#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/root_dev.h>
#include <linux/bitops.h>
#include <linux/suspend.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/reg.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/kexec.h>
#include <asm/pci-bridge.h>
#include <asm/ohare.h>
#include <asm/mediabay.h>
#include <asm/btext.h>
#include <asm/pmac_feature.h>
#include <asm/time.h>
-#include <asm/of_device.h>
-#include <asm/of_platform.h>
#include <asm/mmu_context.h>
#include <asm/iommu.h>
#include <asm/smu.h>
#include <asm/pmc.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include "pmac.h"
#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */
#ifdef CONFIG_PPC64
-#include <asm/udbg.h>
int sccdbg;
#endif
-extern void zs_kgdb_hook(int tty_num);
-
sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
EXPORT_SYMBOL(sys_ctrler);
EXPORT_SYMBOL(smu_cmdbuf_abs);
#endif
-#ifdef CONFIG_SMP
-extern struct smp_ops_t psurge_smp_ops;
-extern struct smp_ops_t core99_smp_ops;
-#endif /* CONFIG_SMP */
-
static void pmac_show_cpuinfo(struct seq_file *m)
{
struct device_node *np;
}
/* See if newworld or oldworld */
- for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; )
- if (of_get_property(ic, "interrupt-controller", NULL))
- break;
+ ic = of_find_node_with_property(NULL, "interrupt-controller");
if (ic) {
pmac_newworld = 1;
of_node_put(ic);
l2cr_init();
#endif /* CONFIG_PPC32 */
-#ifdef CONFIG_KGDB
- zs_kgdb_hook(0);
-#endif
-
find_via_cuda();
find_via_pmu();
smu_init();
-#if defined(CONFIG_NVRAM) || defined(CONFIG_PPC64)
+#if defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) || \
+ defined(CONFIG_PPC64)
pmac_nvram_init();
#endif
ROOT_DEV = DEFAULT_ROOT_DEVICE;
#endif
-#ifdef CONFIG_SMP
- /* Check for Core99 */
- ic = of_find_node_by_name(NULL, "uni-n");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u3");
- if (!ic)
- ic = of_find_node_by_name(NULL, "u4");
- if (ic) {
- of_node_put(ic);
- smp_ops = &core99_smp_ops;
- }
-#ifdef CONFIG_PPC32
- else
- smp_ops = &psurge_smp_ops;
-#endif
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
#endif /* CONFIG_ADB */
}
-char *bootpath;
-char *bootdevice;
-void *boot_host;
-int boot_target;
-int boot_part;
-static dev_t boot_dev;
-
#ifdef CONFIG_SCSI
-void __init note_scsi_host(struct device_node *node, void *host)
+void note_scsi_host(struct device_node *node, void *host)
{
- int l;
- char *p;
-
- l = strlen(node->full_name);
- if (bootpath != NULL && bootdevice != NULL
- && strncmp(node->full_name, bootdevice, l) == 0
- && (bootdevice[l] == '/' || bootdevice[l] == 0)) {
- boot_host = host;
- /*
- * There's a bug in OF 1.0.5. (Why am I not surprised.)
- * If you pass a path like scsi/sd@1:0 to canon, it returns
- * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0
- * That is, the scsi target number doesn't get preserved.
- * So we pick the target number out of bootpath and use that.
- */
- p = strstr(bootpath, "/sd@");
- if (p != NULL) {
- p += 4;
- boot_target = simple_strtoul(p, NULL, 10);
- p = strchr(p, ':');
- if (p != NULL)
- boot_part = simple_strtoul(p + 1, NULL, 10);
- }
- }
}
EXPORT_SYMBOL(note_scsi_host);
#endif
-#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
-static dev_t __init find_ide_boot(void)
-{
- char *p;
- int n;
- dev_t __init pmac_find_ide_boot(char *bootdevice, int n);
-
- if (bootdevice == NULL)
- return 0;
- p = strrchr(bootdevice, '/');
- if (p == NULL)
- return 0;
- n = p - bootdevice;
-
- return pmac_find_ide_boot(bootdevice, n);
-}
-#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
-
-static void __init find_boot_device(void)
-{
-#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
- boot_dev = find_ide_boot();
-#endif
-}
-
static int initializing = 1;
static int pmac_late_init(void)
ppc_md.progress = NULL;
return 0;
}
+machine_late_initcall(powermac, pmac_late_init);
-late_initcall(pmac_late_init);
-
-/* can't be __init - can be called whenever a disk is first accessed */
-void note_bootable_part(dev_t dev, int part, int goodness)
+/*
+ * This is __init_refok because we check for "initializing" before
+ * touching any of the __init sensitive things and "initializing"
+ * will be false after __init time. This can't be __init because it
+ * can be called whenever a disk is first accessed.
+ */
+void __init_refok note_bootable_part(dev_t dev, int part, int goodness)
{
- static int found_boot = 0;
char *p;
if (!initializing)
if (p != NULL && (p == boot_command_line || p[-1] == ' '))
return;
- if (!found_boot) {
- find_boot_device();
- found_boot = 1;
- }
- if (!boot_dev || dev == boot_dev) {
- ROOT_DEV = dev + part;
- boot_dev = 0;
- current_root_goodness = goodness;
- }
+ ROOT_DEV = dev + part;
+ current_root_goodness = goodness;
}
#ifdef CONFIG_ADB_CUDA
#ifdef CONFIG_PPC64
iommu_init_early_dart();
#endif
+
+ /* SMP Init has to be done early as we need to patch up
+ * cpu_possible_map before interrupt stacks are allocated
+ * or kaboom...
+ */
+#ifdef CONFIG_SMP
+ pmac_setup_smp();
+#endif
}
static int __init pmac_declare_of_platform_devices(void)
if (machine_is(chrp))
return -1;
- if (!machine_is(powermac))
- return 0;
-
np = of_find_node_by_name(NULL, "valkyrie");
if (np)
of_platform_device_create(np, "valkyrie", NULL);
return 0;
}
+machine_device_initcall(powermac, pmac_declare_of_platform_devices);
+
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+ struct device_node *prom_stdout = NULL;
+ int offset = 0;
+ const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+ char *devname = "ttyS";
+#else
+ char *devname = "ttyPZ";
+#endif
+
+ pr_debug(" -> check_pmac_serial_console()\n");
+
+ /* The user has requested a console so this is already set up. */
+ if (strstr(boot_command_line, "console=")) {
+ pr_debug(" console was specified !\n");
+ return -EBUSY;
+ }
+
+ if (!of_chosen) {
+ pr_debug(" of_chosen is NULL !\n");
+ return -ENODEV;
+ }
+
+ /* We are getting a weird phandle from OF ... */
+ /* ... So use the full path instead */
+ name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL) {
+ pr_debug(" no linux,stdout-path !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_path(name);
+ if (!prom_stdout) {
+ pr_debug(" can't find stdout package %s !\n", name);
+ return -ENODEV;
+ }
+ pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+ name = of_get_property(prom_stdout, "name", NULL);
+ if (!name) {
+ pr_debug(" stdout package has no name !\n");
+ goto not_found;
+ }
+
+ if (strcmp(name, "ch-a") == 0)
+ offset = 0;
+ else if (strcmp(name, "ch-b") == 0)
+ offset = 1;
+ else
+ goto not_found;
+ of_node_put(prom_stdout);
+
+ pr_debug("Found serial console at %s%d\n", devname, offset);
+
+ return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+ pr_debug("No preferred console found !\n");
+ of_node_put(prom_stdout);
+ return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
-device_initcall(pmac_declare_of_platform_devices);
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
/*
* Called very early, MMU is off, device-tree isn't unflattened
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 1;
DMA_MODE_WRITE = 2;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PMAC_SMU
/* Move that to pci.c */
static int pmac_pci_probe_mode(struct pci_bus *bus)
{
- struct device_node *node = bus->sysdata;
+ struct device_node *node = pci_bus_to_OF_node(bus);
/* We need to use normal PCI probing for the AGP bus,
* since the device for the AGP bridge isn't in the tree.
+ * Same for the PCIe host on U4 and the HT host bridge.
*/
- if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
- device_is_compatible(node, "u4-pcie")))
+ if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+ of_device_is_compatible(node, "u4-pcie") ||
+ of_device_is_compatible(node, "u3-ht")))
return PCI_PROBE_NORMAL;
return PCI_PROBE_DEVTREE;
}
.pci_probe_mode = pmac_pci_probe_mode,
.power_save = power4_idle,
.enable_pmcs = power4_enable_pmcs,
-#ifdef CONFIG_KEXEC
- .machine_kexec = default_machine_kexec,
- .machine_kexec_prepare = default_machine_kexec_prepare,
- .machine_crash_shutdown = default_machine_crash_shutdown,
-#endif
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
.pcibios_enable_device_hook = pmac_pci_enable_device_hook,
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
.cpu_die = pmac_cpu_die,
#endif
+#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
+ .cpu_die = generic_mach_cpu_die,
+#endif
};