source "lib/Kconfig.debug"
+config PPC_DISABLE_WERROR
+ bool "Don't build arch/powerpc code with -Werror"
+ default n
+ help
+ This option tells the compiler NOT to build the code under
+ arch/powerpc with the -Werror flag (which means warnings
+ are treated as errors).
+
+ Only enable this if you are hitting a build failure in the
+ arch/powerpc code caused by a warning, and you don't feel
+ inclined to fix it.
+
+config PPC_WERROR
+ bool
+ depends on !PPC_DISABLE_WERROR
+ default y
+
+config PRINT_STACK_DEPTH
+ int "Stack depth to print" if DEBUG_KERNEL
+ default 64
+ help
+ This option allows you to set the stack depth that the kernel
+ prints in stack traces. This can be useful if your display is
+ too small and stack traces cause important information to
+ scroll off the screen.
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
This option will slow down process creation somewhat.
-config DEBUG_PAGEALLOC
- bool "Debug page memory allocations"
- depends on DEBUG_KERNEL && !HIBERNATION
- help
- Unmap pages from the kernel linear mapping after free_pages().
- This results in a large slowdown, but helps to find certain types
- of memory corruptions.
+config DEBUG_PER_CPU_MAPS
+ bool "Debug access to per_cpu maps"
+ depends on DEBUG_KERNEL
+ depends on SMP
+ default n
+ ---help---
+ Say Y to verify that the per_cpu map being accessed has
+ been setup. Adds a fair amount of code to kernel memory
+ and decreases performance.
+ Say N if unsure.
config HCALL_STATS
bool "Hypervisor call instrumentation"
- depends on PPC_PSERIES && DEBUG_FS
+ depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
help
Adds code to keep track of the number of hypervisor calls made and
the amount of time spent in hypervisor calls. Wall time spent in
This option will add a small amount of overhead to all hypervisor
calls.
-config DEBUGGER
- bool "Enable debugger hooks"
- depends on DEBUG_KERNEL
- help
- Include in-kernel hooks for kernel debuggers. Unless you are
- intending to debug the kernel, say N here.
-
-config KGDB
- bool "Include kgdb kernel debugger"
- depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
- select DEBUG_INFO
+config PPC_EMULATED_STATS
+ bool "Emulated instructions tracking"
+ depends on DEBUG_FS
help
- Include in-kernel hooks for kgdb, the Linux kernel source level
- debugger. See <http://kgdb.sourceforge.net/> for more information.
- Unless you are intending to debug the kernel, say N here.
-
-choice
- prompt "Serial Port"
- depends on KGDB
- default KGDB_TTYS1
-
-config KGDB_TTYS0
- bool "ttyS0"
-
-config KGDB_TTYS1
- bool "ttyS1"
-
-config KGDB_TTYS2
- bool "ttyS2"
-
-config KGDB_TTYS3
- bool "ttyS3"
+ Adds code to keep track of the number of instructions that are
+ emulated by the in-kernel emulator. Counters for the various classes
+ of emulated instructions are available under
+ powerpc/emulated_instructions/ in the root of the debugfs file
+ system. Optionally (controlled by
+ powerpc/emulated_instructions/do_warn in debugfs), rate-limited
+ warnings can be printed to the console when instructions are
+ emulated.
+
+config CODE_PATCHING_SELFTEST
+ bool "Run self-tests of the code-patching code."
+ depends on DEBUG_KERNEL
+ default n
-endchoice
+config FTR_FIXUP_SELFTEST
+ bool "Run self-tests of the feature-fixup code."
+ depends on DEBUG_KERNEL
+ default n
-config KGDB_CONSOLE
- bool "Enable serial console thru kgdb port"
- depends on KGDB && 8xx || CPM2
- help
- If you enable this, all serial console messages will be sent
- over the gdb stub.
- If unsure, say N.
+config MSI_BITMAP_SELFTEST
+ bool "Run self-tests of the MSI bitmap code."
+ depends on DEBUG_KERNEL
+ default n
config XMON
bool "Include xmon kernel debugger"
- depends on DEBUGGER
+ depends on DEBUG_KERNEL
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
to say Y here, unless you're building for a memory-constrained
system.
+config DEBUGGER
+ bool
+ depends on KGDB || XMON
+ default y
+
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
- depends on PPC64
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
config VIRQ_DEBUG
bool "Expose hardware/virtual IRQ mapping via debugfs"
- depends on DEBUG_FS && PPC_MERGE
+ depends on DEBUG_FS
help
This option will show the mapping relationship between hardware irq
numbers and virtual irq numbers. The mapping is exposed via debugfs
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
- depends on PPC_OF && PPC_MULTIPLATFORM
+ depends on PPC_OF && PPC_BOOK3S
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
+ # PPC_EARLY_DEBUG on 440 leaves AS=1 mappings above the TLB high water
+ # mark, which doesn't work with current 440 KVM.
+ depends on !KVM
+ help
+ Say Y to enable some early debugging facilities that may be available
+ for your processor/board combination. Those facilities are hacks
+ intended to debug problems early during boot, this should not be
+ enabled in a production kernel.
+ Note that enabling this will also cause the kernel default log level
+ to be pushed to max automatically very early during boot
choice
prompt "Early debugging console"
config PPC_EARLY_DEBUG_44x
bool "Early serial debugging for IBM/AMCC 44x CPUs"
depends on 44x
- select PPC_UDBG_16550
help
Select this to enable early debugging for IBM 44x chips via the
- inbuilt serial port.
+ inbuilt serial port. If you enable this, ensure you set
+ PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
+
+config PPC_EARLY_DEBUG_40x
+ bool "Early serial debugging for IBM/AMCC 40x CPUs"
+ depends on 40x
+ help
+ Select this to enable early debugging for IBM 40x chips via the
+ inbuilt serial port. This works on chips with a 16550 compatible
+ UART. Xilinx chips with uartlite cannot use this option.
config PPC_EARLY_DEBUG_CPM
bool "Early serial debugging for Freescale CPM-based serial ports"
using a CPM-based serial port. This assumes that the bootwrapper
has run, and set up the CPM in a particular way.
+config PPC_EARLY_DEBUG_USBGECKO
+ bool "Early debugging through the USB Gecko adapter"
+ depends on GAMECUBE_COMMON
+ select USBGECKO_UDBG
+ help
+ Select this to enable early debugging for Nintendo GameCube/Wii
+ consoles via an external USB Gecko adapter.
+
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address"
depends on PPC_EARLY_DEBUG_44x
default "0x40000200"
+ help
+ You probably want 0x40000200 for ebony boards and
+ 0x40000300 for taishan
config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address"
depends on PPC_EARLY_DEBUG_44x
default "0x1"
+config PPC_EARLY_DEBUG_40x_PHYSADDR
+ hex "Early debug UART physical address"
+ depends on PPC_EARLY_DEBUG_40x
+ default "0xef600300"
+
config PPC_EARLY_DEBUG_CPM_ADDR
hex "CPM UART early debug transmit descriptor address"
depends on PPC_EARLY_DEBUG_CPM
default "0xfa202008" if PPC_EP88XC
- default "0xf0000008" if CPM2
+ default "0xf0001ff8" if CPM2
default "0xff002008" if CPM1
help
This specifies the address of the transmit descriptor