#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <mach/time.h>
/*
* IQ80321 timer tick configuration.
static void __init iq80321_timer_init(void)
{
/* 33.333 MHz crystal. */
- iop3xx_init_time(200000000);
+ iop_init_time(200000000);
}
static struct sys_timer iq80321_timer = {
.init = iq80321_timer_init,
- .offset = iop3xx_gettimeoffset,
};
/*
* IQ80321 PCI.
*/
-static inline int __init
+static int __init
iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if ((slot == 2 || slot == 6) && pin == 1) {
/* PCI-X Slot INTA */
- irq = IRQ_IOP321_XINT2;
+ irq = IRQ_IOP32X_XINT2;
} else if ((slot == 2 || slot == 6) && pin == 2) {
/* PCI-X Slot INTA */
- irq = IRQ_IOP321_XINT3;
+ irq = IRQ_IOP32X_XINT3;
} else if ((slot == 2 || slot == 6) && pin == 3) {
/* PCI-X Slot INTA */
- irq = IRQ_IOP321_XINT0;
+ irq = IRQ_IOP32X_XINT0;
} else if ((slot == 2 || slot == 6) && pin == 4) {
/* PCI-X Slot INTA */
- irq = IRQ_IOP321_XINT1;
+ irq = IRQ_IOP32X_XINT1;
} else if (slot == 4 || slot == 8) {
/* Gig-E */
- irq = IRQ_IOP321_XINT0;
+ irq = IRQ_IOP32X_XINT0;
} else {
printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
- .preinit = iop3xx_pci_preinit,
+ .preinit = iop3xx_pci_preinit_cond,
.scan = iop3xx_pci_scan_bus,
.map_irq = iq80321_pci_map_irq,
};
static int __init iq80321_pci_init(void)
{
- if (machine_is_iq80321())
+ if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
+ machine_is_iq80321())
pci_common_init(&iq80321_pci);
return 0;
{
.mapbase = IQ80321_UART,
.membase = (char *)IQ80321_UART,
- .irq = IRQ_IOP321_XINT1,
+ .irq = IRQ_IOP32X_XINT1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iq80321_flash_device);
platform_device_register(&iq80321_serial_device);
+ platform_device_register(&iop3xx_dma_0_channel);
+ platform_device_register(&iop3xx_dma_1_channel);
+ platform_device_register(&iop3xx_aau_channel);
}
MACHINE_START(IQ80321, "Intel IQ80321")
.io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = iq80321_map_io,
- .init_irq = iop321_init_irq,
+ .init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
.init_machine = iq80321_init_machine,
MACHINE_END