#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/utsrelease.h>
+#include <generated/utsrelease.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
-#include <linux/module.h>
#include <linux/timer.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
-#include <asm/gg2.h>
#include <asm/pci-bridge.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
#include "chrp.h"
+#include "gg2.h"
void rtas_indicator_progress(char *, unsigned short);
DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
unsigned long event_scan_interval;
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems. -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
extern unsigned long loops_per_jiffy;
/* To be replaced by RTAS when available */
seq_printf(m, "machine\t\t: CHRP %s\n", model);
/* longtrail (goldengate) stuff */
- if (!strncmp(model, "IBM,LongTrail", 13)) {
+ if (model && !strncmp(model, "IBM,LongTrail", 13)) {
/* VLSI VAS96011/12 `Golden Gate 2' */
/* Memory banks */
sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
static void __init sio_init(void)
{
struct device_node *root;
+ const char *model;
- if ((root = of_find_node_by_path("/")) &&
- !strncmp(of_get_property(root, "model", NULL),
- "IBM,LongTrail", 13)) {
+ root = of_find_node_by_path("/");
+ if (!root)
+ return;
+
+ model = of_get_property(root, "model", NULL);
+ if (model && !strncmp(model, "IBM,LongTrail", 13)) {
/* logical device 0 (KBC/Keyboard) */
sio_fixup_irq("keyboard", 0, 1, 2);
/* select logical device 1 (KBC/Mouse) */
sio_fixup_irq("mouse", 1, 12, 2);
}
+
of_node_put(root);
}
for(;;);
}
+/*
+ * Per default, input/output-device points to the keyboard/screen
+ * If no card is installed, the built-in serial port is used as a fallback.
+ * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
+ * the the built-in serial node. Instead, a /failsafe node is created.
+ */
+static void chrp_init_early(void)
+{
+ struct device_node *node;
+ const char *property;
+
+ if (strstr(cmd_line, "console="))
+ return;
+ /* find the boot console from /chosen/stdout */
+ if (!of_chosen)
+ return;
+ node = of_find_node_by_path("/");
+ if (!node)
+ return;
+ property = of_get_property(node, "model", NULL);
+ if (!property)
+ goto out_put;
+ if (strcmp(property, "Pegasos2"))
+ goto out_put;
+ /* this is a Pegasos2 */
+ property = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (!property)
+ goto out_put;
+ of_node_put(node);
+ node = of_find_node_by_path(property);
+ if (!node)
+ return;
+ property = of_get_property(node, "device_type", NULL);
+ if (!property)
+ goto out_put;
+ if (strcmp(property, "serial"))
+ goto out_put;
+ /*
+ * The 9pin connector is either /failsafe
+ * or /pci@80000000/isa@C/serial@i2F8
+ * The optional graphics card has also type 'serial' in VGA mode.
+ */
+ property = of_get_property(node, "name", NULL);
+ if (!property)
+ goto out_put;
+ if (!strcmp(property, "failsafe") || !strcmp(property, "serial"))
+ add_preferred_console("ttyS", 0, NULL);
+out_put:
+ of_node_put(node);
+}
+
void __init chrp_setup_arch(void)
{
struct device_node *root = of_find_node_by_path("/");
ppc_md.set_rtc_time = rtas_set_rtc_time;
}
-#ifdef CONFIG_BLK_DEV_INITRD
- /* this is fine for chrp */
- initrd_below_start_ok = 1;
-
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
- ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
/* On pegasos, enable the L2 cache if not already done by OF */
pegasos_set_l2cr();
if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
}
-void
-chrp_event_scan(unsigned long unused)
-{
- unsigned char log[1024];
- int ret = 0;
-
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024);
- mod_timer(&__get_cpu_var(heartbeat_timer),
- jiffies + event_scan_interval);
-}
-
static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq = i8259_irq();
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
static struct irqaction xmon_irqaction = {
.handler = xmon_irq,
- .mask = CPU_MASK_NONE,
.name = "XMON break",
};
#endif
/* Look for cascade */
for_each_node_by_type(np, "interrupt-controller")
- if (device_is_compatible(np, "chrp,iic")) {
+ if (of_device_is_compatible(np, "chrp,iic")) {
pic = np;
break;
}
* Also, Pegasos-type platforms don't have a proper node to start
* from anyway
*/
- for (np = find_devices("pci"); np != NULL; np = np->next) {
+ for_each_node_by_name(np, "pci") {
const unsigned int *addrp = of_get_property(np,
"8259-interrupt-acknowledge", NULL);
chrp_int_ack = addrp[of_n_addr_cells(np)-1];
break;
}
+ of_node_put(np);
if (np == NULL)
printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
" address, polling\n");
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
/* see if there is a keyboard in the device tree
with a parent of type "adb" */
- for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
+ for_each_node_by_name(kbd, "keyboard")
if (kbd->parent && kbd->parent->type
&& strcmp(kbd->parent->type, "adb") == 0)
break;
+ of_node_put(kbd);
if (kbd)
setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
#endif
void __init
chrp_init2(void)
{
- struct device_node *device;
- const unsigned int *p = NULL;
-
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = find_devices("rtas");
- if (device)
- p = of_get_property(device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- /*
- * Arrange to call chrp_event_scan at least *p times
- * per minute. We use 59 rather than 60 here so that
- * the rate will be slightly higher than the minimum.
- * This all assumes we don't do hotplug CPU on any
- * machine that needs the event scans done.
- */
- unsigned long interval, offset;
- int cpu, ncpus;
- struct timer_list *timer;
-
- interval = HZ * 59 / *p;
- offset = HZ;
- ncpus = num_online_cpus();
- event_scan_interval = ncpus * interval;
- for (cpu = 0; cpu < ncpus; ++cpu) {
- timer = &per_cpu(heartbeat_timer, cpu);
- setup_timer(timer, chrp_event_scan, 0);
- timer->expires = jiffies + offset;
- add_timer_on(timer, cpu);
- offset += interval;
- }
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, interval);
- }
-
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
.probe = chrp_probe,
.setup_arch = chrp_setup_arch,
.init = chrp_init2,
+ .init_early = chrp_init_early,
.show_cpuinfo = chrp_show_cpuinfo,
.init_IRQ = chrp_init_IRQ,
.restart = rtas_restart,