select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
- select HAVE_OPROFILE
+ select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
+ select HAVE_KERNEL_LZMA
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
help
config GENERIC_TIME
bool
+ default y
+
+config ARCH_USES_GETTIMEOFFSET
+ bool
+ default n
config GENERIC_CLOCKEVENTS
bool
help
Setting ARM L1 cache line size to 64 Bytes.
-if OPROFILE
-
-config OPROFILE_ARMV6
- def_bool y
- depends on CPU_V6 && !SMP
- select OPROFILE_ARM11_CORE
-
-config OPROFILE_MPCORE
- def_bool y
- depends on CPU_V6 && SMP
- select OPROFILE_ARM11_CORE
-
-config OPROFILE_ARM11_CORE
- bool
-
-config OPROFILE_ARMV7
- def_bool y
- depends on CPU_V7 && !SMP
- bool
-
-endif
-
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
+#
+# The "ARM system type" choice list is ordered alphabetically by option
+# text. Please add new entries in the option alphabetic order.
+#
choice
prompt "ARM system type"
default ARCH_VERSATILE
select CPU_ARM920T
select ARM_AMBA
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Agilent AAEC-2000
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARCH_HAS_CPUFREQ
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST525
+ select ICST
+ select GENERIC_CLOCKEVENTS
+ select PLAT_VERSATILE
help
Support for ARM's Integrator platform.
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST307
- select GENERIC_TIME
+ select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select PLAT_VERSATILE
+ select ARM_TIMER_SP804
+ select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
- select HAVE_CLK
select COMMON_CLKDEV
- select ICST307
- select GENERIC_TIME
+ select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select PLAT_VERSATILE
+ select ARM_TIMER_SP804
help
This enables support for ARM Ltd Versatile board.
+config ARCH_VEXPRESS
+ bool "ARM Ltd. Versatile Express family"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_TIMER_SP804
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select ICST
+ select PLAT_VERSATILE
+ help
+ This enables support for the ARM Ltd Versatile Express boards.
+
config ARCH_AT91
bool "Atmel AT91"
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ help
+ Support for Broadcom's BCMRing platform.
+
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_CNS3XXX
+ bool "Cavium Networks CNS3XXX family"
+ select CPU_V6
+ select GENERIC_CLOCKEVENTS
+ select ARM_GIC
+ help
+ Support for Cavium Networks CNS3XXX platform.
+
config ARCH_GEMINI
bool "Cortina Systems Gemini"
select CPU_FA526
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the Cortina Systems Gemini family SoCs
select CPU_SA110
select ISA
select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
select CPU_ARM920T
select ARM_AMBA
select ARM_VIC
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for the Cirrus EP93xx series of CPUs.
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
+ select ARCH_USES_GETTIMEOFFSET
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_MXC
bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
+ select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
config ARCH_STMP3XXX
bool "Freescale STMP3xxx"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select USB_ARCH_HAS_EHCI
help
Support for systems based on the Freescale 3xxx CPUs.
select CPU_ARM926T
select ARM_VIC
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
help
This enables support for systems based on the Hilscher NetX Soc
bool "Hynix HMS720x-based"
select CPU_ARM720T
select ISA_DMA_API
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_NOMADIK
- bool "STMicroelectronics Nomadik"
- select ARM_AMBA
- select ARM_VIC
- select CPU_ARM926T
- select HAVE_CLK
- select COMMON_CLKDEV
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for the Nomadik platform by ST-Ericsson
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
select CPU_XSCALE
select PLAT_IOP
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's 80219 and IOP32X (XScale) family of
select CPU_XSCALE
select PLAT_IOP
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
Support for Intel's IOP33X (XScale) family of processors.
depends on MMU
select CPU_XSC3
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP23xx (XScale) family of processors.
depends on MMU
select CPU_XSCALE
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
depends on MMU
select CPU_XSCALE
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select DMABOUNCE if PCI
help
bool "LinkUp-L7200"
select CPU_ARM720T
select FIQ
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor.
config ARCH_DOVE
bool "Marvell Dove"
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
bool "Marvell Kirkwood"
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
bool "Marvell MV78xx0"
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
depends on MMU
select CPU_FEROCEON
select PCI
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
Orion-2 (5281), Orion-1-90 (6183).
config ARCH_MMP
- bool "Marvell PXA168/910"
+ bool "Marvell PXA168/910/MMP2"
depends on MMU
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
config ARCH_KS8695
bool "Micrel/Kendin KS8695"
select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
+ select ARCH_USES_GETTIMEOFFSET
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
bool "NetSilicon NS9xxx"
select CPU_ARM926T
select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
bool "Nuvoton W90X900 CPU"
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for Nuvoton (Winbond logic dept.) ARM9 processor,
config ARCH_NUC93X
bool "Nuvoton NUC93X CPU"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
help
Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
- select HAVE_CLK
select COMMON_CLKDEV
+ select ARCH_USES_GETTIMEOFFSET
help
This enables support for Philips PNX4008 mobile platform.
depends on MMU
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
- select GENERIC_GPIO
- select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
config ARCH_MSM
bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
+ select HAVE_CLK
select GENERIC_CLOCKEVENTS
help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
+ Support for Qualcomm MSM/QSD based systems. This runs on the
+ apps processor of the MSM/QSD and depends on a shared memory
+ interface to the modem processor which runs the baseband
+ stack and controls some vital subsystems
+ (clock and power control, etc).
+
+config ARCH_SHMOBILE
+ bool "Renesas SH-Mobile"
+ help
+ Support for Renesas's SH-Mobile ARM platforms
config ARCH_RPC
bool "RiscPC"
select ISA_DMA_API
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_USES_GETTIMEOFFSET
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
select ARCH_MTD_XIP
select ARCH_HAS_CPUFREQ
select CPU_FREQ
- select GENERIC_GPIO
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
+ select ARCH_USES_GETTIMEOFFSET
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
+ Note, the S3C2416 and the S3C2450 are so close that they even share
+ the same SoC ID code. This means that there is no seperate machine
+ directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
config ARCH_S3C64XX
bool "Samsung S3C64XX"
- select GENERIC_GPIO
+ select PLAT_SAMSUNG
+ select CPU_V6
+ select ARM_VIC
select HAVE_CLK
+ select NO_IOPORT
+ select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ select SAMSUNG_IRQ_UART
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
+ select USB_ARCH_HAS_OHCI
+ select SAMSUNG_GPIOLIB_4BIT
help
Samsung S3C64XX series based systems
+config ARCH_S5P6440
+ bool "Samsung S5P6440"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6440 CPU based systems
+
+config ARCH_S5P6442
+ bool "Samsung S5P6442"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6442 CPU based systems
+
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select GENERIC_GPIO
help
Samsung S5PC1XX series based systems
+config ARCH_S5PV210
+ bool "Samsung S5PV210/S5PC110"
+ select CPU_V7
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select ARM_L1_CACHE_SHIFT_6
+ help
+ Samsung S5PV210/S5PC110 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
select ISA_DMA
select ZONE_DMA
select PCI
+ select ARCH_USES_GETTIMEOFFSET
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
select CPU_ARM922T
select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+ select ARCH_USES_GETTIMEOFFSET
help
Say Y here for systems based on one of the Sharp LH7A40X
System on a Chip processors. These CPUs include an ARM922T
select HAVE_TCM
select ARM_AMBA
select ARM_VIC
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_GPIO
help
Support for ST-Ericsson U300 series mobile platforms.
+config ARCH_U8500
+ bool "ST-Ericsson U8500 Series"
+ select CPU_V7
+ select ARM_AMBA
+ select GENERIC_CLOCKEVENTS
+ select COMMON_CLKDEV
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for ST-Ericsson's Ux500 architecture
+
+config ARCH_NOMADIK
+ bool "STMicroelectronics Nomadik"
+ select ARM_AMBA
+ select ARM_VIC
+ select CPU_ARM926T
+ select COMMON_CLKDEV
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Nomadik platform by ST-Ericsson
+
config ARCH_DAVINCI
bool "TI DaVinci"
- select CPU_ARM926T
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
config ARCH_OMAP
bool "TI OMAP"
- select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_HAS_HOLES_MEMORYMODEL
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_BCMRING
- bool "Broadcom BCMRING"
- depends on MMU
- select CPU_V6
+config PLAT_SPEAR
+ bool "ST SPEAr"
select ARM_AMBA
+ select ARCH_REQUIRE_GPIOLIB
select COMMON_CLKDEV
- select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select HAVE_CLK
help
- Support for Broadcom's BCMRing platform.
-
-config ARCH_U8500
- bool "ST-Ericsson U8500 Series"
- select CPU_V7
- select ARM_AMBA
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select COMMON_CLKDEV
- help
- Support for ST-Ericsson's Ux500 architecture
+ Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
endchoice
+#
+# This is sorted alphabetically by mach-* pathname. However, plat-*
+# Kconfigs may be included either alphabetically (according to the
+# plat- suffix) or along side the corresponding mach-* source.
+#
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
+source "arch/arm/mach-cns3xxx/Kconfig"
+
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-dove/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
+source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
endif
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6440/Kconfig"
+
+source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-vexpress/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
config PLAT_IOP
bool
select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
config PLAT_ORION
bool
config PLAT_PXA
bool
+config PLAT_VERSATILE
+ bool
+
+config ARM_TIMER_SP804
+ bool
+
source arch/arm/mm/Kconfig
config IWMMXT
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
VESA. If you have PCI, say Y, otherwise N.
+config PCI_DOMAINS
+ bool
+ depends on PCI
+
config PCI_SYSCALL
def_bool PCI
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+ ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
config HZ
int
default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default 100
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+ depends on PERF_EVENTS && CPU_HAS_PMU
default y
help
Enable hardware performance counter support for perf events. If
time by entering them here. As a minimum, you should specify the
memory size and the root device (e.g., mem=64M root=/dev/nfs).
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ depends on CMDLINE != ""
+ help
+ Always use the default kernel command string, even if the boot
+ loader passes other arguments to the kernel.
+ This is useful if you cannot or don't want to change the
+ command-line options your boot loader passes to the kernel.
+
+ If unsure, say N.
+
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on !ZBOOT_ROM
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff