Blackfin: mass clean up of copyright/licensing info

[safe/jmp/linux-2.6] / arch / blackfin / mach-bf537 / boards / pnav10.c

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 89de94f..29e38d5 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf537/boards/stamp.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -92,6 +70,14 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+       .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+       .leda = RPC_LED_100_10,
+       .ledb = RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
        {
                .name = "smc91x-regs",
@@ -110,6 +96,9 @@ static struct platform_device smc91x_device = {
        .id = 0,
        .num_resources = ARRAY_SIZE(smc91x_resources),
        .resource = smc91x_resources,
+       .dev    = {
+               .platform_data  = &smc91x_info,
+       },
 };
 #endif
 
@@ -198,8 +187,13 @@ static struct platform_device isp1362_hcd_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+       .name = "bfin_mii_bus",
+};
+
 static struct platform_device bfin_mac_device = {
        .name = "bfin_mac",
+       .dev.platform_data = &bfin_mii_bus,
 };
 #endif
 
@@ -260,8 +254,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
        .enable_dma = 1,         /* use dma transfer with this chip*/
@@ -277,16 +271,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
        .enable_dma = 0,
-       .bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-       .enable_dma = 1,
        .bits_per_word = 8,
 };
 #endif
@@ -328,8 +315,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-       || defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+       || defined(CONFIG_BFIN_SPI_ADC_MODULE)
        {
                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -343,39 +330,20 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
        || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
        {
-               .modalias = "ad1836-spi",
+               .modalias = "ad1836",
                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                .controller_data = &ad1836_spi_chip_info,
        },
 #endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-       {
-               .modalias = "ad9960-spi",
-               .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 1,
-               .controller_data = &ad9960_spi_chip_info,
-       },
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-       {
-               .modalias = "spi_mmc_dummy",
-               .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 7,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
-               .mode = SPI_MODE_3,
-       },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
        {
-               .modalias = "spi_mmc",
+               .modalias = "mmc_spi",
                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
-               .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-               .platform_data = NULL,
-               .controller_data = &spi_mmc_chip_info,
+               .chip_select = 5,
+               .controller_data = &mmc_spi_chip_info,
                .mode = SPI_MODE_3,
        },
 #endif
@@ -403,8 +371,13 @@ static struct resource bfin_spi0_resource[] = {
        [1] = {
                .start = CH_SPI,
                .end   = CH_SPI,
+               .flags = IORESOURCE_DMA,
+       },
+       [2] = {
+               .start = IRQ_SPI,
+               .end   = IRQ_SPI,
                .flags = IORESOURCE_IRQ,
-       }
+       },
 };
 
 /* SPI controller data */
@@ -529,6 +502,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+       &bfin_mii_bus,
        &bfin_mac_device,
 #endif
 
@@ -558,7 +532,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 };
 
-static int __init stamp_init(void)
+static int __init pnav_init(void)
 {
        printk(KERN_INFO "%s(): registering device resources\n", __func__);
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -569,7 +543,7 @@ static int __init stamp_init(void)
        return 0;
 }
 
-arch_initcall(stamp_init);
+arch_initcall(pnav_init);
 
 void bfin_get_ether_addr(char *addr)
 {