're done. */
+ ++vdso_data->tb_update_count;
+ smp_wmb();
+ vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
+ vdso_data->tz_dsttime = sys_tz.tz_dsttime;
+ smp_wmb();
+ ++vdso_data->tb_update_count;
+}
+
/*
* Initialize the TOD clock and the CPU timer of
* the boot cpu.
*/
void __init time_init(void)
{
- init_timer_cc = reset_tod_clock();
- xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY;
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
if (clocksource_register(&clocksource_tod) != 0)
panic("Could not register TOD clock source");
- /* request the etr external interrupt */
- if (register_early_external_interrupt(0x1406, etr_ext_handler,
+ /* request the timing alert external interrupt */
+ if (register_early_external_interrupt(0x1406,
+ timing_alert_interrupt,
&ext_int_etr_cc) != 0)
panic("Couldn't request external interrupt 0x1406");
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
+ /* Enable cpu timer interrupts on the boot cpu. */
+ vtime_init();
+}
-#ifdef CONFIG_NO_IDLE_HZ
- nohz_init();
-#endif
+/*
+ * The time is "clock". old is what we think the time is.
+ * Adjust the value by a multiple of jiffies and add the delta to ntp.
+ * "delay" is an approximation how long the synchronization took. If
+ * the time correction is positive, then "delay" is subtracted from
+ * the time difference and only the remaining part is passed to ntp.
+ */
+static unsigned long long adjust_time(unsigned long long old,
+ unsigned long long clock,
+ unsigned long long delay)
+{
+ unsigned long long delta, ticks;
+ struct timex adjust;
-#ifdef CONFIG_VIRT_TIMER
- vtime_init();
-#endif
+ if (clock > old) {
+ /* It is later than we thought. */
+ delta = ticks = clock - old;
+ delta = ticks = (delta < delay) ? 0 : delta - delay;
+ delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+ adjust.offset = ticks * (1000000 / HZ);
+ } else {
+ /* It is earlier than we thought. */
+ delta = ticks = old - clock;
+ delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+ delta = -delta;
+ adjust.offset = -ticks * (1000000 / HZ);
+ }
+ sched_clock_base_cc += delta;
+ if (adjust.offset != 0) {
+ pr_notice("The ETR interface has adjusted the clock "
+ "by %li microseconds\n", adjust.offset);
+ adjust.modes = ADJ_OFFSET_SINGLESHOT;
+ do_adjtimex(&adjust);
+ }
+ return delta;
+}
+
+static DEFINE_PER_CPU(atomic_t, clock_sync_word);
+static unsigned long clock_sync_flags;
+
+#define CLOCK_SYNC_HAS_ETR 0
+#define CLOCK_SYNC_HAS_STP 1
+#define CLOCK_SYNC_ETR 2
+#define CLOCK_SYNC_STP 3
+
+/*
+ * The synchronous get_clock function. It will write the current clock
+ * value to the clock pointer and return 0 if the clock is in sync with
+ * the external time source. If the clock mode is local it will return
+ * -ENOSYS and -EAGAIN if the clock is not in sync with the external
+ * reference.
+ */
+int get_sync_clock(unsigned long long *clock)
+{
+ atomic_t *sw_ptr;
+ unsigned int sw0, sw1;
+
+ sw_ptr = &get_cpu_var(clock_sync_word);
+ sw0 = atomic_read(sw_ptr);
+ *clock = get_clock();
+ sw1 = atomic_read(sw_ptr);
+ put_cpu_var(clock_sync_sync);
+ if (sw0 == sw1 && (sw0 & 0x80000000U))
+ /* Success: time is in sync. */
+ return 0;
+ if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags) &&
+ !test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+ return -ENOSYS;
+ if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags) &&
+ !test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+ return -EACCES;
+ return -EAGAIN;
+}
+EXPORT_SYMBOL(get_sync_clock);
+
+/*
+ * Make get_sync_clock return -EAGAIN.
+ */
+static void disable_sync_clock(void *dummy)
+{
+ atomic_t *sw_ptr = &__get_cpu_var(clock_sync_word);
+ /*
+ * Clear the in-sync bit 2^31. All get_sync_clock calls will
+ * fail until the sync bit is turned back on. In addition
+ * increase the "sequence" counter to avoid the race of an
+ * etr event and the complete recovery against get_sync_clock.
+ */
+ atomic_clear_mask(0x80000000, sw_ptr);
+ atomic_inc(sw_ptr);
+}
+
+/*
+ * Make get_sync_clock return 0 again.
+ * Needs to be called from a context disabled for preemption.
+ */
+static void enable_sync_clock(void)
+{
+ atomic_t *sw_ptr = &__get_cpu_var(clock_sync_word);
+ atomic_set_mask(0x80000000, sw_ptr);
+}
+
+/* Single threaded workqueue used for etr and stp sync events */
+static struct workqueue_struct *time_sync_wq;
+
+static void __init time_init_wq(void)
+{
+ if (!time_sync_wq)
+ time_sync_wq = create_singlethread_workqueue("timesync");
}
/*
*/
static int etr_port0_online;
static int etr_port1_online;
+static int etr_steai_available;
static int __init early_parse_etr(char *p)
{
ETR_EVENT_UPDATE,
};
-enum etr_flags {
- ETR_FLAG_ENOSYS,
- ETR_FLAG_EACCES,
- ETR_FLAG_STEAI,
-};
-
/*
* Valid bit combinations of the eacr register are (x = don't care):
* e0 e1 dp p0 p1 ea es sl
*/
static struct etr_eacr etr_eacr;
static u64 etr_tolec; /* time of last eacr update */
-static unsigned long etr_flags;
static struct etr_aib etr_port0;
static int etr_port0_uptodate;
static struct etr_aib etr_port1;
static int etr_port1_uptodate;
static unsigned long etr_events;
static struct timer_list etr_timer;
-static DEFINE_PER_CPU(atomic_t, etr_sync_word);
static void etr_timeout(unsigned long dummy);
static void etr_work_fn(struct work_struct *work);
+static DEFINE_MUTEX(etr_work_mutex);
static DECLARE_WORK(etr_work, etr_work_fn);
/*
- * The etr get_clock function. It will write the current clock value
- * to the clock pointer and return 0 if the clock is in sync with the
- * external time source. If the clock mode is local it will return
- * -ENOSYS and -EAGAIN if the clock is not in sync with the external
- * reference. This function is what ETR is all about..
- */
-int get_sync_clock(unsigned long long *clock)
-{
- atomic_t *sw_ptr;
- unsigned int sw0, sw1;
-
- sw_ptr = &get_cpu_var(etr_sync_word);
- sw0 = atomic_read(sw_ptr);
- *clock = get_clock();
- sw1 = atomic_read(sw_ptr);
- put_cpu_var(etr_sync_sync);
- if (sw0 == sw1 && (sw0 & 0x80000000U))
- /* Success: time is in sync. */
- return 0;
- if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
- return -ENOSYS;
- if (test_bit(ETR_FLAG_EACCES, &etr_flags))
- return -EACCES;
- return -EAGAIN;
-}
-EXPORT_SYMBOL(get_sync_clock);
-
-/*
- * Make get_sync_clock return -EAGAIN.
- */
-static void etr_disable_sync_clock(void *dummy)
-{
- atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
- /*
- * Clear the in-sync bit 2^31. All get_sync_clock calls will
- * fail until the sync bit is turned back on. In addition
- * increase the "sequence" counter to avoid the race of an
- * etr event and the complete recovery against get_sync_clock.
- */
- atomic_clear_mask(0x80000000, sw_ptr);
- atomic_inc(sw_ptr);
-}
-
-/*
- * Make get_sync_clock return 0 again.
- * Needs to be called from a context disabled for preemption.
- */
-static void etr_enable_sync_clock(void)
-{
- atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
- atomic_set_mask(0x80000000, sw_ptr);
-}
-
-/*
* Reset ETR attachment.
*/
static void etr_reset(void)
.e0 = 0, .e1 = 0, ._pad0 = 4, .dp = 0,
.p0 = 0, .p1 = 0, ._pad1 = 0, .ea = 0,
.es = 0, .sl = 0 };
- if (etr_setr(&etr_eacr) == 0)
+ if (etr_setr(&etr_eacr) == 0) {
etr_tolec = get_clock();
- else {
- set_bit(ETR_FLAG_ENOSYS, &etr_flags);
- if (etr_port0_online || etr_port1_online) {
- printk(KERN_WARNING "Running on non ETR capable "
- "machine, only local mode available.\n");
- etr_port0_online = etr_port1_online = 0;
- }
+ set_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags);
+ } else if (etr_port0_online || etr_port1_online) {
+ pr_warning("The real or virtual hardware system does "
+ "not provide an ETR interface\n");
+ etr_port0_online = etr_port1_online = 0;
}
}
{
struct etr_aib aib;
- if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
+ if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
return 0;
+ time_init_wq();
/* Check if this machine has the steai instruction. */
if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0)
- set_bit(ETR_FLAG_STEAI, &etr_flags);
+ etr_steai_available = 1;
setup_timer(&etr_timer, etr_timeout, 0UL);
- if (!etr_port0_online && !etr_port1_online)
- set_bit(ETR_FLAG_EACCES, &etr_flags);
if (etr_port0_online) {
set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
if (etr_port1_online) {
set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
return 0;
}
{
if (!etr_eacr.sl)
return;
- etr_disable_sync_clock(NULL);
+ if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+ disable_sync_clock(NULL);
set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
{
if (!etr_eacr.es)
return;
- etr_disable_sync_clock(NULL);
+ if (test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+ disable_sync_clock(NULL);
set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
- * ETR external interrupt. There are two causes:
+ * ETR timing alert. There are two causes:
* 1) port state change, check the usability of the port
* 2) port alert, one of the ETR-data-validity bits (v1-v2 bits of the
* sldr-status word) or ETR-data word 1 (edf1) or ETR-data word 3 (edf3)
* or ETR-data word 4 (edf4) has changed.
*/
-static void etr_ext_handler(__u16 code)
+static void etr_timing_alert(struct etr_irq_parm *intparm)
{
- struct etr_interruption_parameter *intparm =
- (struct etr_interruption_parameter *) &S390_lowcore.ext_params;
-
if (intparm->pc0)
/* ETR port 0 state change. */
set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
* Both ports are not up-to-date now.
*/
set_bit(ETR_EVENT_PORT_ALERT, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
static void etr_timeout(unsigned long dummy)
{
set_bit(ETR_EVENT_UPDATE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
/*
return 1;
}
-/*
- * The time is "clock". xtime is what we think the time is.
- * Adjust the value by a multiple of jiffies and add the delta to ntp.
- * "delay" is an approximation how long the synchronization took. If
- * the time correction is positive, then "delay" is subtracted from
- * the time difference and only the remaining part is passed to ntp.
- */
-static void etr_adjust_time(unsigned long long clock, unsigned long long delay)
-{
- unsigned long long delta, ticks;
- struct timex adjust;
-
- /*
- * We don't have to take the xtime lock because the cpu
- * executing etr_adjust_time is running disabled in
- * tasklet context and all other cpus are looping in
- * etr_sync_cpu_start.
- */
- if (clock > xtime_cc) {
- /* It is later than we thought. */
- delta = ticks = clock - xtime_cc;
- delta = ticks = (delta < delay) ? 0 : delta - delay;
- delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
- init_timer_cc = init_timer_cc + delta;
- jiffies_timer_cc = jiffies_timer_cc + delta;
- xtime_cc = xtime_cc + delta;
- adjust.offset = ticks * (1000000 / HZ);
- } else {
- /* It is earlier than we thought. */
- delta = ticks = xtime_cc - clock;
- delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
- init_timer_cc = init_timer_cc - delta;
- jiffies_timer_cc = jiffies_timer_cc - delta;
- xtime_cc = xtime_cc - delta;
- adjust.offset = -ticks * (1000000 / HZ);
- }
- if (adjust.offset != 0) {
- printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
- adjust.offset);
- adjust.modes = ADJ_OFFSET_SINGLESHOT;
- do_adjtimex(&adjust);
- }
-}
+struct clock_sync_data {
+ atomic_t cpus;
+ int in_sync;
+ unsigned long long fixup_cc;
+ int etr_port;
+ struct etr_aib *etr_aib;
+};
-static void etr_sync_cpu_start(void *dummy)
+static void clock_sync_cpu(struct clock_sync_data *sync)
{
- int *in_sync = dummy;
-
- etr_enable_sync_clock();
+ atomic_dec(&sync->cpus);
+ enable_sync_clock();
/*
* This looks like a busy wait loop but it isn't. etr_sync_cpus
* is called on all other cpus while the TOD clocks is stopped.
* __udelay will stop the cpu on an enabled wait psw until the
* TOD is running again.
*/
- while (*in_sync == 0) {
+ while (sync->in_sync == 0) {
__udelay(1);
/*
* A different cpu changes *in_sync. Therefore use
*/
barrier();
}
- if (*in_sync != 1)
+ if (sync->in_sync != 1)
/* Didn't work. Clear per-cpu in sync bit again. */
- etr_disable_sync_clock(NULL);
+ disable_sync_clock(NULL);
/*
* This round of TOD syncing is done. Set the clock comparator
* to the next tick and let the processor continue.
*/
- setup_jiffy_timer();
-}
-
-static void etr_sync_cpu_end(void *dummy)
-{
+ fixup_clock_comparator(sync->fixup_cc);
}
/*
* has to be enabled and the other port has to be disabled. The
* last eacr update has to be more than 1.6 seconds in the past.
*/
-static int etr_sync_clock(struct etr_aib *aib, int port)
+static int etr_sync_clock(void *data)
{
- struct etr_aib *sync_port;
- unsigned long long clock, delay;
- int in_sync, follows;
+ static int first;
+ unsigned long long clock, old_clock, delay, delta;
+ struct clock_sync_data *etr_sync;
+ struct etr_aib *sync_port, *aib;
+ int port;
int rc;
- /* Check if the current aib is adjacent to the sync port aib. */
- sync_port = (port == 0) ? &etr_port0 : &etr_port1;
- follows = etr_aib_follows(sync_port, aib, port);
- memcpy(sync_port, aib, sizeof(*aib));
- if (!follows)
- return -EAGAIN;
+ etr_sync = data;
- /*
- * Catch all other cpus and make them wait until we have
- * successfully synced the clock. smp_call_function will
- * return after all other cpus are in etr_sync_cpu_start.
- */
- in_sync = 0;
- preempt_disable();
- smp_call_function(etr_sync_cpu_start,&in_sync,0,0);
- local_irq_disable();
- etr_enable_sync_clock();
+ if (xchg(&first, 1) == 1) {
+ /* Slave */
+ clock_sync_cpu(etr_sync);
+ return 0;
+ }
+
+ /* Wait until all other cpus entered the sync function. */
+ while (atomic_read(&etr_sync->cpus) != 0)
+ cpu_relax();
+
+ port = etr_sync->etr_port;
+ aib = etr_sync->etr_aib;
+ sync_port = (port == 0) ? &etr_port0 : &etr_port1;
+ enable_sync_clock();
/* Set clock to next OTE. */
__ctl_set_bit(14, 21);
__ctl_set_bit(0, 29);
clock = ((unsigned long long) (aib->edf2.etv + 1)) << 32;
+ old_clock = get_clock();
if (set_clock(clock) == 0) {
__udelay(1); /* Wait for the clock to start. */
__ctl_clear_bit(0, 29);
/* Adjust Linux timing variables. */
delay = (unsigned long long)
(aib->edf2.etv - sync_port->edf2.etv) << 32;
- etr_adjust_time(clock, delay);
- setup_jiffy_timer();
+ delta = adjust_time(old_clock, clock, delay);
+ etr_sync->fixup_cc = delta;
+ fixup_clock_comparator(delta);
/* Verify that the clock is properly set. */
if (!etr_aib_follows(sync_port, aib, port)) {
/* Didn't work. */
- etr_disable_sync_clock(NULL);
- in_sync = -EAGAIN;
+ disable_sync_clock(NULL);
+ etr_sync->in_sync = -EAGAIN;
rc = -EAGAIN;
} else {
- in_sync = 1;
+ etr_sync->in_sync = 1;
rc = 0;
}
} else {
/* Could not set the clock ?!? */
__ctl_clear_bit(0, 29);
__ctl_clear_bit(14, 21);
- etr_disable_sync_clock(NULL);
- in_sync = -EAGAIN;
+ disable_sync_clock(NULL);
+ etr_sync->in_sync = -EAGAIN;
rc = -EAGAIN;
}
- local_irq_enable();
- smp_call_function(etr_sync_cpu_end,NULL,0,0);
- preempt_enable();
+ xchg(&first, 0);
+ return rc;
+}
+
+static int etr_sync_clock_stop(struct etr_aib *aib, int port)
+{
+ struct clock_sync_data etr_sync;
+ struct etr_aib *sync_port;
+ int follows;
+ int rc;
+
+ /* Check if the current aib is adjacent to the sync port aib. */
+ sync_port = (port == 0) ? &etr_port0 : &etr_port1;
+ follows = etr_aib_follows(sync_port, aib, port);
+ memcpy(sync_port, aib, sizeof(*aib));
+ if (!follows)
+ return -EAGAIN;
+ memset(&etr_sync, 0, sizeof(etr_sync));
+ etr_sync.etr_aib = aib;
+ etr_sync.etr_port = port;
+ get_online_cpus();
+ atomic_set(&etr_sync.cpus, num_online_cpus() - 1);
+ rc = stop_machine(etr_sync_clock, &etr_sync, &cpu_online_map);
+ put_online_cpus();
return rc;
}
* Do not try to get the alternate port aib if the clock
* is not in sync yet.
*/
- if (!eacr.es)
+ if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags) && !eacr.es)
return eacr;
/*
* the other port immediately. If only stetr is available the
* data-port bit toggle has to be used.
*/
- if (test_bit(ETR_FLAG_STEAI, &etr_flags)) {
+ if (etr_steai_available) {
if (eacr.p0 && !etr_port0_uptodate) {
etr_steai_cv(&etr_port0, ETR_STEAI_PORT_0);
etr_port0_uptodate = 1;
}
/*
- * ETR tasklet. In this function you'll find the main logic. In
+ * ETR work. In this function you'll find the main logic. In
* particular this is the only function that calls etr_update_eacr(),
* it "controls" the etr control register.
*/
struct etr_aib aib;
int sync_port;
+ /* prevent multiple execution. */
+ mutex_lock(&etr_work_mutex);
+
/* Create working copy of etr_eacr. */
eacr = etr_eacr;
if (!eacr.ea) {
/* Both ports offline. Reset everything. */
eacr.dp = eacr.es = eacr.sl = 0;
- on_each_cpu(etr_disable_sync_clock, NULL, 0, 1);
+ on_each_cpu(disable_sync_clock, NULL, 1);
del_timer_sync(&etr_timer);
etr_update_eacr(eacr);
- set_bit(ETR_FLAG_EACCES, &etr_flags);
- return;
+ clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
+ goto out_unlock;
}
/* Store aib to get the current ETR status word. */
eacr.e1 = 1;
sync_port = (etr_port0_uptodate &&
etr_port_valid(&etr_port0, 0)) ? 0 : -1;
- clear_bit(ETR_FLAG_EACCES, &etr_flags);
} else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_pps_mode) {
eacr.sl = 0;
eacr.e0 = 0;
eacr.es = 0;
sync_port = (etr_port1_uptodate &&
etr_port_valid(&etr_port1, 1)) ? 1 : -1;
- clear_bit(ETR_FLAG_EACCES, &etr_flags);
} else if (eacr.p0 && aib.esw.psc0 == etr_lpsc_operational_step) {
eacr.sl = 1;
eacr.e0 = 1;
eacr.e1 = 1;
sync_port = (etr_port0_uptodate &&
etr_port_valid(&etr_port0, 0)) ? 0 : -1;
- clear_bit(ETR_FLAG_EACCES, &etr_flags);
} else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_operational_step) {
eacr.sl = 1;
eacr.e0 = 0;
eacr.es = 0;
sync_port = (etr_port1_uptodate &&
etr_port_valid(&etr_port1, 1)) ? 1 : -1;
- clear_bit(ETR_FLAG_EACCES, &etr_flags);
} else {
/* Both ports not usable. */
eacr.es = eacr.sl = 0;
sync_port = -1;
- set_bit(ETR_FLAG_EACCES, &etr_flags);
+ clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
}
+ if (!test_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+ eacr.es = 0;
+
/*
* If the clock is in sync just update the eacr and return.
* If there is no valid sync port wait for a port update.
*/
- if (eacr.es || sync_port < 0) {
+ if (test_bit(CLOCK_SYNC_STP, &clock_sync_flags) ||
+ eacr.es || sync_port < 0) {
etr_update_eacr(eacr);
etr_set_tolec_timeout(now);
- return;
+ goto out_unlock;
}
/*
* and set up a timer to try again after 0.5 seconds
*/
etr_update_eacr(eacr);
+ set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
if (now < etr_tolec + (1600000 << 12) ||
- etr_sync_clock(&aib, sync_port) != 0) {
+ etr_sync_clock_stop(&aib, sync_port) != 0) {
/* Sync failed. Try again in 1/2 second. */
eacr.es = 0;
etr_update_eacr(eacr);
+ clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
etr_set_sync_timeout();
} else
etr_set_tolec_timeout(now);
+out_unlock:
+ mutex_unlock(&etr_work_mutex);
}
/*
return etr_port1_online ? &etr_port1 : NULL;
}
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+ struct sysdev_attribute *attr,
+ char *buf)
{
unsigned int online;
}
static ssize_t etr_online_store(struct sys_device *dev,
- const char *buf, size_t count)
+ struct sysdev_attribute *attr,
+ const char *buf, size_t count)
{
unsigned int value;
value = simple_strtoul(buf, NULL, 0);
if (value != 0 && value != 1)
return -EINVAL;
- if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
- return -ENOSYS;
+ if (!test_bit(CLOCK_SYNC_HAS_ETR, &clock_sync_flags))
+ return -EOPNOTSUPP;
if (dev == &etr_port0_dev) {
if (etr_port0_online == value)
return count; /* Nothing to do. */
etr_port0_online = value;
set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
} else {
if (etr_port1_online == value)
return count; /* Nothing to do. */
etr_port1_online = value;
set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
- schedule_work(&etr_work);
+ queue_work(time_sync_wq, &etr_work);
}
return count;
}
static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+ struct sysdev_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
etr_eacr.e0 : etr_eacr.e1);
static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
if (!etr_port0_online && !etr_port1_online)
/* Status word is not uptodate if both ports are offline. */
static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
{
struct etr_aib *aib = etr_aib_from_dev(dev);
}
device_initcall(etr_init_sysfs);
+
+/*
+ * Server Time Protocol (STP) code.
+ */
+static int stp_online;
+static struct stp_sstpi stp_info;
+static void *stp_page;
+
+static void stp_work_fn(struct work_struct *work);
+static DEFINE_MUTEX(stp_work_mutex);
+static DECLARE_WORK(stp_work, stp_work_fn);
+
+static int __init early_parse_stp(char *p)
+{
+ if (strncmp(p, "off", 3) == 0)
+ stp_online = 0;
+ else if (strncmp(p, "on", 2) == 0)
+ stp_online = 1;
+ return 0;
+}
+early_param("stp", early_parse_stp);
+
+/*
+ * Reset STP attachment.
+ */
+static void __init stp_reset(void)
+{
+ int rc;
+
+ stp_page = alloc_bootmem_pages(PAGE_SIZE);
+ rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ if (rc == 0)
+ set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags);
+ else if (stp_online) {
+ pr_warning("The real or virtual hardware system does "
+ "not provide an STP interface\n");
+ free_bootmem((unsigned long) stp_page, PAGE_SIZE);
+ stp_page = NULL;
+ stp_online = 0;
+ }
+}
+
+static int __init stp_init(void)
+{
+ if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+ return 0;
+ time_init_wq();
+ if (!stp_online)
+ return 0;
+ queue_work(time_sync_wq, &stp_work);
+ return 0;
+}
+
+arch_initcall(stp_init);
+
+/*
+ * STP timing alert. There are three causes:
+ * 1) timing status change
+ * 2) link availability change
+ * 3) time control parameter change
+ * In all three cases we are only interested in the clock source state.
+ * If a STP clock source is now available use it.
+ */
+static void stp_timing_alert(struct stp_irq_parm *intparm)
+{
+ if (intparm->tsc || intparm->lac || intparm->tcpc)
+ queue_work(time_sync_wq, &stp_work);
+}
+
+/*
+ * STP sync check machine check. This is called when the timing state
+ * changes from the synchronized state to the unsynchronized state.
+ * After a STP sync check the clock is not in sync. The machine check
+ * is broadcasted to all cpus at the same time.
+ */
+void stp_sync_check(void)
+{
+ if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+ return;
+ disable_sync_clock(NULL);
+ queue_work(time_sync_wq, &stp_work);
+}
+
+/*
+ * STP island condition machine check. This is called when an attached
+ * server attempts to communicate over an STP link and the servers
+ * have matching CTN ids and have a valid stratum-1 configuration
+ * but the configurations do not match.
+ */
+void stp_island_check(void)
+{
+ if (!test_bit(CLOCK_SYNC_STP, &clock_sync_flags))
+ return;
+ disable_sync_clock(NULL);
+ queue_work(time_sync_wq, &stp_work);
+}
+
+
+static int stp_sync_clock(void *data)
+{
+ static int first;
+ unsigned long long old_clock, delta;
+ struct clock_sync_data *stp_sync;
+ int rc;
+
+ stp_sync = data;
+
+ if (xchg(&first, 1) == 1) {
+ /* Slave */
+ clock_sync_cpu(stp_sync);
+ return 0;
+ }
+
+ /* Wait until all other cpus entered the sync function. */
+ while (atomic_read(&stp_sync->cpus) != 0)
+ cpu_relax();
+
+ enable_sync_clock();
+
+ set_bit(CLOCK_SYNC_STP, &clock_sync_flags);
+ if (test_and_clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags))
+ queue_work(time_sync_wq, &etr_work);
+
+ rc = 0;
+ if (stp_info.todoff[0] || stp_info.todoff[1] ||
+ stp_info.todoff[2] || stp_info.todoff[3] ||
+ stp_info.tmd != 2) {
+ old_clock = get_clock();
+ rc = chsc_sstpc(stp_page, STP_OP_SYNC, 0);
+ if (rc == 0) {
+ delta = adjust_time(old_clock, get_clock(), 0);
+ fixup_clock_comparator(delta);
+ rc = chsc_sstpi(stp_page, &stp_info,
+ sizeof(struct stp_sstpi));
+ if (rc == 0 && stp_info.tmd != 2)
+ rc = -EAGAIN;
+ }
+ }
+ if (rc) {
+ disable_sync_clock(NULL);
+ stp_sync->in_sync = -EAGAIN;
+ clear_bit(CLOCK_SYNC_STP, &clock_sync_flags);
+ if (etr_port0_online || etr_port1_online)
+ queue_work(time_sync_wq, &etr_work);
+ } else
+ stp_sync->in_sync = 1;
+ xchg(&first, 0);
+ return 0;
+}
+
+/*
+ * STP work. Check for the STP state and take over the clock
+ * synchronization if the STP clock source is usable.
+ */
+static void stp_work_fn(struct work_struct *work)
+{
+ struct clock_sync_data stp_sync;
+ int rc;
+
+ /* prevent multiple execution. */
+ mutex_lock(&stp_work_mutex);
+
+ if (!stp_online) {
+ chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ goto out_unlock;
+ }
+
+ rc = chsc_sstpc(stp_page, STP_OP_CTRL, 0xb0e0);
+ if (rc)
+ goto out_unlock;
+
+ rc = chsc_sstpi(stp_page, &stp_info, sizeof(struct stp_sstpi));
+ if (rc || stp_info.c == 0)
+ goto out_unlock;
+
+ memset(&stp_sync, 0, sizeof(stp_sync));
+ get_online_cpus();
+ atomic_set(&stp_sync.cpus, num_online_cpus() - 1);
+ stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
+ put_online_cpus();
+
+out_unlock:
+ mutex_unlock(&stp_work_mutex);
+}
+
+/*
+ * STP class sysfs interface functions
+ */
+static struct sysdev_class stp_sysclass = {
+ .name = "stp",
+};
+
+static ssize_t stp_ctn_id_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online)
+ return -ENODATA;
+ return sprintf(buf, "%016llx\n",
+ *(unsigned long long *) stp_info.ctnid);
+}
+
+static SYSDEV_CLASS_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
+
+static ssize_t stp_ctn_type_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", stp_info.ctn);
+}
+
+static SYSDEV_CLASS_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
+
+static ssize_t stp_dst_offset_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online || !(stp_info.vbits & 0x2000))
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto);
+}
+
+static SYSDEV_CLASS_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
+
+static ssize_t stp_leap_seconds_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online || !(stp_info.vbits & 0x8000))
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps);
+}
+
+static SYSDEV_CLASS_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
+
+static ssize_t stp_stratum_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum);
+}
+
+static SYSDEV_CLASS_ATTR(stratum, 0400, stp_stratum_show, NULL);
+
+static ssize_t stp_time_offset_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online || !(stp_info.vbits & 0x0800))
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (int) stp_info.tto);
+}
+
+static SYSDEV_CLASS_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
+
+static ssize_t stp_time_zone_offset_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online || !(stp_info.vbits & 0x4000))
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo);
+}
+
+static SYSDEV_CLASS_ATTR(time_zone_offset, 0400,
+ stp_time_zone_offset_show, NULL);
+
+static ssize_t stp_timing_mode_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", stp_info.tmd);
+}
+
+static SYSDEV_CLASS_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
+
+static ssize_t stp_timing_state_show(struct sysdev_class *class, char *buf)
+{
+ if (!stp_online)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", stp_info.tst);
+}
+
+static SYSDEV_CLASS_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
+
+static ssize_t stp_online_show(struct sysdev_class *class, char *buf)
+{
+ return sprintf(buf, "%i\n", stp_online);
+}
+
+static ssize_t stp_online_store(struct sysdev_class *class,
+ const char *buf, size_t count)
+{
+ unsigned int value;
+
+ value = simple_strtoul(buf, NULL, 0);
+ if (value != 0 && value != 1)
+ return -EINVAL;
+ if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
+ return -EOPNOTSUPP;
+ stp_online = value;
+ queue_work(time_sync_wq, &stp_work);
+ return count;
+}
+
+/*
+ * Can't use SYSDEV_CLASS_ATTR because the attribute should be named
+ * stp/online but attr_online already exists in this file ..
+ */
+static struct sysdev_class_attribute attr_stp_online = {
+ .attr = { .name = "online", .mode = 0600 },
+ .show = stp_online_show,
+ .store = stp_online_store,
+};
+
+static struct sysdev_class_attribute *stp_attributes[] = {
+ &attr_ctn_id,
+ &attr_ctn_type,
+ &attr_dst_offset,
+ &attr_leap_seconds,
+ &attr_stp_online,
+ &attr_stratum,
+ &attr_time_offset,
+ &attr_time_zone_offset,
+ &attr_timing_mode,
+ &attr_timing_state,
+ NULL
+};
+
+static int __init stp_init_sysfs(void)
+{
+ struct sysdev_class_attribute **attr;
+ int rc;
+
+ rc = sysdev_class_register(&stp_sysclass);
+ if (rc)
+ goto out;
+ for (attr = stp_attributes; *attr; attr++) {
+ rc = sysdev_class_create_file(&stp_sysclass, *attr);
+ if (rc)
+ goto out_unreg;
+ }
+ return 0;
+out_unreg:
+ for (; attr >= stp_attributes; attr--)
+ sysdev_class_remove_file(&stp_sysclass, *attr);
+ sysdev_class_unregister(&stp_sysclass);
+out:
+ return rc;
+}
+
+device_initcall(stp_init_sysfs);