/*
* linux/arch/arm/plat-omap/dma.c
*
- * Copyright (C) 2003 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
* DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
* Graphics DMA and LCD DMA graphics tranformations
* by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/dma.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#include <mach/tc.h>
-#include <asm/arch/tc.h>
+#undef DEBUG
+
+#ifndef CONFIG_ARCH_OMAP1
+enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
+ DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
+};
-#define OMAP_DMA_ACTIVE 0x01
+enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
+#endif
-#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP_DMA_ACTIVE 0x01
+#define OMAP_DMA_CCR_EN (1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
-#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
+#define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
-static int enable_1510_mode = 0;
+static int enable_1510_mode;
struct omap_dma_lch {
int next_lch;
u16 saved_csr;
u16 enabled_irqs;
const char *dev_name;
- void (* callback)(int lch, u16 ch_status, void *data);
+ void (*callback)(int lch, u16 ch_status, void *data);
void *data;
+
+#ifndef CONFIG_ARCH_OMAP1
+ /* required for Dynamic chaining */
+ int prev_linked_ch;
+ int next_linked_ch;
+ int state;
+ int chain_id;
+
+ int status;
+#endif
long flags;
};
+struct dma_link_info {
+ int *linked_dmach_q;
+ int no_of_lchs_linked;
+
+ int q_count;
+ int q_tail;
+ int q_head;
+
+ int chain_state;
+ int chain_mode;
+
+};
+
+static struct dma_link_info *dma_linked_lch;
+
+#ifndef CONFIG_ARCH_OMAP1
+
+/* Chain handling macros */
+#define OMAP_DMA_CHAIN_QINIT(chain_id) \
+ do { \
+ dma_linked_lch[chain_id].q_head = \
+ dma_linked_lch[chain_id].q_tail = \
+ dma_linked_lch[chain_id].q_count = 0; \
+ } while (0)
+#define OMAP_DMA_CHAIN_QFULL(chain_id) \
+ (dma_linked_lch[chain_id].no_of_lchs_linked == \
+ dma_linked_lch[chain_id].q_count)
+#define OMAP_DMA_CHAIN_QLAST(chain_id) \
+ do { \
+ ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
+ dma_linked_lch[chain_id].q_count) \
+ } while (0)
+#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
+ (0 == dma_linked_lch[chain_id].q_count)
+#define __OMAP_DMA_CHAIN_INCQ(end) \
+ ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
+#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
+ do { \
+ __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
+ dma_linked_lch[chain_id].q_count--; \
+ } while (0)
+
+#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
+ do { \
+ __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
+ dma_linked_lch[chain_id].q_count++; \
+ } while (0)
+#endif
+
+static int dma_lch_count;
static int dma_chan_count;
+static int omap_dma_reserve_channels;
static spinlock_t dma_chan_lock;
-static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
+static struct omap_dma_lch *dma_chan;
+static void __iomem *omap_dma_base;
-const static u8 dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
+static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
};
+static inline void disable_lnk(int lch);
+static void omap_disable_channel_irq(int lch);
+static inline void omap_enable_channel_irq(int lch);
+
+#define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
+ __func__);
+
+#define dma_read(reg) \
+({ \
+ u32 __val; \
+ if (cpu_class_is_omap1()) \
+ __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
+ else \
+ __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
+ __val; \
+})
+
+#define dma_write(val, reg) \
+({ \
+ if (cpu_class_is_omap1()) \
+ __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
+ else \
+ __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
+})
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+int omap_dma_in_1510_mode(void)
+{
+ return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode() 0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
static inline int get_gdma_dev(int req)
{
u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
l |= (dev - 1) << shift;
omap_writel(l, reg);
}
+#else
+#define set_gdma_dev(req, dev) do {} while (0)
+#endif
+/* Omap1 only */
static void clear_lch_regs(int lch)
{
int i;
- u32 lch_base = OMAP_DMA_BASE + lch * 0x40;
+ void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
for (i = 0; i < 0x2c; i += 2)
- omap_writew(0, lch_base + i);
+ __raw_writew(0, lch_base + i);
}
-void omap_set_dma_priority(int dst_port, int priority)
+void omap_set_dma_priority(int lch, int dst_port, int priority)
{
unsigned long reg;
u32 l;
- switch (dst_port) {
- case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
- reg = OMAP_TC_OCPT1_PRIOR;
- break;
- case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
- reg = OMAP_TC_OCPT2_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
- reg = OMAP_TC_EMIFF_PRIOR;
- break;
- case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
- reg = OMAP_TC_EMIFS_PRIOR;
- break;
- default:
- BUG();
- return;
+ if (cpu_class_is_omap1()) {
+ switch (dst_port) {
+ case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
+ reg = OMAP_TC_OCPT1_PRIOR;
+ break;
+ case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
+ reg = OMAP_TC_OCPT2_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
+ reg = OMAP_TC_EMIFF_PRIOR;
+ break;
+ case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
+ reg = OMAP_TC_EMIFS_PRIOR;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ l = omap_readl(reg);
+ l &= ~(0xf << 8);
+ l |= (priority & 0xf) << 8;
+ omap_writel(l, reg);
+ }
+
+ if (cpu_class_is_omap2()) {
+ u32 ccr;
+
+ ccr = dma_read(CCR(lch));
+ if (priority)
+ ccr |= (1 << 6);
+ else
+ ccr &= ~(1 << 6);
+ dma_write(ccr, CCR(lch));
}
- l = omap_readl(reg);
- l &= ~(0xf << 8);
- l |= (priority & 0xf) << 8;
- omap_writel(l, reg);
}
+EXPORT_SYMBOL(omap_set_dma_priority);
void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
- int frame_count, int sync_mode)
+ int frame_count, int sync_mode,
+ int dma_trigger, int src_or_dst_synch)
{
- u16 w;
+ u32 l;
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~0x03;
- w |= data_type;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ l = dma_read(CSDP(lch));
+ l &= ~0x03;
+ l |= data_type;
+ dma_write(l, CSDP(lch));
+
+ if (cpu_class_is_omap1()) {
+ u16 ccr;
+
+ ccr = dma_read(CCR(lch));
+ ccr &= ~(1 << 5);
+ if (sync_mode == OMAP_DMA_SYNC_FRAME)
+ ccr |= 1 << 5;
+ dma_write(ccr, CCR(lch));
+
+ ccr = dma_read(CCR2(lch));
+ ccr &= ~(1 << 2);
+ if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+ ccr |= 1 << 2;
+ dma_write(ccr, CCR2(lch));
+ }
+
+ if (cpu_class_is_omap2() && dma_trigger) {
+ u32 val;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(1 << 5);
- if (sync_mode == OMAP_DMA_SYNC_FRAME)
- w |= 1 << 5;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ val = dma_read(CCR(lch));
- w = omap_readw(OMAP_DMA_CCR2(lch));
- w &= ~(1 << 2);
- if (sync_mode == OMAP_DMA_SYNC_BLOCK)
- w |= 1 << 2;
- omap_writew(w, OMAP_DMA_CCR2(lch));
+ /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+ val &= ~((3 << 19) | 0x1f);
+ val |= (dma_trigger & ~0x1f) << 14;
+ val |= dma_trigger & 0x1f;
- omap_writew(elem_count, OMAP_DMA_CEN(lch));
- omap_writew(frame_count, OMAP_DMA_CFN(lch));
+ if (sync_mode & OMAP_DMA_SYNC_FRAME)
+ val |= 1 << 5;
+ else
+ val &= ~(1 << 5);
+ if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+ val |= 1 << 18;
+ else
+ val &= ~(1 << 18);
+
+ if (src_or_dst_synch)
+ val |= 1 << 24; /* source synch */
+ else
+ val &= ~(1 << 24); /* dest synch */
+
+ dma_write(val, CCR(lch));
+ }
+
+ dma_write(elem_count, CEN(lch));
+ dma_write(frame_count, CFN(lch));
}
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
+
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
- u16 w;
-
BUG_ON(omap_dma_in_1510_mode());
- w = omap_readw(OMAP_DMA_CCR2(lch)) & ~0x03;
- switch (mode) {
- case OMAP_DMA_CONSTANT_FILL:
- w |= 0x01;
- break;
- case OMAP_DMA_TRANSPARENT_COPY:
- w |= 0x02;
- break;
- case OMAP_DMA_COLOR_DIS:
- break;
- default:
- BUG();
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(w, CCR2(lch));
+
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
+ w |= 1; /* Channel type G */
+ }
+ dma_write(w, LCH_CTRL(lch));
+ }
+
+ if (cpu_class_is_omap2()) {
+ u32 val;
+
+ val = dma_read(CCR(lch));
+ val &= ~((1 << 17) | (1 << 16));
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(val, CCR(lch));
+
+ color &= 0xffffff;
+ dma_write(color, COLOR(lch));
}
- omap_writew(w, OMAP_DMA_CCR2(lch));
+}
+EXPORT_SYMBOL(omap_set_dma_color_mode);
- w = omap_readw(OMAP_DMA_LCH_CTRL(lch)) & ~0x0f;
- /* Default is channel type 2D */
- if (mode) {
- omap_writew((u16)color, OMAP_DMA_COLOR_L(lch));
- omap_writew((u16)(color >> 16), OMAP_DMA_COLOR_U(lch));
- w |= 1; /* Channel type G */
+void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
+{
+ if (cpu_class_is_omap2()) {
+ u32 csdp;
+
+ csdp = dma_read(CSDP(lch));
+ csdp &= ~(0x3 << 16);
+ csdp |= (mode << 16);
+ dma_write(csdp, CSDP(lch));
}
- omap_writew(w, OMAP_DMA_LCH_CTRL(lch));
}
+EXPORT_SYMBOL(omap_set_dma_write_mode);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+ if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
+ u32 l;
+ l = dma_read(LCH_CTRL(lch));
+ l &= ~0x7;
+ l |= mode;
+ dma_write(l, LCH_CTRL(lch));
+ }
+}
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
+/* Note that src_port is only for omap1 */
void omap_set_dma_src_params(int lch, int src_port, int src_amode,
- unsigned long src_start)
+ unsigned long src_start,
+ int src_ei, int src_fi)
{
- u16 w;
+ u32 l;
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~(0x1f << 2);
- w |= src_port << 2;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ if (cpu_class_is_omap1()) {
+ u16 w;
+
+ w = dma_read(CSDP(lch));
+ w &= ~(0x1f << 2);
+ w |= src_port << 2;
+ dma_write(w, CSDP(lch));
+ }
+
+ l = dma_read(CCR(lch));
+ l &= ~(0x03 << 12);
+ l |= src_amode << 12;
+ dma_write(l, CCR(lch));
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(0x03 << 12);
- w |= src_amode << 12;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ if (cpu_class_is_omap1()) {
+ dma_write(src_start >> 16, CSSA_U(lch));
+ dma_write((u16)src_start, CSSA_L(lch));
+ }
+
+ if (cpu_class_is_omap2())
+ dma_write(src_start, CSSA(lch));
+
+ dma_write(src_ei, CSEI(lch));
+ dma_write(src_fi, CSFI(lch));
+}
+EXPORT_SYMBOL(omap_set_dma_src_params);
- omap_writew(src_start >> 16, OMAP_DMA_CSSA_U(lch));
- omap_writew(src_start, OMAP_DMA_CSSA_L(lch));
+void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
+{
+ omap_set_dma_transfer_params(lch, params->data_type,
+ params->elem_count, params->frame_count,
+ params->sync_mode, params->trigger,
+ params->src_or_dst_synch);
+ omap_set_dma_src_params(lch, params->src_port,
+ params->src_amode, params->src_start,
+ params->src_ei, params->src_fi);
+
+ omap_set_dma_dest_params(lch, params->dst_port,
+ params->dst_amode, params->dst_start,
+ params->dst_ei, params->dst_fi);
+ if (params->read_prio || params->write_prio)
+ omap_dma_set_prio_lch(lch, params->read_prio,
+ params->write_prio);
}
+EXPORT_SYMBOL(omap_set_dma_params);
void omap_set_dma_src_index(int lch, int eidx, int fidx)
{
- omap_writew(eidx, OMAP_DMA_CSEI(lch));
- omap_writew(fidx, OMAP_DMA_CSFI(lch));
+ if (cpu_class_is_omap2())
+ return;
+
+ dma_write(eidx, CSEI(lch));
+ dma_write(fidx, CSFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_index);
void omap_set_dma_src_data_pack(int lch, int enable)
{
- u16 w;
+ u32 l;
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 6);
- w |= enable ? (1 << 6) : 0;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ l = dma_read(CSDP(lch));
+ l &= ~(1 << 6);
+ if (enable)
+ l |= (1 << 6);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
- u16 w;
+ unsigned int burst = 0;
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(0x03 << 7);
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 7);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- w |= (0x01 << 7);
+ if (cpu_class_is_omap2())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- /* not supported by current hardware
+ if (cpu_class_is_omap2()) {
+ burst = 0x2;
+ break;
+ }
+ /* not supported by current hardware on OMAP1
* w |= (0x03 << 7);
* fall through
*/
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_class_is_omap2()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
BUG();
}
- omap_writew(w, OMAP_DMA_CSDP(lch));
+
+ l |= (burst << 7);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
+/* Note that dest_port is only for OMAP1 */
void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
- unsigned long dest_start)
+ unsigned long dest_start,
+ int dst_ei, int dst_fi)
{
- u16 w;
+ u32 l;
+
+ if (cpu_class_is_omap1()) {
+ l = dma_read(CSDP(lch));
+ l &= ~(0x1f << 9);
+ l |= dest_port << 9;
+ dma_write(l, CSDP(lch));
+ }
+
+ l = dma_read(CCR(lch));
+ l &= ~(0x03 << 14);
+ l |= dest_amode << 14;
+ dma_write(l, CCR(lch));
- w = omap_readw(OMAP_DMA_CSDP(lch));
- w &= ~(0x1f << 9);
- w |= dest_port << 9;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ if (cpu_class_is_omap1()) {
+ dma_write(dest_start >> 16, CDSA_U(lch));
+ dma_write(dest_start, CDSA_L(lch));
+ }
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~(0x03 << 14);
- w |= dest_amode << 14;
- omap_writew(w, OMAP_DMA_CCR(lch));
+ if (cpu_class_is_omap2())
+ dma_write(dest_start, CDSA(lch));
- omap_writew(dest_start >> 16, OMAP_DMA_CDSA_U(lch));
- omap_writew(dest_start, OMAP_DMA_CDSA_L(lch));
+ dma_write(dst_ei, CDEI(lch));
+ dma_write(dst_fi, CDFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_params);
void omap_set_dma_dest_index(int lch, int eidx, int fidx)
{
- omap_writew(eidx, OMAP_DMA_CDEI(lch));
- omap_writew(fidx, OMAP_DMA_CDFI(lch));
+ if (cpu_class_is_omap2())
+ return;
+
+ dma_write(eidx, CDEI(lch));
+ dma_write(fidx, CDFI(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_index);
void omap_set_dma_dest_data_pack(int lch, int enable)
{
- u16 w;
+ u32 l;
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(1 << 13);
- w |= enable ? (1 << 13) : 0;
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ l = dma_read(CSDP(lch));
+ l &= ~(1 << 13);
+ if (enable)
+ l |= 1 << 13;
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
{
- u16 w;
+ unsigned int burst = 0;
+ u32 l;
+
+ l = dma_read(CSDP(lch));
+ l &= ~(0x03 << 14);
- w = omap_readw(OMAP_DMA_CSDP(lch)) & ~(0x03 << 14);
switch (burst_mode) {
case OMAP_DMA_DATA_BURST_DIS:
break;
case OMAP_DMA_DATA_BURST_4:
- w |= (0x01 << 14);
+ if (cpu_class_is_omap2())
+ burst = 0x1;
+ else
+ burst = 0x2;
break;
case OMAP_DMA_DATA_BURST_8:
- w |= (0x03 << 14);
+ if (cpu_class_is_omap2())
+ burst = 0x2;
+ else
+ burst = 0x3;
break;
+ case OMAP_DMA_DATA_BURST_16:
+ if (cpu_class_is_omap2()) {
+ burst = 0x3;
+ break;
+ }
+ /* OMAP1 don't support burst 16
+ * fall through
+ */
default:
printk(KERN_ERR "Invalid DMA burst mode\n");
BUG();
return;
}
- omap_writew(w, OMAP_DMA_CSDP(lch));
+ l |= (burst << 14);
+ dma_write(l, CSDP(lch));
}
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-static inline void init_intr(int lch)
+static inline void omap_enable_channel_irq(int lch)
{
- u16 w;
+ u32 status;
+
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ status = dma_read(CSR(lch));
+ else if (cpu_class_is_omap2())
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
- /* Read CSR to make sure it's cleared. */
- w = omap_readw(OMAP_DMA_CSR(lch));
/* Enable some nice interrupts. */
- omap_writew(dma_chan[lch].enabled_irqs, OMAP_DMA_CICR(lch));
- dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+ dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
+}
+
+static void omap_disable_channel_irq(int lch)
+{
+ if (cpu_class_is_omap2())
+ dma_write(0, CICR(lch));
+}
+
+void omap_enable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs |= bits;
+}
+EXPORT_SYMBOL(omap_enable_dma_irq);
+
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+ dma_chan[lch].enabled_irqs &= ~bits;
}
+EXPORT_SYMBOL(omap_disable_dma_irq);
static inline void enable_lnk(int lch)
{
- u16 w;
+ u32 l;
- /* Clear the STOP_LNK bits */
- w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
- w &= ~(1 << 14);
- omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+ l = dma_read(CLNK_CTRL(lch));
- /* And set the ENABLE_LNK bits */
+ if (cpu_class_is_omap1())
+ l &= ~(1 << 14);
+
+ /* Set the ENABLE_LNK bits */
if (dma_chan[lch].next_lch != -1)
- omap_writew(dma_chan[lch].next_lch | (1 << 15),
- OMAP_DMA_CLNK_CTRL(lch));
+ l = dma_chan[lch].next_lch | (1 << 15);
+
+#ifndef CONFIG_ARCH_OMAP1
+ if (cpu_class_is_omap2())
+ if (dma_chan[lch].next_linked_ch != -1)
+ l = dma_chan[lch].next_linked_ch | (1 << 15);
+#endif
+
+ dma_write(l, CLNK_CTRL(lch));
}
static inline void disable_lnk(int lch)
{
- u16 w;
+ u32 l;
+
+ l = dma_read(CLNK_CTRL(lch));
/* Disable interrupts */
- omap_writew(0, OMAP_DMA_CICR(lch));
+ if (cpu_class_is_omap1()) {
+ dma_write(0, CICR(lch));
+ /* Set the STOP_LNK bit */
+ l |= 1 << 14;
+ }
- /* Set the STOP_LNK bit */
- w = omap_readw(OMAP_DMA_CLNK_CTRL(lch));
- w |= (1 << 14);
- w = omap_writew(w, OMAP_DMA_CLNK_CTRL(lch));
+ if (cpu_class_is_omap2()) {
+ omap_disable_channel_irq(lch);
+ /* Clear the ENABLE_LNK bit */
+ l &= ~(1 << 15);
+ }
+ dma_write(l, CLNK_CTRL(lch));
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
-void omap_start_dma(int lch)
+static inline void omap2_enable_irq_lch(int lch)
{
- u16 w;
+ u32 val;
- if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
- int next_lch, cur_lch;
- char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+ if (!cpu_class_is_omap2())
+ return;
- dma_chan_link_map[lch] = 1;
- /* Set the link register of the first channel */
- enable_lnk(lch);
+ val = dma_read(IRQENABLE_L0);
+ val |= 1 << lch;
+ dma_write(val, IRQENABLE_L0);
+}
- memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
- cur_lch = dma_chan[lch].next_lch;
- do {
- next_lch = dma_chan[cur_lch].next_lch;
+int omap_request_dma(int dev_id, const char *dev_name,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data, int *dma_ch_out)
+{
+ int ch, free_ch = -1;
+ unsigned long flags;
+ struct omap_dma_lch *chan;
- /* The loop case: we've been here already */
- if (dma_chan_link_map[cur_lch])
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ for (ch = 0; ch < dma_chan_count; ch++) {
+ if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+ free_ch = ch;
+ if (dev_id == 0)
break;
- /* Mark the current channel */
- dma_chan_link_map[cur_lch] = 1;
+ }
+ }
+ if (free_ch == -1) {
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EBUSY;
+ }
+ chan = dma_chan + free_ch;
+ chan->dev_id = dev_id;
- enable_lnk(cur_lch);
- init_intr(cur_lch);
+ if (cpu_class_is_omap1())
+ clear_lch_regs(free_ch);
- cur_lch = next_lch;
- } while (next_lch != -1);
+ if (cpu_class_is_omap2())
+ omap_clear_dma(free_ch);
+
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ chan->dev_name = dev_name;
+ chan->callback = callback;
+ chan->data = data;
+ chan->flags = 0;
+
+#ifndef CONFIG_ARCH_OMAP1
+ if (cpu_class_is_omap2()) {
+ chan->chain_id = -1;
+ chan->next_linked_ch = -1;
}
+#endif
- init_intr(lch);
+ chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
- w = omap_readw(OMAP_DMA_CCR(lch));
- w |= OMAP_DMA_CCR_EN;
- omap_writew(w, OMAP_DMA_CCR(lch));
- dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+ if (cpu_class_is_omap1())
+ chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+ else if (cpu_class_is_omap2())
+ chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+ OMAP2_DMA_TRANS_ERR_IRQ;
+
+ if (cpu_is_omap16xx()) {
+ /* If the sync device is set, configure it dynamically. */
+ if (dev_id != 0) {
+ set_gdma_dev(free_ch + 1, dev_id);
+ dev_id = free_ch + 1;
+ }
+ /*
+ * Disable the 1510 compatibility mode and set the sync device
+ * id.
+ */
+ dma_write(dev_id | (1 << 10), CCR(free_ch));
+ } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
+ dma_write(dev_id, CCR(free_ch));
+ }
+
+ if (cpu_class_is_omap2()) {
+ omap2_enable_irq_lch(free_ch);
+ omap_enable_channel_irq(free_ch);
+ /* Clear the CSR register and IRQ status register */
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
+ dma_write(1 << free_ch, IRQSTATUS_L0);
+ }
+
+ *dma_ch_out = free_ch;
+
+ return 0;
}
+EXPORT_SYMBOL(omap_request_dma);
-void omap_stop_dma(int lch)
+void omap_free_dma(int lch)
{
- u16 w;
+ unsigned long flags;
- if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
- int next_lch, cur_lch = lch;
- char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
+ if (dma_chan[lch].dev_id == -1) {
+ pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
+ lch);
+ return;
+ }
- memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
- do {
- /* The loop case: we've been here already */
- if (dma_chan_link_map[cur_lch])
- break;
- /* Mark the current channel */
- dma_chan_link_map[cur_lch] = 1;
+ if (cpu_class_is_omap1()) {
+ /* Disable all DMA interrupts for the channel. */
+ dma_write(0, CICR(lch));
+ /* Make sure the DMA transfer is stopped. */
+ dma_write(0, CCR(lch));
+ }
- disable_lnk(cur_lch);
+ if (cpu_class_is_omap2()) {
+ u32 val;
+ /* Disable interrupts */
+ val = dma_read(IRQENABLE_L0);
+ val &= ~(1 << lch);
+ dma_write(val, IRQENABLE_L0);
+
+ /* Clear the CSR register and IRQ status register */
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+ dma_write(1 << lch, IRQSTATUS_L0);
+
+ /* Disable all DMA interrupts for the channel. */
+ dma_write(0, CICR(lch));
+
+ /* Make sure the DMA transfer is stopped. */
+ dma_write(0, CCR(lch));
+ omap_clear_dma(lch);
+ }
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+EXPORT_SYMBOL(omap_free_dma);
+
+/**
+ * @brief omap_dma_set_global_params : Set global priority settings for dma
+ *
+ * @param arb_rate
+ * @param max_fifo_depth
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * DMA_THREAD_RESERVE_ONET
+ * DMA_THREAD_RESERVE_TWOT
+ * DMA_THREAD_RESERVE_THREET
+ */
+void
+omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
+{
+ u32 reg;
+
+ if (!cpu_class_is_omap2()) {
+ printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
+ return;
+ }
+
+ if (max_fifo_depth == 0)
+ max_fifo_depth = 1;
+ if (arb_rate == 0)
+ arb_rate = 1;
+
+ reg = 0xff & max_fifo_depth;
+ reg |= (0x3 & tparams) << 12;
+ reg |= (arb_rate & 0xff) << 16;
+
+ dma_write(reg, GCR);
+}
+EXPORT_SYMBOL(omap_dma_set_global_params);
+
+/**
+ * @brief omap_dma_set_prio_lch : Set channel wise priority settings
+ *
+ * @param lch
+ * @param read_prio - Read priority
+ * @param write_prio - Write priority
+ * Both of the above can be set with one of the following values :
+ * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
+ */
+int
+omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+ unsigned char write_prio)
+{
+ u32 l;
+
+ if (unlikely((lch < 0 || lch >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid channel id\n");
+ return -EINVAL;
+ }
+ l = dma_read(CCR(lch));
+ l &= ~((1 << 6) | (1 << 26));
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
+ else
+ l |= ((read_prio & 0x1) << 6);
+
+ dma_write(l, CCR(lch));
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_dma_set_prio_lch);
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+void omap_clear_dma(int lch)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (cpu_class_is_omap1()) {
+ u32 l;
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
+ /* Clear pending interrupts */
+ l = dma_read(CSR(lch));
+ }
+
+ if (cpu_class_is_omap2()) {
+ int i;
+ void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
+ for (i = 0; i < 0x44; i += 4)
+ __raw_writel(0, lch_base + i);
+ }
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(omap_clear_dma);
+
+void omap_start_dma(int lch)
+{
+ u32 l;
+
+ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+ int next_lch, cur_lch;
+ char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+
+ dma_chan_link_map[lch] = 1;
+ /* Set the link register of the first channel */
+ enable_lnk(lch);
+
+ memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+ cur_lch = dma_chan[lch].next_lch;
+ do {
+ next_lch = dma_chan[cur_lch].next_lch;
+
+ /* The loop case: we've been here already */
+ if (dma_chan_link_map[cur_lch])
+ break;
+ /* Mark the current channel */
+ dma_chan_link_map[cur_lch] = 1;
+
+ enable_lnk(cur_lch);
+ omap_enable_channel_irq(cur_lch);
+
+ cur_lch = next_lch;
+ } while (next_lch != -1);
+ } else if (cpu_is_omap242x() ||
+ (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
+
+ /* Errata: Need to write lch even if not using chaining */
+ dma_write(lch, CLNK_CTRL(lch));
+ }
+
+ omap_enable_channel_irq(lch);
+
+ l = dma_read(CCR(lch));
+
+ /*
+ * Errata: On ES2.0 BUFFERING disable must be set.
+ * This will always fail on ES1.0
+ */
+ if (cpu_is_omap24xx())
+ l |= OMAP_DMA_CCR_EN;
+
+ l |= OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
+ dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_start_dma);
+
+void omap_stop_dma(int lch)
+{
+ u32 l;
+
+ /* Disable all interrupts on the channel */
+ if (cpu_class_is_omap1())
+ dma_write(0, CICR(lch));
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
+ if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+ int next_lch, cur_lch = lch;
+ char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+
+ memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+ do {
+ /* The loop case: we've been here already */
+ if (dma_chan_link_map[cur_lch])
+ break;
+ /* Mark the current channel */
+ dma_chan_link_map[cur_lch] = 1;
+
+ disable_lnk(cur_lch);
+
+ next_lch = dma_chan[cur_lch].next_lch;
+ cur_lch = next_lch;
+ } while (next_lch != -1);
+ }
+
+ dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_stop_dma);
+
+/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+int omap_set_dma_callback(int lch,
+ void (*callback)(int lch, u16 ch_status, void *data),
+ void *data)
+{
+ unsigned long flags;
+
+ if (lch < 0)
+ return -ENODEV;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ if (dma_chan[lch].dev_id == -1) {
+ printk(KERN_ERR "DMA callback for not set for free channel\n");
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+ return -EINVAL;
+ }
+ dma_chan[lch].callback = callback;
+ dma_chan[lch].data = data;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_set_dma_callback);
+
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
+{
+ dma_addr_t offset = 0;
+
+ if (cpu_is_omap15xx())
+ offset = dma_read(CPC(lch));
+ else
+ offset = dma_read(CSAC(lch));
+
+ /*
+ * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx() && offset == 0)
+ offset = dma_read(CSAC(lch));
+
+ if (cpu_class_is_omap1())
+ offset |= (dma_read(CSSA_U(lch)) << 16);
+
+ return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_src_pos);
+
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
+{
+ dma_addr_t offset = 0;
+
+ if (cpu_is_omap15xx())
+ offset = dma_read(CPC(lch));
+ else
+ offset = dma_read(CDAC(lch));
+
+ /*
+ * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+ * read before the DMA controller finished disabling the channel.
+ */
+ if (!cpu_is_omap15xx() && offset == 0)
+ offset = dma_read(CDAC(lch));
+
+ if (cpu_class_is_omap1())
+ offset |= (dma_read(CDSA_U(lch)) << 16);
+
+ return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
+
+int omap_get_dma_active_status(int lch)
+{
+ return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
+}
+EXPORT_SYMBOL(omap_get_dma_active_status);
+
+int omap_dma_running(void)
+{
+ int lch;
+
+ /* Check if LCD DMA is running */
+ if (cpu_is_omap16xx())
+ if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+ return 1;
+
+ for (lch = 0; lch < dma_chan_count; lch++)
+ if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * lch_queue DMA will start right after lch_head one is finished.
+ * For this DMA link to start, you still need to start (see omap_start_dma)
+ * the first one. That will fire up the entire queue.
+ */
+void omap_dma_link_lch(int lch_head, int lch_queue)
+{
+ if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+ CCR(lch_head));
+ return;
+ }
+ printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
+ BUG();
+ return;
+ }
+
+ if ((dma_chan[lch_head].dev_id == -1) ||
+ (dma_chan[lch_queue].dev_id == -1)) {
+ printk(KERN_ERR "omap_dma: trying to link "
+ "non requested channels\n");
+ dump_stack();
+ }
+
+ dma_chan[lch_head].next_lch = lch_queue;
+}
+EXPORT_SYMBOL(omap_dma_link_lch);
+
+/*
+ * Once the DMA queue is stopped, we can destroy it.
+ */
+void omap_dma_unlink_lch(int lch_head, int lch_queue)
+{
+ if (omap_dma_in_1510_mode()) {
+ if (lch_head == lch_queue) {
+ dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+ CCR(lch_head));
+ return;
+ }
+ printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
+ BUG();
+ return;
+ }
+
+ if (dma_chan[lch_head].next_lch != lch_queue ||
+ dma_chan[lch_head].next_lch == -1) {
+ printk(KERN_ERR "omap_dma: trying to unlink "
+ "non linked channels\n");
+ dump_stack();
+ }
+
+ if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
+ (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+ printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
+ "before unlinking\n");
+ dump_stack();
+ }
+
+ dma_chan[lch_head].next_lch = -1;
+}
+EXPORT_SYMBOL(omap_dma_unlink_lch);
+
+/*----------------------------------------------------------------------------*/
+
+#ifndef CONFIG_ARCH_OMAP1
+/* Create chain of DMA channesls */
+static void create_dma_lch_chain(int lch_head, int lch_queue)
+{
+ u32 l;
+
+ /* Check if this is the first link in chain */
+ if (dma_chan[lch_head].next_linked_ch == -1) {
+ dma_chan[lch_head].next_linked_ch = lch_queue;
+ dma_chan[lch_head].prev_linked_ch = lch_queue;
+ dma_chan[lch_queue].next_linked_ch = lch_head;
+ dma_chan[lch_queue].prev_linked_ch = lch_head;
+ }
+
+ /* a link exists, link the new channel in circular chain */
+ else {
+ dma_chan[lch_queue].next_linked_ch =
+ dma_chan[lch_head].next_linked_ch;
+ dma_chan[lch_queue].prev_linked_ch = lch_head;
+ dma_chan[lch_head].next_linked_ch = lch_queue;
+ dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
+ lch_queue;
+ }
+
+ l = dma_read(CLNK_CTRL(lch_head));
+ l &= ~(0x1f);
+ l |= lch_queue;
+ dma_write(l, CLNK_CTRL(lch_head));
+
+ l = dma_read(CLNK_CTRL(lch_queue));
+ l &= ~(0x1f);
+ l |= (dma_chan[lch_queue].next_linked_ch);
+ dma_write(l, CLNK_CTRL(lch_queue));
+}
+
+/**
+ * @brief omap_request_dma_chain : Request a chain of DMA channels
+ *
+ * @param dev_id - Device id using the dma channel
+ * @param dev_name - Device name
+ * @param callback - Call back function
+ * @chain_id -
+ * @no_of_chans - Number of channels requested
+ * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
+ * OMAP_DMA_DYNAMIC_CHAIN
+ * @params - Channel parameters
+ *
+ * @return - Success : 0
+ * Failure: -EINVAL/-ENOMEM
+ */
+int omap_request_dma_chain(int dev_id, const char *dev_name,
+ void (*callback) (int lch, u16 ch_status,
+ void *data),
+ int *chain_id, int no_of_chans, int chain_mode,
+ struct omap_dma_channel_params params)
+{
+ int *channels;
+ int i, err;
+
+ /* Is the chain mode valid ? */
+ if (chain_mode != OMAP_DMA_STATIC_CHAIN
+ && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
+ printk(KERN_ERR "Invalid chain mode requested\n");
+ return -EINVAL;
+ }
+
+ if (unlikely((no_of_chans < 1
+ || no_of_chans > dma_lch_count))) {
+ printk(KERN_ERR "Invalid Number of channels requested\n");
+ return -EINVAL;
+ }
+
+ /* Allocate a queue to maintain the status of the channels
+ * in the chain */
+ channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
+ if (channels == NULL) {
+ printk(KERN_ERR "omap_dma: No memory for channel queue\n");
+ return -ENOMEM;
+ }
+
+ /* request and reserve DMA channels for the chain */
+ for (i = 0; i < no_of_chans; i++) {
+ err = omap_request_dma(dev_id, dev_name,
+ callback, NULL, &channels[i]);
+ if (err < 0) {
+ int j;
+ for (j = 0; j < i; j++)
+ omap_free_dma(channels[j]);
+ kfree(channels);
+ printk(KERN_ERR "omap_dma: Request failed %d\n", err);
+ return err;
+ }
+ dma_chan[channels[i]].prev_linked_ch = -1;
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+
+ /*
+ * Allowing client drivers to set common parameters now,
+ * so that later only relevant (src_start, dest_start
+ * and element count) can be set
+ */
+ omap_set_dma_params(channels[i], ¶ms);
+ }
+
+ *chain_id = channels[0];
+ dma_linked_lch[*chain_id].linked_dmach_q = channels;
+ dma_linked_lch[*chain_id].chain_mode = chain_mode;
+ dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
+ dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
+
+ for (i = 0; i < no_of_chans; i++)
+ dma_chan[channels[i]].chain_id = *chain_id;
+
+ /* Reset the Queue pointers */
+ OMAP_DMA_CHAIN_QINIT(*chain_id);
+
+ /* Set up the chain */
+ if (no_of_chans == 1)
+ create_dma_lch_chain(channels[0], channels[0]);
+ else {
+ for (i = 0; i < (no_of_chans - 1); i++)
+ create_dma_lch_chain(channels[i], channels[i + 1]);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_request_dma_chain);
+
+/**
+ * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
+ * params after setting it. Dont do this while dma is running!!
+ *
+ * @param chain_id - Chained logical channel id.
+ * @param params
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_modify_dma_chain_params(int chain_id,
+ struct omap_dma_channel_params params)
+{
+ int *channels;
+ u32 i;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0
+ || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+ /*
+ * Allowing client drivers to set common parameters now,
+ * so that later only relevant (src_start, dest_start
+ * and element count) can be set
+ */
+ omap_set_dma_params(channels[i], ¶ms);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_modify_dma_chain_params);
+
+/**
+ * @brief omap_free_dma_chain - Free all the logical channels in a chain.
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_free_dma_chain(int chain_id)
+{
+ int *channels;
+ u32 i;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+ dma_chan[channels[i]].next_linked_ch = -1;
+ dma_chan[channels[i]].prev_linked_ch = -1;
+ dma_chan[channels[i]].chain_id = -1;
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+ omap_free_dma(channels[i]);
+ }
+
+ kfree(channels);
+
+ dma_linked_lch[chain_id].linked_dmach_q = NULL;
+ dma_linked_lch[chain_id].chain_mode = -1;
+ dma_linked_lch[chain_id].chain_state = -1;
+
+ return (0);
+}
+EXPORT_SYMBOL(omap_free_dma_chain);
+
+/**
+ * @brief omap_dma_chain_status - Check if the chain is in
+ * active / inactive state.
+ * @param chain_id
+ *
+ * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
+ * Failure : -EINVAL
+ */
+int omap_dma_chain_status(int chain_id)
+{
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
+ dma_linked_lch[chain_id].q_count);
+
+ if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
+ return OMAP_DMA_CHAIN_INACTIVE;
+
+ return OMAP_DMA_CHAIN_ACTIVE;
+}
+EXPORT_SYMBOL(omap_dma_chain_status);
+
+/**
+ * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
+ * set the params and start the transfer.
+ *
+ * @param chain_id
+ * @param src_start - buffer start address
+ * @param dest_start - Dest address
+ * @param elem_count
+ * @param frame_count
+ * @param callbk_data - channel callback parameter data.
+ *
+ * @return - Success : 0
+ * Failure: -EINVAL/-EBUSY
+ */
+int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
+ int elem_count, int frame_count, void *callbk_data)
+{
+ int *channels;
+ u32 l, lch;
+ int start_dma = 0;
+
+ /*
+ * if buffer size is less than 1 then there is
+ * no use of starting the chain
+ */
+ if (elem_count < 1) {
+ printk(KERN_ERR "Invalid buffer size\n");
+ return -EINVAL;
+ }
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0
+ || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exist\n");
+ return -EINVAL;
+ }
+
+ /* Check if all the channels in chain are in use */
+ if (OMAP_DMA_CHAIN_QFULL(chain_id))
+ return -EBUSY;
+
+ /* Frame count may be negative in case of indexed transfers */
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get a free channel */
+ lch = channels[dma_linked_lch[chain_id].q_tail];
+
+ /* Store the callback data */
+ dma_chan[lch].data = callbk_data;
+
+ /* Increment the q_tail */
+ OMAP_DMA_CHAIN_INCQTAIL(chain_id);
+
+ /* Set the params to the free channel */
+ if (src_start != 0)
+ dma_write(src_start, CSSA(lch));
+ if (dest_start != 0)
+ dma_write(dest_start, CDSA(lch));
+
+ /* Write the buffer size */
+ dma_write(elem_count, CEN(lch));
+ dma_write(frame_count, CFN(lch));
+
+ /*
+ * If the chain is dynamically linked,
+ * then we may have to start the chain if its not active
+ */
+ if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
+
+ /*
+ * In Dynamic chain, if the chain is not started,
+ * queue the channel
+ */
+ if (dma_linked_lch[chain_id].chain_state ==
+ DMA_CHAIN_NOTSTARTED) {
+ /* Enable the link in previous channel */
+ if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
+ DMA_CH_QUEUED)
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ }
+
+ /*
+ * Chain is already started, make sure its active,
+ * if not then start the chain
+ */
+ else {
+ start_dma = 1;
+
+ if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
+ DMA_CH_STARTED) {
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ start_dma = 0;
+ if (0 == ((1 << 7) & dma_read(
+ CCR(dma_chan[lch].prev_linked_ch)))) {
+ disable_lnk(dma_chan[lch].
+ prev_linked_ch);
+ pr_debug("\n prev ch is stopped\n");
+ start_dma = 1;
+ }
+ }
+
+ else if (dma_chan[dma_chan[lch].prev_linked_ch].state
+ == DMA_CH_QUEUED) {
+ enable_lnk(dma_chan[lch].prev_linked_ch);
+ dma_chan[lch].state = DMA_CH_QUEUED;
+ start_dma = 0;
+ }
+ omap_enable_channel_irq(lch);
+
+ l = dma_read(CCR(lch));
+
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
+ else
+ l |= (1 << 25);
+ if (start_dma == 1) {
+ if (0 == (l & (1 << 7))) {
+ l |= (1 << 7);
+ dma_chan[lch].state = DMA_CH_STARTED;
+ pr_debug("starting %d\n", lch);
+ dma_write(l, CCR(lch));
+ } else
+ start_dma = 0;
+ } else {
+ if (0 == (l & (1 << 7)))
+ dma_write(l, CCR(lch));
+ }
+ dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_dma_chain_a_transfer);
+
+/**
+ * @brief omap_start_dma_chain_transfers - Start the chain
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL/-EBUSY
+ */
+int omap_start_dma_chain_transfers(int chain_id)
+{
+ int *channels;
+ u32 l, i;
+
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
+ printk(KERN_ERR "Chain is already started\n");
+ return -EBUSY;
+ }
+
+ if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
+ i++) {
+ enable_lnk(channels[i]);
+ omap_enable_channel_irq(channels[i]);
+ }
+ } else {
+ omap_enable_channel_irq(channels[0]);
+ }
+
+ l = dma_read(CCR(channels[0]));
+ l |= (1 << 7);
+ dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
+ dma_chan[channels[0]].state = DMA_CH_STARTED;
+
+ if ((0 == (l & (1 << 24))))
+ l &= ~(1 << 25);
+ else
+ l |= (1 << 25);
+ dma_write(l, CCR(channels[0]));
+
+ dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_start_dma_chain_transfers);
+
+/**
+ * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
+ *
+ * @param chain_id
+ *
+ * @return - Success : 0
+ * Failure : EINVAL
+ */
+int omap_stop_dma_chain_transfers(int chain_id)
+{
+ int *channels;
+ u32 l, i;
+ u32 sys_cf;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /*
+ * DMA Errata:
+ * Special programming model needed to disable DMA before end of block
+ */
+ sys_cf = dma_read(OCP_SYSCONFIG);
+ l = sys_cf;
+ /* Middle mode reg set no Standby */
+ l &= ~((1 << 12)|(1 << 13));
+ dma_write(l, OCP_SYSCONFIG);
+
+ for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
+
+ /* Stop the Channel transmission */
+ l = dma_read(CCR(channels[i]));
+ l &= ~(1 << 7);
+ dma_write(l, CCR(channels[i]));
+
+ /* Disable the link in all the channels */
+ disable_lnk(channels[i]);
+ dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
+
+ }
+ dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
+
+ /* Reset the Queue pointers */
+ OMAP_DMA_CHAIN_QINIT(chain_id);
+
+ /* Errata - put in the old value */
+ dma_write(sys_cf, OCP_SYSCONFIG);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
+
+/* Get the index of the ongoing DMA in chain */
+/**
+ * @brief omap_get_dma_chain_index - Get the element and frame index
+ * of the ongoing DMA in chain
+ *
+ * @param chain_id
+ * @param ei - Element index
+ * @param fi - Frame index
+ *
+ * @return - Success : 0
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
+{
+ int lch;
+ int *channels;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+ if ((!ei) || (!fi))
+ return -EINVAL;
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ *ei = dma_read(CCEN(lch));
+ *fi = dma_read(CCFN(lch));
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_get_dma_chain_index);
+
+/**
+ * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
+ * ongoing DMA in chain
+ *
+ * @param chain_id
+ *
+ * @return - Success : Destination position
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_dst_pos(int chain_id)
+{
+ int lch;
+ int *channels;
- next_lch = dma_chan[cur_lch].next_lch;
- cur_lch = next_lch;
- } while (next_lch != -1);
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
- return;
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
}
- /* Disable all interrupts on the channel */
- omap_writew(0, OMAP_DMA_CICR(lch));
- w = omap_readw(OMAP_DMA_CCR(lch));
- w &= ~OMAP_DMA_CCR_EN;
- omap_writew(w, OMAP_DMA_CCR(lch));
- dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
-}
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
-void omap_enable_dma_irq(int lch, u16 bits)
-{
- dma_chan[lch].enabled_irqs |= bits;
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ return dma_read(CDAC(lch));
}
+EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
-void omap_disable_dma_irq(int lch, u16 bits)
+/**
+ * @brief omap_get_dma_chain_src_pos - Get the source position
+ * of the ongoing DMA in chain
+ * @param chain_id
+ *
+ * @return - Success : Destination position
+ * Failure : -EINVAL
+ */
+int omap_get_dma_chain_src_pos(int chain_id)
{
- dma_chan[lch].enabled_irqs &= ~bits;
+ int lch;
+ int *channels;
+
+ /* Check for input params */
+ if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
+ printk(KERN_ERR "Invalid chain id\n");
+ return -EINVAL;
+ }
+
+ /* Check if the chain exists */
+ if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
+ printk(KERN_ERR "Chain doesn't exists\n");
+ return -EINVAL;
+ }
+
+ channels = dma_linked_lch[chain_id].linked_dmach_q;
+
+ /* Get the current channel */
+ lch = channels[dma_linked_lch[chain_id].q_head];
+
+ return dma_read(CSAC(lch));
}
+EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
+#endif /* ifndef CONFIG_ARCH_OMAP1 */
+
+/*----------------------------------------------------------------------------*/
-static int dma_handle_ch(int ch)
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
{
- u16 csr;
+ u32 csr;
if (enable_1510_mode && ch >= 6) {
csr = dma_chan[ch].saved_csr;
dma_chan[ch].saved_csr = 0;
} else
- csr = omap_readw(OMAP_DMA_CSR(ch));
+ csr = dma_read(CSR(ch));
if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
dma_chan[ch + 6].saved_csr = csr >> 7;
csr &= 0x7f;
}
- if (!csr)
+ if ((csr & 0x3f) == 0)
return 0;
if (unlikely(dma_chan[ch].dev_id == -1)) {
- printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
- ch, csr);
+ printk(KERN_WARNING "Spurious interrupt from DMA channel "
+ "%d (CSR %04x)\n", ch, csr);
return 0;
}
- if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
- printk(KERN_WARNING "DMA timeout with device %d\n", dma_chan[ch].dev_id);
- if (unlikely(csr & OMAP_DMA_DROP_IRQ))
- printk(KERN_WARNING "DMA synchronization event drop occurred with device %d\n",
+ if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
+ printk(KERN_WARNING "DMA timeout with device %d\n",
dma_chan[ch].dev_id);
+ if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+ printk(KERN_WARNING "DMA synchronization event drop occurred "
+ "with device %d\n", dma_chan[ch].dev_id);
if (likely(csr & OMAP_DMA_BLOCK_IRQ))
dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
return 1;
}
-static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
{
int ch = ((int) dev_id) - 1;
int handled = 0;
for (;;) {
int handled_now = 0;
- handled_now += dma_handle_ch(ch);
+ handled_now += omap1_dma_handle_ch(ch);
if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
- handled_now += dma_handle_ch(ch + 6);
+ handled_now += omap1_dma_handle_ch(ch + 6);
if (!handled_now)
break;
handled += handled_now;
return handled ? IRQ_HANDLED : IRQ_NONE;
}
-int omap_request_dma(int dev_id, const char *dev_name,
- void (* callback)(int lch, u16 ch_status, void *data),
- void *data, int *dma_ch_out)
+#else
+#define omap1_dma_irq_handler NULL
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+
+static int omap2_dma_handle_ch(int ch)
{
- int ch, free_ch = -1;
- unsigned long flags;
- struct omap_dma_lch *chan;
+ u32 status = dma_read(CSR(ch));
- spin_lock_irqsave(&dma_chan_lock, flags);
- for (ch = 0; ch < dma_chan_count; ch++) {
- if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
- free_ch = ch;
- if (dev_id == 0)
- break;
- }
+ if (!status) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
+ ch);
+ dma_write(1 << ch, IRQSTATUS_L0);
+ return 0;
}
- if (free_ch == -1) {
- spin_unlock_irqrestore(&dma_chan_lock, flags);
- return -EBUSY;
+ if (unlikely(dma_chan[ch].dev_id == -1)) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
+ "channel %d\n", status, ch);
+ return 0;
}
- chan = dma_chan + free_ch;
- chan->dev_id = dev_id;
- clear_lch_regs(free_ch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
- chan->dev_id = dev_id;
- chan->dev_name = dev_name;
- chan->callback = callback;
- chan->data = data;
- chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
-
- if (cpu_is_omap16xx()) {
- /* If the sync device is set, configure it dynamically. */
- if (dev_id != 0) {
- set_gdma_dev(free_ch + 1, dev_id);
- dev_id = free_ch + 1;
+ if (unlikely(status & OMAP_DMA_DROP_IRQ))
+ printk(KERN_INFO
+ "DMA synchronization event drop occurred with device "
+ "%d\n", dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
+ printk(KERN_INFO "DMA transaction error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (cpu_class_is_omap2()) {
+ /* Errata: sDMA Channel is not disabled
+ * after a transaction error. So we explicitely
+ * disable the channel
+ */
+ u32 ccr;
+
+ ccr = dma_read(CCR(ch));
+ ccr &= ~OMAP_DMA_CCR_EN;
+ dma_write(ccr, CCR(ch));
+ dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
}
- /* Disable the 1510 compatibility mode and set the sync device
- * id. */
- omap_writew(dev_id | (1 << 10), OMAP_DMA_CCR(free_ch));
- } else {
- omap_writew(dev_id, OMAP_DMA_CCR(free_ch));
}
- *dma_ch_out = free_ch;
-
- return 0;
-}
-
-void omap_free_dma(int ch)
-{
- unsigned long flags;
+ if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+ printk(KERN_INFO "DMA secure error with device %d\n",
+ dma_chan[ch].dev_id);
+ if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+ printk(KERN_INFO "DMA misaligned error with device %d\n",
+ dma_chan[ch].dev_id);
- spin_lock_irqsave(&dma_chan_lock, flags);
- if (dma_chan[ch].dev_id == -1) {
- printk("omap_dma: trying to free nonallocated DMA channel %d\n", ch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
- return;
- }
- dma_chan[ch].dev_id = -1;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
+ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
+ dma_write(1 << ch, IRQSTATUS_L0);
- /* Disable all DMA interrupts for the channel. */
- omap_writew(0, OMAP_DMA_CICR(ch));
- /* Make sure the DMA transfer is stopped. */
- omap_writew(0, OMAP_DMA_CCR(ch));
-}
+ /* If the ch is not chained then chain_id will be -1 */
+ if (dma_chan[ch].chain_id != -1) {
+ int chain_id = dma_chan[ch].chain_id;
+ dma_chan[ch].state = DMA_CH_NOTSTARTED;
+ if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
+ dma_chan[dma_chan[ch].next_linked_ch].state =
+ DMA_CH_STARTED;
+ if (dma_linked_lch[chain_id].chain_mode ==
+ OMAP_DMA_DYNAMIC_CHAIN)
+ disable_lnk(ch);
-int omap_dma_in_1510_mode(void)
-{
- return enable_1510_mode;
-}
+ if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
+ OMAP_DMA_CHAIN_INCQHEAD(chain_id);
-/*
- * lch_queue DMA will start right after lch_head one is finished.
- * For this DMA link to start, you still need to start (see omap_start_dma)
- * the first one. That will fire up the entire queue.
- */
-void omap_dma_link_lch (int lch_head, int lch_queue)
-{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
- BUG();
- return;
+ status = dma_read(CSR(ch));
}
- if ((dma_chan[lch_head].dev_id == -1) ||
- (dma_chan[lch_queue].dev_id == -1)) {
- printk(KERN_ERR "omap_dma: trying to link non requested channels\n");
- dump_stack();
- }
+ dma_write(status, CSR(ch));
- dma_chan[lch_head].next_lch = lch_queue;
+ if (likely(dma_chan[ch].callback != NULL))
+ dma_chan[ch].callback(ch, status, dma_chan[ch].data);
+
+ return 0;
}
-/*
- * Once the DMA queue is stopped, we can destroy it.
- */
-void omap_dma_unlink_lch (int lch_head, int lch_queue)
+/* STATUS register count is from 1-32 while our is 0-31 */
+static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
{
- if (omap_dma_in_1510_mode()) {
- printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
- BUG();
- return;
- }
+ u32 val, enable_reg;
+ int i;
- if (dma_chan[lch_head].next_lch != lch_queue ||
- dma_chan[lch_head].next_lch == -1) {
- printk(KERN_ERR "omap_dma: trying to unlink non linked channels\n");
- dump_stack();
+ val = dma_read(IRQSTATUS_L0);
+ if (val == 0) {
+ if (printk_ratelimit())
+ printk(KERN_WARNING "Spurious DMA IRQ\n");
+ return IRQ_HANDLED;
}
-
-
- if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
- (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
- printk(KERN_ERR "omap_dma: You need to stop the DMA channels before unlinking\n");
- dump_stack();
+ enable_reg = dma_read(IRQENABLE_L0);
+ val &= enable_reg; /* Dispatch only relevant interrupts */
+ for (i = 0; i < dma_lch_count && val != 0; i++) {
+ if (val & 1)
+ omap2_dma_handle_ch(i);
+ val >>= 1;
}
- dma_chan[lch_head].next_lch = -1;
+ return IRQ_HANDLED;
}
+static struct irqaction omap24xx_dma_irq = {
+ .name = "DMA",
+ .handler = omap2_dma_irq_handler,
+ .flags = IRQF_DISABLED
+};
+
+#else
+static struct irqaction omap24xx_dma_irq;
+#endif
+
+/*----------------------------------------------------------------------------*/
static struct lcd_dma_info {
spinlock_t lock;
int reserved;
- void (* callback)(u16 status, void *data);
+ void (*callback)(u16 status, void *data);
void *cb_data;
int active;
lcd_dma.xres = fb_xres;
lcd_dma.yres = fb_yres;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
void omap_set_lcd_dma_src_port(int port)
{
{
lcd_dma.ext_ctrl = external;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
void omap_set_lcd_dma_single_transfer(int single)
{
lcd_dma.single_transfer = single;
}
-
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
void omap_set_lcd_dma_b1_rotation(int rotate)
{
}
lcd_dma.rotate = rotate;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
void omap_set_lcd_dma_b1_mirror(int mirror)
{
}
lcd_dma.mirror = mirror;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
}
lcd_dma.vxres = vxres;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
lcd_dma.xscale = xscale;
lcd_dma.yscale = yscale;
}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
static void set_b1_regs(void)
{
xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
BUG_ON(vxres < lcd_dma.xres);
-#define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
+
+#define PIXADDR(x, y) (lcd_dma.addr + \
+ ((y) * vxres * yscale + (x) * xscale) * es)
#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
switch (lcd_dma.rotate) {
case 0:
if (!lcd_dma.mirror) {
/* 1510 DMA requires the bottom address to be 2 more
* than the actual last memory access location. */
if (omap_dma_in_1510_mode() &&
- lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
- bottom += 2;
+ lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+ bottom += 2;
ei = PIXSTEP(0, 0, 1, 0);
fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
} else {
break;
default:
BUG();
- return; /* Supress warning about uninitialized vars */
+ return; /* Suppress warning about uninitialized vars */
}
if (omap_dma_in_1510_mode()) {
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
/* Always set the source port as SDRAM for now*/
w &= ~(0x03 << 6);
- if (lcd_dma.ext_ctrl)
- w |= 1 << 8;
- else
- w &= ~(1 << 8);
if (lcd_dma.callback != NULL)
- w |= 1 << 1; /* Block interrupt enable */
+ w |= 1 << 1; /* Block interrupt enable */
else
w &= ~(1 << 1);
omap_writew(w, OMAP1610_DMA_LCD_CTRL);
omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
}
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
{
u16 w;
return IRQ_HANDLED;
}
-int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
void *data)
{
spin_lock_irq(&lcd_dma.lock);
return 0;
}
+EXPORT_SYMBOL(omap_request_lcd_dma);
void omap_free_lcd_dma(void)
{
return;
}
if (!enable_1510_mode)
- omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, OMAP1610_DMA_LCD_CCR);
+ omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+ OMAP1610_DMA_LCD_CCR);
lcd_dma.reserved = 0;
spin_unlock(&lcd_dma.lock);
}
+EXPORT_SYMBOL(omap_free_lcd_dma);
void omap_enable_lcd_dma(void)
{
u16 w;
- /* Set the Enable bit only if an external controller is
+ /*
+ * Set the Enable bit only if an external controller is
* connected. Otherwise the OMAP internal controller will
* start the transfer when it gets enabled.
*/
if (enable_1510_mode || !lcd_dma.ext_ctrl)
return;
+
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w |= 1 << 8;
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+ lcd_dma.active = 1;
+
w = omap_readw(OMAP1610_DMA_LCD_CCR);
w |= 1 << 7;
omap_writew(w, OMAP1610_DMA_LCD_CCR);
- lcd_dma.active = 1;
}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
void omap_setup_lcd_dma(void)
{
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
- /* If DMA was already active set the end_prog bit to have
+ /*
+ * If DMA was already active set the end_prog bit to have
* the programmed register set loaded into the active
* register set.
*/
w |= 1 << 11; /* End_prog */
if (!lcd_dma.single_transfer)
- w |= (3 << 8); /* Auto_init, repeat */
+ w |= (3 << 8); /* Auto_init, repeat */
omap_writew(w, OMAP1610_DMA_LCD_CCR);
}
}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
void omap_stop_lcd_dma(void)
{
- lcd_dma.active = 0;
- if (!enable_1510_mode && lcd_dma.ext_ctrl)
- omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~(1 << 7),
- OMAP1610_DMA_LCD_CCR);
-}
+ u16 w;
-/*
- * Clears any DMA state so the DMA engine is ready to restart with new buffers
- * through omap_start_dma(). Any buffers in flight are discarded.
- */
-void omap_clear_dma(int lch)
-{
- unsigned long flags;
- int status;
+ lcd_dma.active = 0;
+ if (enable_1510_mode || !lcd_dma.ext_ctrl)
+ return;
- local_irq_save(flags);
- omap_writew(omap_readw(OMAP_DMA_CCR(lch)) & ~OMAP_DMA_CCR_EN,
- OMAP_DMA_CCR(lch));
- status = OMAP_DMA_CSR(lch); /* clear pending interrupts */
- local_irq_restore(flags);
-}
+ w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ w &= ~(1 << 7);
+ omap_writew(w, OMAP1610_DMA_LCD_CCR);
-/*
- * Returns current physical source address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_src_pos(int lch)
-{
- return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) |
- (OMAP_DMA_CSSA_U(lch) << 16));
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
-/*
- * Returns current physical destination address for the given DMA channel.
- * If the channel is running the caller must disable interrupts prior calling
- * this function and process the returned value before re-enabling interrupt to
- * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
- * in incorrect return value.
- */
-dma_addr_t omap_get_dma_dst_pos(int lch)
-{
- return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) |
- (OMAP_DMA_CDSA_U(lch) << 16));
-}
+/*----------------------------------------------------------------------------*/
static int __init omap_init_dma(void)
{
int ch, r;
- if (cpu_is_omap1510()) {
- printk(KERN_INFO "DMA support for OMAP1510 initialized\n");
+ if (cpu_class_is_omap1()) {
+ omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
+ dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap24xx()) {
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap34xx()) {
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else {
+ pr_err("DMA init failed for unsupported omap\n");
+ return -ENODEV;
+ }
+
+ if (cpu_class_is_omap2() && omap_dma_reserve_channels
+ && (omap_dma_reserve_channels <= dma_lch_count))
+ dma_lch_count = omap_dma_reserve_channels;
+
+ dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
+ GFP_KERNEL);
+ if (!dma_chan)
+ return -ENOMEM;
+
+ if (cpu_class_is_omap2()) {
+ dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
+ dma_lch_count, GFP_KERNEL);
+ if (!dma_linked_lch) {
+ kfree(dma_chan);
+ return -ENOMEM;
+ }
+ }
+
+ if (cpu_is_omap15xx()) {
+ printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
dma_chan_count = 9;
enable_1510_mode = 1;
- } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
+ } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
printk(KERN_INFO "OMAP DMA hardware version %d\n",
- omap_readw(OMAP_DMA_HW_ID));
+ dma_read(HW_ID));
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
- (omap_readw(OMAP_DMA_CAPS_0_U) << 16) | omap_readw(OMAP_DMA_CAPS_0_L),
- (omap_readw(OMAP_DMA_CAPS_1_U) << 16) | omap_readw(OMAP_DMA_CAPS_1_L),
- omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
- omap_readw(OMAP_DMA_CAPS_4));
+ (dma_read(CAPS_0_U) << 16) |
+ dma_read(CAPS_0_L),
+ (dma_read(CAPS_1_U) << 16) |
+ dma_read(CAPS_1_L),
+ dma_read(CAPS_2), dma_read(CAPS_3),
+ dma_read(CAPS_4));
if (!enable_1510_mode) {
u16 w;
/* Disable OMAP 3.0/3.1 compatibility mode. */
- w = omap_readw(OMAP_DMA_GSCR);
+ w = dma_read(GSCR);
w |= 1 << 3;
- omap_writew(w, OMAP_DMA_GSCR);
+ dma_write(w, GSCR);
dma_chan_count = 16;
} else
dma_chan_count = 9;
+ if (cpu_is_omap16xx()) {
+ u16 w;
+
+ /* this would prevent OMAP sleep */
+ w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+ w &= ~(1 << 8);
+ omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+ }
+ } else if (cpu_class_is_omap2()) {
+ u8 revision = dma_read(REVISION) & 0xff;
+ printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+ revision >> 4, revision & 0xf);
+ dma_chan_count = dma_lch_count;
} else {
dma_chan_count = 0;
return 0;
}
- memset(&lcd_dma, 0, sizeof(lcd_dma));
spin_lock_init(&lcd_dma.lock);
spin_lock_init(&dma_chan_lock);
- memset(&dma_chan, 0, sizeof(dma_chan));
for (ch = 0; ch < dma_chan_count; ch++) {
+ omap_clear_dma(ch);
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
if (ch >= 6 && enable_1510_mode)
continue;
- /* request_irq() doesn't like dev_id (ie. ch) being zero,
- * so we have to kludge around this. */
- r = request_irq(dma_irq[ch], dma_irq_handler, 0, "DMA",
- (void *) (ch + 1));
+ if (cpu_class_is_omap1()) {
+ /*
+ * request_irq() doesn't like dev_id (ie. ch) being
+ * zero, so we have to kludge around this.
+ */
+ r = request_irq(omap1_dma_irq[ch],
+ omap1_dma_irq_handler, 0, "DMA",
+ (void *) (ch + 1));
+ if (r != 0) {
+ int i;
+
+ printk(KERN_ERR "unable to request IRQ %d "
+ "for DMA (error %d)\n",
+ omap1_dma_irq[ch], r);
+ for (i = 0; i < ch; i++)
+ free_irq(omap1_dma_irq[i],
+ (void *) (i + 1));
+ return r;
+ }
+ }
+ }
+
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
+ omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
+ DMA_DEFAULT_FIFO_DEPTH, 0);
+
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
+
+ /* Enable smartidle idlemodes and autoidle */
+ if (cpu_is_omap34xx()) {
+ u32 v = dma_read(OCP_SYSCONFIG);
+ v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
+ DMA_SYSCONFIG_SIDLEMODE_MASK |
+ DMA_SYSCONFIG_AUTOIDLE);
+ v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
+ DMA_SYSCONFIG_AUTOIDLE);
+ dma_write(v , OCP_SYSCONFIG);
+ }
+
+
+ /* FIXME: Update LCD DMA to work on 24xx */
+ if (cpu_class_is_omap1()) {
+ r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+ "LCD DMA", NULL);
if (r != 0) {
int i;
- printk(KERN_ERR "unable to request IRQ %d for DMA (error %d)\n",
- dma_irq[ch], r);
- for (i = 0; i < ch; i++)
- free_irq(dma_irq[i], (void *) (i + 1));
+ printk(KERN_ERR "unable to request IRQ for LCD DMA "
+ "(error %d)\n", r);
+ for (i = 0; i < dma_chan_count; i++)
+ free_irq(omap1_dma_irq[i], (void *) (i + 1));
return r;
}
}
- r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, "LCD DMA", NULL);
- if (r != 0) {
- int i;
- printk(KERN_ERR "unable to request IRQ for LCD DMA (error %d)\n", r);
- for (i = 0; i < dma_chan_count; i++)
- free_irq(dma_irq[i], (void *) (i + 1));
- return r;
- }
return 0;
}
arch_initcall(omap_init_dma);
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+ if (get_option(&str, &omap_dma_reserve_channels) != 1)
+ omap_dma_reserve_channels = 0;
+ return 1;
+}
-EXPORT_SYMBOL(omap_get_dma_src_pos);
-EXPORT_SYMBOL(omap_get_dma_dst_pos);
-EXPORT_SYMBOL(omap_clear_dma);
-EXPORT_SYMBOL(omap_set_dma_priority);
-EXPORT_SYMBOL(omap_request_dma);
-EXPORT_SYMBOL(omap_free_dma);
-EXPORT_SYMBOL(omap_start_dma);
-EXPORT_SYMBOL(omap_stop_dma);
-EXPORT_SYMBOL(omap_enable_dma_irq);
-EXPORT_SYMBOL(omap_disable_dma_irq);
-
-EXPORT_SYMBOL(omap_set_dma_transfer_params);
-EXPORT_SYMBOL(omap_set_dma_color_mode);
-
-EXPORT_SYMBOL(omap_set_dma_src_params);
-EXPORT_SYMBOL(omap_set_dma_src_index);
-EXPORT_SYMBOL(omap_set_dma_src_data_pack);
-EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
-
-EXPORT_SYMBOL(omap_set_dma_dest_params);
-EXPORT_SYMBOL(omap_set_dma_dest_index);
-EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
-EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
-
-EXPORT_SYMBOL(omap_dma_link_lch);
-EXPORT_SYMBOL(omap_dma_unlink_lch);
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
-EXPORT_SYMBOL(omap_request_lcd_dma);
-EXPORT_SYMBOL(omap_free_lcd_dma);
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-EXPORT_SYMBOL(omap_stop_lcd_dma);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff