# see Documentation/kbuild/kconfig-language.txt.
#
+config SCHED_MC
+ def_bool y
+ depends on SMP
+
config MMU
- bool
- default y
+ def_bool y
+
+config ZONE_DMA
+ def_bool y
+ depends on 64BIT
config LOCKDEP_SUPPORT
- bool
- default y
+ def_bool y
config STACKTRACE_SUPPORT
- bool
- default y
+ def_bool y
+
+config HAVE_LATENCYTOP_SUPPORT
+ def_bool y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
+ def_bool y
+
+config ARCH_HAS_ILOG2_U32
bool
- default y
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_CLOCKEVENTS
+ def_bool y
+
+config GENERIC_BUG
bool
+ depends on BUG
default y
-config GENERIC_CALIBRATE_DELAY
+config NO_IOMEM
+ def_bool y
+
+config NO_DMA
+ def_bool y
+
+config GENERIC_LOCKBREAK
bool
default y
+ depends on SMP && PREEMPT
-config GENERIC_TIME
- def_bool y
+config PGSTE
+ bool
+ default y if KVM
mainmenu "Linux Kernel Configuration"
config S390
- bool
- default y
+ def_bool y
+ select HAVE_OPROFILE
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
+ select HAVE_KVM if 64BIT
+ select HAVE_ARCH_TRACEHOOK
source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
menu "Base setup"
comment "Processor type and features"
+source "kernel/time/Kconfig"
+
config 64BIT
bool "64 bit kernel"
help
singleprocessor machines. On a singleprocessor machine, the kernel
will run faster if you say N here.
- See also the <file:Documentation/smp.txt> and the SMP-HOWTO
- available at <http://www.tldp.org/docs.html#howto>.
+ See also the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
Even if you don't know what to do here, say Y.
int "Maximum number of CPUs (2-64)"
range 2 64
depends on SMP
- default "32"
+ default "32" if !64BIT
+ default "64" if 64BIT
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 64 and the
can be controlled through /sys/devices/system/cpu/cpu#.
Say N if you want to disable CPU hotplug.
-config DEFAULT_MIGRATION_COST
- int
- default "1000000"
-
config MATHEMU
bool "IEEE FPU emulation"
depends on MARCH_G5
config COMPAT
bool "Kernel support for 31 bit emulation"
depends on 64BIT
+ select COMPAT_BINFMT_ELF
help
Select this option if you want to enable your system kernel to
handle system-calls from ELF binaries for 31 bit ESA. This option
bool
default y
+config S390_SWITCH_AMODE
+ bool "Switch kernel/user addressing modes"
+ help
+ This option allows to switch the addressing modes of kernel and user
+ space. The kernel parameter switch_amode=on will enable this feature,
+ default is disabled. Enabling this (via kernel parameter) on machines
+ earlier than IBM System z9-109 EC/BC will reduce system performance.
+
+ Note that this option will also be selected by selecting the execute
+ protection option below. Enabling the execute protection via the
+ noexec kernel parameter will also switch the addressing modes,
+ independent of the switch_amode kernel parameter.
+
+
+config S390_EXEC_PROTECT
+ bool "Data execute protection"
+ select S390_SWITCH_AMODE
+ help
+ This option allows to enable a buffer overflow protection for user
+ space programs and it also selects the addressing mode option above.
+ The kernel parameter noexec=on will enable this feature and also
+ switch the addressing modes, default is disabled. Enabling this (via
+ kernel parameter) on machines earlier than IBM System z9-109 EC/BC
+ will reduce system performance.
+
comment "Code generation options"
choice
int "Maximum frame size considered safe (128-2048)"
range 128 2048
depends on WARN_STACK
- default "256"
+ default "2048"
help
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
config ARCH_POPULATES_NODE_MAP
def_bool y
-source "mm/Kconfig"
+comment "Kernel preemption"
+
+source "kernel/Kconfig.preempt"
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ select SPARSEMEM_VMEMMAP_ENABLE
+ select SPARSEMEM_VMEMMAP
+ select SPARSEMEM_STATIC if !64BIT
-config HOLES_IN_ZONE
+config ARCH_SPARSEMEM_DEFAULT
def_bool y
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ def_bool y
+ depends on SPARSEMEM
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ def_bool y
+
+source "mm/Kconfig"
+
comment "I/O subsystem configuration"
config MACHCHK_WARNING
tristate "QDIO support"
---help---
This driver provides the Queued Direct I/O base support for
- IBM mainframes.
-
- For details please refer to the documentation provided by IBM at
- <http://www10.software.ibm.com/developerworks/opensource/linux390>
+ IBM System z.
To compile this driver as a module, choose M here: the
module will be called qdio.
If unsure, say N.
-comment "Misc"
-
-config PREEMPT
- bool "Preemptible Kernel"
+config CHSC_SCH
+ tristate "Support for CHSC subchannels"
help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
+ This driver allows usage of CHSC subchannels. A CHSC subchannel
+ is usually present on LPAR only.
+ The driver creates a device /dev/chsc, which may be used to
+ obtain I/O configuration information about the machine and
+ to issue asynchronous chsc commands (DANGEROUS).
+ You will usually only want to use this interface on a special
+ LPAR designated for system management.
- Say N if you are unsure.
+ To compile this driver as a module, choose M here: the
+ module will be called chsc_sch.
+
+ If unsure, say N.
+
+comment "Misc"
config IPL
bool "Builtin IPL record support"
source "fs/Kconfig.binfmt"
+config FORCE_MAX_ZONEORDER
+ int
+ default "9"
+
config PROCESS_DEBUG
bool "Show crashed user process info"
help
Select this option, if you want to share the text segment of the
Linux kernel between different VM guests. This reduces memory
usage with lots of guests but greatly increases kernel size.
+ Also if a kernel was IPL'ed from a shared segment the kexec system
+ call will not work.
You should only select this option if you know what you are
doing and want to exploit this feature.
Select this option to enable the special message interface to
the cooperative memory management.
+config PAGE_STATES
+ bool "Unused page notification"
+ help
+ This enables the notification of unused pages to the
+ hypervisor. The ESSA instruction is used to do the states
+ changes between a page that has content and the unused state.
+
config VIRT_TIMER
bool "Virtual CPU timer support"
help
config APPLDATA_MEM
tristate "Monitor memory management statistics"
- depends on APPLDATA_BASE
+ depends on APPLDATA_BASE && VM_EVENT_COUNTERS
help
This provides memory management related data to the Linux - VM Monitor
Stream, like paging/swapping rate, memory utilisation, etc.
This can also be compiled as a module, which will be called
appldata_net_sum.o.
-config NO_IDLE_HZ
- bool "No HZ timer ticks in idle"
- help
- Switches the regular HZ timer off when the system is going idle.
- This helps z/VM to detect that the Linux system is idle. VM can
- then "swap-out" this guest which reduces memory usage. It also
- reduces the overhead of idle systems.
-
- The HZ timer can be switched on/off via /proc/sys/kernel/hz_timer.
- hz_timer=0 means HZ timer is disabled. hz_timer=1 means HZ
- timer is active.
-
-config NO_IDLE_HZ_INIT
- bool "HZ timer in idle off by default"
- depends on NO_IDLE_HZ
- help
- The HZ timer is switched off in idle by default. That means the
- HZ timer is already disabled at boot time.
+source kernel/Kconfig.hz
config S390_HYPFS_FS
bool "s390 hypervisor file system support"
current kernel, and to start another kernel. It is like a reboot
but is independent of hardware/microcode support.
+config ZFCPDUMP
+ tristate "zfcpdump support"
+ select SMP
+ default n
+ help
+ Select this option if you want to build an zfcpdump enabled kernel.
+ Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
+
+config S390_GUEST
+bool "s390 guest support for KVM (EXPERIMENTAL)"
+ depends on 64BIT && EXPERIMENTAL
+ select VIRTIO
+ select VIRTIO_RING
+ select VIRTIO_CONSOLE
+ help
+ Select this option if you want to run the kernel as a guest under
+ the KVM hypervisor. This will add detection for KVM as well as a
+ virtio transport. If KVM is detected, the virtio console will be
+ the default console.
endmenu
source "net/Kconfig"
config PCMCIA
- bool
- default n
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
+ def_bool n
-source "drivers/scsi/Kconfig"
-
-source "drivers/s390/Kconfig"
+config CCW
+ def_bool y
-source "drivers/net/Kconfig"
+source "drivers/Kconfig"
source "fs/Kconfig"
-menu "Instrumentation Support"
-
-source "arch/s390/oprofile/Kconfig"
-
-config KPROBES
- bool "Kprobes (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MODULES
- help
- Kprobes allows you to trap at almost any kernel address and
- execute a callback function. register_kprobe() establishes
- a probepoint and specifies the callback. Kprobes is useful
- for kernel debugging, non-intrusive instrumentation and testing.
- If in doubt, say "N".
-
-endmenu
-
source "arch/s390/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"
+
+source "arch/s390/kvm/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff