#include <asm/sections.h>
#include <asm/machdep.h>
-#ifdef CONFIG_LOGO_LINUX_CLUT224
#include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
/*
* Properties whose value is longer than this get excluded from our
static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
+static unsigned long __initdata prom_memory_limit;
+
static unsigned long __initdata alloc_top;
static unsigned long __initdata alloc_top_high;
static unsigned long __initdata alloc_bottom;
static void __init early_cmdline_parse(void)
{
struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
const char *opt;
-#endif
+
char *p;
int l = 0;
RELOC(prom_iommu_force_on) = 1;
}
#endif
+ opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+ if (opt) {
+ opt += 4;
+ RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+ /* Align to 16 MB == size of ppc64 large page */
+ RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+ }
}
#ifdef CONFIG_PPC_PSERIES
#else
#define OV5_CMO 0x00
#endif
+#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
+
+/* Option Vector 6: IBM PAPR hints */
+#define OV6_LINUX 0x02 /* Linux is our OS */
/*
* The architecture vector has an array of PVR mask/value pairs,
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */
W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */
- 5 - 1, /* 5 option vectors */
+ 6 - 1, /* 6 option vectors */
/* option vector 1: processor architectures supported */
3 - 2, /* length */
W(0xffffffff), /* virt_base */
W(0xffffffff), /* virt_size */
W(0xffffffff), /* load_base */
- W(64), /* 128MB min RMA */
+ W(64), /* 64MB min RMA */
W(0xffffffff), /* full client load */
0, /* min RMA percentage of total RAM */
48, /* max log_2(hash table size) */
0, /* don't halt */
/* option vector 5: PAPR/OF options */
- 5 - 2, /* length */
+ 13 - 2, /* length */
0, /* don't ignore, don't halt */
OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
0,
OV5_CMO,
+ OV5_TYPE1_AFFINITY,
+ 0,
+ 0,
+ 0,
+ /* WARNING: The offset of the "number of cores" field below
+ * must match by the macro below. Update the definition if
+ * the structure layout changes.
+ */
+#define IBM_ARCH_VEC_NRCORES_OFFSET 100
+ W(NR_CPUS), /* number of cores supported */
+
+ /* option vector 6: IBM PAPR hints */
+ 4 - 2, /* length */
+ 0,
+ 0,
+ OV6_LINUX,
+
};
/* Old method - ELF header with PT_NOTE sections */
}
};
+static int __init prom_count_smt_threads(void)
+{
+ phandle node;
+ char type[64];
+ unsigned int plen;
+
+ /* Pick up th first CPU node we can find */
+ for (node = 0; prom_next_node(&node); ) {
+ type[0] = 0;
+ prom_getprop(node, "device_type", type, sizeof(type));
+
+ if (strcmp(type, RELOC("cpu")))
+ continue;
+ /*
+ * There is an entry for each smt thread, each entry being
+ * 4 bytes long. All cpus should have the same number of
+ * smt threads, so return after finding the first.
+ */
+ plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s");
+ if (plen == PROM_ERROR)
+ break;
+ plen >>= 2;
+ prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen);
+
+ /* Sanity check */
+ if (plen < 1 || plen > 64) {
+ prom_printf("Threads per core 0x%x out of bounds, assuming 1\n",
+ (unsigned long)plen);
+ return 1;
+ }
+ return plen;
+ }
+ prom_debug("No threads found, assuming 1 per core\n");
+
+ return 1;
+
+}
+
+
static void __init prom_send_capabilities(void)
{
ihandle elfloader, root;
prom_arg_t ret;
+ u32 *cores;
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
+ /* We need to tell the FW about the number of cores we support.
+ *
+ * To do that, we count the number of threads on the first core
+ * (we assume this is the same for all cores) and use it to
+ * divide NR_CPUS.
+ */
+ cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]);
+ if (*cores != NR_CPUS) {
+ prom_printf("WARNING ! "
+ "ibm_architecture_vec structure inconsistent: 0x%x !\n",
+ *cores);
+ } else {
+ *cores = NR_CPUS / prom_count_smt_threads();
+ prom_printf("Max number of cores passed to firmware: 0x%x\n",
+ (unsigned long)*cores);
+ }
+
/* try calling the ibm,client-architecture-support method */
+ prom_printf("Calling ibm,client-architecture-support...");
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
root,
ADDR(ibm_architecture_vec)) == 0) {
/* the call exists... */
if (ret)
- prom_printf("WARNING: ibm,client-architecture"
+ prom_printf("\nWARNING: ibm,client-architecture"
"-support call FAILED!\n");
call_prom("close", 1, 0, root);
+ prom_printf(" done\n");
return;
}
call_prom("close", 1, 0, root);
+ prom_printf(" not implemented\n");
}
/* no ibm,client-architecture-support call, try the old way */
}
/*
+ * If prom_memory_limit is set we reduce the upper limits *except* for
+ * alloc_top_high. This must be the real top of RAM so we can put
+ * TCE's up there.
+ */
+
+ RELOC(alloc_top_high) = RELOC(ram_top);
+
+ if (RELOC(prom_memory_limit)) {
+ if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+ prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+ prom_printf("Ignoring mem=%x >= ram_top.\n",
+ RELOC(prom_memory_limit));
+ RELOC(prom_memory_limit) = 0;
+ } else {
+ RELOC(ram_top) = RELOC(prom_memory_limit);
+ RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+ }
+ }
+
+ /*
* Setup our top alloc point, that is top of RMO or top of
* segment 0 when running non-LPAR.
* Some RS64 machines have buggy firmware where claims up at
RELOC(alloc_top_high) = RELOC(ram_top);
prom_printf("memory layout at init:\n");
+ prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom));
prom_printf(" alloc_top : %x\n", RELOC(alloc_top));
prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high));
return;
}
- prom_printf("instantiating rtas at 0x%x ...", base);
+ prom_printf("instantiating rtas at 0x%x...", base);
if (call_prom_ret("call-method", 3, 2, &entry,
ADDR("instantiate-rtas"),
/* Initialize the table to have a one-to-one mapping
* over the allocated size.
*/
- tce_entryp = (unsigned long *)base;
+ tce_entryp = (u64 *)base;
for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) {
tce_entry = (i << PAGE_SHIFT);
tce_entry |= 0x3;
*
* -- Cort
*/
-extern void __secondary_hold(void);
-extern unsigned long __secondary_hold_spinloop;
-extern unsigned long __secondary_hold_acknowledge;
-
/*
* We want to reference the copy of __secondary_hold_* in the
* 0 - 0x100 address range
= (void *) LOW_ADDR(__secondary_hold_spinloop);
unsigned long *acknowledge
= (void *) LOW_ADDR(__secondary_hold_acknowledge);
-#ifdef CONFIG_PPC64
- /* __secondary_hold is actually a descriptor, not the text address */
- unsigned long secondary_hold
- = __pa(*PTRRELOC((unsigned long *)__secondary_hold));
-#else
unsigned long secondary_hold = LOW_ADDR(__secondary_hold);
-#endif
prom_debug("prom_hold_cpus: start...\n");
prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop);
return PLATFORM_GENERIC;
x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
- prom_printf("Hypertas detected, assuming LPAR !\n");
+ prom_debug("Hypertas detected, assuming LPAR !\n");
return PLATFORM_PSERIES_LPAR;
}
return PLATFORM_PSERIES;
};
const unsigned char *clut;
- prom_printf("Looking for displays\n");
+ prom_debug("Looking for displays\n");
for (node = 0; prom_next_node(&node); ) {
memset(type, 0, sizeof(type));
prom_getprop(node, "device_type", type, sizeof(type));
if (call_prom("package-to-path", 3, 1, node, path,
PROM_SCRATCH_SIZE-10) == PROM_ERROR)
continue;
- prom_printf("found display : %s, opening ... ", path);
+ prom_printf("found display : %s, opening... ", path);
ih = call_prom("open", 1, 1, path);
if (ih == 0) {
prom_setprop(isa, name, "ranges",
isa_ranges, sizeof(isa_ranges));
}
+
+#define CPC925_MC_START 0xf8000000
+#define CPC925_MC_LENGTH 0x1000000
+/* The values for memory-controller don't have right number of cells */
+static void __init fixup_device_tree_maple_memory_controller(void)
+{
+ phandle mc;
+ u32 mc_reg[4];
+ char *name = "/hostbridge@f8000000";
+ struct prom_t *_prom = &RELOC(prom);
+ u32 ac, sc;
+
+ mc = call_prom("finddevice", 1, 1, ADDR(name));
+ if (!PHANDLE_VALID(mc))
+ return;
+
+ if (prom_getproplen(mc, "reg") != 8)
+ return;
+
+ prom_getprop(_prom->root, "#address-cells", &ac, sizeof(ac));
+ prom_getprop(_prom->root, "#size-cells", &sc, sizeof(sc));
+ if ((ac != 2) || (sc != 2))
+ return;
+
+ if (prom_getprop(mc, "reg", mc_reg, sizeof(mc_reg)) == PROM_ERROR)
+ return;
+
+ if (mc_reg[0] != CPC925_MC_START || mc_reg[1] != CPC925_MC_LENGTH)
+ return;
+
+ prom_printf("Fixing up bogus hostbridge on Maple...\n");
+
+ mc_reg[0] = 0x0;
+ mc_reg[1] = CPC925_MC_START;
+ mc_reg[2] = 0x0;
+ mc_reg[3] = CPC925_MC_LENGTH;
+ prom_setprop(mc, name, "reg", mc_reg, sizeof(mc_reg));
+}
#else
#define fixup_device_tree_maple()
+#define fixup_device_tree_maple_memory_controller()
#endif
#ifdef CONFIG_PPC_CHRP
static void __init fixup_device_tree(void)
{
fixup_device_tree_maple();
+ fixup_device_tree_maple_memory_controller();
fixup_device_tree_chrp();
fixup_device_tree_pmac();
fixup_device_tree_efika();
unsigned long __init prom_init(unsigned long r3, unsigned long r4,
unsigned long pp,
- unsigned long r6, unsigned long r7)
+ unsigned long r6, unsigned long r7,
+ unsigned long kbase)
{
struct prom_t *_prom;
unsigned long hdr;
- unsigned long offset = reloc_offset();
#ifdef CONFIG_PPC32
+ unsigned long offset = reloc_offset();
reloc_got2(offset);
#endif
*/
prom_init_stdout();
+ prom_printf("Preparing to boot %s", RELOC(linux_banner));
+
/*
* Get default machine type. At this point, we do not differentiate
* between pSeries SMP and pSeries LPAR
*/
RELOC(of_platform) = prom_find_machine_type();
+#ifndef CONFIG_RELOCATABLE
/* Bail if this is a kdump kernel. */
if (PHYSICAL_START > 0)
prom_panic("Error: You can't boot a kdump kernel from OF!\n");
+#endif
/*
* Check for an initrd
* Copy the CPU hold code
*/
if (RELOC(of_platform) != PLATFORM_POWERMAC)
- copy_and_flush(0, KERNELBASE + offset, 0x100, 0);
+ copy_and_flush(0, kbase, 0x100, 0);
/*
* Do early parsing of command line
/*
* Fill in some infos for use by the kernel later on
*/
+ if (RELOC(prom_memory_limit))
+ prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+ &RELOC(prom_memory_limit),
+ sizeof(prom_memory_limit));
#ifdef CONFIG_PPC64
if (RELOC(prom_iommu_off))
prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
/*
* Now finally create the flattened device-tree
*/
- prom_printf("copying OF device tree ...\n");
+ prom_printf("copying OF device tree...\n");
flatten_device_tree();
/*
* Call OF "quiesce" method to shut down pending DMA's from
* devices etc...
*/
- prom_printf("Calling quiesce ...\n");
+ prom_printf("Calling quiesce...\n");
call_prom("quiesce", 0, 0);
/*
reloc_got2(-offset);
#endif
- __start(hdr, KERNELBASE + offset, 0);
+ __start(hdr, kbase, 0);
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff