/* Include all Core registers and bit definitions */
#include <asm/def_LPBlackfin.h>
-
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
#include "defBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
-
-/* Timer Registers */
-
-#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
-#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
-#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
-#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
-#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
-#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
-#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
-#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
-#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
-#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
-#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
-#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
-
-/* Timer Group of 3 Registers */
-
-#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
-#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
-#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
-
-/* SPORT0 Registers */
-
-#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
-#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
-#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
-#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
-#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
-#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
-#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
-#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
-#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
-#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
-#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
-#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
-#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
-#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
-#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
-#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
-#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
-#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
-#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
-#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
-#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
-#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
-
-/* EPPI0 Registers */
-
-#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
-#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
-#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
-#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
-#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
-#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
-#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
-#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
-#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
-#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
-#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
-#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
-#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
-#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
-
-/* UART2 Registers */
-
-#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
-#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
-#define UART2_GCTL 0xffc02108 /* Global Control Register */
-#define UART2_LCR 0xffc0210c /* Line Control Register */
-#define UART2_MCR 0xffc02110 /* Modem Control Register */
-#define UART2_LSR 0xffc02114 /* Line Status Register */
-#define UART2_MSR 0xffc02118 /* Modem Status Register */
-#define UART2_SCR 0xffc0211c /* Scratch Register */
-#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
-#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
-#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
-
-/* Two Wire Interface Registers (TWI1) */
-
-#define TWI1_REGBASE 0xffc02200
-#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
-#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
-#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
-#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
-#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
-#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
-#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
-#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
-#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
-#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
-#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
-#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
-#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
-#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
-#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
-#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
-
-/* SPI2 Registers */
-
-#define SPI2_REGBASE 0xffc02400
-#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
-#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
-#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
-#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
-#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
-#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
-#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
+/* The BF549 is like the BF544, but has MXVR */
+#include "defBF547.h"
/* MXVR Registers */
#define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */
#define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */
-/* CAN Controller 1 Config 1 Registers */
-
-#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */
-#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */
-#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */
-#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */
-#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */
-#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */
-#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */
-#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */
-#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
-#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
-#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
-#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
-#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
-
-/* CAN Controller 1 Config 2 Registers */
-
-#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */
-#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */
-#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */
-#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */
-#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */
-#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */
-#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */
-#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */
-#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
-#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
-#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
-#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
-#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
-
-/* CAN Controller 1 Clock/Interrupt/Counter Registers */
-
-#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */
-#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */
-#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */
-#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */
-#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */
-#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */
-#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */
-#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */
-#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */
-#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */
-#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */
-#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */
-#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */
-#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */
-#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */
-#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
-#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
-#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
-#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
-#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
-#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
-#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
-#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
-#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
-#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
-#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
-#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
-#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
-#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
-#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
-#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
-#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
-#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
-#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
-#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
-#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
-#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
-#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
-#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
-#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
-#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
-#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
-#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
-#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
-#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
-#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
-#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
-#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
-#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
-#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
-#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
-#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
-#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
-#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
-#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
-#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
-#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
-#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
-#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
-#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
-#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
-#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
-#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
-#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
-#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
-#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
-#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
-#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
-#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
-#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
-#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
-#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
-#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
-#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
-#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
-#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
-#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
-#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */
-#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */
-#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */
-#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */
-#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */
-#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */
-#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */
-#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */
-#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */
-#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */
-#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */
-#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */
-#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */
-#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */
-#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */
-#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */
-#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */
-#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */
-#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */
-#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */
-#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */
-#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */
-#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */
-#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */
-#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */
-#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */
-#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */
-#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */
-#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */
-#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */
-#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */
-#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */
-#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */
-#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */
-#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */
-#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */
-#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */
-#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */
-#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */
-#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */
-#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */
-#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */
-#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */
-#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */
-#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */
-#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */
-#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */
-#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */
-#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */
-#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */
-#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */
-#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */
-#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */
-#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */
-#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */
-#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */
-#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */
-#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */
-#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */
-#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */
-#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */
-#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */
-#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */
-#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */
-#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */
-#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */
-#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */
-#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */
-#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */
-#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */
-#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */
-#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */
-#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */
-#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */
-#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */
-#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */
-#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */
-#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */
-#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */
-#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */
-#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */
-#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */
-#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */
-#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */
-#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */
-#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */
-#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */
-#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */
-#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */
-#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */
-#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */
-#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */
-#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */
-#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */
-#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */
-#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */
-#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */
-#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */
-#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */
-#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */
-#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */
-#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */
-#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */
-#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */
-#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */
-#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */
-#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */
-#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */
-#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */
-#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */
-#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */
-#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */
-#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */
-#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */
-#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */
-#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */
-#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */
-#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */
-#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */
-#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */
-#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */
-#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */
-#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */
-#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */
-#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */
-#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */
-#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */
-#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */
-#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */
-#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */
-#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */
-#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */
-#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */
-#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */
-#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */
-#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */
-#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */
-#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */
-#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */
-#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */
-#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */
-#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */
-#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */
-#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */
-#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */
-#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */
-#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */
-#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */
-#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */
-#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */
-#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */
-#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */
-#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */
-#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */
-#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */
-#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */
-#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */
-#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */
-#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */
-#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */
-#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */
-#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */
-#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */
-#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */
-#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */
-#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */
-#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */
-#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */
-#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */
-#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */
-#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */
-#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */
-#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */
-#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */
-#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */
-#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */
-#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */
-#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */
-#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */
-#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */
-#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */
-#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */
-#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */
-#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */
-#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */
-#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */
-#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */
-#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */
-#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */
-#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */
-#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */
-#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */
-#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */
-#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */
-#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */
-#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */
-#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */
-#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */
-#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */
-#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */
-#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */
-#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */
-#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */
-#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */
-#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */
-#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */
-#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */
-#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */
-#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */
-#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */
-#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */
-#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */
-#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */
-#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */
-#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */
-#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */
-#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */
-#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */
-#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */
-#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */
-#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */
-#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */
-#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */
-#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */
-#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */
-#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */
-#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */
-#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */
-#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */
-#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */
-#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */
-#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */
-#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */
-#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */
-#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */
-#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */
-#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */
-#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */
-#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */
-#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */
-#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */
-#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */
-#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */
-#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */
-#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */
-#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */
-#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */
-#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */
-#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */
-#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */
-#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */
-#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */
-#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */
-#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */
-#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */
-
-/* ATAPI Registers */
-
-#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
-#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
-#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
-#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
-#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
-#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
-#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
-#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
-#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
-#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
-#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
-#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
-#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
-#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
-#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
-#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
-#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
-#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
-#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
-#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
-#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
-#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
-#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
-#define SDH_COMMAND 0xffc0390c /* SDH Command */
-#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
-#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
-#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
-#define SDH_STATUS 0xffc03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
-#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
-#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
-#define SDH_CFG 0xffc039c8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
-#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
-
-/* HOST Port Registers */
-
-#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
-#define HOST_STATUS 0xffc03a04 /* HOST Status Register */
-#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
-
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03c00 /* Function address register */
-#define USB_POWER 0xffc03c04 /* Power management register */
-#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03c20 /* USB frame number */
-#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
-#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
-#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
-#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
-#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
-#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
-#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
-#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
-
-/* Pixel Compositor (PIXC) Registers */
-
-#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
-#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
-#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
-#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
-#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
-#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
-#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
-#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
-#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
-#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
-#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
-#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
-#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
-#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
-#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
-#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
-#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
-#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
-#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
-
-/* Handshake MDMA 0 Registers */
-
-#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
-#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
-#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
-#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
-#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
-#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
-
-/* Handshake MDMA 1 Registers */
-
-#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
-#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
-#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
-#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
-#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
-#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
-
-
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for PIXC_CTL */
-
-#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define IMG_FORM 0x8 /* Image Data Format */
-#define OVR_FORM 0x10 /* Overlay Data Format */
-#define OUT_FORM 0x20 /* Output Data Format */
-#define UDS_MOD 0x40 /* Resampling Mode */
-#define TC_EN 0x80 /* Transparent Color Enable */
-#define IMG_STAT 0x300 /* Image FIFO Status */
-#define OVR_STAT 0xc00 /* Overlay FIFO Status */
-#define WM_LVL 0x3000 /* FIFO Watermark Level */
-
-/* Bit masks for PIXC_AHSTART */
-
-#define A_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_AHEND */
-
-#define A_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_AVSTART */
-
-#define A_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_AVEND */
-
-#define A_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_ATRANSP */
-
-#define A_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_BHSTART */
-
-#define B_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_BHEND */
-
-#define B_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_BVSTART */
-
-#define B_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_BVEND */
-
-#define B_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_BTRANSP */
-
-#define B_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_INTRSTAT */
-
-#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-
-/* Bit masks for PIXC_RYCON */
-
-#define A11 0x3ff /* A11 in the Coefficient Matrix */
-#define A12 0xffc00 /* A12 in the Coefficient Matrix */
-#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
-#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_GUCON */
-
-#define A21 0x3ff /* A21 in the Coefficient Matrix */
-#define A22 0xffc00 /* A22 in the Coefficient Matrix */
-#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
-#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_BVCON */
-
-#define A31 0x3ff /* A31 in the Coefficient Matrix */
-#define A32 0xffc00 /* A32 in the Coefficient Matrix */
-#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
-#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_CCBIAS */
-
-#define A14 0x3ff /* A14 in the Bias Vector */
-#define A24 0xffc00 /* A24 in the Bias Vector */
-#define A34 0x3ff00000 /* A34 in the Bias Vector */
-
-/* Bit masks for PIXC_TC */
-
-#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
-#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
-#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
-
-/* Bit masks for HOST_CONTROL */
-
-#define HOST_EN 0x1 /* Host Enable */
-#define HOST_END 0x2 /* Host Endianess */
-#define DATA_SIZE 0x4 /* Data Size */
-#define HOST_RST 0x8 /* Host Reset */
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define EHW 0x100 /* Enable Host Write */
-#define EHR 0x200 /* Enable Host Read */
-#define BDR 0x400 /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define DMA_READY 0x1 /* DMA Ready */
-#define FIFOFULL 0x2 /* FIFO Full */
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define DMA_COMPLETE 0x8 /* DMA Complete */
-#define HSHK 0x10 /* Host Handshake */
-#define TIMEOUT 0x20 /* Host Timeout */
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define DMA_DIR 0x100 /* DMA Direction */
-#define BTE 0x200 /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
-
/* Bit masks for MXVR_CONFIG */
#define MXVREN 0x1 /* MXVR Enable */
#define SCNT 0xffff /* System Clock Count */
-/* Bit masks for KPAD_CTL */
-
-#define KPAD_EN 0x1 /* Keypad Enable */
-#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
-#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
-#define KPAD_COLEN 0xe000 /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define DBON_SCALE 0xff /* Debounce Scale Value */
-#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define KPAD_ROW 0xff /* Rows Pressed */
-#define KPAD_COL 0xff00 /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
-#define KPAD_PRESSED 0x8 /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define XFER_DIR 0x8 /* Transfer Direction */
-#define IORDY_EN 0x10 /* IORDY Enable */
-#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define SOFT_RST 0x40 /* Soft Reset */
-#define DEV_RST 0x80 /* Device Reset */
-#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define DEV_ADDR 0x1f /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define ATAPI_ADDR 0x70 /* ATAPI address line status */
-#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define PIO_CSTATE 0xf /* PIO mode state machine current state */
-#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
-#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
-#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define T2_REG 0xff /* End of cycle time for register access transfers */
-#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
-#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
-#define T4_REG 0xf000 /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
-#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define TKW 0xff /* Selects DIOW negated pulsewidth */
-#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define TH 0xff /* Selects DIOW data hold */
-#define TEOC 0xff00 /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define TACK 0xff /* Selects setup and hold times for TACK */
-#define TENV 0xff00 /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define TDVS 0xff /* Selects data valid setup time */
-#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define TMLI 0xff00 /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define TZAH 0xff /* Selects minimum delay required for output */
-#define READY_PAUSE 0xff00 /* Selects ready to pause */
-
-/* Bit masks for TIMER_ENABLE1 */
-
-#define TIMEN8 0x1 /* Timer 8 Enable */
-#define TIMEN9 0x2 /* Timer 9 Enable */
-#define TIMEN10 0x4 /* Timer 10 Enable */
-
-/* Bit masks for TIMER_DISABLE1 */
-
-#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define TIMDIS10 0x4 /* Timer 10 Disable */
-
-/* Bit masks for TIMER_STATUS1 */
-
-#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-
-/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define RESET 0x8 /* Reset indicator */
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define SOFT_CONN 0x40 /* Soft connect */
-#define ISO_UPDATE 0x80 /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define RESUME_B 0x2 /* Resume indicator */
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define SOF_B 0x8 /* Start of frame */
-#define CONN_B 0x10 /* Connection indicator */
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define LSDEV 0x20 /* Low-speed indicator */
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define DATAEND 0x8 /* Data end indicator */
-#define SETUPEND 0x10 /* Setup end */
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_TH 0x4 /* error condition host mode */
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define MODE 0x4 /* DMA Bus error */
-#define INT_ENA 0x8 /* Interrupt enable */
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for HMDMAx_CONTROL */
-
-#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define UTE 0x8 /* Urgency Threshold Enable */
-#define OIE 0x10 /* Overflow Interrupt Enable */
-#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define DRQ 0x300 /* Handshake MDMA Request Type */
-#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define PS 0x2000 /* Pin Status */
-#define OI 0x4000 /* Overflow Interrupt Generated */
-#define BDI 0x8000 /* Block Done Interrupt Generated */
-
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* ******************************************* */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff