Blackfin: convert adv7393 resources to new i2c framework

[safe/jmp/linux-2.6] / arch / blackfin / mach-bf533 / boards / stamp.c

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index f3dc283..ff1fd93 100644 (file)
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -1,31 +1,9 @@
 /*
- * File:         arch/blackfin/mach-bf533/stamp.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2005 National ICT Australia (NICTA)
+ *                      Aidan Williams <aidan@nicta.com.au>
  *
- * Created:      2005
- * Description:  Board Info File for the BF533-STAMP
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #include <linux/device.h>
@@ -95,12 +73,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-       .name = "bfin-adv7393",
-};
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 static struct resource net2272_bfin_resources[] = {
        {
@@ -219,15 +191,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-       .ctl_reg        = 0x4, /* send zero */
-       .enable_dma     = 0,
-       .bits_per_word  = 8,
-       .cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 static struct bfin5xx_spi_chip spidev_chip_info = {
        .enable_dma = 0,
@@ -290,7 +253,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
        {
-               .modalias = "ad1836-spi",
+               .modalias = "ad1836",
                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
                .bus_num = 0,
                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
@@ -298,25 +261,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        },
 #endif
 
-#if defined(CONFIG_PBX)
-       {
-               .modalias = "fxs-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J11_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "fxo-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J19_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
-
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
        {
                .modalias = "spidev",
@@ -515,6 +459,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                .irq = 39,
        },
 #endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+       {
+               I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+       },
+#endif
 };
 
 static const unsigned int cclk_vlev_datasheet[] =
@@ -556,10 +505,6 @@ static struct platform_device *stamp_devices[] __initdata = {
        &smc91x_device,
 #endif
 
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-       &bfin_fb_adv7393_device,
-#endif
-
 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
        &net2272_bfin_device,
 #endif