mainmenu "Blackfin Kernel Configuration"
config MMU
- bool
- default n
+ def_bool n
config FPU
- bool
- default n
+ def_bool n
config RWSEM_GENERIC_SPINLOCK
- bool
- default y
+ def_bool y
config RWSEM_XCHGADD_ALGORITHM
- bool
- default n
+ def_bool n
config BLACKFIN
- bool
- default y
+ def_bool y
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACER
select HAVE_IDE
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
select HAVE_OPROFILE
select ARCH_WANT_OPTIONAL_GPIOLIB
+config GENERIC_BUG
+ def_bool y
+ depends on BUG
+
config ZONE_DMA
- bool
- default y
+ def_bool y
config GENERIC_FIND_NEXT_BIT
- bool
- default y
+ def_bool y
config GENERIC_HWEIGHT
- bool
- default y
+ def_bool y
config GENERIC_HARDIRQS
- bool
- default y
+ def_bool y
config GENERIC_IRQ_PROBE
- bool
- default y
+ def_bool y
config GENERIC_GPIO
- bool
- default y
+ def_bool y
config FORCE_MAX_ZONEORDER
int
default "14"
config GENERIC_CALIBRATE_DELAY
- bool
- default y
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
source "init/Kconfig"
help
BF542 Processor Support.
+config BF542M
+ bool "BF542m"
+ help
+ BF542 Processor Support.
+
config BF544
bool "BF544"
help
BF544 Processor Support.
+config BF544M
+ bool "BF544m"
+ help
+ BF544 Processor Support.
+
config BF547
bool "BF547"
help
BF547 Processor Support.
+config BF547M
+ bool "BF547m"
+ help
+ BF547 Processor Support.
+
config BF548
bool "BF548"
help
BF548 Processor Support.
+config BF548M
+ bool "BF548m"
+ help
+ BF548 Processor Support.
+
config BF549
bool "BF549"
help
BF549 Processor Support.
+config BF549M
+ bool "BF549m"
+ help
+ BF549 Processor Support.
+
config BF561
bool "BF561"
help
config SMP
depends on BF561
+ select GENERIC_TIME
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU,
depends on SMP
default y
-config TICK_SOURCE_SYSTMR0
- bool
- select BFIN_GPTIMERS
- depends on SMP
- default y
-
config BF_REV_MIN
int
- default 0 if (BF51x || BF52x || BF54x)
+ default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
default 2 if (BF537 || BF536 || BF534)
- default 3 if (BF561 ||BF533 || BF532 || BF531)
+ default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
default 4 if (BF538 || BF539)
config BF_REV_MAX
int
- default 2 if (BF51x || BF52x || BF54x)
- default 3 if (BF537 || BF536 || BF534)
+ default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+ default 3 if (BF537 || BF536 || BF534 || BF54xM)
default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if (BF51x || BF52x || BF54x)
- default BF_REV_0_2 if (BF534 || BF536 || BF537)
- default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+ default BF_REV_0_0 if (BF51x || BF52x)
+ default BF_REV_0_2 if (BF534 || BF536 || BF537 || (BF54x && !BF54xM))
+ default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF51x || BF52x || BF54x)
+ depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_1
bool "0.1"
- depends on (BF52x || BF54x)
+ depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
- depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+ depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
config BF_REV_0_3
bool "0.3"
- depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+ depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
config BF_REV_0_4
bool "0.4"
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
+config BF54xM
+ bool
+ depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+ default y
+
config BF54x
bool
- depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+ depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
default y
config MEM_GENERIC_BOARD
config CLKIN_HZ
int "Frequency of the crystal on the board in Hz"
+ default "10000000" if BFIN532_IP0X
default "11059200" if BFIN533_STAMP
+ default "24576000" if PNAV10
+ default "25000000" # most people use this
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
default "30000000" if BFIN561_EZKIT
- default "24576000" if PNAV10
- default "10000000" if BFIN532_IP0X
help
The frequency of CLKIN crystal oscillator on the board in Hz.
Warning: This value should match the crystal on the board. Otherwise,
config GENERIC_TIME
bool "Generic time"
- depends on !SMP
default y
config GENERIC_CLOCKEVENTS
depends on GENERIC_TIME
default y
+choice
+ prompt "Kernel Tick Source"
+ depends on GENERIC_CLOCKEVENTS
+ default TICKSOURCE_CORETMR
+
+config TICKSOURCE_GPTMR0
+ bool "Gptimer0 (SCLK domain)"
+ select BFIN_GPTIMERS
+
+config TICKSOURCE_CORETMR
+ bool "Core timer (CCLK domain)"
+
+endchoice
+
config CYCLES_CLOCKSOURCE
- bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Use 'CYCLES' as a clocksource"
depends on GENERIC_CLOCKEVENTS
depends on !BFIN_SCRATCH_REG_CYCLES
- default n
+ depends on !SMP
help
If you say Y here, you will enable support for using the 'cycles'
registers as a clock source. Doing so means you will be unable to
still be able to read it (such as for performance monitoring), but
writing the registers will most likely crash the kernel.
+config GPTMR0_CLOCKSOURCE
+ bool "Use GPTimer0 as a clocksource (higher rating)"
+ depends on GENERIC_CLOCKEVENTS
+ depends on !TICKSOURCE_GPTMR0
+
source kernel/time/Kconfig
comment "Misc"
default n if BF54x
depends on !BF531
help
- If enabled, cacheline_anligned data is linked
+ If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency)
config SYSCALL_TAB_L1
config EXCEPTION_L1_SCRATCH
bool "Locate exception stack in L1 Scratch Memory"
default n
- depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+ depends on !APP_STACK_L1
help
Whenever an exception occurs, use the L1 Scratch memory for
stack storage. You cannot place the stacks of FLAT binaries
are unsure, say N.
To compile this driver as a module, choose M here: the module
- will be called gptimers.ko.
+ will be called gptimers.
choice
prompt "Uncached DMA region"
comment "Cache Support"
+
config BFIN_ICACHE
bool "Enable ICACHE"
+ default y
+config BFIN_ICACHE_LOCK
+ bool "Enable Instruction Cache Locking"
+ depends on BFIN_ICACHE
+ default n
+config BFIN_EXTMEM_ICACHEABLE
+ bool "Enable ICACHE for external memory"
+ depends on BFIN_ICACHE
+ default y
+config BFIN_L2_ICACHEABLE
+ bool "Enable ICACHE for L2 SRAM"
+ depends on BFIN_ICACHE
+ depends on BF54x || BF561
+ default n
+
config BFIN_DCACHE
bool "Enable DCACHE"
+ default y
config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
depends on BFIN_DCACHE && !BF531
default n
-config BFIN_ICACHE_LOCK
- bool "Enable Instruction Cache Locking"
-
-choice
- prompt "Policy"
+config BFIN_EXTMEM_DCACHEABLE
+ bool "Enable DCACHE for external memory"
depends on BFIN_DCACHE
- default BFIN_WB if !SMP
- default BFIN_WT if SMP
-config BFIN_WB
+ default y
+choice
+ prompt "External memory DCACHE policy"
+ depends on BFIN_EXTMEM_DCACHEABLE
+ default BFIN_EXTMEM_WRITEBACK if !SMP
+ default BFIN_EXTMEM_WRITETHROUGH if SMP
+config BFIN_EXTMEM_WRITEBACK
bool "Write back"
depends on !SMP
help
If you are unsure of the options and you want to be safe,
then go with Write Through.
-config BFIN_WT
+config BFIN_EXTMEM_WRITETHROUGH
bool "Write through"
help
Write Back Policy:
endchoice
-config BFIN_L2_CACHEABLE
- bool "Cache L2 SRAM"
- depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
+config BFIN_L2_DCACHEABLE
+ bool "Enable DCACHE for L2 SRAM"
+ depends on BFIN_DCACHE
+ depends on BF54x || BF561
default n
- help
- Select to make L2 SRAM cacheable in L1 data and instruction cache.
+choice
+ prompt "L2 SRAM DCACHE policy"
+ depends on BFIN_L2_DCACHEABLE
+ default BFIN_L2_WRITEBACK
+config BFIN_L2_WRITEBACK
+ bool "Write back"
+ depends on !SMP
+
+config BFIN_L2_WRITETHROUGH
+ bool "Write through"
+ depends on !SMP
+endchoice
+
+comment "Memory Protection Unit"
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
memory they do not own. This comes at a performance penalty
and is recommended only for debugging.
-comment "Asynchonous Memory Configuration"
+comment "Asynchronous Memory Configuration"
menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
default n
choice
- prompt"Enable Asynchonous Memory Banks"
+ prompt "Enable Asynchronous Memory Banks"
default C_AMBEN_ALL
config C_AMBEN
menu "EBIU_AMBCTL Control"
config BANK_0
- hex "Bank 0"
+ hex "Bank 0 (AMBCTL0.L)"
default 0x7BB0
+ help
+ These are the low 16 bits of the EBIU_AMBCTL0 MMR which are
+ used to control the Asynchronous Memory Bank 0 settings.
config BANK_1
- hex "Bank 1"
+ hex "Bank 1 (AMBCTL0.H)"
default 0x7BB0
default 0x5558 if BF54x
+ help
+ These are the high 16 bits of the EBIU_AMBCTL0 MMR which are
+ used to control the Asynchronous Memory Bank 1 settings.
config BANK_2
- hex "Bank 2"
+ hex "Bank 2 (AMBCTL1.L)"
default 0x7BB0
+ help
+ These are the low 16 bits of the EBIU_AMBCTL1 MMR which are
+ used to control the Asynchronous Memory Bank 2 settings.
config BANK_3
- hex "Bank 3"
+ hex "Bank 3 (AMBCTL1.H)"
default 0x99B3
+ help
+ These are the high 16 bits of the EBIU_AMBCTL1 MMR which are
+ used to control the Asynchronous Memory Bank 3 settings.
+
endmenu
config EBIU_MBSCTLVAL
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
+ depends on PM && !BF54x
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+ (all processors, except ADSP-BF549). This option sets
+ the general-purpose wake-up enable (GPWE) control bit to enable
+ wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+ On ADSP-BF549 this option enables the the same functionality on the
+ /MRXON pin also PH7.
+
endmenu
menu "CPU Frequency scaling"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff