powerpc/pci: Fix MODPOST warning
[safe/jmp/linux-2.6] / arch / powerpc / kernel / pci-common.c
index 0245c98..e8dfdbd 100644 (file)
@@ -16,8 +16,6 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#undef DEBUG
-
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/string.h>
 #include <asm/machdep.h>
 #include <asm/ppc-pci.h>
 #include <asm/firmware.h>
-
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
+#include <asm/eeh.h>
 
 static DEFINE_SPINLOCK(hose_spinlock);
+LIST_HEAD(hose_list);
 
 /* XXX kill that some day ... */
 static int global_phb_number;          /* Global phb counter */
@@ -53,6 +46,37 @@ static int global_phb_number;                /* Global phb counter */
 /* ISA Memory physical address */
 resource_size_t isa_mem_base;
 
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int ppc_pci_flags = 0;
+
+
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
+
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
+{
+       pci_dma_ops = dma_ops;
+}
+
+struct dma_map_ops *get_pci_dma_ops(void)
+{
+       return pci_dma_ops;
+}
+EXPORT_SYMBOL(get_pci_dma_ops);
+
+int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
+{
+       return dma_set_mask(&dev->dev, mask);
+}
+
+int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+       int rc;
+
+       rc = dma_set_mask(&dev->dev, mask);
+       dev->dev.coherent_dma_mask = dev->dma_mask;
+
+       return rc;
+}
 
 struct pci_controller *pcibios_alloc_controller(struct device_node *dev)
 {
@@ -90,19 +114,24 @@ void pcibios_free_controller(struct pci_controller *phb)
                kfree(phb);
 }
 
+static resource_size_t pcibios_io_size(const struct pci_controller *hose)
+{
+#ifdef CONFIG_PPC64
+       return hose->pci_io_size;
+#else
+       return hose->io_resource.end - hose->io_resource.start + 1;
+#endif
+}
+
 int pcibios_vaddr_is_ioport(void __iomem *address)
 {
        int ret = 0;
        struct pci_controller *hose;
-       unsigned long size;
+       resource_size_t size;
 
        spin_lock(&hose_spinlock);
        list_for_each_entry(hose, &hose_list, list_node) {
-#ifdef CONFIG_PPC64
-               size = hose->pci_io_size;
-#else
-               size = hose->io_resource.end - hose->io_resource.start + 1;
-#endif
+               size = pcibios_io_size(hose);
                if (address >= hose->io_base_virt &&
                    address < (hose->io_base_virt + size)) {
                        ret = 1;
@@ -113,6 +142,29 @@ int pcibios_vaddr_is_ioport(void __iomem *address)
        return ret;
 }
 
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+       struct pci_controller *hose;
+       resource_size_t size;
+       unsigned long ret = ~0;
+
+       spin_lock(&hose_spinlock);
+       list_for_each_entry(hose, &hose_list, list_node) {
+               size = pcibios_io_size(hose);
+               if (address >= hose->io_base_phys &&
+                   address < (hose->io_base_phys + size)) {
+                       unsigned long base =
+                               (unsigned long)hose->io_base_virt - _IO_BASE;
+                       ret = base + (address - hose->io_base_phys);
+                       break;
+               }
+       }
+       spin_unlock(&hose_spinlock);
+
+       return ret;
+}
+EXPORT_SYMBOL_GPL(pci_address_to_pio);
+
 /*
  * Return the domain number for this bus.
  */
@@ -124,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_domain_nr);
 
-#ifdef CONFIG_PPC_OF
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -135,8 +185,6 @@ EXPORT_SYMBOL(pci_domain_nr);
  */
 struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
 {
-       if (!have_of)
-               return NULL;
        while(node) {
                struct pci_controller *hose, *tmp;
                list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
@@ -160,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev,
        return sprintf(buf, "%s", np->full_name);
 }
 static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
 int pcibios_add_platform_entries(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PPC_OF
        return device_create_file(&pdev->dev, &dev_attr_devspec);
-#else
-       return 0;
-#endif /* CONFIG_PPC_OF */
-
 }
 
 char __devinit *pcibios_setup(char *str)
@@ -188,7 +230,21 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
        struct of_irq oirq;
        unsigned int virq;
 
-       DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+       /* The current device-tree that iSeries generates from the HV
+        * PCI informations doesn't contain proper interrupt routing,
+        * and all the fallback would do is print out crap, so we
+        * don't attempt to resolve the interrupts here at all, some
+        * iSeries specific fixup does it.
+        *
+        * In the long run, we will hopefully fix the generated device-tree
+        * instead.
+        */
+#ifdef CONFIG_PPC_ISERIES
+       if (firmware_has_feature(FW_FEATURE_ISERIES))
+               return -1;
+#endif
+
+       pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
 
 #ifdef DEBUG
        memset(&oirq, 0xff, sizeof(oirq));
@@ -209,28 +265,30 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
                if (pin == 0)
                        return -1;
                if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
-                   line == 0xff) {
+                   line == 0xff || line == 0) {
                        return -1;
                }
-               DBG(" -> no map ! Using irq line %d from PCI config\n", line);
+               pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+                        line, pin);
 
                virq = irq_create_mapping(NULL, line);
                if (virq != NO_IRQ)
                        set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
        } else {
-               DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-                   oirq.size, oirq.specifier[0], oirq.specifier[1],
-                   oirq.controller->full_name);
+               pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+                        oirq.size, oirq.specifier[0], oirq.specifier[1],
+                        oirq.controller ? oirq.controller->full_name :
+                        "<default>");
 
                virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
                                             oirq.size);
        }
        if(virq == NO_IRQ) {
-               DBG(" -> failed to map !\n");
+               pr_debug(" Failed to map !\n");
                return -1;
        }
 
-       DBG(" -> mapped to linux irq %d\n", virq);
+       pr_debug(" Mapped to linux irq %d\n", virq);
 
        pci_dev->irq = virq;
 
@@ -332,13 +390,10 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
        }
 
        /* XXX would be nice to have a way to ask for write-through */
-       prot |= _PAGE_NO_CACHE;
        if (write_combine)
-               prot &= ~_PAGE_GUARDED;
+               return pgprot_noncached_wc(prot);
        else
-               prot |= _PAGE_GUARDED;
-
-       return __pgprot(prot);
+               return pgprot_noncached(prot);
 }
 
 /*
@@ -349,19 +404,17 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 pgprot_t pci_phys_mem_access_prot(struct file *file,
                                  unsigned long pfn,
                                  unsigned long size,
-                                 pgprot_t protection)
+                                 pgprot_t prot)
 {
        struct pci_dev *pdev = NULL;
        struct resource *found = NULL;
-       unsigned long prot = pgprot_val(protection);
-       unsigned long offset = pfn << PAGE_SHIFT;
+       resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
        int i;
 
        if (page_is_ram(pfn))
-               return __pgprot(prot);
-
-       prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+               return prot;
 
+       prot = pgprot_noncached(prot);
        for_each_pci_dev(pdev) {
                for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
                        struct resource *rp = &pdev->resource[i];
@@ -382,13 +435,14 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
        }
        if (found) {
                if (found->flags & IORESOURCE_PREFETCH)
-                       prot &= ~_PAGE_GUARDED;
+                       prot = pgprot_noncached_wc(prot);
                pci_dev_put(pdev);
        }
 
-       DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+       pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+                (unsigned long long)offset, pgprot_val(prot));
 
-       return __pgprot(prot);
+       return prot;
 }
 
 
@@ -405,7 +459,8 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
                        enum pci_mmap_state mmap_state, int write_combine)
 {
-       resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
+       resource_size_t offset =
+               ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
        struct resource *rp;
        int ret;
 
@@ -424,6 +479,144 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
        return ret;
 }
 
+/* This provides legacy IO read access on a bus */
+int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
+{
+       unsigned long offset;
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       struct resource *rp = &hose->io_resource;
+       void __iomem *addr;
+
+       /* Check if port can be supported by that bus. We only check
+        * the ranges of the PHB though, not the bus itself as the rules
+        * for forwarding legacy cycles down bridges are not our problem
+        * here. So if the host bridge supports it, we do it.
+        */
+       offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+       offset += port;
+
+       if (!(rp->flags & IORESOURCE_IO))
+               return -ENXIO;
+       if (offset < rp->start || (offset + size) > rp->end)
+               return -ENXIO;
+       addr = hose->io_base_virt + port;
+
+       switch(size) {
+       case 1:
+               *((u8 *)val) = in_8(addr);
+               return 1;
+       case 2:
+               if (port & 1)
+                       return -EINVAL;
+               *((u16 *)val) = in_le16(addr);
+               return 2;
+       case 4:
+               if (port & 3)
+                       return -EINVAL;
+               *((u32 *)val) = in_le32(addr);
+               return 4;
+       }
+       return -EINVAL;
+}
+
+/* This provides legacy IO write access on a bus */
+int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
+{
+       unsigned long offset;
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       struct resource *rp = &hose->io_resource;
+       void __iomem *addr;
+
+       /* Check if port can be supported by that bus. We only check
+        * the ranges of the PHB though, not the bus itself as the rules
+        * for forwarding legacy cycles down bridges are not our problem
+        * here. So if the host bridge supports it, we do it.
+        */
+       offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+       offset += port;
+
+       if (!(rp->flags & IORESOURCE_IO))
+               return -ENXIO;
+       if (offset < rp->start || (offset + size) > rp->end)
+               return -ENXIO;
+       addr = hose->io_base_virt + port;
+
+       /* WARNING: The generic code is idiotic. It gets passed a pointer
+        * to what can be a 1, 2 or 4 byte quantity and always reads that
+        * as a u32, which means that we have to correct the location of
+        * the data read within those 32 bits for size 1 and 2
+        */
+       switch(size) {
+       case 1:
+               out_8(addr, val >> 24);
+               return 1;
+       case 2:
+               if (port & 1)
+                       return -EINVAL;
+               out_le16(addr, val >> 16);
+               return 2;
+       case 4:
+               if (port & 3)
+                       return -EINVAL;
+               out_le32(addr, val);
+               return 4;
+       }
+       return -EINVAL;
+}
+
+/* This provides legacy IO or memory mmap access on a bus */
+int pci_mmap_legacy_page_range(struct pci_bus *bus,
+                              struct vm_area_struct *vma,
+                              enum pci_mmap_state mmap_state)
+{
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       resource_size_t offset =
+               ((resource_size_t)vma->vm_pgoff) << PAGE_SHIFT;
+       resource_size_t size = vma->vm_end - vma->vm_start;
+       struct resource *rp;
+
+       pr_debug("pci_mmap_legacy_page_range(%04x:%02x, %s @%llx..%llx)\n",
+                pci_domain_nr(bus), bus->number,
+                mmap_state == pci_mmap_mem ? "MEM" : "IO",
+                (unsigned long long)offset,
+                (unsigned long long)(offset + size - 1));
+
+       if (mmap_state == pci_mmap_mem) {
+               /* Hack alert !
+                *
+                * Because X is lame and can fail starting if it gets an error trying
+                * to mmap legacy_mem (instead of just moving on without legacy memory
+                * access) we fake it here by giving it anonymous memory, effectively
+                * behaving just like /dev/zero
+                */
+               if ((offset + size) > hose->isa_mem_size) {
+                       printk(KERN_DEBUG
+                              "Process %s (pid:%d) mapped non-existing PCI legacy memory for 0%04x:%02x\n",
+                              current->comm, current->pid, pci_domain_nr(bus), bus->number);
+                       if (vma->vm_flags & VM_SHARED)
+                               return shmem_zero_setup(vma);
+                       return 0;
+               }
+               offset += hose->isa_mem_phys;
+       } else {
+               unsigned long io_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               unsigned long roffset = offset + io_offset;
+               rp = &hose->io_resource;
+               if (!(rp->flags & IORESOURCE_IO))
+                       return -ENXIO;
+               if (roffset < rp->start || (roffset + size) > rp->end)
+                       return -ENXIO;
+               offset += hose->io_base_phys;
+       }
+       pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
+
+       vma->vm_pgoff = offset >> PAGE_SHIFT;
+       vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+       return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+                              vma->vm_end - vma->vm_start,
+                              vma->vm_page_prot);
+}
+
 void pci_resource_to_user(const struct pci_dev *dev, int bar,
                          const struct resource *rsrc,
                          resource_size_t *start, resource_size_t *end)
@@ -526,6 +719,12 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
                cpu_addr = of_translate_address(dev, ranges + 3);
                size = of_read_number(ranges + pna + 3, 2);
                ranges += np;
+
+               /* If we failed translation or got a zero-sized region
+                * (some FW try to feed us with non sensical zero sized regions
+                * such as power3 which look like some kind of attempt at exposing
+                * the VGA memory hole)
+                */
                if (cpu_addr == OF_BAD_ADDR || size == 0)
                        continue;
 
@@ -581,6 +780,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
                        res->start = pci_addr;
                        break;
                case 2:         /* PCI Memory space */
+               case 3:         /* PCI 64 bits Memory space */
                        printk(KERN_INFO
                               " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
                               cpu_addr, cpu_addr + size - 1, pci_addr,
@@ -598,6 +798,8 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
                                isa_hole = memno;
                                if (primary || isa_mem_base == 0)
                                        isa_mem_base = cpu_addr;
+                               hose->isa_mem_phys = cpu_addr;
+                               hose->isa_mem_size = size;
                        }
 
                        /* We get the PCI/Mem offset from the first range or
@@ -632,11 +834,18 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
                }
        }
 
-       /* Out of paranoia, let's put the ISA hole last if any */
-       if (isa_hole >= 0 && memno > 0 && isa_hole != (memno-1)) {
-               struct resource tmp = hose->mem_resources[isa_hole];
-               hose->mem_resources[isa_hole] = hose->mem_resources[memno-1];
-               hose->mem_resources[memno-1] = tmp;
+       /* If there's an ISA hole and the pci_mem_offset is -not- matching
+        * the ISA hole offset, then we need to remove the ISA hole from
+        * the resource list for that brige
+        */
+       if (isa_hole >= 0 && hose->pci_mem_offset != isa_mb) {
+               unsigned int next = isa_hole + 1;
+               printk(KERN_INFO " Removing ISA hole at 0x%016llx\n", isa_mb);
+               if (next < memno)
+                       memmove(&hose->mem_resources[isa_hole],
+                               &hose->mem_resources[next],
+                               sizeof(struct resource) * (memno - next));
+               hose->mem_resources[--memno].flags = 0;
        }
 }
 
@@ -644,15 +853,12 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 int pci_proc_domain(struct pci_bus *bus)
 {
        struct pci_controller *hose = pci_bus_to_host(bus);
-#ifdef CONFIG_PPC64
-       return hose->buid != 0;
-#else
+
        if (!(ppc_pci_flags & PPC_PCI_ENABLE_PROC_DOMAINS))
                return 0;
        if (ppc_pci_flags & PPC_PCI_COMPAT_DOMAIN_0)
                return hose->global_number != 0;
        return 1;
-#endif
 }
 
 void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
@@ -691,3 +897,843 @@ void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
        res->end = (region->end + offset) & mask;
 }
 EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/* Fixup a bus resource into a linux resource */
+static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev)
+{
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+       resource_size_t offset = 0, mask = (resource_size_t)-1;
+
+       if (res->flags & IORESOURCE_IO) {
+               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               mask = 0xffffffffu;
+       } else if (res->flags & IORESOURCE_MEM)
+               offset = hose->pci_mem_offset;
+
+       res->start = (res->start + offset) & mask;
+       res->end = (res->end + offset) & mask;
+}
+
+
+/* This header fixup will do the resource fixup for all devices as they are
+ * probed, but not for bridge ranges
+ */
+static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
+{
+       struct pci_controller *hose = pci_bus_to_host(dev->bus);
+       int i;
+
+       if (!hose) {
+               printk(KERN_ERR "No host bridge for PCI dev %s !\n",
+                      pci_name(dev));
+               return;
+       }
+       for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+               struct resource *res = dev->resource + i;
+               if (!res->flags)
+                       continue;
+               /* On platforms that have PPC_PCI_PROBE_ONLY set, we don't
+                * consider 0 as an unassigned BAR value. It's technically
+                * a valid value, but linux doesn't like it... so when we can
+                * re-assign things, we do so, but if we can't, we keep it
+                * around and hope for the best...
+                */
+               if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
+                       pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
+                                pci_name(dev), i,
+                                (unsigned long long)res->start,
+                                (unsigned long long)res->end,
+                                (unsigned int)res->flags);
+                       res->end -= res->start;
+                       res->start = 0;
+                       res->flags |= IORESOURCE_UNSET;
+                       continue;
+               }
+
+               pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n",
+                        pci_name(dev), i,
+                        (unsigned long long)res->start,\
+                        (unsigned long long)res->end,
+                        (unsigned int)res->flags);
+
+               fixup_resource(res, dev);
+
+               pr_debug("PCI:%s            %016llx-%016llx\n",
+                        pci_name(dev),
+                        (unsigned long long)res->start,
+                        (unsigned long long)res->end);
+       }
+
+       /* Call machine specific resource fixup */
+       if (ppc_md.pcibios_fixup_resources)
+               ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+/* This function tries to figure out if a bridge resource has been initialized
+ * by the firmware or not. It doesn't have to be absolutely bullet proof, but
+ * things go more smoothly when it gets it right. It should covers cases such
+ * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges
+ */
+static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus,
+                                                          struct resource *res)
+{
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       struct pci_dev *dev = bus->self;
+       resource_size_t offset;
+       u16 command;
+       int i;
+
+       /* We don't do anything if PCI_PROBE_ONLY is set */
+       if (ppc_pci_flags & PPC_PCI_PROBE_ONLY)
+               return 0;
+
+       /* Job is a bit different between memory and IO */
+       if (res->flags & IORESOURCE_MEM) {
+               /* If the BAR is non-0 (res != pci_mem_offset) then it's probably been
+                * initialized by somebody
+                */
+               if (res->start != hose->pci_mem_offset)
+                       return 0;
+
+               /* The BAR is 0, let's check if memory decoding is enabled on
+                * the bridge. If not, we consider it unassigned
+                */
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               if ((command & PCI_COMMAND_MEMORY) == 0)
+                       return 1;
+
+               /* Memory decoding is enabled and the BAR is 0. If any of the bridge
+                * resources covers that starting address (0 then it's good enough for
+                * us for memory
+                */
+               for (i = 0; i < 3; i++) {
+                       if ((hose->mem_resources[i].flags & IORESOURCE_MEM) &&
+                           hose->mem_resources[i].start == hose->pci_mem_offset)
+                               return 0;
+               }
+
+               /* Well, it starts at 0 and we know it will collide so we may as
+                * well consider it as unassigned. That covers the Apple case.
+                */
+               return 1;
+       } else {
+               /* If the BAR is non-0, then we consider it assigned */
+               offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+               if (((res->start - offset) & 0xfffffffful) != 0)
+                       return 0;
+
+               /* Here, we are a bit different than memory as typically IO space
+                * starting at low addresses -is- valid. What we do instead if that
+                * we consider as unassigned anything that doesn't have IO enabled
+                * in the PCI command register, and that's it.
+                */
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               if (command & PCI_COMMAND_IO)
+                       return 0;
+
+               /* It's starting at 0 and IO is disabled in the bridge, consider
+                * it unassigned
+                */
+               return 1;
+       }
+}
+
+/* Fixup resources of a PCI<->PCI bridge */
+static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
+{
+       struct resource *res;
+       int i;
+
+       struct pci_dev *dev = bus->self;
+
+       for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+               if ((res = bus->resource[i]) == NULL)
+                       continue;
+               if (!res->flags)
+                       continue;
+               if (i >= 3 && bus->self->transparent)
+                       continue;
+
+               pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n",
+                        pci_name(dev), i,
+                        (unsigned long long)res->start,\
+                        (unsigned long long)res->end,
+                        (unsigned int)res->flags);
+
+               /* Perform fixup */
+               fixup_resource(res, dev);
+
+               /* Try to detect uninitialized P2P bridge resources,
+                * and clear them out so they get re-assigned later
+                */
+               if (pcibios_uninitialized_bridge_resource(bus, res)) {
+                       res->flags = 0;
+                       pr_debug("PCI:%s            (unassigned)\n", pci_name(dev));
+               } else {
+
+                       pr_debug("PCI:%s            %016llx-%016llx\n",
+                                pci_name(dev),
+                                (unsigned long long)res->start,
+                                (unsigned long long)res->end);
+               }
+       }
+}
+
+void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
+{
+       /* Fix up the bus resources for P2P bridges */
+       if (bus->self != NULL)
+               pcibios_fixup_bridge(bus);
+
+       /* Platform specific bus fixups. This is currently only used
+        * by fsl_pci and I'm hoping to get rid of it at some point
+        */
+       if (ppc_md.pcibios_fixup_bus)
+               ppc_md.pcibios_fixup_bus(bus);
+
+       /* Setup bus DMA mappings */
+       if (ppc_md.pci_dma_bus_setup)
+               ppc_md.pci_dma_bus_setup(bus);
+}
+
+void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+
+       pr_debug("PCI: Fixup bus devices %d (%s)\n",
+                bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               struct dev_archdata *sd = &dev->dev.archdata;
+
+               /* Setup OF node pointer in archdata */
+               sd->of_node = pci_device_to_OF_node(dev);
+
+               /* Fixup NUMA node as it may not be setup yet by the generic
+                * code and is needed by the DMA init
+                */
+               set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+               /* Hook up default DMA ops */
+               sd->dma_ops = pci_dma_ops;
+               set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
+
+               /* Additional platform DMA/iommu setup */
+               if (ppc_md.pci_dma_dev_setup)
+                       ppc_md.pci_dma_dev_setup(dev);
+
+               /* Read default IRQs and fixup if necessary */
+               pci_read_irq_line(dev);
+               if (ppc_md.pci_irq_fixup)
+                       ppc_md.pci_irq_fixup(dev);
+       }
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+       /* When called from the generic PCI probe, read PCI<->PCI bridge
+        * bases. This is -not- called when generating the PCI tree from
+        * the OF device-tree.
+        */
+       if (bus->self != NULL)
+               pci_read_bridge_bases(bus);
+
+       /* Now fixup the bus bus */
+       pcibios_setup_bus_self(bus);
+
+       /* Now fixup devices on that bus */
+       pcibios_setup_bus_devices(bus);
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
+
+static int skip_isa_ioresource_align(struct pci_dev *dev)
+{
+       if ((ppc_pci_flags & PPC_PCI_CAN_SKIP_ISA_ALIGN) &&
+           !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
+               return 1;
+       return 0;
+}
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+                               resource_size_t size, resource_size_t align)
+{
+       struct pci_dev *dev = data;
+
+       if (res->flags & IORESOURCE_IO) {
+               resource_size_t start = res->start;
+
+               if (skip_isa_ioresource_align(dev))
+                       return;
+               if (start & 0x300) {
+                       start = (start + 0x3ff) & ~0x3ff;
+                       res->start = start;
+               }
+       }
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int reparent_resources(struct resource *parent,
+                                    struct resource *res)
+{
+       struct resource *p, **pp;
+       struct resource **firstpp = NULL;
+
+       for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+               if (p->end < res->start)
+                       continue;
+               if (res->end < p->start)
+                       break;
+               if (p->start < res->start || p->end > res->end)
+                       return -1;      /* not completely contained */
+               if (firstpp == NULL)
+                       firstpp = pp;
+       }
+       if (firstpp == NULL)
+               return -1;      /* didn't find any conflicting entries? */
+       res->parent = parent;
+       res->child = *firstpp;
+       res->sibling = *pp;
+       *firstpp = res;
+       *pp = NULL;
+       for (p = res->child; p != NULL; p = p->sibling) {
+               p->parent = res;
+               pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+                        p->name,
+                        (unsigned long long)p->start,
+                        (unsigned long long)p->end, res->name);
+       }
+       return 0;
+}
+
+/*
+ *  Handle resources of PCI devices.  If the world were perfect, we could
+ *  just allocate all the resource regions and do nothing more.  It isn't.
+ *  On the other hand, we cannot just re-allocate all devices, as it would
+ *  require us to know lots of host bridge internals.  So we attempt to
+ *  keep as much of the original configuration as possible, but tweak it
+ *  when it's found to be wrong.
+ *
+ *  Known BIOS problems we have to work around:
+ *     - I/O or memory regions not configured
+ *     - regions configured, but not enabled in the command register
+ *     - bogus I/O addresses above 64K used
+ *     - expansion ROMs left enabled (this may sound harmless, but given
+ *       the fact the PCI specs explicitly allow address decoders to be
+ *       shared between expansion ROMs and other resource regions, it's
+ *       at least dangerous)
+ *
+ *  Our solution:
+ *     (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ *         This gives us fixed barriers on where we can allocate.
+ *     (2) Allocate resources for all enabled devices.  If there is
+ *         a collision, just mark the resource as unallocated. Also
+ *         disable expansion ROMs during this step.
+ *     (3) Try to allocate resources for disabled devices.  If the
+ *         resources were assigned correctly, everything goes well,
+ *         if they weren't, they won't disturb allocation of other
+ *         resources.
+ *     (4) Assign new addresses to resources which were either
+ *         not configured at all or misconfigured.  If explicitly
+ *         requested by the user, configure expansion ROM address
+ *         as well.
+ */
+
+void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+       struct pci_bus *b;
+       int i;
+       struct resource *res, *pr;
+
+       pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+                pci_domain_nr(bus), bus->number);
+
+       for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+               if ((res = bus->resource[i]) == NULL || !res->flags
+                   || res->start > res->end || res->parent)
+                       continue;
+               if (bus->parent == NULL)
+                       pr = (res->flags & IORESOURCE_IO) ?
+                               &ioport_resource : &iomem_resource;
+               else {
+                       /* Don't bother with non-root busses when
+                        * re-assigning all resources. We clear the
+                        * resource flags as if they were colliding
+                        * and as such ensure proper re-allocation
+                        * later.
+                        */
+                       if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)
+                               goto clear_resource;
+                       pr = pci_find_parent_resource(bus->self, res);
+                       if (pr == res) {
+                               /* this happens when the generic PCI
+                                * code (wrongly) decides that this
+                                * bridge is transparent  -- paulus
+                                */
+                               continue;
+                       }
+               }
+
+               pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+                        "[0x%x], parent %p (%s)\n",
+                        bus->self ? pci_name(bus->self) : "PHB",
+                        bus->number, i,
+                        (unsigned long long)res->start,
+                        (unsigned long long)res->end,
+                        (unsigned int)res->flags,
+                        pr, (pr && pr->name) ? pr->name : "nil");
+
+               if (pr && !(pr->flags & IORESOURCE_UNSET)) {
+                       if (request_resource(pr, res) == 0)
+                               continue;
+                       /*
+                        * Must be a conflict with an existing entry.
+                        * Move that entry (or entries) under the
+                        * bridge resource and try again.
+                        */
+                       if (reparent_resources(pr, res) == 0)
+                               continue;
+               }
+               printk(KERN_WARNING "PCI: Cannot allocate resource region "
+                      "%d of PCI bridge %d, will remap\n", i, bus->number);
+clear_resource:
+               res->flags = 0;
+       }
+
+       list_for_each_entry(b, &bus->children, node)
+               pcibios_allocate_bus_resources(b);
+}
+
+static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
+{
+       struct resource *pr, *r = &dev->resource[idx];
+
+       pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+                pci_name(dev), idx,
+                (unsigned long long)r->start,
+                (unsigned long long)r->end,
+                (unsigned int)r->flags);
+
+       pr = pci_find_parent_resource(dev, r);
+       if (!pr || (pr->flags & IORESOURCE_UNSET) ||
+           request_resource(pr, r) < 0) {
+               printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
+                      " of device %s, will remap\n", idx, pci_name(dev));
+               if (pr)
+                       pr_debug("PCI:  parent is %p: %016llx-%016llx [%x]\n",
+                                pr,
+                                (unsigned long long)pr->start,
+                                (unsigned long long)pr->end,
+                                (unsigned int)pr->flags);
+               /* We'll assign a new address later */
+               r->flags |= IORESOURCE_UNSET;
+               r->end -= r->start;
+               r->start = 0;
+       }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+       struct pci_dev *dev = NULL;
+       int idx, disabled;
+       u16 command;
+       struct resource *r;
+
+       for_each_pci_dev(dev) {
+               pci_read_config_word(dev, PCI_COMMAND, &command);
+               for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
+                       r = &dev->resource[idx];
+                       if (r->parent)          /* Already allocated */
+                               continue;
+                       if (!r->flags || (r->flags & IORESOURCE_UNSET))
+                               continue;       /* Not assigned at all */
+                       /* We only allocate ROMs on pass 1 just in case they
+                        * have been screwed up by firmware
+                        */
+                       if (idx == PCI_ROM_RESOURCE )
+                               disabled = 1;
+                       if (r->flags & IORESOURCE_IO)
+                               disabled = !(command & PCI_COMMAND_IO);
+                       else
+                               disabled = !(command & PCI_COMMAND_MEMORY);
+                       if (pass == disabled)
+                               alloc_resource(dev, idx);
+               }
+               if (pass)
+                       continue;
+               r = &dev->resource[PCI_ROM_RESOURCE];
+               if (r->flags) {
+                       /* Turn the ROM off, leave the resource region,
+                        * but keep it unregistered.
+                        */
+                       u32 reg;
+                       pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+                       if (reg & PCI_ROM_ADDRESS_ENABLE) {
+                               pr_debug("PCI: Switching off ROM of %s\n",
+                                        pci_name(dev));
+                               r->flags &= ~IORESOURCE_ROM_ENABLE;
+                               pci_write_config_dword(dev, dev->rom_base_reg,
+                                                      reg & ~PCI_ROM_ADDRESS_ENABLE);
+                       }
+               }
+       }
+}
+
+static void __init pcibios_reserve_legacy_regions(struct pci_bus *bus)
+{
+       struct pci_controller *hose = pci_bus_to_host(bus);
+       resource_size_t offset;
+       struct resource *res, *pres;
+       int i;
+
+       pr_debug("Reserving legacy ranges for domain %04x\n", pci_domain_nr(bus));
+
+       /* Check for IO */
+       if (!(hose->io_resource.flags & IORESOURCE_IO))
+               goto no_io;
+       offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+       res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+       BUG_ON(res == NULL);
+       res->name = "Legacy IO";
+       res->flags = IORESOURCE_IO;
+       res->start = offset;
+       res->end = (offset + 0xfff) & 0xfffffffful;
+       pr_debug("Candidate legacy IO: %pR\n", res);
+       if (request_resource(&hose->io_resource, res)) {
+               printk(KERN_DEBUG
+                      "PCI %04x:%02x Cannot reserve Legacy IO %pR\n",
+                      pci_domain_nr(bus), bus->number, res);
+               kfree(res);
+       }
+
+ no_io:
+       /* Check for memory */
+       offset = hose->pci_mem_offset;
+       pr_debug("hose mem offset: %016llx\n", (unsigned long long)offset);
+       for (i = 0; i < 3; i++) {
+               pres = &hose->mem_resources[i];
+               if (!(pres->flags & IORESOURCE_MEM))
+                       continue;
+               pr_debug("hose mem res: %pR\n", pres);
+               if ((pres->start - offset) <= 0xa0000 &&
+                   (pres->end - offset) >= 0xbffff)
+                       break;
+       }
+       if (i >= 3)
+               return;
+       res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+       BUG_ON(res == NULL);
+       res->name = "Legacy VGA memory";
+       res->flags = IORESOURCE_MEM;
+       res->start = 0xa0000 + offset;
+       res->end = 0xbffff + offset;
+       pr_debug("Candidate VGA memory: %pR\n", res);
+       if (request_resource(pres, res)) {
+               printk(KERN_DEBUG
+                      "PCI %04x:%02x Cannot reserve VGA memory %pR\n",
+                      pci_domain_nr(bus), bus->number, res);
+               kfree(res);
+       }
+}
+
+void __init pcibios_resource_survey(void)
+{
+       struct pci_bus *b;
+
+       /* Allocate and assign resources. If we re-assign everything, then
+        * we skip the allocate phase
+        */
+       list_for_each_entry(b, &pci_root_buses, node)
+               pcibios_allocate_bus_resources(b);
+
+       if (!(ppc_pci_flags & PPC_PCI_REASSIGN_ALL_RSRC)) {
+               pcibios_allocate_resources(0);
+               pcibios_allocate_resources(1);
+       }
+
+       /* Before we start assigning unassigned resource, we try to reserve
+        * the low IO area and the VGA memory area if they intersect the
+        * bus available resources to avoid allocating things on top of them
+        */
+       if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
+               list_for_each_entry(b, &pci_root_buses, node)
+                       pcibios_reserve_legacy_regions(b);
+       }
+
+       /* Now, if the platform didn't decide to blindly trust the firmware,
+        * we proceed to assigning things that were left unassigned
+        */
+       if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
+               pr_debug("PCI: Assigning unassigned resources...\n");
+               pci_assign_unassigned_resources();
+       }
+
+       /* Call machine dependent fixup */
+       if (ppc_md.pcibios_fixup)
+               ppc_md.pcibios_fixup();
+}
+
+#ifdef CONFIG_HOTPLUG
+
+/* This is used by the PCI hotplug driver to allocate resource
+ * of newly plugged busses. We can try to consolidate with the
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
+ */
+void pcibios_claim_one_bus(struct pci_bus *bus)
+{
+       struct pci_dev *dev;
+       struct pci_bus *child_bus;
+
+       list_for_each_entry(dev, &bus->devices, bus_list) {
+               int i;
+
+               for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+                       struct resource *r = &dev->resource[i];
+
+                       if (r->parent || !r->start || !r->flags)
+                               continue;
+
+                       pr_debug("PCI: Claiming %s: "
+                                "Resource %d: %016llx..%016llx [%x]\n",
+                                pci_name(dev), i,
+                                (unsigned long long)r->start,
+                                (unsigned long long)r->end,
+                                (unsigned int)r->flags);
+
+                       pci_claim_resource(dev, i);
+               }
+       }
+
+       list_for_each_entry(child_bus, &bus->children, node)
+               pcibios_claim_one_bus(child_bus);
+}
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+       pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+                pci_domain_nr(bus), bus->number);
+
+       /* Allocate bus and devices resources */
+       pcibios_allocate_bus_resources(bus);
+       pcibios_claim_one_bus(bus);
+
+       /* Add new devices to global lists.  Register in proc, sysfs. */
+       pci_bus_add_devices(bus);
+
+       /* Fixup EEH */
+       eeh_add_device_tree_late(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
+#endif /* CONFIG_HOTPLUG */
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+       if (ppc_md.pcibios_enable_device_hook)
+               if (ppc_md.pcibios_enable_device_hook(dev))
+                       return -EINVAL;
+
+       return pci_enable_resources(dev, mask);
+}
+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+       struct pci_bus *bus = hose->bus;
+       struct resource *res;
+       int i;
+
+       /* Hookup PHB IO resource */
+       bus->resource[0] = res = &hose->io_resource;
+
+       if (!res->flags) {
+               printk(KERN_WARNING "PCI: I/O resource not set for host"
+                      " bridge %s (domain %d)\n",
+                      hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+               /* Workaround for lack of IO resource only on 32-bit */
+               res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+               res->end = res->start + IO_SPACE_LIMIT;
+               res->flags = IORESOURCE_IO;
+#endif /* CONFIG_PPC32 */
+       }
+
+       pr_debug("PCI: PHB IO resource    = %016llx-%016llx [%lx]\n",
+                (unsigned long long)res->start,
+                (unsigned long long)res->end,
+                (unsigned long)res->flags);
+
+       /* Hookup PHB Memory resources */
+       for (i = 0; i < 3; ++i) {
+               res = &hose->mem_resources[i];
+               if (!res->flags) {
+                       if (i > 0)
+                               continue;
+                       printk(KERN_ERR "PCI: Memory resource 0 not set for "
+                              "host bridge %s (domain %d)\n",
+                              hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+                       /* Workaround for lack of MEM resource only on 32-bit */
+                       res->start = hose->pci_mem_offset;
+                       res->end = (resource_size_t)-1LL;
+                       res->flags = IORESOURCE_MEM;
+#endif /* CONFIG_PPC32 */
+               }
+               bus->resource[i+1] = res;
+
+               pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
+                        (unsigned long long)res->start,
+                        (unsigned long long)res->end,
+                        (unsigned long)res->flags);
+       }
+
+       pr_debug("PCI: PHB MEM offset     = %016llx\n",
+                (unsigned long long)hose->pci_mem_offset);
+       pr_debug("PCI: PHB IO  offset     = %08lx\n",
+                (unsigned long)hose->io_base_virt - _IO_BASE);
+
+}
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)                                    \
+static int                                                             \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)   \
+{                                                                      \
+       return PCIBIOS_DEVICE_NOT_FOUND;                                \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                int len, u32 *val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+                 int len, u32 val)
+{
+       return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+       .read = null_read_config,
+       .write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+       static struct pci_bus bus;
+
+       if (hose == 0) {
+               printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+       }
+       bus.number = busnr;
+       bus.sysdata = hose;
+       bus.ops = hose? hose->ops: &null_pci_ops;
+       return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)                                   \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,   \
+                              int devfn, int offset, type value)       \
+{                                                                      \
+       return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),    \
+                                           devfn, offset, value);      \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+                         int cap)
+{
+       return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer.  ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure.  As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+       struct pci_bus *bus;
+       struct device_node *node = hose->dn;
+       int mode;
+
+       pr_debug("PCI: Scanning PHB %s\n",
+                node ? node->full_name : "<NO NAME>");
+
+       /* Create an empty bus for the toplevel */
+       bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+                            sysdata);
+       if (bus == NULL) {
+               pr_err("Failed to create bus for PCI domain %04x\n",
+                       hose->global_number);
+               return;
+       }
+       bus->secondary = hose->first_busno;
+       hose->bus = bus;
+
+       /* Get some IO space for the new PHB */
+       pcibios_setup_phb_io_space(hose);
+
+       /* Wire up PHB bus resources */
+       pcibios_setup_phb_resources(hose);
+
+       /* Get probe mode and perform scan */
+       mode = PCI_PROBE_NORMAL;
+       if (node && ppc_md.pci_probe_mode)
+               mode = ppc_md.pci_probe_mode(bus);
+       pr_debug("    probe mode: %d\n", mode);
+       if (mode == PCI_PROBE_DEVTREE) {
+               bus->subordinate = hose->last_busno;
+               of_scan_bus(node, bus);
+       }
+
+       if (mode == PCI_PROBE_NORMAL)
+               hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}